Ubuntu Installation :: Turn A Primary Partition Into An Extended One?
May 27, 2011
just got a new laptop with Windows 7 Home Premium 64bit pre-installed, and when I boot into my 11.04 CD, there is no simple option to install alongside windows 7. Only the options to erase the entire disk (wiping windows) or manually specifying partitions. I'd like to keep my windows install as I use it for gaming, but I don't want to mess around with partitions while I don't know what I'm doing. According to the 'Allocate disk space' part of the installation, all 4 primary partitions are being used, a main one for the Windows 7 install, one entitled HP tools, and another two I forget the names of. I have looked up that I may need to turn a primary partition into an extended one,
View 9 Replies
ADVERTISEMENT
Nov 29, 2010
Around 2008 i seem to remember PartEd on the command-line was able to rescue deleted partitions and gave a choice of whether to recover the partition as a Primary or Logical Partition. I have tried testdisk but didn't really grok what i was doing. I successfully moved a "Windows Recovery" partition to the end of my hard-drive, immediately after the drive's Extended Partition.
View 3 Replies
View Related
Sep 9, 2010
I somehow messed up my filesystem. I installed Ubuntu directly with LVM. This created an extended partition including a logical one. When I run out of space, I just increased my space (through VMware) and then added a new PRIMARY partition.
Then I added this one to the volumegroup and increased the logical volume. After I did this a few times, there were no longer any primary partitions allowed (only 4). Then I resized the FS, resized the logical volume, resized the volume group, and removed the physical volume. Now I'm no longer able to create an extended volume (only one) but it's not at the end (there are other primary partitions behind this one at the disk), so I'm not able to create some logical volumes.
What is the best possibility to add some space to the LVM and being able to do this a few times in the future again?
further info:
pvscan:
fdisk -l for sda:
There was a /dev/sda3 at the end of the disk. I already deleted this partition.
So the order on the disk is: sda1 | sda2 (extended) | sda5 (logical referred in sda2) | sda4 | free space
Does it matter that there is type "Linux" for sda4 or can I without damaging the lvm just change it (with cfdisk) to "Linux LVM"?
View 6 Replies
View Related
Mar 13, 2011
I formatted a 16GB USB flash drive via right click. Then I ran gparted and got as far as this [image attached]
Do I choose Primary Partition or Extended Partition for this second partition?
View 4 Replies
View Related
Nov 5, 2010
I'm currently dual booting Windows 7 64bit and Ubuntu 10.10 each on primary partitions. Then on the other 2 partitions I have the manufacturer recovery partition (which I am not sure I should remove...), and then a partition for storage and files. Now I want an Arch Linux installation on the hard drive, but obviously I cannot create a new primary partition because I already have 4. I found out that linux can run from a logical partition (which you can have multiple of)..However I do not want to format my Ubuntu partition and I'd prefer to keep the data on there all intact. Is there a way to move my Ubuntu installation (on the primary partition) to an extended partition where I could put multiple logical partitions for multiple linux installations?
View 2 Replies
View Related
Jun 24, 2011
The difference between primary or logical and extended partition in disk management in redhat linux
View 1 Replies
View Related
Mar 26, 2010
For a fresh installation using manual partitioning, one single disk (IDE).
If I selected:
For the root partition, I would like to use ext4, 10GB, but by default, the partition type 'extended' is suggested. Would there be any difference (advantages, inconveniences) if I selected the primary partition instead?
View 6 Replies
View Related
Jul 12, 2010
I'm setting up my laptop to dual boot (default Vista installation and Ubuntu). There's also a possibility I may add XP later as a triple boot.
My laptop came with two partitions already, the second one labelled "Recovery". I was planning on adding three partitions, one for the Ubuntu installation, one for Swap, and one for storing my files (accessible to both OSs). However, this would be five partitions (or six, if I add XP later).
I've never had to deal with this many partitions before and just learned about the maximum of four primary partitions.
View 3 Replies
View Related
May 12, 2011
I am not really sure if the title makes any sense or if it even possible. Basically I am currently triple booting with Mac osx on the first partition windows 7 on the second and ubuntu linux on the 3rd with a swap partition. So basically on my 2TB harddrive
Mac (200gb)
Windows (200gb)
Linux (200gb)
Swap (8gb)
NTFS(1592gb)
The last partition is formatted as ntfs using Gparted, windows cannot detect it. The windows disk partitioner shows the swap and ntfs partitions as unformatted. I can unformat the space and use the windows partition to add format it as ntfs but it would format the linux swap partition as well. I am worried that it could potentially screw up everything on my harddrive. My question is. What do I need to do to get the ntfs parition recognized by windows (should I use the windows partitioner)?
View 1 Replies
View Related
Oct 14, 2010
I am installing opensuse on my laptop. Dual boot with Windows 7. Two partitions are already taken by windows. I am confused about extended partitions. I know I will need one because I can only have 4 primary partitions.
Here are the partitions I want:
Is there a certain order to create these? Does it matter which ones are primary partitions and which one are part of extended partitions?
View 4 Replies
View Related
Jun 27, 2011
What are the advantages (or disadvantages) in partitioning a disc into 4 Primary partitions versus 1 Primary & 3 Extended Partitions?
View 4 Replies
View Related
Feb 22, 2011
creating a new partition when i have only primary partition on my 40gb harddisk.
what i did while installation was selected use entire partition and now i want a additional partition other than primary ?
I want to assign 10GB for Primary one and wanna create Two 14GB partitions , I Also dont know what Swap partition Is.
Since i am a month old ( January 2011 ! ) UBUNTU user who hates MS Windows now, if i gets this problem solved , i can convince more people to replace their OS to Ubuntu .
View 3 Replies
View Related
Apr 13, 2011
When my netbook has an extended screen, using an external monitor, all of the panels stay on the netbook, not the big monitor. When I connect an external monitor, I want to use it as my primary screen. I only really intend to use the netbook screen for skype calls (so I am looking into the webcam, and not away from it) since it is so small. I wish the secondary screen to be the netbook, not the external monitor. How can I do this?
View 1 Replies
View Related
Oct 26, 2010
I have been attempting to set up a bunch of partitions on a bunch of hard disks, in preparation for installing Maverick. I will be setting up a number of RAID partitions, so I will install from the alternate disk (ubuntu-10.10-alternate-amd64.iso). Now ever since they added support for GRUB2 and a new partition type and align-to-megabyte and a whole bunch of other goodness, partitioning has been buggy. This has been true for Maverick and Lucid. Even the 10.04.1 version (an Ubuntu LTS!) still has problems. Every time I try something else, some other bizarre bug rears its ugly head. (Yes, I have been reporting them on Launchpad when I find a new one.)
In order to move forward on this project, I have been using a variety of partitioning tools. I temporarily installed Maverick on a small partition, and have used Disk Utility (palimpsest) and GParted while booted into that. Occasionally when things get really strange I boot up the latest version of System Rescue Disk, which contains the latest version of gparted. I use these various tools to try out various partitioning schemes, just laying out empty partitions that will be formatted or assembled into RAID arrays later. When I get all the desired partitions set up, I will boot into the alternate installer and do the final installation. (I don't want to do the entire thing within the alternate installer because it makes my head hurt. I do have a lot of partitions.) This has been going on for weeks now. Every time I try something different, something weird happens, and I have to try various workarounds, or switch to different tools. Basically, my partitions eventually become unstable.
Here's the latest mind boggler: Disk Utility displays nice graphical maps of your partitions. This image includes before and after screenshots showing what happens to my partitions occasionally. We start with three primary partitions and one extended partition. The extended partition goes all the way to the end of the disk. We put a small logical partition into the extended partition, at the beginning of it. We can then click on the "free" portion of the extended partition and create additional logical partitions if we like.
Afterwards, the extended partition has magically shrunk itself down until it is the same size as the small logical partition it contains. The free space has migrated out of the extended partition, and is now useless, as you can't have more than four primary+extended partitions. Disk Utility won't let you create another partition. What happened between the Before and After pictures? I don't know. I do know that I did not ever tell any tool to change the size of any partition. Moving or resizing partitions can trigger various known bugs, so I never even try to do that, I just delete partitions and start over.
View 3 Replies
View Related
Oct 31, 2010
I've installed Windows 7 + XP + Ubuntu 10.10 and Mac Os X on my PC. The problem is that XP wont boot. I've tried a lot of fixes for the last 2 days but still nothing. So I've come to conclusion that it might be probably due to its partition (dev/sda being inside of another Extended partition (dev/sda3) as you guys can see on the attachment. If so, how can I move it out of the extended partition.
View 9 Replies
View Related
Apr 8, 2011
I have Ubuntu 10.10 installed on my 80gb hdd, disk has following partitions :
1. /dev/sda1 = /boot (500mb)
2. /dev/sda2 = / (20000mb)
3. /dev/sda3 = linux-swap (2000mb)
4. /dev/sda4 = extended (7000mb)
5. /dev/sda5 = /home (7000mb)
6. unallocated = (40000mb)
how can i use this unallocated space to create an NTFS partition.
View 9 Replies
View Related
Aug 3, 2010
how to create extended ext3 partition using GParted? Every time I select "New" for unallocated space I can only create primary partition. Other options (extended and logical) are always greyed out.
View 5 Replies
View Related
May 27, 2011
I installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
View 4 Replies
View Related
Feb 3, 2010
I recently installed Jaunty in my departmental machine which is having 70 GB harddisk and 512 MB RAM. Before installing I partitioned the Hard disk by using Gparted of Live CD into Four compartments namely
1. Primary partition of 30 GB of file type ext3
2. Extended partition of 39 GB which I divided again into two logical Partition of 20 GB and 19 GB. Labelled it as D and E
3. 1 GB of swap partition
I installed the Jaunty in primary partition, gave the mount point as /The problem is I am not able to copy or save file in the extended partition namely D and E
View 9 Replies
View Related
Mar 31, 2011
I bought a PC with Window Vista on it as my partner needs it. Using gparted I set up Primary partitions for Vista OS (sda1) and Ubuntu OS (sda2), plus an extended partition for Vista files, Ubuntu /home and swap:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3969 31880961 7 HPFS/NTFS
/dev/sda2 3970 5294 10643062+ 83 Linux
[code]...
My problem is Vista (as always). The 30GB I allocated is not enough, even just for the OS and it won't now boot from GRUB, though I can see it from GRUB. I don't want to do anything that risks a problem for Ubuntu. Will grub still see both OS if I wipe sda1 (Vista OS) and reinstall Vista OS on the extended partition sda6? Ideally I would like to merge sda1 with sda6 and install Vista on that, but that looks way too risky / impossible.
Edit - There is another drive on the PC which is much larger and I use for backup. Is there any scope for installing Vista on that one so that GRUB still identifies both. Not ideal as I like having one as the backup for the other.
View 4 Replies
View Related
Oct 12, 2010
right now I've been playing around with Ubuntu using Wubi and I would like to actually install Ubuntu onto its own partition. But I dont want to lose my Windows OS either (I need it for applications like MATLAB and LabVIEW).
My issue is, my laptop currently already has three primary partitions. One for windows, one for recovery and one "SYSTEM_DRV" (used to hold OEM windows license info apparently). I dont want to mess with any of those partitions. my question is, can I still install Ubuntu when I only have one primary partition?
I read about extended and logical partitions in the guide, but the wording was pretty confusing. All it said was Ubuntu needs two partitions, it didnt say if the partitions could be any type.
View 9 Replies
View Related
Jan 9, 2011
I successfully partitioned my desktop with Gparted and made it into an XP/Ubuntu dual boot.
Now i'm trying to do the same with my netbook (eee pc 1000he), and the existing partitions look funny:
How should I change this to prepare for installing Ubuntu? Can I just install to the unallocated space on the extended partition? I don't need optimal efficiency here, I just need to know where to install Ubuntu for a workable dual boot.
It's confusing to me that Windows is on an extended partition, and also that /dev/sda2 has the boot flag (this drive contains nothing but two undeletable folders titled "amd 64" and "i386"). This set-up is the result of a Windows re-install at a sketchy computer shop.
View 9 Replies
View Related
Sep 5, 2010
I have recently ghosted, using g4u, an 80 gig drive to a 30 gig drive. The data size is about 15 gig so no problem there.The system does work and it doing everything it should, except for some errors in dmsg log.The thing is though, that the system works! all the services are running and live.And i have years worth of customizations in this machine. Has been running for several years, so i dont just want to reformat and reinstall. Its hard to get linux the way you want it sometimes!So my question is this, is there a way to fix my partition or somehow tell the machine what the current boundries <i>should</i> be?
View 5 Replies
View Related
Apr 16, 2011
I have XFX ATI-HD5670 and use proprietary catalyst 11.2-1 in 64-bit Fedora 14.
I am not sure when this started, or if it ever did work before, but when I started noticing that the screensaver will not turn off the monitor, I set the gnome power manager to make the monitor sleep after an hour.
Now, the display will not turn back on after it has been in sleep mode. I know the system is still running fine as I can ssh from another PC and see that everything seems to be normal, no error message in dmesg, /var/log/Xorg.0.log, etc.
/var/log/Xorg.0.log shows that monitor DPMS is not detected but still enables DPMS:
Is this a problem with catalyst driver? I know it's not the PC or the monitor, because I have a 2nd PC with the same video driver with the same problem, but others without this driver don't (ati open source, nvidia, etc. all work fine.)
I'm wondering if the problem always existed before, but I just didn't notice it because the display sleep mode was never set? If that's the case, my hunch is that it looked like it worked because the monitor was smart enough to turn itself off when the screensaver kicked in and just showed a blank screen, and the video driver was never involved with sleep mode until I set it in gnome power manager, at which point it started showing this problem of not waking up? And because the screensaver was no longer set to blank the screen, but to show some animation, that's why the monitor will never sleep anymore?
View 2 Replies
View Related
Dec 25, 2009
when i install fedora 11 after windows 7 ,i can not partition and takes errors,it is of primary partitions that is about 77GB that windows 7 had installed on it ,but when i install ubuntu ,it can be installled without any error ,when i asked for this one said me that ubuntu has grub installer that reference to another where for primary partition ,
View 1 Replies
View Related
Jun 2, 2010
extended sata partition shrunk at 15 partition limit, how to re-enlarge i hit the 15 partition limit, forgetting it now exists for sata drives, thinking i would add more. upon creation of the 15th, it squished the end of the extended partition to meet the last logical partition, leaving a large unallocated portion after the extended partition, which seemingly nothing can be done with, just sat being wasted space. i have since deleted a few of those partitions, but so far have still failed to find a way to recoup the unallocated space back into the extended partition.
[URL]
if necessary, i'll do it the painful long winded way of backing up and starting the extended partition again from scratch, but i really rather wouldnt have to do that. i'm sure there must be a way of telling the extended partition to once again reach the end of the drive.
View 3 Replies
View Related
Jan 29, 2011
I want to convert a vfat partition into an ext4 partition. This is on my wife's machine and she deleted the Windoze partition as she now prefers Linux. Here is the (edited) output from fdisk -l:-
/dev/sda2 514048 4708351 2097152 83 Linux
/dev/sda3 4708352 6805503 1048576 82 Linux swap
/dev/sda4 52693200 234436544 90871672+ f W95 Ext'd (LBA)
/dev/sda5 59006800 234227699 87610446 83 Linux
I want to change /dev/sda4 to 83 to free up space for Linux without losing the partitions in this 'extended' partition!
View 6 Replies
View Related
May 18, 2010
I've got a server that needs more space. To achieve this we added space (by extending the VMware disk attached to it).Normally this isn't an issue, because we just add an new partition and LVM it from there, but this host predates our deployment of LVM everywhere.
Our current theory is that the unallocated sectors can not be assigned because they aren't part of the extended partition, and thus ... we go in a circle.So what i believe the way forward is to extend sda4 so that i can then create an sda10 inside of it. Anyone have any ideas on how to do this? I was thinking gparted may do the trick ... but being a server i'm in runlevel3, with no X...
View 5 Replies
View Related
Jun 13, 2011
I would like to create Logical partition in Extended partition using fdisk in Fedora 14 I created extended but fail to create logical partition.
View 6 Replies
View Related
Nov 30, 2010
I've got a windows partition with a lot of free space followed by an extended partition. The extended partition has three sub-partitions: grub/boot&everything else, home, swap.
I'd like to take some of the free space out of the NTFS partition and move it down into the extended partition for Ubuntu to use.
I've successfully shrunken the NTFS partition. Now I've got 5gb of unallocated space between the end of NTFS an start of the extended partitions.
Now I want to extend the boot/everything else sub-partition within the extended sub-partition.
Using the gParted live CD I'm:Resizing the extended partition (growing it forward by 5gb)
Resizing the boot/everything sub-partition forward by 5b
When I try to apply the changes I get an error: Unable to satisfy all constraints on the partition.
Is it possible to move this space into my extended partitions so Ubuntu has more space?
View 6 Replies
View Related
