Hardware :: Network Card - Always Makes Kernel Messages ?
Dec 16, 2008I'm having intermittent trouble with my network card.
It always makes kernel messages like the following:
Code:
ADVERTISEMENT
OpenSUSE Wireless :: Add Network Card Support To Kernel?
May 18, 2010I'm using asus usb n-11 wireless adapter.Default kernel module drivers/staging/rt2870sta.ko hasn't id of my adapter. Please add this two strings to next kernel release
--- drivers/staging/rt2870/rt2870.h 2010-05-18 13:09:13.262882659 +0400
+++ drivers/staging/rt2870/rt2870.h 2010-05-18 12:10:20.000000000 +0400
@@ -85,6 +85,8 @@
[code]....
CentOS 5 Hardware :: 3c2000 Network Card And Kernel Sources?
Jul 24, 2011I am trying to get Centos V 5.5 working on my old P4P800 Asus motherboard . This motherboard has an inbuilt 3c2000 1Gbit NIC. I know from previous experience that it does not work with a standard kernel. So as the network card doesn't work I cannot connect to standard repositories. The Kernel source does not seem to be in the main install DVD so have downloaded [URL].. files from another machine. and loaded them onto the local drive. uname -r reports kernel 2.6.18-194.el5 however there are many kernel src files in the RPMS directory and yum install kernel-2.6.18-194.8.el5 through kernel-2.6.18-194.32.el5 report Nothing to do or incompatible achitechture ? I also notice that make install for the 3c2000 tar file I have doesn't work either. I know Centos is locked down more than the previous Mandrake 9.2 Install was under Mandrake a urpmi kernel-source, make install of the driver code and insmod 3c2000 was all that was needed.I am still pretty new to linux and just need some pointers on what needs to be installed and to identify what centos is looking for?
View 9 Replies View RelatedGeneral :: What Makes Fuse Different From Kernel Filesystem
Jul 19, 2011I am looking for a way to do deduplication for my Virtual Machines, I found a project called OpenDudup. It looks promising, it says it needs fuse as a dependency. After looking up what fuse is, it left me with another question. What make a file system is user space different from a file system in kernel space?
View 1 Replies View RelatedNetworking :: Unable To Configure The Network Card Because The Kernel Device Is Not Present
Jan 28, 2010I have installed Linux SuSE 10.3 on a PC (Lenovo Thinkstation A58). However, when I start the computer I get the following error message:
"No valid Host_ID or host-name found."
I then use YaST to set up the network. I get the following error message:
"Unable to configure the network card because the kernel device is not present."
The computer has Windows 7 installed and everything seems to work fine. The LED on the Ethernetplug is blinking when using Windows, but not when using Linux. I guess this means that there is no driver for the Ethernet card (Marvell Yukon 88E8057). I have not found any driver for the card and am considering buying a new one. Which PCI card works with SuSE Linux 10.3?
Fedora :: Kernel 2.6.35.10-72.fc14 Makes The F14 Hang Constantly Without Any Hint?
Dec 26, 2010I tried this kernel released on Dec 21th. It makes my F14 constantly suddenly freeze in GUI with no keyboard/mouse response anymore before restart. Only thing to do in this situation is press power-off button and after restart I found no hint in logs.My laptop is thinkpad t400 and I think it's a very common installation.Now I revert to older kernel 2.6.35.9-64.fc14.i686 and it's works quite well.
View 14 Replies View RelatedOpenSUSE Hardware :: Realtek NIC Installation - Unable To Configure The Network Card Because Kernel Device (eth0, Wlan0) Is Not Present
Nov 30, 2010Installed a TP-Link TG-3269 Gigabit card in a machine running OS 11.3 32 bit, when I go into Yast, Network Devices, Network to try configuring the card I get this errormsg: Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details. Couldn't find any mention of the card in dmesg's output, (though the 8139 onboard card is in there) there is some stuff about pci host bridge but I don't know whether they would be relevant or not
The chip on the card says it's rtl8169sc but lspci lists it as being 00:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. Device 8369 (rev 10) Done some googling and there don't seem be any drivers for a Realtek 8639 and it returns no matches from a search on realtek's site, but there is a driver there for rtl8169sc chips, which I downloaded and installed, no errors when installing it Even after a reboot I still get the same error in Yast's Network Settings screen, lspci still lists it as 8369 and the device isn't listed at all if I run ifconfig
Ubuntu Networking :: Configuring The Network Interface Via Dhcp - Network Messages - Code: 00 55 89 E5 0f 1f 44 00 00 Fa 5d C3 90 8d 74 26
Apr 7, 2011I am totally new to Linux and have just installed ubuntu 10.10. After configuring the network interface via dhcp I started getting these messages that come in so frequently I can't configure anything else.
[87.186415] Stack:
Why I am getting this messages and more importantly how do I get rid of them.
The installation is on a VM on Hyper-V.
Fedora Networking :: Bittorrent Impact On Network Makes No Sense?
May 26, 2011I noticed my Internet slows to a crawl when I'm running bittorrent, but when I look at my torrent app (Transmission), the upload/download speeds are mere kilobytes per second, and my Internet has much higher bandwidth capabilities than that.So I tested it:No torrent running
(ping: 13 ms, down: 11.39 mb/s, up: 2.80 mb/s)
Torrent running
(ping: 752 ms, down: 4.30 mb/s, up: 0.19 mb/s)
[code]....
OpenSUSE :: Change_hat Kernel Messages?
Dec 17, 2010on a SuSE-11.3 (xen domU) I repeatedly notice the following messages:
Dec 17 19:30:01 MTW kernel: [22484.319192] type=1503 audit(1292610601.862:84): operation="change_hat" info="unconfined" error=-1 pid=22001
Dec 17 19:30:01 MTW kernel: [22484.319222] type=1503 audit(1292610601.862:85): operation="change_hat" info="unconfined" error=-1 pid=22001
Dec 17 19:45:01 MTW kernel: [23384.365597] type=1503 audit(1292611501.910:86): operation="change_hat" info="unconfined" error=-1 pid=22702
[code]...
Security :: Mail Kernel - Messages
Mar 11, 2011My /var/log/messages file is being flooded by messages like these.
Code:
Red Hat :: Disabling Kernel Messages On Console?
May 17, 2010is there any way to disable kernel messages on the console? The problem I have is that it is almost impossible to work on the console due to a flood of file system errors from the kernel.
I've checked /etc/syslog.conf and disabled kernel logging to the console. Even with syslog turned off the messages still flood the console.
Fedora :: Received Two Kernel Failure Messages In 11
Mar 4, 2010I have just installed Fedora 11 to my laptop and it appears I am in trouble. I have received two kernel failure messages, which I post below. What are the consequences of these issues and how can I solve them ?
Message 1:
Message 2:
General :: Direct Kernel Messages To COM Port?
Mar 31, 2010I need to debug a kernel panic. It prints some long log to the console, but even if i set 1920x1440 VESA framebuffer mode, i can't see it whole.
So, i would like to direct all the kernel messages to a COM port and read them on another machine. Is there any way of doing so? What are the other (maybe better/easier/etc.) ways of catching whole kernel panic messages or scrolling the ones already displayed?
Server :: Kernel: Printk - 3 Messages Suppressed
Aug 12, 2010I've got this lines in /var/log/messages Server is running varnish-cache
View 1 Replies View RelatedFedora :: Saving Kernel Shutdown Messages As Text?
Jan 30, 2010When my computer shuts down, I always get a long error message from the kernel. It's the very last thing the computer does and I can't even use the keyboard, since the system is halted. I wanted to read it more carefully (it's very long and doesn't fit the screen) and file a bug report against the kernel with it. But for that, I needed to save all that text in a file.
View 1 Replies View RelatedGeneral :: Pipe Kernel Messages To Another Process As They Occur
Apr 13, 2011I have an OLED screen on my laptop that I have configured to show status information. The current driver I have installed in Linux for it is able to display messages by sending them to a script as an argument separated by spaces.Example: the command /opt/asusg50oled/utils/notify.sh Hi Everybody "Hello World" displays on the oled screen:
Hi
Everybody
Hello World
If another message is sent before the old ones disappear and it reverts to status info, it pushes off the top message. Example: less than 30 seconds after the previous example, /opt/asusg50oled/utils/notify.sh "Bananas have potassium" is executed:
Everybody
Hello World
Bananas have potassium
What I want to do is have kernel messages (the kind you see by running dmesg) forwarded to this script. For example, when I insert a USB drive, the following information would show on the OLED screen as they're logged:........
Ubuntu Installation :: Kernel Messages And Display Becomes Corrupted
Feb 1, 2011Recently I am trying to install the latest Ubuntu / Xubuntu but after the kernel messages the display becomes corrupted. The machine is a Clevo laptop with the dreaded SIS 671 / 672 chipset. The Ubuntu 8.04 is working flawlessly. Any other version I get several problems and depending on the mood of the system I get a vertical running display ( not readable ) or a left horizontal displaced screen (readable) ...
I tried more tan several CDs ranging from 9.01 to 10.10 both Ubuntu or Xubuntu. What is the plainest (simpler ) VGA mode in order to install it? I have tried vga=normal and even VGA =3 with no success. With the latest Ubuntu 10.10 I get another problem it simply does not recognize the HDD / SSD. I have traced the SSD problem with the sata_sis module in kernel 2.6.35 and up... Other distros have the same problem ...
Fedora :: Kernel: Imklog Continuously Generating Error Messages
Oct 4, 2010I am using latest updated Fedora 13 (presently kernel-2.6.34.7-56.fc13.i686).
kernel imklog error messages fills my hard disk again and again, /var/log/messages file becomes more than 5Gb daily.
the /var/log/messages file contains following entries:
Sep 27 10:35:09 arun kernel: imklog 4.4.2, log source = /proc/kmsg started.
Sep 27 10:35:09 arun rsyslogd: [origin software="rsyslogd" swVersion="4.4.2" x-pid="1083" x-info="http://www.rsyslog.com"] (re)start
Sep 27 10:35:09 arun atd[19007]: File a0000b0145c567 is in wrong format - aborting
[Code]....
I think, I can stop kernel logging from /etc/rsyslog.conf, but I wanted to know the real problem.
OpenSUSE Install :: Autologin - Syslog - Kernel Messages - Console
May 9, 2010What i'm trying to accomplish seems rather silly but is needed for my little project here.
I'm using OpenSuSE 11.2 as a media center PC and need it to login automatically(console not X). That one i accomplished without problems.
However, after login i can see all the info about the services that were started and that needs to "go away".
One could do a "clear" in the .bash_rc and or .bash_profile but it will still show the login prompt which i don't want to see either (i don't even want to see the blinking cursor as well).
Question: How do i accomplish that so that the login console shows only the "splash screen" without any output of the kernel,rc.status nor the "issue-file"... just a plain blank screen ?
Ubuntu Servers :: Redirect Messages From Kernel Ringbuffer To A Logfile?
Aug 2, 2010Is there a way I can redirect messages from kernel ringbuffer to a logfile, e.g. with rsyslogd? With redirect I mean that the messages do no longer appear in dmesg, but only in the logfile.
In my case that should be iptables log messages.
Ubuntu :: Autodetection Of Network Printers Makes All Printers Disappear?
Jan 28, 2010I've been using Kubuntu 9.10 for several months now. For most of that time, I configured and used with no problem several network printers.. a HP LaserJet 3015 at home connected to a Windows machine, and a Xerox Phaser 8560 at my coworking space connected directly to a router.
However, several weeks ago I was at the coworking space, requested a print from my web browser, and in the printer selection dialog, observed the list of printers expanding... some sort of autodetection of network printers was occuring, and multiple instances of the same printer were being offered, with slightly different names. Printing to these devices did not work.
Now, after a reboot, there are NO network printers available no matter what network I'm connected to. When I use the Kubuntu printer configuration tool and try to set up a new printer, it asks me to "Select a connection" to which the only option it gives me is "Other". When I put in an address for the printer it just cycles endlessly, never finding anything.
Networking :: Long Messages Fragment Over Network?
Oct 7, 2010I have a RHEL 4 server delivering long messages to several RHEL 4 clients. They work fine.I am trying a RHEL 5 client running the same client application as the RHEL 4 clients. The RHEL 5 client looses most messages. have tried with two other clients running CentOS 5 with similar results. The server indicates write failure or blocked. The messages are typically 50 kilobytes. I have changed many parameters in sysctl.conf Has anyone encountered similar problems?
View 3 Replies View RelatedFedora :: Noisy Network Manager - Tell To Not Log So Many Messages To The System Log?
Mar 23, 2010Is there anyway to tell NetworkManager to not log so many messages to the system log? There appears to be a bazillion <info> messages in the log file (/var/log/messages). It makes it hard to find any potential problem areas...
View 1 Replies View RelatedOpenSUSE Network :: Sendmail - Large Messages Only Queueing?
Jun 24, 2010I've got a strange sendmail problem I've never come across before...Messages less that 2500 lines (approx 169kb) are sent correctly - anything else goes straight into the queue and is never delivered. The server sits in a intranet, is not connected to the outside world, and forwards its mail to a smart host.All configuration has been done through yast, so there are no unusual settings. I've run sendmail on SuSE from version 6 upwards, and this is the first time I've come across this - it's driving me potty
View 4 Replies View RelatedOpenSUSE Network :: When Disable Firewall / Delayed Messages Can Again Be Sent
Sep 14, 2011I have been running Senmail on SuSE 11.1 for the last few years with no problems.Since installing SuSE 11.3 a few months ago I have been having problems getting Sendmail to send to some (only a few) servers.If I disable the firewall # SuSEFirewall2 stop.I can send successfully using # sendmail -v -q, or # sendmail -v -qIxxxxx.When I re-enable the firewall I will start to get the timeouts/temporarily unavailable messages again (but as mentioned above, only for some servers) even though I can successfully telnet these servers when the firewall is on. When I disable the firewall the delayed messages can again be sent.Has anybody any ideas what I need to change (presumably in the Firewall) to get things working correctly? 'SMTP with sendmail' is already selected under 'Services to Allow' under YaST Firewall->Allowed Services..
View 4 Replies View RelatedCentOS 5 :: Sending Messages Between Local Network Machines?
Jul 3, 2010i am using centos 5.4 (5.5?) gnome on multiple machines in a local network.is there a program available that does the following:you type a message in a 'note'screen on one computer and can send it to one (to choose) or all machines in the local network that are online, so you can read the message on these other machines screens.
View 6 Replies View RelatedFedora Servers :: Setting Up Network In The Right Way + Wake On Unicast Messages?
Jul 11, 2010I have a Fedora server at home. I don't want it to be running all the time to reduce the power usage and be more green It only works , whet it is really needed. So when it is not in use (no ssh or http connections have been active for some time), a custom python script suspends it. I have set it to wake up on unicast messages, so when somebody connects to it, the server wakes up.In Fedora 12 everything worked fine: when the server was sleeping and you connected to it using ssh or a web browser, the client waited for couple of seconds until the server was up and then connected (actually it worked even when server was turned off: the command "ssh [user]@[server]" just waited until server was booted up and then connected.)
Now I installed Fedora 13 on the server. When I try to connect to the server when it's sleeping, the client waits for some time (and server wakes up), then the connection just times out. When I try to connect again, it works. When server is up and running, I can connect to it. So when it is sleeping I have to connect twice: first to wake it up and then connect again to log in.Do you have any ideas what is causing this problem, as it is really annoying for me and I don't want to have it running all the day.Also, I have not set up the network in the best way, I think. To start the network at boot, i have put the command
Code:
ifup eth0
to /etc/rc.local.
To start the network when resurming from suspend, I have creted a script with the same command in /usr/lib64/pm-utils/sleep.d. It works, but it does not seam to be the *right* way to do this. Maybe this is also causing the first problem. So how have you managed to get a working network connection on your Fedora 13 headless server?
OpenSUSE Network :: Firewall Sending Messages For Allowed Port?
Mar 23, 2010In the firewall, I opened port 5900 for TCP traffic. Now the console is displaying packet information whenever a connection is made. Why does it send a message to stdout/stderr for an allowed connection? How can I stop it? Logging level is set to critical only, and not-accepted packets should only be logged for the internal and DMZ zones.
View 1 Replies View RelatedOpenSUSE Network :: Rsync Freezes Whole Computer Without Error Messages
Feb 26, 2011I am currently facing a problem with rsync (or maybe ssh, I don't know yet). I have daily backups that are done via cron using rsync from my computer (client) to a NAS. And systematically during these backups my computer completely freezes (no remote login possible, nothing), so I have to hard reboot. As you might imagine, I cannot do this every day. In /var/log/messages there is just a line like that :
Feb 26 17:23:53 eggplant rsyslogd: -- MARK --
right before the hang. The rsync worked well before and I don't really know what changed in my system config. In /var/log/rsyncd.log I sometimes (but not every time) I get :
2011/02/26 16:39:19 [13229] rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(543) [Receiver=3.0.7]
I aldready update the default rsync from opensuse 11.3 to 3.0.7.7, but it does not help. How can I at least know what is going wrong? I am trying to track down the problem but don't know how to start. Last also a log of the rsync command (client) running ssh in verbose using the command "rsync -av --delete --timeout=180 -e "ssh -v -p xxxxxx -i /root/.ssh/rsync-key_eggplant" /mds root@xxxxxxxx:/volume1/autoBackup/eggplant":
OpenSSH_5.4p1, OpenSSL 1.0.0 29 Mar 2010
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[code]....