Ubuntu Installation :: Restore My System Via Clonezilla Due To Hdd Failure?
Mar 23, 2011
I recently had to restore my system via clonezilla due to hdd failure. I frequently back up my /etc/apt folder as well as some other configuration files and settings that I use in my system to bring my restored image up to date with my ever changing preferences, etc.
I noticed the problem when I replaced the etc/apt folder with my backup version. After replacing the folder, I ran 'sudo apt-get update' and imported a list of all my previously installed software. Then I ran 'sudo apt-get upgrade'. I didn't get any errors at all during any part of the update and upgrade process.Then this popped up in my panel, and won't seem to go away.
View 5 Replies
ADVERTISEMENT
Mar 10, 2011
I just backed up a complete copy of my C drive which has been partitioned 3 ways to have both windows and Linux mint on it with the loader which comes up when the computer is turned on. My question is that recently I used Norton ghost to backup my system and it failed to reinstall the grub. Will clonezilla reinstall the boot loader on my drive if I make a complete restore of the entire C drive. Is there any thing else I should be concerned about upon restore which I should take into account? I'm fine now but am asking concerning the future possibility of a restore.
View 5 Replies
View Related
Mar 14, 2011
restore of Win XP partition - he wants to be able to "press the button" and restore the whole partition with XP using Clonezilla. Is it possible - to do this restore without Clonezilla CD? And he's planning to have 3 partitions on his HDD:Windows XP system partition partition for backing up system partition partition for personal data
View 1 Replies
View Related
Sep 29, 2010
I'm having a problem figuring out how to clone and restore partitions from images on a test host, ie. I have different Linux and Windows images in sda2 that I need to restore on sda1 to run tests.
Here's a typical scenario:
1. On a brand new hard-disk, create two partitions, one to hold the OS to run tests, and a second to hold Clonezilla images
2. Install XP in sda1
3. Boot with Clonezilla Live, and save sda1 into an image in sda2
4. Install Linux: It installs GRUB as boot loader in the MBR
5. Save Linux into an image in sda2
6. Restore XP: By default, Clonezilla doesn't restore XP's boot loader, and leaves GRUB to boot XP :-/
How can I force Clonezilla to restore the boot loader in the MBR (while leaving the partition table as-is), so that Linux=GRUB and Windows=NTLDR always?
View 3 Replies
View Related
Apr 23, 2011
I used Clonezilla an older version not the latest to backup an entire NTFS Windows XP drive to DVD last year. I have a series of three (3) of these DVD's but now cannot restore the backup image back to the same PC. The problem is that when booting with Clonezilla I don't have an option to restore from a CD or DVD drive since the computer comes with two working CD/DVD drives that are detected by the BIOS when the POST is displayed. I used one of these drives to boot with Clonezilla and the other one containing the backup image Disk 1 of Disk 3. Clonezilla only detects the two hard drives and a USB drive which is removable. Is there a bug in the restore process because it allowed me to backup the entire image of the hard drive onto a DVD last year but this time around there are no CD or DVD drive options available to choose other then the CD drive Clonezilla was used to boot up.
View 8 Replies
View Related
Jun 21, 2011
I have an Ubuntu server and i've installed drbl-clonezilla to clone and restore pc, I have a 40 gigabyte image to be deployed on other pc's with larger hard drive ex. 160 GB or 240giga, my problem is that when I deploy the image on a larger disk I end up with a disk with a partition of 40 GB and the rest unallocated, how can i restore the the disk and use full disk space, the goal is to automate the process. In clonezilla-drbl there is the possibility to start a "prerun" and "postrun" fonction that could help complete the deployment process.
View 2 Replies
View Related
May 2, 2011
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
[Code]....
View 7 Replies
View Related
May 7, 2011
are there any sweeper / cleaner apps which can take back my installation as to when it was new. I know home directory could have config files etc..but that doesnt matter, i want all packages and applications reset to how it was when i had a clean install. I am using Natty
View 2 Replies
View Related
Feb 5, 2010
I finally understand why I couldn't get Clonezilla to work on my system. But, I am more baffled than ever.
You see, my system has been in great working order for months. I am running 9.10 32-bit and I keep everything maintained on a daily basis. I just updated to kernel 2.6.32-19 and, like I say, everything is working pretty much perfectly. But, yesterday, I volunteered to help with some official Canonical Ubuntu testing. This morning, I got an email from them that they want me to do the work and giving me instructions on how to proceed. The first thing to do is free up some disk space in order to have a special partition on which to install their testing kernels.
So, I downloaded their suggested tool for doing this, gparted. And, when I ran gparted, the first thing I discovered is that my disk drive has absolutely nothing on it! No partitions, at all. It only sees an empty device, /dev/sda. This is exactly what Clonezilla told me a couple of months ago - no partitions could be located to be backed up.
However, I and Ubuntu think I do have partitions:
Code:
$ df -Th
Filesystem Type Size Used Avail Use% Mounted on
/dev/sda5 ext3 19G 1.5G 16G 9% /
udev tmpfs 502M 360K 501M 1% /dev
none tmpfs 502M 204K 501M 1% /dev/shm
none tmpfs 502M 328K 501M 1% /var/run
[Code]...
View 9 Replies
View Related
Sep 1, 2011
before i go and get rid of wubi for the real deal, i would like to know if i can get rid of ubuntu by doing a system restore. i never mind doing system restores and i have my recovery disks if needed.
View 5 Replies
View Related
Oct 3, 2010
OK, so about a week ago or so my Ubuntu 10.04 install no longer recognizes my iPod Touch or Iphone. I have had no luck getting them to work. i REALLY do not want to fresh install Ubuntu. Is there a way I can like repair or restore (a la "Window$") that will fix the OS itself without removing any programs or settings?
View 9 Replies
View Related
Dec 31, 2009
In 2010 I want to build a new linux box. I currently have a dual-boot system...
IDE1 = WinXP 200GB Master
IDE1 = Opensuse 11.0 Slave 80GB
I have cloned both drives with CloneZilla (CZ) and restored with it aswell. My 80GB is a Western Digital Caviar Model (WD800BB-00JKC0). The drive I'm thinking of buying is a WD Caviar SE (WD800AAJB) [URL]. Will my restore images work with this drive? Its a 80GB but the model numbers differ. Does it make a difference?
View 2 Replies
View Related
Jul 11, 2010
I updated 9.10 and system crashed during update and is now unbootable. It seems to freeze (or is just taking a really long time) at fsck. Is there any way to make my computer usable again without reinstalling the whole OS?
View 5 Replies
View Related
Aug 14, 2010
I would like to find out how to back up a complete Ubuntu system, and then restore it on a clean harddisk.I have been running dual booting with Win XP until now. I am running Ubuntu 10.04, but have installed quite few add-on. I would like to make an Ubuntu-only machine now, with all the same apps still there, but dont want to go and download everything again. I am looking for a way I can back this entire Ubuntu installation up, and then restore it to a clean drive.
View 2 Replies
View Related
Sep 1, 2011
Ubuntu has been reporting a System error problem but when it try's send a report to your servers, it fails due to it's failure of identifying the packet id, i honestly have no idea of how to go about fixing this problem or even identifying the packet that's broken, please do help, as now my Apache server's not working properly, and a couple of other programs are getting affected by this, event installing and updating s an issue.
View 1 Replies
View Related
Feb 4, 2010
On my laptop I dual boot Ubuntu 8.04 and Windows XP. During the last upgrade of my Ubuntu distro something went wrong and now I get a messed up GUI. In the meanwhile I got a new laptop on which I only run Ubuntu 9.10. So my question is: I want to delete the linux partition on my old laptop and use only Windows XP but since I use grub to dual boot, I'm afraid that deleting the linux partition and extending the Windows partition will cause problems to boot my computer.
Here's a screenshot of my partitions:
View 2 Replies
View Related
Apr 3, 2010
I have a laptop with 250 GB SATA HD that has the following:
Win7 Pro installed first with sda1=system reserved partition, sda2=C: drive, sda5=separate software application programs to differentiate from Windows' Program Files. Ubuntu 9.10 was installed next (sda6=common swap partition for all Linux distros, sda7=Ubuntu root, sda8=Ubuntu home). Then Opensuse 11.2 was installed with sda12=root and sda13=home. Finally FedoraCore11 was installed with sda9=boot, sda10=root and sda11=home. Ubuntu and Suse have grub loader in their own root partitions.
Suse's grub menu controls all OS's. From this grub menu I can select Windows or any other Linuxes. Suse uses legacy grub because it was installed right after Ubuntu 9.10 which uses (legacy) grub.
Here is opensuse's grub menu:
# Modified by YaST2. Last modification on Wed Mar 31 11:49:28 EST 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 1
[Code]....
Somehow I also messed up Windows' boot file and boot partition table. Now I am still trying to use Windows installation CD to repair Windows but it has taken several hours and am still waiting for screen response. I cannot boot into any Linux distro either.
View 5 Replies
View Related
Jun 8, 2011
I have just foolishly used live media to install F14. Pre-upgrade of F13 to 14 repeatedly failed. Sadly I used the use all available space option rather than the free space. As a result I have a working FC14 system but no data from my F13 installation. Is there any way to restore my f13 system and/or data?
View 3 Replies
View Related
Oct 25, 2010
we have a Win NT4 system used for an important application used at two places. At one place it has gone bad. I want to create an image from good system and restore it at the second location. Is it possible to do this using "clonwzilla live cd"? Does it harm the good system? Can I save the created image to an USB drive?
View 3 Replies
View Related
Jan 5, 2011
Been running Fedora for a while now, iterating up through versions to 12. Decided to to a clean install upgrade to 14. Apparently, bug mistake. Everything seems to be progressing fine, but after 'transferring install image to harddrive', the 'Starting Install Process' fails withsystem-config-lvm-1.1.15-1.fc14.narach.rpm cannot be opened.I have no idea what to do with this. I've reburned the install disk a couple of times (and checked the HASH) -- no apparent problems with the install media.Tech details: x86_64 install on a multi-pro box with a 3ware raid 5 controller (5 disk). I've never run LVMs. Two simple hard partitions (/ and /home). Fedora 12 installed with no problems (as did every other version of Fedora <=12).---------- Post added at 12:29 PM ---------- Previous post was at 11:54 AM ----------Some additional information:1 tried Fedora 13 -- wouldn't even recognize my disks. Installer hung at trying to find basic storage. Not a good sign2 tried my old Fedora 12 install DVD -- again, worked like a charm. Expect that F12 repos are now closed.
So, it seems as if some 'change' between F12 and F13/14 has made some part of the install process choke on my 'hardware' (I'm guessing something related to 3ware RAID card). ---------- Post added at 01:51 PM ---------- Previous post was at 12:29 PM ----------I just tried CentOS 5.5 (x86_64). Also installed fine. For some reason, Fedora >= 13 absolutely won't let me get past the problem noted in the OP. I suppose I could go with CentOS (for long EOL support), but I need some of the newer compiler/dev libs in Fedora 14 for some projects I'm working on.
View 5 Replies
View Related
May 12, 2010
This question has been raised several times I am sure but...
I would like to create a FULL recovery CD/DVD of my system with a boot restore...
Any recommended for Ubuntu 10LTE Server.
View 2 Replies
View Related
Jan 31, 2009
probably did something stupid.. just haven't figured out what yet.. hope someone can point me in the right direction. daughters computer broke, maybe virus, so i did clean reinstall of xp. decided to give her a couple of linux distros, thinking maybe they are safer for when she is surfing..
Used gparted to repartition hd:
Partition table entries are not in disk order
Installed Ubuntu 8.04. was then able to boot into either ubuntu or xp. next installed fedora 10. new menu.lst did not show ubuntu, only fedora and xp. had some lockups in fedora, and had to pull plug to reboot 2 or 3 times. replaced power supply. added ubuntu into menu.lst. boots into fedora and ubuntu fine. tried to boot xp, and get "Preparing System Recovery Option", then PC Angel appears, and it wants me to use the system restore option for xp.
Is there something i can do to recover xp without having to wipe the hd and reinstall xp, then reinstall ubuntu and fedora (and if i do all that, how can i be sure i don't end up with the same problem?
View 2 Replies
View Related
Feb 1, 2010
My Mini13 came with hardy preloaded, and it's got pretty messed up since, so I'd like to restore factory OS via a grub entry that looks like this:
title System Restore
root (hd0,2)
chainloader +1
boot
This points to a partition which, when mounted, has this stuff in it:
bootfs.img initrd0.img install.sh logo.png syslinux.cfg vmlinuz
boot.msg install.cfg ldlinux.sys rootfs.img vesamenu.c32
I'm not a computer, but that looks pretty good to me but when I select this grub option it just says:
Boot Error
Is there a log or something that might give me more info about the error?
View 5 Replies
View Related
Mar 10, 2010
I have an installation from USB/DVD issue.
Setup:
1. Desktop running WinXP
2. Lenovo S10e netbook running Win7RC1 (just expired.) no DVD drive.
3. 1 DVD by Novell and Lenovo with "SUSE Linux Enterprise Desktop 10 (For recovery select Restore System from the initial Menu.) November 2008"
4. 4GB USB drive. Laptop can boot from it.
Problem:
Need to install the system to the Laptop using the USB drive. Doesn't install.
What I did:
Mostly followed the guide at "Installation without CD - openSUSE.htm" my USB drive is G:
used the HP USB Disk storage format tool to make my USB bootable.
Copied all files from the dvd to the usb drive
Moved G: ooti386loader* to G:
Deleted E: isolinux.bin
Renamed E: isolinux.cfg to E: syslinux.cfg
Downloaded syslinux-3.85.zip from [kernel.org]
Extract syslinux-3.85.zip to c: syslinux
CD'ed to c: syslinuxwin32 directory in a cmd prompt
Ran syslinux -ma E: .....
Result:
Runs all the way through, gets to a windowed program called ">>> Linuxrc v3.0.20 (Kernel 2.6.22.5-31-default) <<<" Code: could not find the openSUSE Repository. Activating manual setup program
Main Menu: Settings, System Information, Kernel Modules (Hardware Drivers), Start installation or System, Verify Installation CD-ROM/DVD, Eject CD, Exit or Reboot, Power off Cant find anything on the usb drive (obviously?) so what do I do now?
This is where I'm at and quite stuck... not sure what other flags there are to use, what I have to move around or rename.
View 2 Replies
View Related
Jan 7, 2010
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
View 9 Replies
View Related
Nov 28, 2010
I want to ask you if i can backup with clonezilla only /home sda3 directory. And to backup sda1 and Linux Swap with another program as Acronis and then to restore the sda1 and Linux Swap With Acronis on a formated Hdd and restore then /home with Clonezilla. Is this capable?
View 7 Replies
View Related
Feb 19, 2010
I am trying to set up clonezilla on pxe so that it will start up and show the drones in the workplace a list of images, they choose the one named after the model of computer, and image it. Which means all clonezilla settings but image need to be set and it should automatically choose default settings at 1024x768 when grub pops up. I have looked for command-line options, scripts to run, etc... so far this is what I have...
Code:
#!/bin/bash
. /opt/drbl/sbin/drbl-conf-functions
. /opt/drbl/sbin/ocs-functions
. /etc/ocs/ocs-live.conf
ocs_live_run=`ocs-live-restore`
ocs_live_extra_param=`-p reboot -r hda`
ocs_live_keymap=`NONE`
ocs_live_batch="no"
ocs_lang="en_US.UTF-8"
ocs_daemonon=`samba`
I don't need the bash for selecting the image, but you might as well add that seeing as there's almost no info online for people who want a pxe server...
View 2 Replies
View Related
Apr 1, 2011
I'm trying to "upgrade" from ubuntu 9.04 to ubuntu 10.04.2 via a clonezilla (using a maverick usb clonezilla software with it's vmlinuz and initrd.img). but this clonezilla is not from a bootable usb flash drive, usb drive or CD, it's from the hard drive.
Here's what I have:
1) one 500gig drive with a primary partition under LVM. this partition has a 490gig root partition (ubuntu-root) and a 10 gig swap partition (ubuntu-swap_1). It has an extended partition (/dev/sda2) that's not under LVM consisting of one logical drive (/dev/sda5) that is the /boot partition.
2) I've upgraded the grub to grub2 (version 1.96) which has better features.
3) I've deleted the swap and reconfigured this partition with a name of (livehd) and it has an ext3 filesystem. I've copied the clonezilla software to this partition which also has the ubuntu 10.04.2 image that I want to restore to the root partition.
4) I've modified the existing grub2 using the 40-custom file so that the grub menu has the "Clonezilla Ubuntu 10.04.2 upgrade" entry in it.
5) the initrd.img from clonezilla has LVM support since I opened up the image to a directory using "gzip -d -c /boot/initrd.img|cpio -i" to check it.
6) grub2 sees the (ubuntu-root), (ubuntu-livehd), (hd0,1), (hd0), and (hd0,5) devices and can list (ls) their directories
[Code]...
View 9 Replies
View Related
Apr 20, 2010
I'm having some trouble removing unr from my asus eee pc 1005peb, I installed it about a month ago and sadly to say I need cash so I will be selling the eee pc. I want to restore it to factory settings. I already tried uninstalling unr, by deleting the partition it was on, that didn't work. Once I booted up again it gave me a grub error. So I reinstalled unr and now have a left over swap partition from the original install. I want the system to boot up as it did before the installation of unr. How would I go about doing this?
View 1 Replies
View Related
Jan 19, 2011
I have (had) Debian Testing running on a 250GB IDE hard drive, partitioned normally.
I also have 4x 1TB drives in a raid 5 using mdadm, and 2x 500GB drives in a raid 1 also with mdadm.
I put the two arrays in lvm using:
I then used "lvcreate" to make storage/backup 300GB, and the rest went to storage/media (approx. 2TB usable). I put an xfs filesystem on both and mounted them.
All was working fine until the system drive shorted out and died on me this morning. As far as I can tell, all my other drives and everything else is fine. I do a daily rsnapshot of the filesystem, which of course is residing on storage/backup (stupid, I know). So I have full backups of everything, but I'll have to put a new hard drive in and reinstall Debian before I can restore everything.
I've reinstalled before and simply reassembled mdadm arrays and remounted them before with no problems, but this is the first time I've used lvm, so I'm not sure what I have to do to restore everything. Is it as simple as reinstalling the system then doing a:
View 4 Replies
View Related
