i have newly bought windows7 installed hp laptop. how to install fedora in it? currntly it has 4 partitions,
1.recovery
2.c:
3.hp tools
4.system
there are plenty of spaces free in c:. but not able to shrink through windows disk management. how to install linux in it?
when i install fedora 11 after windows 7 ,i can not partition and takes errors,it is of primary partitions that is about 77GB that windows 7 had installed on it ,but when i install ubuntu ,it can be installled without any error ,when i asked for this one said me that ubuntu has grub installer that reference to another where for primary partition ,
View 1 Replies View RelatedWhat's the "Force to be primary partition" in Fedora partitioner? At least it doesn't work for me, it only uses primary partition using Fedora XFCE Live CD ( the only one that I checked that ).
View 5 Replies View RelatedI'm trying to convert big ext4 partition to logical. I was able to do that with Arconis Disk Director Home 11 with swap and ext3 partition, but it doesn't recognize ext4.
Unfortunately I can't copy 2TB data to another HD Now I have:
Pri /boot ext3
Log / ext3
Log swap swap
Pri /media/X ext4 <- 2TB
Initially I had vista and redhat 9 due to some reasons i had to re instal my vista again.. since then the dual boot menu disappeared.. i tried to re install redhat and changing the boot configuration of redhat 9 but i am not getting both the OS back .. I am not aboe to boot linux redhat 9 .. please check the attached screenshots for details .. Vista is getting on fine but no redhat .. every time i try to fix the issue i get an error message "Unable to align partition properly..incorrect BIOS geometry .plz check the attached files.
View 5 Replies View RelatedI have installed oracle enterprise linux on VM ware with 20 gb allocated to guest OS. Now I want to install oracle apps in the guest Os, so I need to extend the volume. I have extended in Vm , but I have to partition in the guest OS, for that purpose I am using Gparted. But I am unable to extend to sda1. I need to have all the unallocation space allocated to sda1. Here is the screen shot, how can I do that. Right now when in press the command df -h in terminal I am gettig 18 gb as space available for sda1, I want to make it 200 gb, in which I would like to install oracle apps. Check out my screen shot.
View 5 Replies View Relatedcreating a new partition when i have only primary partition on my 40gb harddisk.
what i did while installation was selected use entire partition and now i want a additional partition other than primary ?
I want to assign 10GB for Primary one and wanna create Two 14GB partitions , I Also dont know what Swap partition Is.
Since i am a month old ( January 2011 ! ) UBUNTU user who hates MS Windows now, if i gets this problem solved , i can convince more people to replace their OS to Ubuntu .
I download F11 x86_64.ISO and burn it into a DVD, but when I boot my machine with EFI to EFI SHELL, I can't find entry to install F11. Who know how to install F11 in EFI shell and on a GPT partition disk? Is there any guide to do this? BTW, I can successfully install win7 x64 from the EFI shell and install win7 on a GPT disk. but there are some problems when I install F11.
View 9 Replies View Relatedi tried all the options but none of them work because windows broke im using it right now
View 2 Replies View RelatedI've just got a new laptop running windows vista 64 bit but going to be removing that & installing fedora 11 on it & seeing as Ubuntu doesn't come with a pae kernel as standard yet, fedora is the way to go . the Hard drive is 2x500 gigs running in raid 0 mode here's how I would like to install fedora
Partition for the software that I install (the main file Partition)
Partition for swap
Partition for temporary files
Partition for my home Partition
what's the best way to go around doing that? (that's means using 250 gig Partition's for each, which I don't mind doing) I've never Partitioned a drive before as I've always let the OS do it for me, but this time I want to Partition it myself Or as anybody get other better way's I'm open to Idea's the laptop in question is dual core 2 running @ 2.8 1066 with 6meg cache (or what ever it's called) 8.192 gig of ram, 17" widescreen monitor, 256 Meg graphics card, bluetooth, wireless, 3g Module built in, 2x500 gig (raid 0) blue-ray(reader) /DVD-rw
I used Acronis' Disk Director Suite 10.0 ["DDS"] to create 7 logical partitions of 23GB each, into one of which I asked Fedora 11 to install. Fedora 11 completely ignored me and created 2 primary partitions of its own: a 217.4GB, a 2GB and a 2GB "unallocated." I will likely delete this installation for a number of reasons. How can I force fedora to install into a 23GB logical partition that I created for just that purpose? If I can't use DDS-created partitions then why do I need DDS-created partitions?
View 8 Replies View Relatedright now I've been playing around with Ubuntu using Wubi and I would like to actually install Ubuntu onto its own partition. But I dont want to lose my Windows OS either (I need it for applications like MATLAB and LabVIEW).
My issue is, my laptop currently already has three primary partitions. One for windows, one for recovery and one "SYSTEM_DRV" (used to hold OEM windows license info apparently). I dont want to mess with any of those partitions. my question is, can I still install Ubuntu when I only have one primary partition?
I read about extended and logical partitions in the guide, but the wording was pretty confusing. All it said was Ubuntu needs two partitions, it didnt say if the partitions could be any type.
I'm using xp with one primary partition(C) for xp os,three logical drives(All NTFS).Now i want dual boot with red hat linux.When i inserted the dvd and booted from dvd,it is not going further from starting menu page(press F1-help,....F5-rescue mode).When i installed in vmware it was installed properly.But here why it was not running.I can't buy another hard drive for linux,i have to use the existing disk for both xp and linux....
View 3 Replies View RelatedI have recently ghosted, using g4u, an 80 gig drive to a 30 gig drive. The data size is about 15 gig so no problem there.The system does work and it doing everything it should, except for some errors in dmsg log.The thing is though, that the system works! all the services are running and live.And i have years worth of customizations in this machine. Has been running for several years, so i dont just want to reformat and reinstall. Its hard to get linux the way you want it sometimes!So my question is this, is there a way to fix my partition or somehow tell the machine what the current boundries <i>should</i> be?
View 5 Replies View Relatedjust got a new laptop with Windows 7 Home Premium 64bit pre-installed, and when I boot into my 11.04 CD, there is no simple option to install alongside windows 7. Only the options to erase the entire disk (wiping windows) or manually specifying partitions. I'd like to keep my windows install as I use it for gaming, but I don't want to mess around with partitions while I don't know what I'm doing. According to the 'Allocate disk space' part of the installation, all 4 primary partitions are being used, a main one for the Windows 7 install, one entitled HP tools, and another two I forget the names of. I have looked up that I may need to turn a primary partition into an extended one,
View 9 Replies View RelatedI'm having some issues upgrading my F9 to F12 using 'preupgrade' so I'm looking for anybody who has ever been able to complete a preupgrade from F9 x86_64 to F12. The error message I receive is TypeError: Parsing primary.xml error: attributes construct error. To my knowledge this has been reported as a bug in F10 which was resolved by a yum update to version 3.2.24.
For F9 the latest yum version is 3.2.21 which has this Parsing error bug that prevents the preupgarde to continue. Interesting enough that the preupgarde lets me select Fedora 12 and progresses with all the preupgrade steps properly until the parsing error occur. How to fix this Parsing error on a F9 x86_64 system.
I got an acer aspire 4310 with vista pre installed.
I installed fedora 10 on the D:/ drive by setting the D:// drive as free space within vista and then installed fedora 10. So now I have dual boot vista and fedora using grub.
How can I delete vista and install Fedora 12 on that C:// partition and be able to keep and boot my fedora 10.
Has anyone here done this before?
I have a 1TB WD Caviar green hard disk with Ubuntu 10.04 on it. I used a Gparted live cd to resize the Ubuntu partition and made two ext2 partitions 100GB each. When I tried to install Fedora 11 and told it to install in the free space it told me there wasn't any. I went back and deleted a partition, leaving it as unallocated space. It still wouldn't install! I downloaded Mandriva Linux and it installed in the unallocated space just fine. How do I get Fedora to install?
View 4 Replies View RelatedMy laptop came with a hidden partition for restoring Vista instead of an install disk. I installed Ubuntu 9.04, which had an "Advanced" option that allowed me to install grub in the Ubuntu partition without writing over the MBR. Then I used EasyBCD to add Ubuntu to the Vista boot loader. I wanted to do this so that I can still restore the factory copy of Vista from the hidden partition if I need to. I upgraded the Ubuntu to 9.10, still using grub. When I did a fresh install of Ubuntu 10.04 it went to grub2, and I haven't figured out how to boot into it with EasyBCD yet.But I would like to try Fedora anyway. I will wait a couple of days and get 13.
1. Which grub does Fedora 13 use?
2. Will Fedora 13 allow me to install grub in its own partition without writing over the MBR?
I just installed Fedora on my pc with windows XP pre-installed (dual boot). I had the same setup with ubuntu before with no problems. My ntfs windows partition is of 15 gb approximately and the remaining space that was available for fedora was about 220 GB (non partitioned - I removed all the partitions excepting the windows one using gparted from liveCD prior to beginning installation) ..........after installation etc etc.....my home folder shows me only 150GB of space.....what's happening? Where has all the remaining space gone to?
View 8 Replies View RelatedI just installed win 7 and now can't install fedira 13 on the partition that i made for it on the same drive. The problem is that after installation of win 7 i lost the ability to boot form cd. In bios i still have cd set up to boot first and drive second, but win 7 did something that overrides bios set up. I even tried Esc for boot menu, then i select to boot form cd, but it still boots in windows.
View 1 Replies View RelatedI have installed grub.efi in the ESP partition which is able to load ubuntu 9.04.I think it works with fedora 11 x64 as well. And I tried to install fedora in the partition which was used to install ubuntu. But the installer keep telling me that ext4 partitions are not bootable. But I don't need to install a boot loader on that partition
View 4 Replies View Relatedhow do I install fc12 from a hard drive partition? I downloaded thec12 dvd iso file...when I burned this to a DVD it wanted to install from my DVD and not a file on external media.---------- Post added at 08:03 PM CST ---------- Previous post was at 07:53 PM CST ----------this looks like it:[URL]
View 5 Replies View RelatedI had Vista installed then Ubuntu Grub showed both... then I wanted to try Fedora 13 an after install I had Fedora Bootloader but it only shows Fedora / other and other is Vista... how do I manually enter Ubuntu partition into /boot/grub.conf or should I just reinstall ubuntu grub and hopefully that will pick up vista and fedora? Lost on where to go with this.
View 6 Replies View RelatedI've just installed Fedora 14 over an old Ubuntu (heron, I think). The old install used a single partition for both / and /home; and I wanted to try to avoid reinstalling /home if possible (but yes, I did back it up). I chose the anaconda option to shrink the old Ubuntu /, and created a new LVM for the Fedora /. This seemed to work perfectly. I mounted the old / on '/host' (an old naming habit), and then mounted individual home dirs into /home using autofs. All seemed fine. However, on my first reboot after the autofs mounts fsck failed. The current situation is as follows:
# fsck /dev/sda6
fsck from util-linux-ng 2.18
e2fsck 1.41.12 (17-May-2010)
The filesystem size (according to the superblock) is 15360000 blocks
The physical size of the device is 15359895 blocks
Either the superblock or the partition table is likely to be corrupt!
Abort<y>? yes
# dumpe2fs /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
# dumpe2fs -o superblock=32768 /dev/sda6 | grep 'Block count'
dumpe2fs 1.41.12 (17-May-2010)
Block count: 15360000
Same thing for all the other backup superblocks I've tried.
# echo '15360000 4 * p' | dc
61440000
# fdisk -s /dev/sda6
61439583
Resize2fs tells me to run fsck, and complains of a short read if I try to force. Fsck seems to run fine if I say 'no' to the abort prompt, but doesn't change the problem. Filesystem is ext3. Started with debugfs. First used icheck and ncheck to work out which file(s) had been written to the non-existent blocks past the partition size. Fortunately, there was only one. Deleted that file (can restore it from backup later). Quit debugfs. Now resize2fs -p -f worked perfectly. fsck after resizing was clean. Reboot seems happy. As for the origin of the problem, I would guess there's a rounding bug in the code anaconda uses to shrink partitions.
About 3-4 years ago I installed a new harddrive in my computer (XP Pro) and moved the old system disk drive to be secondary. I installed Grub and partitioned it in half. I installed Fedora on one partition and installed XP on the other. Now I want to keep the XP and replace the Fedora with another Linux like Ubuntu or Mint to try them out. I am not sure what I need to do to replace the Fedora and keep XP. Could someone give some idea how this would be done? I don't remember exactly how I did it at the time or what tools I had used or what I will need.
View 1 Replies View RelatedI'm planning FC11 x86_64 with a live cd , but I would like to preserve my /home partition that is in ext3 . or is there a way to do an install and keep my /home and convert it after in ext4
View 1 Replies View RelatedI am trying to install 2 or 3 versions of linux on my hardisk of 500GB capacity.The configuration of my machine is Intel Dual Core, 4 GB Ram, 3.0 Processor Windows XP is not installed on this.I tried to use a tool called GParted but was unable to use as it was not able to bring up the XServer So I booted the machine with fedora14 installation CD and chose "Custom Layout" After reading about the partitions needed by Fedora I created 3 partitions in /dev/sda
/dev/sda1 the boot of 500MB formated as ext4
/dev/sda2 the swap of 6096MB formatted as swap
/dev/sda3 / size 150GB formatted as ext4
The installation went well and fc14 runs well on this.
However when I went to install the other linux version ....the installer was not able to recognize the unallocated space of nearly 350 GB on the hard disk.....So I am not able to create new partitions and then install the new linux on the newer partition.As a result I am unable to make use of the remaining space on the HDisk.I think I should have created /dev/sda4 /dev/sda5 etc when I installed fc14 itself....
Would appreciate some tips on how to install the other versions of Linux on this HDisk....
I am doing a fresh install of Fedora 10 64bit on my PC. What I have done is, freshly installed Vista Home Premium 64 bit on the entire Hard Drive (680GB), then fired up the live CD and told the installer to resize sda1 (The windows partition) to about a 60:40 ratio. I intend to dual boot the system
Now the thing is, it's been running for half an hour now and there's no progress indicator on the installer so I don't know if its actually doing anything. Well there is a progress indicator but it's nonsensical, it just moves backward and forwards. The HDD indicator LED on my computer is flashing every now and again, but not constantly as I expect it to?
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies View Related
