Red Hat / Fedora :: Vista & Redhat -Incorrect Primary Partition
Aug 15, 2009
Initially I had vista and redhat 9 due to some reasons i had to re instal my vista again.. since then the dual boot menu disappeared.. i tried to re install redhat and changing the boot configuration of redhat 9 but i am not getting both the OS back .. I am not aboe to boot linux redhat 9 .. please check the attached screenshots for details .. Vista is getting on fine but no redhat .. every time i try to fix the issue i get an error message "Unable to align partition properly..incorrect BIOS geometry .plz check the attached files.
View 5 Replies
ADVERTISEMENT
Feb 1, 2010
I'm using xp with one primary partition(C) for xp os,three logical drives(All NTFS).Now i want dual boot with red hat linux.When i inserted the dvd and booted from dvd,it is not going further from starting menu page(press F1-help,....F5-rescue mode).When i installed in vmware it was installed properly.But here why it was not running.I can't buy another hard drive for linux,i have to use the existing disk for both xp and linux....
View 3 Replies
View Related
Oct 17, 2010
I'm trying to convert big ext4 partition to logical. I was able to do that with Arconis Disk Director Home 11 with swap and ext3 partition, but it doesn't recognize ext4.
Unfortunately I can't copy 2TB data to another HD Now I have:
Pri /boot ext3
Log / ext3
Log swap swap
Pri /media/X ext4 <- 2TB
View 2 Replies
View Related
Jun 27, 2010
I have installed oracle enterprise linux on VM ware with 20 gb allocated to guest OS. Now I want to install oracle apps in the guest Os, so I need to extend the volume. I have extended in Vm , but I have to partition in the guest OS, for that purpose I am using Gparted. But I am unable to extend to sda1. I need to have all the unallocation space allocated to sda1. Here is the screen shot, how can I do that. Right now when in press the command df -h in terminal I am gettig 18 gb as space available for sda1, I want to make it 200 gb, in which I would like to install oracle apps. Check out my screen shot.
View 5 Replies
View Related
Jun 25, 2011
i have newly bought windows7 installed hp laptop. how to install fedora in it? currntly it has 4 partitions,
1.recovery
2.c:
3.hp tools
4.system
there are plenty of spaces free in c:. but not able to shrink through windows disk management. how to install linux in it?
View 3 Replies
View Related
Dec 25, 2009
when i install fedora 11 after windows 7 ,i can not partition and takes errors,it is of primary partitions that is about 77GB that windows 7 had installed on it ,but when i install ubuntu ,it can be installled without any error ,when i asked for this one said me that ubuntu has grub installer that reference to another where for primary partition ,
View 1 Replies
View Related
Nov 29, 2010
Around 2008 i seem to remember PartEd on the command-line was able to rescue deleted partitions and gave a choice of whether to recover the partition as a Primary or Logical Partition. I have tried testdisk but didn't really grok what i was doing. I successfully moved a "Windows Recovery" partition to the end of my hard-drive, immediately after the drive's Extended Partition.
View 3 Replies
View Related
Dec 29, 2010
I'm slack 13.1, I am trying to install it, but always gives an error. I type cfdisk and appears this error:
Fatal error: bad primary partition 2: Partition ends in the final partial cylinde Press any key to exit cfdisk
View 14 Replies
View Related
Jan 18, 2010
So I tried adding a new, 2nd hard drive to my Ubuntu 9.04 desktop for some additional storage and only managed to kill my system so that it won't boot up anymore (I just get a blinking cursor after the BIOS does its thing).I could sure use a little help getting back to a functioning system, and then adding the second drive. I tried following the instructions from this link to add the 2nd drive:
(So the forum rules won't let me post the link, neato. Here it is with spaces added):
h t t p s : / / h e l p . u b u n t u . c o m / c o m m u n i t y / I n s t a l l i n g A N e w H a r d D r i v e
[code]....
View 1 Replies
View Related
Apr 8, 2010
i hv 3 os installed ...windows7,ubuntu9.10 and redhat5.3can ne1 tell me how to mount ext4 partition from redhat....because after installing redhat ubuntu is not booting....or can ne1 tell me how can i boot ubuntu by editing grub.config
View 7 Replies
View Related
Dec 30, 2010
Fedora 14 xfce
I have the following partition setup. I would like to know how can I convert the logical partition sda6 to a primary partition.
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
I would like to convert sda6 to a primary partition, the reason for this it to install windows 7 starter.
View 3 Replies
View Related
Feb 22, 2011
creating a new partition when i have only primary partition on my 40gb harddisk.
what i did while installation was selected use entire partition and now i want a additional partition other than primary ?
I want to assign 10GB for Primary one and wanna create Two 14GB partitions , I Also dont know what Swap partition Is.
Since i am a month old ( January 2011 ! ) UBUNTU user who hates MS Windows now, if i gets this problem solved , i can convince more people to replace their OS to Ubuntu .
View 3 Replies
View Related
Mar 13, 2011
I formatted a 16GB USB flash drive via right click. Then I ran gparted and got as far as this [image attached]
Do I choose Primary Partition or Extended Partition for this second partition?
View 4 Replies
View Related
Aug 15, 2009
I am trying to install Fedora on my machine, Vista currently installed. During the install process, I select the partition which I created, but install program says I must define a ROOT partition. How do I do this?
View 6 Replies
View Related
Mar 27, 2009
I installed fedora 10 on my laptop as a partition with vista. However i'm now not able to boot into my vista partition as everytime I try it comes with an error saying "bootmgr" is missing. Below is whats in my grub.conf file. However I am able to access my vista partition through fedora.
default=2
timeout=5
splashimage=(hd0,4)/grub/splash.xpm.gz
[code]....
View 1 Replies
View Related
Apr 4, 2011
What's the "Force to be primary partition" in Fedora partitioner? At least it doesn't work for me, it only uses primary partition using Fedora XFCE Live CD ( the only one that I checked that ).
View 5 Replies
View Related
Oct 17, 2009
I first noticed this behaviour with Fedora 9, so I guess the install process is behaving as intended. However, when I install grub in the linux boot partition, SDA 6 with my current configuration, I would like my Vista partion to remain active. I use EasyBCD in Vista to control booting, as I have more Vista systems than linux systems. Currently, I have to boot the Vista install DVD after every Fedora install to do a start up repair on the hard drive. After the Fedora install, the Vista partition is marked inactive and needs to be marked active again. IMHO, if the linux boot loader is loaded in the linux boot partition, the currently active Windows partition should be left active. Unless I'm missing something, the MBR on the drive is going to be pointed at some other partition than the linux partition whenever grub is installed in the linux boot partition instead of the MBR. It's not that hard to activate the Windows partition, but after installing a few F12 alpha snaps and beta TCs and RCs, it's getting annoying. Any chance this can be changed?
View 1 Replies
View Related
Oct 26, 2009
this might deviate from "installation" theme.. I'm writing an immediate problem since the last thread: [URL] problem is the vista partition is impossible to shrink now, though there's 50 G free space. Every try found in : [URL] does not work including Perfect disk degrag. I think this is because fedora system is there. some code is written to vista partition..that vista cannot handle.....
View 2 Replies
View Related
Nov 2, 2010
I have a Gateway PC, that came with two partitions(not it is more): Vista + Recovery
I just downloaded and installed Fedora(latest image found on the website)
1. Re-sized Vista Partition to 650 Gb(using utility that came with installation), got 50 Gb free space
2. Installed Fedora on Free space
Decided to boot back to Windows(to check if it was left intact) , Windows boots into Recovery mode. It can't find the partition !
Fedora boots up fine. When my PC starts, it give me message that I have 3-5 seconds to choose what system to boot. Disk Utility shows that my HD is split into multiple partitions.
Really need to get back my Windows Partition. All my work is on it.
View 2 Replies
View Related
Apr 14, 2011
I deleted the wrong line in grub.conf, and now cannot boot into my Windows Vista anymore. I really need to get it back right away, I am trying to do my taxes, and they are on there, and I can't get to them. I added this to grub.conf, but no luck.
Vista
root (hd0,0)
chainloader +1
View 2 Replies
View Related
Mar 21, 2010
I'm a CS Major that wanted to experiment with Linux more. Great idea right?! Well, long story short, I have a HP Dv9815nr Entertainment Notebook PC with Vista pre-installed. I have 2 local SATA HDDs and installed Vista(250GB) and Fedora 12(160GB)(respectively). In order to make life simple for booting purposes, I partitioned the Vista drive to include a 3GB sector for the Fedora Boot partition, so that Grub would run properly.
I recently discovered Sun's VirtualBox (Open Source Virtualization software) and installed several flavors of linux inside of this application on the Vista Disk. Naturally, I installed Fedora 12 in the Virtual Box and reformatted the Linux drive (160GB + 3GB Boot partition).
Everything was fine and then I rebooted. Now I get a Grub error on boot. "Error 22 : partition not found". I would like to restore the Vista MBR using the Fedora 12 Live cd, but I can't repartition the Vista drive under the live installation.
Also, I extended the Vista partition to include the 3GB previously used for the Fedora Boot Sector.
View 4 Replies
View Related
Jan 8, 2009
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
View 5 Replies
View Related
Aug 16, 2009
I have just over 20GB of empty space on C:. When I click it under disk-management, the window comes up and says I can only resize it 192 MB less than what it is. But I have 20GB free. Any ideas on what is wrong? I also have this odd 9.56GB partition that is empty. DM says it's "EISA configuration"...whatever that is. I am planning to allocate about 10GB for F11 if this pans out ok.
View 6 Replies
View Related
Aug 16, 2009
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies
View Related
Feb 20, 2011
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
View 4 Replies
View Related
Jan 29, 2010
I have googled and looked around on the forums but I couldn't find anything that directly answers my question. I have a dual boot set up with Vista and Ubuntu 9.10. My hard drive is partitioned into dev/sda1 (where Vista resides) and dev/sda2 (where Ubuntu resides) and /dev/sda4 which I use as a shared hard drive for the two operating systems.
When I first installed Ubuntu on dev/sda2 I used gparted to make /dev/sda2 a 10 GB partition becuase I wanted to try putting ubuntu on a very small partition. Since then I used gparted to expand /dev/sda2 to 32GB. But when I use System Monitor (System--->Adminstrative----->System Monitor) it shows only that the /dev/sda2 space is 10GB (and says that there are only 2.9 GB) remaining unused. Yet when I use gparted to look at the partitions, it says that /dev/sda22 is 32 GB with 3.9 GB remaining unused.
I am wondering if anyone knows why they show two different sizes and what I can do to fix the size being shown. When I tried to make a tar gz back up of my system iit returned a message warning me that my /dev/sda2 partition was almost full because it put the 1.5 GB tar gz file in my home drive (which I suppose the system monitor only sees as a 10 GB space that already has 7 GB in it).
View 1 Replies
View Related
Feb 25, 2010
i have 2 partitions. one with vista and the other with ubuntu. i would like to make another primary partition from the free space in my ubuntu partition. anyway to do this?
View 8 Replies
View Related
Sep 9, 2010
I somehow messed up my filesystem. I installed Ubuntu directly with LVM. This created an extended partition including a logical one. When I run out of space, I just increased my space (through VMware) and then added a new PRIMARY partition.
Then I added this one to the volumegroup and increased the logical volume. After I did this a few times, there were no longer any primary partitions allowed (only 4). Then I resized the FS, resized the logical volume, resized the volume group, and removed the physical volume. Now I'm no longer able to create an extended volume (only one) but it's not at the end (there are other primary partitions behind this one at the disk), so I'm not able to create some logical volumes.
What is the best possibility to add some space to the LVM and being able to do this a few times in the future again?
further info:
pvscan:
fdisk -l for sda:
There was a /dev/sda3 at the end of the disk. I already deleted this partition.
So the order on the disk is: sda1 | sda2 (extended) | sda5 (logical referred in sda2) | sda4 | free space
Does it matter that there is type "Linux" for sda4 or can I without damaging the lvm just change it (with cfdisk) to "Linux LVM"?
View 6 Replies
View Related
Feb 28, 2011
I have to write a script or program to log the details of the primary partition of a linux server which should be generic. Can anyone tel what is the command in linux to get the list of the partitions and how to find the primary partition among the other. Or can I know from proc filesystem.
View 3 Replies
View Related
Oct 28, 2010
When I set up my current Debian desktop system ( currently squeeze ) in 2007 I allocated only 8.4G to my / partition. Now I find it is getting too crowded with only about 580M free space (worked around CD & DVD burning by creating a /tmp folder in my /home/username folder). My current plan for fixing this is to use gparted running from a live-cd. I will first delete my swap partition and my /home partition then use gparted to enlarge my / partition to 20G. Next I will recreate & format my swap and /home partitions and restore the contents of my /home partition from backup. I will still have lots of room to spare in my /home partition. My system has no extended partitions. My hd is 250G total. I know this will change the UUIDs of the two new partitions but am not sure if it will change the UUID of the expanded / partition. I expect it will. My next step will be to edit my /etc/fstab and put in the new UUIDs which I will get by running blkid /dev/sdb. My backup drive is an ide drive, /dev/sda. My question is am I likely to run into boot problems with grub2? Should I chroot into my / partition and run update-grub before I reboot or wait to see if it will
reboot first?
View 3 Replies
View Related