Fedora Installation :: New F14 Has Taken The Entire Disc Almost?
Dec 28, 2010
I recently installed Fedora 14 on an old computer which was already a dual boot Windows XP/Ubuntu machine. As there weren't many problems I felt encouraged to install it on a newer dual boot (Windows 7/Ubuntu 10.10) machine. Apart from a lot of bother with the wiFi card, all appeared to be well. However, I decided to boot into Ubuntu to make sure that it worked as before and was disagreeably surprised to get a message saying that Ubuntu only had 12.5 Mb disc space left when previously it was installed on an 80 Gb hard drive.
I have had a look at the drive, using gparted and found that there are two ext4 file systems, one on /dev/sdb1 and one on /dev/sdb3 which have used 2.93 Gb and 500 mb respectively. /dev/sdb4 has an exclamation mark (!) beside it and is lvm2 and occupies 68.15 Gb and appears to be unused.
Would it be possible to shrink this lvm2 file system and expand the one that contains Ubuntu. If so, how can I identify where Ubuntu is located? there is also /dev/sdb2 which is an extended partition of 2.93 Gb as well as /dev/sdb5 which is a Linux swap of 2.93 Gb
View 12 Replies
ADVERTISEMENT
Jan 2, 2010
Maybe it's because I love trying something new, or because I love tinkering, but I'm thinking about ditching the dual-boot and going 100% Ubuntu.
I noticed the "Erase and use the entire disc" option during the 9.10 installation, but I instead did a dual-boot.
Here's a screenshot from Softpedia:
So here are my questions:
1) Is there any info (aside from my documents) from Windows I should get before I do this?
2) Will this erase my entire drive (i.e. all partitions)? My HDD has a few partitions and I'd like it to be completely erased and replaced with 100% Ubuntu
3) Will the GRUB loader still be there at startup or will it just go straight to Ubuntu?
View 3 Replies
View Related
Jul 15, 2009
I have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies
View Related
Dec 6, 2009
I'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies
View Related
Mar 3, 2010
I just tried installing Fedora 12 and at the beggining of the install i got this message about my disk which cannot be read until it is initialized, and if i initialize it all data on the disk will be lost. Disk was formated using GUID, and had one HFS+ partition on it. I accidentaly clicked "yes" on that error message, and after realising what I just did (some 2sec later) i pulled out my computer's power cord out.
Now my entire disk is erased, it has no partitions on it, and all data is lost...
How do i retrieve my data from the erased disk, and why did Fedora want to do this to my disk?
View 9 Replies
View Related
May 28, 2010
I had no problems installing the F13 DVD, but when I chose to install it across a 160 GB and 250 GB hard drives, it happily used both of them for the system and left me 40 GB of storage to play with.... at least I think that is what happened. I kind of had the opposite in mind. I know I could have installed it on one and used the other drive for a separate storage location, but for me, it's just easier to have one big storage/system volume and not have to worry about paths and /dev/sdb/images stuff
View 4 Replies
View Related
Jan 19, 2011
I was reading the fedora Disk requirements and it said you need 9 GB of disc space. Which partition should this 9 GB of space be on? I plan on having a / root partition, /home partition, a swap partition, and a /boot partition.
Quote: 1.2.3. Hard disk space requirements for all architectures The complete packages can occupy over 9 GB of disk space. Final size is entirely determined by the installing spin and the packages selected during installation. Additional disk space is required during installation to support the installation environment. This additional disk space corresponds to the size of /Fedora/base/stage2.img (on Installation Disc 1) plus the size of the files in /var/lib/rpm on the installed system.
In practical terms, additional space requirements may range from as little as 90 MiB for a minimal installation to as much as an additional 175 MiB for a larger installation. Additional space is also required for any user data, and at least 5% free space should be maintained for proper system operation. [URL]
View 2 Replies
View Related
Apr 17, 2009
I am new to Linux and so am trying different distros. I have ubuntu which runs ok and installed fedora 9 from a disc on Linux Format magazine which runs ok. However I have tried to upgrade to Fedora 10 from a disc but the pc fails to find the disc. It is the same drive I used approx 6 weeks ago to install Fedora 9 so I am at a loss.
View 6 Replies
View Related
Jul 14, 2009
Somehow the install iso disc won't go into upgrade mode. My f10 is on the hard disk, but needing to be rescued. I would do f11 upgrade; but can't get the disk to do an upgrade. It only wants to install.
Checksum was good, etc. iso is fine. Is there a log file or something which it keeps getting hung up on, thinking it's supposed to install instead of upgrade which I could change or delete?
View 7 Replies
View Related
Aug 4, 2009
Seven times I was downloading the fedora11 disc1 i386 iso and the sha256 checksum was bad. When I try ftp.belnet.be mirror I can get the correct checksum. I understand the copy process between mirrors probably was errors. Becarefull friends. This bad iso aborts the installation process.
View 4 Replies
View Related
Jun 11, 2009
I386 install dvd, gets to the point where it needs to resolve packages and then anaconda crashes. http://jaojbre.users.sbb.rs/anacdump.txt contains detailed log file. Any idea?
View 1 Replies
View Related
Jun 18, 2009
When installing FC 11 after a few questions about language I got:
"The Fedora disc was not found in any of your CDROM drives ...."
I read a couple of the threads on the problem and it seemed people were shooting in the dark for answers. Two issues mentioned were SCSI and DMA problems. If I go into the bios and disable the DMA or SCSI driver, and then I re-enable them after installing Fedora, will Fedora see the DMA or SCSI? Or will the fact that they were disables during installation keep Fedora from recognizing them later?
View 1 Replies
View Related
Jul 31, 2009
I downloaded the 7 isos and burned them to CD properly, but I can't seem to get my Powerbook to startup from CD 1. I've held down "c" while starting up just like usual, but it's not recognizing the CD as a startup disc. It simply goes into OSX or OS9. I'm a Linux novice, unfortunately.
View 1 Replies
View Related
Aug 17, 2010
am running fc10 and windows xp on my laptop.As usual my windows got crashed.When i inserted windows xp cd, the system is not booting from disc properly. It shows inspecting systems hardware and then turns into a blank screen.
View 2 Replies
View Related
Jan 12, 2011
Is this irrelevant if you are using the kde install disc? I want to use a encrypted filesystem. I would think since I am using kde that I would have a graphical interface.
View 10 Replies
View Related
Apr 29, 2009
I am trying to migrate an XP Laptop to FC 11. I downloaded the latest KDE-Live-x86 image and burned it successfully. When I boot with it however, I get the splash screen and no further.Any option I choose, ncluding the CD diagnostics and Memory Test result in the following:invalid compressed format (err=1)--System HaltedI'm certainly no expert, but am not a linux noob either, yet am at a total loss.Google has yielded many theories, but no solutions. It seems that this error is not exclusive to FC 11 either. Older fedoras, as well as non RPM distros seem to be intermittently effected as well.I have verified the MD5 of the iso, and have verified the cd against the iso. The disc gives the same error in another computer. I cannot access the on-disc diagnostics. XP runs fine.
View 6 Replies
View Related
Jan 1, 2011
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
View 9 Replies
View Related
Mar 10, 2010
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
View 4 Replies
View Related
Dec 19, 2010
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies
View Related
May 24, 2010
I have installed win7 and Ubuntu on acer emachines E430. Had some problems with boot but have fixed those with help from here.The problem I didn't see is that when I am in Windows file manager only show half of hdd. I can see the entire one in ubuntu.I dont even see Ubuntu through win. But through Ubuntu I can see win folder.
View 5 Replies
View Related
Sep 6, 2010
I have installed a number of softwares on my system,and well a recent power surge costed me my system with all those softwares,SO is there a way for me to sort of compress or make a live disk of my installation including all the softwares,so even in case of a hard disk replacement,i ay not lose my system.
View 12 Replies
View Related
Feb 2, 2010
I am trying to install Ubuntu 9.10 on my Fujitsu-siemens notebook but cannot see the entire installation screen - the bottom and right side of the screen seems to extend beyond the viewable area so I cannot see the 'next' buttons. I haven't seen any 'safe mode' installation options.
View 4 Replies
View Related
Oct 29, 2010
I have a hdd with several partitions.
sda1 - Fedora
sda2 - windows xp
sda3 - win 7
sda4 - ubuntu
I know how to mount each partition, but what I want is to mount sda, not sda1 or sda3. Just sda.So later, I want to make a copy of MBR of sda.As I know first 512 bytes from sda1 are not the same like first 512 bytes from sda.Thats why I want to mount sda and with dd, copy the first 512 bytes.The problem is how to mount sda, if some partition are ntfs and other are ext3?
View 2 Replies
View Related
Jul 28, 2010
is there a way to actually download the entire fedora repo? i've a friend with dialup who cannot install big things and i want to just downlaod the repository for him. i know ubuntu has some sort of way of doing this. i tried the following:
Code:
sudo yum --downloadonly --downladdir=~/fedora_repo install *.i?86
but this seems to, aside from all sorts of conflicting packages only get the things i dont have installed.
View 2 Replies
View Related
Jun 18, 2011
how to search the entire man pages? I know man -k whatever searched the description but I wanna search the entire man page.
View 3 Replies
View Related
Jan 8, 2011
The last time I attempted to install an alpha release, my entire hard drive was wiped out (it was backed up) because of my ignorance to the installation warnings. Would it be possible upgrade Maverick Meerkat to Natty without editing any partitions?
View 2 Replies
View Related
Mar 29, 2011
I was relieved to read online that I'm not the only first-time Ubuntu user to destroy their system beyond repair and wish to uninstall and reinstall Ubuntu. However, all the tutorials I can find on how to do it are for users who have a dual operating system on their computer, especially XP and Vista. Ubuntu is my sole operating system (I decided to give it a try when my computer crashed and needed to be rebooted with a new operating system).
Is there a way to just remove my entire Ubuntu operating system from my laptop and reinstall it? I've already downloaded Ubuntu onto my jump drive and it's all set to reinstall. Tutorials claim that restarting my laptop with the jump drive inserted in my laptop will automatically startup the Ubuntu installation process but it doesn't, and I'm sure it's because I still have Ubuntu on my laptop.
Stats:
Gateway NV52
Formerly Windows Vista, but that was removed and Ubuntu (Linux) is now the sole operating system
Gnome
Ubuntu 10.04 LTS
View 9 Replies
View Related
Jun 8, 2011
I installed a new 11.04 on my Thinkpad in place of the old 10.10 system, so it replaced the old /home with a new empty one. But I had previously done a partition copy of the original 10.10, complete with /home to a spare HDD so now I can copy that /home in place of the new empty /home. What's the best way to do that? Should I use 'dd'? Should I use Nautilus? Or should I partition-copy that copy of the 10.10 onto available space on the thinkpad 11.04, then manipulate the partitions to consolidate? Maybe create a separate /home partition?
View 4 Replies
View Related
Dec 6, 2009
As subject; none of my fedora machines appear in Windows' > Entire Network.I have installed SAMBA and started it; edited the config file:-
Code:
[global]
printing = cups
[code]....
View 3 Replies
View Related
Feb 15, 2011
I currently have Fedora running on it's own hard drive and I have two other drives in the same workstation I want to setup as Raid 0. Is this possible and what tool can I use to accomplish this? I have a feeling I might have to reinstall the entire system to accomplish this ...
View 2 Replies
View Related
