Slackware :: Kernel Hang During Boot Process - Slack 13.1 Stable W/ Kernel 2.6.33.4-smp
Jun 20, 2010
I installed a fresh copy of Slackware 13.1 (stable) on one of my media servers and I am experiencing something strange.... When I power up the machine, I see the kernel booting, no errors, until it gets to the point where it says:
And then randomly freeze there.... Well the machine is not totally frozen because the cursor still blinks. But it will never continue... Like I said, this happens on a random basis... After a reset, it might go through or simply stall at the same spot.
I remember after installing Slack 13.1, I rebooted the machine but forgot to remove the DVD from the player, so the install routine started up, and froze at the same point when it was loading the kernel for the setup programs...
My mobo is a MSI k9N platinum.
I never had this problem before.... (well I never used 13.1 before). Since I got this machine, I used slack 12.2 and slack 13-current with success.
This problem makes the machine extremely unreliable because I intent to use it as a backup and media server, so chances I will WOL the machine and use it remotely... if that happens.
View 10 Replies
ADVERTISEMENT
May 5, 2010
can I upgrade the kernel on my slack 12.2 to the version 2.6.29 or higher?I need the kernel must support the KMS mechanism.Why I need KMS? I want to define virtual screen of size greater than 2048 x 2048. Why I need so huge virtual screen?To run two-display configuration on my dual-head Intel graphic card. At the moment I can set max 2048 x 2048 virtual screen which is not enough for my two displays:LCD of notebook has 1400 x 1050 resolution, and external LCD panel 1280 x 1024. At this moment a part of desktop is on both displays. Small part but causes some problems, and at this moment only awesome (really awesome) window manager can handle this configuration.
View 9 Replies
View Related
Jun 10, 2011
i want to do is dual boot windows, Slackware, and Debian. I don't care if i use lilo or grub, they are both equally familiar to me, just above nort. i have made attempts at editing the lilo.conf file, which said it had warnings but i didn't know how to view the warnings. It made it so i could select it, but when i did it booted the slack kernel with debian with no modules. get slack, debian and windows all running on my machine the way they're intended?
View 5 Replies
View Related
Jun 17, 2009
I installed F11 x86 from the DVD onto one of my machines using a total of 4 partitions:
1. /boot
2. /
3. /home
4. swap
I then created an image of the first 3 partitions with fsarchiver and restored it onto a second machine (with different hardware). Grub was loaded onto the second machine as well without a problem. The new cloned install will get past grub fine but the kernel hangs. After removing 'rhgb quiet' from the boot options, I can see that the last message outputted to the console is something about the PS/2 mouse - this doesn't make sense as the mouse is working perfectly fine.
Additionally, I can still reboot using ctrl-alt-delete so the kernel/CPU must still be responsive. I have tried troubleshooting the various pieces of hardware, so I'm guessing it's something with the clone. All the cloned filesystems appear to be fully intact; the partition UUID's are all the same. I've even tried changing the UUID's both in grub and /etc/fstab to hardcoded /dev/sdaX , but this does not fix anything.
View 2 Replies
View Related
Nov 9, 2009
The boot process fails using; 2.6.30.9-96.fc11.x86_64. I am able to successfully boot by selecting 2.6.30.5-43.fc11.x86_64 from GRUB. The last few messages I receive when booting using 2.6.30.9-96.fc11.x86_64;
ADDRCONF (NETDEV_UP): eth0: link is not ready
Sky2 eth0 link is up at 100 mps, full duplex flow control rx
ADDRCONF (NETDEV_CHANGE):eth0: link becomes ready
audit (1257757711.701:20095): auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 op=remove role key=null list=2 res=0
audit (1257757711.701:20096): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:readahead_t:s0 res=1
View 1 Replies
View Related
Oct 14, 2010
I'm trying to upgrad from kernel 2.6.32.9 to 2.6.34.3 and I'm having problems.The boot finished with that old gem "Kernel panic - not syncing: Attempting to kill init !"I suspect that it's something to do with my PATA IDE driver because there have been kernel changes in this area.My problem is all the boot messages scroll off the top of the screen before I can read them and it's no use saying look at dmesg or /var/log/messages because the root fs isn't there - another reason why I think it's to do with the drivers.So my question is, is there some way I can slow down the boot process so that I have a chance of reading the messages ?
View 4 Replies
View Related
May 27, 2010
Slack is 32bit. Frequently, firefox becomes unresponsive. I can close the window, but the process is not terminated. I am not able to restart firefox without rebooting.
When this problems occurs the firefox processes are not terminated by the 'kill' command. Example
Code:
tim@bart:/home/http/run/baker/cron$ ps aux | grep firefox
tim 3780 0.0 0.0 3356 1640 ? S 15:59 0:00 /bin/sh /usr/bin/firefox
tim 3792 0.0 0.0 3404 1696 ? S 15:59 0:00 /bin/sh /usr/lib/firefox-3.5.2/run-mozilla.sh /usr/lib/firefox-3.5.2/firefox-bin
tim 3796 0.3 3.2 316560 95712 ? Sl 15:59 0:21 /usr/lib/firefox-3.5.2/firefox-bin
[Code]....
View 9 Replies
View Related
May 1, 2010
When I boot into kernels bigger than 2.6.30 the boot-process stops. I use the PUEL-version of VirtualBox:
$ apt-cache policy virtualbox-3.1
virtualbox-3.1:
Installed: 3.1.4-57640_Debian_lenny
I am searching for iso's for Vbox which come with the guest-additions. They gotta be Debian-based (somehow). My goal is to have got a correct resolution. I tried to create one with live-helper, but that did fail. The purpose of the iso is troubleshooting (rsync, repairing grub, stuff like that).
View 14 Replies
View Related
Jul 19, 2010
For a diskfull node (the OS installed in a disk), I can use the 'insmod' command to insert a kernel module into the kernel. And after the reboot, the module is still in the kernel. I have a question here: how, when and which kernel module will be loaded in the boot up process for a diskfull node?And for the diskless node, can I use the chroot or some other ways to install the kernel modules into ramdisk, so that kernel module can work when the diskless node boot up? I think it needs certain mechanism to load the kernel like the boot up of diskfull node.
View 8 Replies
View Related
Feb 22, 2011
I got home today to find that my KDE login screen would not let me log in. It said the authentication process failed or something and I needed to terminate the screen lock process manually. So I go over to another virtual terminal and try to log in. As soon as I enter my user name, a bunch of errors come up and I am unable to log in. "This can't be good" I think to myself, and reboot.
I am greeted by this error upon booting:
The error says that it says it cannot find /sbin/init. I loaded up a Ubuntu live CD and verified that /sbin/init is indeed present and all my other files still seem to be there. I tried booting into arch fallback on grub but that didn't work either. Midway through the day I SSHed my desktop from my phone and started it doing an upgrade. I was able to login.
View 1 Replies
View Related
Mar 24, 2010
I'm not sure what caused it, but it happened right after running 'yum update'. It may be because it installed a new kernel, and there are now two kernels listed in my grub.conf and at boot; 2.6.31 and 2.6.32. System boots through a list of things it's starting up and stalls out at ATL or ADL or ADM maybe. It hangs there for a minute or so then flickers. This happens every time at boot. It's a bit difficult to post more information since I can't get past that part of the boot process, and I can't seem to be able to skip it either. It may be worth mentioning that this is a mini-itx motherboard. Intel Atom 330 1.6, 2GB DDR2, onboard GeForce 9400m. It's a zotac ionitx-a-u. I've installed a fresh copy of Fedora 12 lxde.
View 3 Replies
View Related
Jan 20, 2010
I have one machine where I have several versions installed on different partitions. The base partition (/dev/hda1) is Slack 12.1. On a spare partition (/dev/hdc4) I had installed Slackware64-current. Last week I slackpkg upgraded and installed the 2.6.32.2 kernel, and now that partition will not boot. I know that with the new kernels the hd* designation has been removed, and have already redone that fstab (accessing it from a different boot) to reflect the sd*. Here is the slack64 section of my lilo.conf:
Code:
# Linux bootable partition config begins
image = /other/spare4/boot/vmlinuz
[code]....
View 4 Replies
View Related
Jan 5, 2010
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies
View Related
Mar 14, 2011
Any idea if there is a kernel 2.6.37 stable, for Squeeze? Packaged one preferably , if an address is given for download, if there is one.
View 6 Replies
View Related
Mar 19, 2011
I used to install the latest kernel for opensuse 11.3 from this repo:
Index of /repositories/Kernel:/stable
but for 11.4 it is empty. I can see that for 11.3 the 2.6.38 kernel is already built.For 11.4 there is only the Kernel:/HEAD repo. Are we going to have a kernel:/stable repo for 11.4?
View 7 Replies
View Related
May 2, 2011
I installed Slackware 13.37 today, fresh install. I added the generic 2.6.37.6 kernel to lilo, rebooted, and ran with it. I transferred some stuff to my hard drive and installed a few things, reboot again and now I can't boot up with my kernel of choice (but I can with the huge kernel). It stops during the boot process and says
Code:
[1.785238] No filesystem could mount root, tried: romfs
[1.785342] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(8,1)
[1.785417] Pid: 1, comm: swapper Not tainted 2.6.37.6 #2
After that is a line that says Call Trace and several lines after that with stuff that makes no sense to me and that I don't feel like typing out, but will if it is relevant.
View 5 Replies
View Related
Aug 15, 2010
I'm trying ti boot an xubuntu lice cd 6.06 on a new computer , Intel DG43NB board. I have tried several options at boot with the f6 key and have had no luck at all.It goes to the OK booting the kernel screen and locks up there.
View 1 Replies
View Related
Feb 10, 2010
kernel with which most version number may be compiled in Debian 5 stable without updating to testing? 2.6.32.8 can't compile, if not turn off virtualization, since Documentation/least/least.c
contains
#include <sys/eventfd.h>
which is present in libc6-dev from testing, but is absent in stable.To drivers compiling kernel used own linux/eventfd.h.
View 6 Replies
View Related
Aug 26, 2009
Which is the current stable version of kernel in fedora 10 and how can I installed because right now I have unstable kernel:
uname -a
Linux blind 2.6.29.3-60.fc10.x86_64 #1 SMP Sat May 9 04:18:14 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
I just want to get back to latest stable kernel of fedora 10. I'm not able from the grub to choose an older because there are only kernels for fedora 9. The problem was that previously I used fedora 9 however I upgrade it but it was still with kernel of fedora 9 so I pick it the unstable of fedora 10 and I installed it. Right now I just want to get back to current version of kernel in fedora 10 so I can upgrade it to fedora 11.
View 5 Replies
View Related
Jun 22, 2011
Fresh and Full install: Slackware 13.37 64-bit x86_64. What is the correct procedure to switch from huge kernel to 2.6.38.4 kernel?
View 6 Replies
View Related
May 19, 2011
can't use catalyst driver, virtualbox refuse to run, selinux problems,I want to know if its possible to install only this new kernel 2.6.38 without "contaminating" the rest of my installation with unstable packages?
View 2 Replies
View Related
Jul 7, 2010
Since all what I can find on google is about benchmarks I'd like to ask you if a 64 bit kernel would be more stable , secure and reliable than a 32 bit one.
I ask this question because apparently the 64 bit instruction set offers more advanced security features (i'm saying apparently because I'm not able to give details since it been a really fast read) which would be used by a 64 bit Operating System (Apple also stated that 64 bit applications are less likely to be "attacked").
I have to assume that a 32 bit one does not use them right? Should I stick to 64 bit? (to be honest that "not for everyday" thing on ubuntu download pages made me wonder lol, because since intrepid i ALWAYS used the 64 bit version)
My "lowest" computer has a pentium processor (1,6 ghz dual core) according to lshw I have NX enabled and my ram is 2GB (might seem useless using a 64bit kernel on 2 GB but i'm more concerned about security now)
View 9 Replies
View Related
Oct 28, 2010
Can someone tell me which is the latest stable kernel version available in the repositories?? Is it 2..6.35-22 ??? if so, when will 2.6.36 be available??
View 4 Replies
View Related
Jan 21, 2010
I just ran "yum update" to download the latest kernel from the repository, and noticed that it's 2.6.18-164.11.1 while the latest on www.kernel.org is 2.6.32.4.Out of curiosity, why is there such a discripency between the two? Lack of resources to test and build binaries?
View 5 Replies
View Related
Dec 27, 2010
how can i make 1000fps stable kernel
View 2 Replies
View Related
Mar 15, 2010
I've just seen a strange set of error code during my boot sequence:
WARNING: at mm/page_alloc.c:1813 __alloc_pages_nodemask+0x5ce/0x6c0()
Hardware name: MS-7250
Modules linked in: lp fuse nvidia(P) joydev snd_cmipci gameport rtc_cmos rtc_core thermal processor snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore thermal_sys i2c_nforce2 rtc_lib button agpgart k8temp hwmon psmouse sg i2c_core ppdev parport_pc parport forcedeth serio_raw evdev
Pid: 1543, comm: mount Tainted: P 2.6.33 #2
Call Trace: .....
The machine appears to run normally otherwise.
View 4 Replies
View Related
May 13, 2011
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
View 1 Replies
View Related
Dec 31, 2008
I have the following strange thing with a RHEL4 installation. Since last week, the system did a reboot and now something is really fucked up. During boot we get the following messages (don't care about 'strange' typo's, my colleague typed it 'blind' from the screen)
Code:
The strange thing is that we never see a 'could not mount blabla' or similar messages. First we thought it was a failing kernel update by plesk, but even after manually updating the kernel with RHN RPM's, still the same message. Booting with rescue mode and then chroot the system works. After that we even can start things like plesk and so on.
We double checked things with another RHEL4 install, and at least two things were odd:
1: the working machine has /dev/dm-0 and /dev/dm-1, the broken one doesn't
2: some files on /dev didn't have group root, but 252
We tried to recreate the /dev/dm-X nodes with [vgmknodes -v], output:
Code:
A fdisk /dev/sda shows: /dev/sda2 XX XXX XXXXX Linux LVM (I removed the numbers because this line is from another machine, but rest was identical)
We have a copy of the boot partition so if one need more info please let me know.
grub.conf:
Code:
last part of init extracted from initrd-2.6.9-78.0.8.ELsmp.img:
Code:
View 3 Replies
View Related
Feb 11, 2010
I use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
View 11 Replies
View Related
Nov 6, 2009
I compiled my kernel, compiled scsi support into kernel, used the new kernel and initrd, the boot failed.Then ,i unzip my initrd, found that sd_mod.ko can't be insert, i added it manual, and reboot OK.so, why! in the kernel configure , the sd_mod.ko is set to <M> , but why it can't be found in initrd?
View 1 Replies
View Related