I have downloaded the rpmpackage SpiderOak-9680-1.fc10.i386.rpmBut when I installed the package and run the client I don't get any category-maps in the backup tab "Basic mode" .So my question is, are the rpm package "SpiderOak-9680-1.fc10.i386.rpm" compatible with F13 ?The rpmpackage is made for F10 but is there any differences in the package-structure so it will not work fully in F13 ?
View 3 RepliesI've evaluated about 15 offline storage systems this week, and one of the best was spideroak, but there's a huge issue in their shared folder structure and procedure.When you make part of your data shareable you MUST share a folder from your original disk. This is a real pain. You cannot share specific files like you can on many others.To initiate sharing your establish your unique username for sharing (different preferably than your spideroak username) the share name, and the room key (password).While you might expect the share name to be part of the URL that guides you to the share which then accepts your password for access, thats not how it works. Instead spideroak gives you a URL that contains the PASSWORD and does not even mention the share name!!
Therefore anyone you give the URL to has direct access to the share you create (which is what you are trying to accomplish in general) but any browser THEY USE will remember the URL which contains the password, not the share name.THIS IS A HUGE SECURITY ISSUE since you have no control over how an authorized user is going to access your data and from where and most users are not sophisticated enough to guard against the default intrusion they are going to leave behind.
I just installed opensuse 11.3 freshly from opensuse-GNOME-livecd.I read about spideroak and trying to install it via zypper
View 3 Replies View RelatedWho am I meant to ask nicely to get such applications as Spideroak into the 11.4 repositories?
View 8 Replies View RelatedAfter upgrading KDE from 4.6.0 to 4.6.3 SpiderOak will fail to run with message. Cannot mix incompatible Qt library (version 0x40703) with this library (version 0x40701). There's no more SO package in Non-OSS, apparently due to some support issues. That's a pity, since Dropbox had conceded access to US agencies, IMO SpiderOak is a really good option, and has been working very nicely until now. Anyway, Yast tells me that KDE 4.6.0 uses Qt 4.7.1, while 4.6.3 brings in Qt 4.7.3. A possible solution may be found here, originally for Qt 4.7.2. I'll try it and report.
View 5 Replies View RelatedI have a cron job to start spideroak when the server boots code...
Command line arguments not allowed during New User Setup
Interestingly enough.... the line saying "Command line arguments not allowed during new user setup" isn't from my script. Any chance that has something to do with it?
I just wanted to upgrade to fedora 11 from the current version 5 with the of a live cd.I dont want to loose the previous configuration files. upgrade everything except the / directory. How do you do that? I also have a retarded WINXP partition on the same drive which I dont wanna loose.
View 9 Replies View RelatedIs it possible to import an xorg.conf file from Debian to Fedora and have it work? The reason for this is that I have an older monitor that only offers 800x600 as the maximum resolution.
View 2 Replies View Relatedinstall of Fedora, always used Debian or Ubuntu before now, and am looking for versions of localepurge, deborphan and debfoster - do they exist in the Fedora Software Repository?
View 10 Replies View RelatedI have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
View 4 Replies View RelatedI am newbie to linux, I am dealing with Fedora core 13. I have already succeedded in building an ad hoc network and a WLAN network. My next step is to get some networking statistics such delay, throughput, etc. So, I need traffic to flow through the network for both multimedia traffic and bulk data traffic. How to send files between nodes on the network (I found commands ftp, rcp but do not know whether they are the correct choice for this). ID their any application to perform this?
Also, I want to perform some video streaming between two nodes to study the behavior of real time data transfer. Is thier any application to perform this?
My laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
View 12 Replies View Relatedmy problem is inkscape-0.48.0-1.fc14.3.src.rpm in fedora 14 64 bittry rebuild --source inkscape-0.48.0-1.fc14.3.src.rpm and this my error:I think something wrong pkgconfig .
attributes.cpp:20:32: fatal error: glib.h: No such file or directory
compilation terminated.
arc-context.cpp:21:28: fatal error: gdk/gdkkeysyms.h: No such file or directory
[code]....
This post is for an HP parallel printer but I think it should work for at least "some" other parallel printers.I am sure that someone smarter than me will follow up this post with a "well, just do this and that" and you will have your HP Laserjet 6P printer ready to go, but since questions litter the forums of MANY distros on how to get "at least" an HP parallel printer to work, I'll post this anyway.This may or may not work for you if you do not have an HP but you can try it.The install printer box will let you do an install for an HP Parallel and it asks for how it is to talk to it, through CUPS sock or "local host'. When we get through what I recommend you should chose "local host".
View 2 Replies View RelatedI am using F10 desktop edition, all the computers using windows are able to access the shared folders over lan except me using F10. I have tried many things with smb but still unable to connect.I am new to linux so i dont khow much of its technicalities.kindly suggest how can i be able to access the shared documents ..
View 1 Replies View RelatedI'm setting up my first Linux install and I was wondering if I would be able to boot Fedora from a CD while keeping every other file on my computer, or in other words if I would be able to put the /boot partition onto a cd. I've also read that Linux can be booted entirely from a logical partition. If that's true then can anyone help me in setting that up. Mostly my problem is I already have four primary partitions, one being a logical drive with plenty of free space in it, and I can't get rid of the primary partitions I already have.
View 1 Replies View RelatedHow to make internet sharing in Fedora with two inputs & one output.
View 14 Replies View RelatedHow can I access shared Windows files from a fedora system
View 3 Replies View Relatedok so the router works in windows and i know the config details of it.i can see other wifi access points in the area but not my one. i have tried joining it as a "hidden network" to no avail.is there any reason why fedora would not detect my own wifi when it detects substantially weaker signals instead??
View 2 Replies View RelatedIf any of you have successfully created a video hosting server with Fedora, can you give me any ideas of what software to get and how to configure it and so on? Or, if you have been unsuccessful, can you tell me what doen't work?
View 1 Replies View RelatedLinux OS : Fedora 10 (No graphical mode)Windows OS : XP and Windows Server NT...I am able to access from my windows to linux using following step//fedora10 ip username of admin and password...I am able to view the admin and shared printer of fedora 10.When i try to enter in the admin folder i am not able to access it. It is giving error "Access is denied".
View 6 Replies View Relatedi am justin i'm 17 years old and new with linux, i use ubuntu and linux mint 7 and a friends of my has a dedicated fedora server. he asked me to intall a desktop manager ( or something that is the same, dont know how to call it ) so he could use remote desktop to acces his server
i have connected the server trought ssh and i am in the terminal. Now i want to install kde or gnome so i and my friend could use the server as a mail en WWW bla bla bla server. and my question is how i need to do that i tryd : yum groupinstall "KDE (K Desktop Environment)" and yum groupinstall "X Window System" but none works i have seen those commands on this forum so i tryd it.
I have a Western Digital Pasport 320 GB hard drive. I wanted to create a live installation on it like a USB stick. I wanted it to serve as a portable OS that I could use to boot any other computer off of, and use it for diagnostics and anti-virus scanning on Windows based computers. The additional space is for my own personal use, kind of like having a mobile desktop where I have all of my documents in one place.What I need to know is how to set up Fedora 11 so that the hard drive will boot on most PCs regardless of their architecture. I also need to know what's a good Anti-virus to install onto it for the sake of fixing Windows hard drives.
Please keep in mind I'm a noob when it comes down to a lot of things, so if there's an antivirus I have to install manually, please included a step by step.
I have Fedora 8 and we just switched over from a Windows "File Server" to Windows Server 2008 (10.1.1.17). I updated my fstab file and now when I go onto the Windows folders, I can list and read files, even save them, but new files are always read only.
fstab file (some, without the asterisks):
//10.1.1.17/USERS/Jeff/fs /home/mriuser/Desktop/fs cifs rw,username=jsadino,password=**** 0 0
I've tried ntfs-3g, auto, ntfs, smb, some umask combinations, changing ownerships, changing permissions, everything I could think of, but still can't modify new files.
[root@localhost tmp10]# mkdir tmp2
[root@localhost tmp10]# cd tmp2
[root@localhost tmp2]# touch tmp
[root@localhost tmp2]# ls -l
[Code]...
It's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?
I dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies View RelatedRecently installed F12 through the text based install and have got to GNOME gui but when i got to system/administration i only get two options and those are for display changes. Is there some way to install the features i missed out on? namely Add/remove programs which i can't seem to find anywhere
View 3 Replies View Relatedi want to compile Moxa (5100) driver in Fedora 12 , kernel <= 2.6.30 but now when i run command i see this error :
Code:
ln: creating symbolic link `libssl.so': File exists
make -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build SUBDIRS=/home/AAA/moxa modules
make[1]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
CC [M] /home/AAA/moxa/npreal2.o
/home/AAA/moxa/npreal2.c: In function �npreal_open�:
/home/AAA/moxa/npreal2.c:1000: error: implicit declaration of function �task_session_nr
make[2]: *** [/home/AAA/moxa/npreal2.o] Error 1
[Code]...
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies View RelatedI am noticing problems accessing the firewall gui and mounting the second hard drive in my PC running Fedora 13. This is only when I am accessing the machine with VNC. If I am sitting in front of the physical machine, I have no problems at all. I would like VNC to behave more like I am sitting in front of the computer. Is there a way to do this? Thank you in advance for your feedback.
View 4 Replies View Related