Is it possible to backup and restore the system files of fedora 10_x86_64 so that if there will be any problem at OS , I can easily recover it from the previous backup files?
View 1 Replies
I install and tested Restore EE Backup server on a test PC with basic configuration and its working fine.
[URL]
The issue i have is where is the location these backup snapshots or files are saving? I want to add a separate Storage to save the backup?
This is a good way to backup my current system:
How to backup your system to restore your server incase the hard disk is damaged.
I am trying to restore my system to Ubuntu 10.10, using a system backup made with REMASTERSYS. When I reboot, I get the message: GRUB error:15 I found many threads discussing this issue, most notably here: [URL]
[Code]....
Recently I've backupped my entire /home folder on my laptop with grsynch trough ssh.Since I already had a simply text file containing all installed programs, I figured 'then, when i go from the backup trough my desktop, all my program settings will be restored if i run the txt file to install all those programs first.So i installed al programs, then i went from backup to /home on desktop, logged out and back in. Started up a random program (tried thunderbird and filezilla) and no settings were to be found.In retrospect, docky did start, but didnt have all the launchers i had on my laptop. so that could have been a clue.
View 4 Replies View RelatedO/S: Fedora 12
I am newbie in linux. What I want to do is: Make backup for my file system, cos I learn how to configure servers. So if I made some thing wrong, I want to be able to restore the default setting for my files. Instated of install new O/S.
best/simplest way to back up my triple-boot machine, which has Karmic 32-bit, Karmic 64-bit and Windows 7 (64-bit) installed on 3 equal slices of the internal 1TB disk. There are a total of 6 partitions (1 primary+1 logical partition each for the two Karmic, and 2 primary partitions for Win7), and I would like to back it up on an external disk such that the whole system can be restored as-is by writing over the disk. I guess this means correctly backing up data+partition table+MBR, and I would also prefer backing up only the used portion of the disk (rather than creating a 1TB mostly empty image file).
To my knowledge the only way to reliably do this is with "dd" command, but I have never used it ("fsarchiver" seems to be the next best option, but it cannot back up MBR yet; and "partimage" does not have ext4 support). As described here and here, I should run the following commands from a live boot:
1) To back up entire data in compressed format (using 1MB read block to speed up the process):
dd if=/dev/sda bs=1MB | gzip > /backup/image.gz
2) To back up MBR+partition table (stored within the first 512 bytes of the disk):
dd if=/dev/sda bs=512 count=1 of=/backup/image.mbr
3) To restore data:
gzip -dc /backup/image.gz | dd of=/dev/sda
4) To restore MBR+partition table:
dd if=/backup/image.mbr of=/dev/sda
I would like to find out how to back up a complete Ubuntu system, and then restore it on a clean harddisk.I have been running dual booting with Win XP until now. I am running Ubuntu 10.04, but have installed quite few add-on. I would like to make an Ubuntu-only machine now, with all the same apps still there, but dont want to go and download everything again. I am looking for a way I can back this entire Ubuntu installation up, and then restore it to a clean drive.
View 2 Replies View RelatedMy manager at work asked me to setup an FTP server running LINUX. i had a post about some custom scripts and commands that i needed, so after i configured and set everything up, i got another assignment....here we go, i need to come up with a way of backing up the entire system, or creating a script that will setup,install and configure the FTP related features i have made working there.i am wondering what would be the most ideal/best and easy to do way to back up the system? the goal is : in case if HDD fails,r anything goes wrong.system can be restored in no time. this is still up in air thing, i offered taking some time on a weekend and setting up same system on say,ew drive, and swapping them when one goes bad... but what would be an alternatives
View 2 Replies View RelatedI wanted to know if there is variant of RollbackRX (www.rollbackrx.com.au) freeware or payable. RollbackRX used to Backup/Restore whole system changes in less than 1 minute before OS boot. And it does not consume a lot of free space.
View 9 Replies View RelatedI've recently started using Ubuntu as my main desktop operating system and I'm looking for a backup solution that is able to backup not only my documents and various other files that I have on the system, but I also need it to backup and create restore images for the operating system.
View 3 Replies View RelatedI've discovered that after restoring my site's backup this has happened to me again. How to delete the hacked /home/crocbits directory so that I can restore the backup under the same username. When I try to delete /home/crocbits I get this message when logged in as root:
[Code]...
I am thinking about upgrading to 64bit Ubuntu 10.10 because I have heard it's good for gaming and makes things run smoother. Also, I know it's the new thing and I'm going to have to switch eventually. Point is I don't want to loose my data with the clean install and I was wondering if I backup my current system, which is 32bit (assuming there is a backup utility, I thought I saw one) will I be able to load that on my new 64bit install?
View 8 Replies View RelatedImage Hard drive Ubuntu Operating system 9.10 Complete back up and restore. Changing over Hard Drives need a complete back up not just save files. So the image can be restored on any hard drive that restores the computer to its original state before it was imaged.
View 14 Replies View RelatedI would like to create a bash menu script for my home server For instance if i were to type ./script It would then bring up 3 options
a. Create a backup
b. Restore files from a backup
c. Quit
If you were to select a or b it should then ask you were you want to backup or restore from. And if i were to type in an incorrect letter i should get an error and take me back to menu. I have attepmted this a view time now and have magaged to get the menu up using parameters
One Laptop. One hard drive. Two OS's. Windows 7 is shot to hell from installing and uninstalling to much crap. Windows & WILL rewrite my MBR. How do I back up my far superior GRUB MBR and restore it over the wincrap MBR once I am done reinstalling Windoze?
View 6 Replies View RelatedMy laptop is Windows XP Fedora 11 dual boot. I am replacing it because of a defect. The original laptop is fairly new so I could simply start from scratch and setup everything again. But I was thinking there might be a way to do an image backup and restore. My new laptop will be identical to the old one
View 1 Replies View RelatedI have fedora 12 (amd64) on desktop. I was wondering if there a way to backup and restore all my downloaded updates since installation?! In the same manner that debian has aptoncd. I am planning to migrate on all data to a new partition with clean install and then just move the updates there.
View 6 Replies View RelatedI am now preparing myself to upgrade lenny to squeeze and decided to do a backup on my system. I used backup-manager to do the job and it worked fine. how do you restore said backup data?
View 4 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.
View 14 Replies View RelatedI would like to try the rawhide updates. If messed up my PC's couple of times so now before I do anything I would like to roll back changes and resort to last working kernel ( and related s/w) in case that fails . HOW do I do it? ( c.f Windows Last good session ) ALTERNATIVELY folks - is there a way you can backup and restore to full accuracy all your previous kernels .- I mean just inset the CD .It will identify the partitions , then it will ask you "where you want to restore them" and then it just restores the prev. image.
View 3 Replies View RelatedSomething went wrong with my video driver to the point that the X will not load any more. I am using my live CD. Is there a way to back up all my prefs and software installs, so I do not have to reset it all up after re-installing.
View 3 Replies View Relatedi am using ubuntu before, i dont have problem to backup my updates or my repository by using APTONCD, i switched now to fedora to give it a try. so far its good, my question now is how can i backup my repo, or any similar software like APTONCD.
View 3 Replies View RelatedThere were some files residing on my ext3 file system, using Ubuntu as my linux distribution. Yesterday I formatted the hard drive using a windows install CD, rewriting it with a new NTFS partition. I'm willing to restore my personal files deleted due to this format.
View 3 Replies View RelatedI'm trying to create backup/archive my Ubuntu 10.04 system files (so I can restore it in case my system get corrupted). More specifically, I'm trying to zip the important files in my root directory not including my home directory (which includes my documents which I backup separately/more frequently) to an external hard drive attached via USB (called 'My Book').
Since File Roller didn't give me quite the level of control I was looking for, I created a script that I could execute to backup and archive regularly. Here's a snippet:
cd /media/"My Book"/"Linux Backups"
NOW=$(date +"%b-%d-%y")
LOGFILE=Backup_Root_FileSystem-$NOW.log
sudo zip -r -T -v Backup_Root_FileSystem-$NOW / -x /media/'My Book'* /media* /proc* /sys* /mnt* /dev* /cdrom* /home* /'lost+found'* | tee -a $LOGFILE
[Code]...
How I can backup all my system & files to external hard drive?
I am using OpenSuse 11.3 32bit - Gnome
I am researching how to make an effective backup on Ubuntu Server. This server will have Vsftp, VPN, Samba stuff , many other added packages +many printers, many users + data. I know I can use tar for the data /u no problem. 1. I was testing tar on the /home directory on a few user directories. I then created a new directory and did a restore of the users directories on it. I noticed the /home/user owner and group were root. The files in each directory remained the same. This gave me concern. If I had a crash and had to restore these to a new HD. I would have to change these, what else would I need to change? 2. Since I have many config files, how do I back up them? I know I can do a dump, but then users shouldn't be on the system. The system files will change as they add users, printers, etc, and asking users to not work, is not really an option while dump is running. I thought I could do a tar on whole system. (cron late at night .. not as many users) Then in event of crash of HD.
1. Boot from live cd
2. format the new drive
3. tar back in the whole system
Will this work right? Is there something I am missing?
are there any sweeper / cleaner apps which can take back my installation as to when it was new. I know home directory could have config files etc..but that doesnt matter, i want all packages and applications reset to how it was when i had a clean install. I am using Natty
View 2 Replies View RelatedI have accidentally removed my /boot partition(when installing grub using LiveCD i'm typing "rm -rf /boot" instead of "rm -rf boot") After that i have installed grub, have to reinstalled latest kernel(2.6.29.6-217.2.3.fc11.i686) using rpm(and 2nd time using yum) but result the same: i can't boot into my system. Unfortunately, i can't copy&paste log, but booting stopped after something like a:
mounting /proc
mounting /sysfs
Creating /dev
then kernel finds keyboard and mouse and... and nothing. Is it possible to restore my system without reinstalling distro?
