Seven times I was downloading the fedora11 disc1 i386 iso and the sha256 checksum was bad. When I try ftp.belnet.be mirror I can get the correct checksum. I understand the copy process between mirrors probably was errors. Becarefull friends. This bad iso aborts the installation process.
View 4 RepliesI am about to try Fedora 12. I noticed that most of the mirrors listed for this in lq have 2 isos. The first download listed has 4 - Live, Live 2, Live KDE, Live KDE 2. If I choose to use gnome instead of KDE, can I just burn and install the first two?
View 3 Replies View RelatedI have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View RelatedI'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies View RelatedI`m having a problem with upgrading my Fedora 11 to either Fedora 12 or Fedora 13. When i start preupgrade, it lists all packages that need to be upgraded, but then it ends with the message that none of the mirrors can be found. I`m seeing the messages in the console, and indeed all the mirrors return "HTTP Error 404: Not Found". Any idea how to change this and eventually do an upgrade?. I also downloaded the Fedora 13 DVD, and tried to upgrade that way, but it never showed me the window which must give me the option to upgrade instead of doing a fresh install. The explanation in the official website clearly shows that this window exist, but after several tries with the DVD I did not get it.
View 1 Replies View Relatedis there anyone who checked your downloaded file against the provided key? i have successfully downloaded the Fedora-12-i386-DVD.iso several times, but the SHA1 is not the one in Fedora-12-i386-CHECKSUM is there anyone who has the same problem? the SHA1 i calculated is: 0dc8ed436f0b44874454a379e8de5ad057c0115d
[Code]...
i've downloaded this image from 3 different sources. checksums are verified. DVD image write errors out on Packagesus-pinyin-1.2.020090915-1.fc12.noarch.rpm has happened on 5 DVD writes so far has happened with Fedora-12-x86_64-DVD.iso also but on a different file. DVD writer can write other images no problem.
View 7 Replies View Relateddownloaded the install dvd mounted it and ran it but I am getting an error line 55 of the kickstart file: section does not end with %%end install exited abnormally.
View 3 Replies View RelatedInstalling f10 on an x86_64 platform from CD or netinst. I can't seem to find a way to have it install i386 compatible (32-bit) software at the same time. Is there a repo that has to be enabled? In f8 i think it was just a box to click somewhere.
View 13 Replies View RelatedI would like to try out fc10 on an old, k6-2 pc. Last night I tried to download the dvd, but firefox 'completed' the download with only 1.2/~3xg, and of course it didn't work.
I am trying a test net installation in VirtualBox, so far so good.
However, I would rather have a more complete installation on hand and I'm looking at the full install cd's --there are 6 of them.
[url]
Are all 6 required for a minimal install, or could I get by with one (or two, etc)? For example, with debian installation cds you can use just the first one -- the rest are just a complete set of packages for everything +kitchen sink.
I need to install it on laptop along with linux, which of the two files should i download and burn?
View 1 Replies View RelatedI have VISTA home installed in my HP DV5 laptop and I have installed MS Virtual PC. When I try to install Fedora 11 i386 get stop at "SMP alternatives: switching to UP code" and won't proceed.But I installed Fedora 11 i386 in my desktop using same steps it work fine.
View 2 Replies View RelatedI'm currently using FC 9 - 2.6.27 x86_64. (In my Hp - nx6320 laptop with- Intel centrino Duo processor). I have downloaded linux-2.6.30.2. How do I install this with i386/i686 configuration set. All that I want is a 32 bit - linux-2.6.30, because NCTUns 5.0 works only with the 32-bit kernel. I have tried following:
Code:
make ARCH=i386 menuconfig
After this, I see the architecture set to "X86_32 = Y" in the .config file. But later, after I run
Code:
make bzImage
The configuration restarts asking to select Y/N for various packages and modules. I have no much idea on what to select and what not to, in order to retain X86_32 set. I end up with the new .config file with contents as below after the make bzImage command.
Code:
#X86_32 is not set
X86_64 = y
Again it is going to be built as a X86_64 bit kernel.
How to install the kernel as 32-bit along with the existing FC-9 64 bit kernel.
I presently have Fedora 12 running on a Dell Optiplex with a Pentium 4 CPU. I want to buy a new computer, probably from Dell, I don't completely understand the options I have available for which Fedora 13 will run.I more or less understand what 64 bit means since I also have an HP with an AMD 64 bit processor. But are there other options which will allow me to exceed the i386 memory limit? How about dual processors?
I used to understand CPU architecture pretty well, but i've lost track of more recent developments. Can anyone recommend a primer of CPU types, including assoicated memory limits? Similarly, I would like to be sure that Fedora 13 will run on whatever machine I decide to get. So a list of available processors, which are equivalent to which, and which Fedora 13 has been tested on,
Is there a live booter iso of Fedora 14 for i386 architecture?
View 3 Replies View RelatedI recently installed Fedora 14 on an old computer which was already a dual boot Windows XP/Ubuntu machine. As there weren't many problems I felt encouraged to install it on a newer dual boot (Windows 7/Ubuntu 10.10) machine. Apart from a lot of bother with the wiFi card, all appeared to be well. However, I decided to boot into Ubuntu to make sure that it worked as before and was disagreeably surprised to get a message saying that Ubuntu only had 12.5 Mb disc space left when previously it was installed on an 80 Gb hard drive.
I have had a look at the drive, using gparted and found that there are two ext4 file systems, one on /dev/sdb1 and one on /dev/sdb3 which have used 2.93 Gb and 500 mb respectively. /dev/sdb4 has an exclamation mark (!) beside it and is lvm2 and occupies 68.15 Gb and appears to be unused.
Would it be possible to shrink this lvm2 file system and expand the one that contains Ubuntu. If so, how can I identify where Ubuntu is located? there is also /dev/sdb2 which is an extended partition of 2.93 Gb as well as /dev/sdb5 which is a Linux swap of 2.93 Gb
I was reading the fedora Disk requirements and it said you need 9 GB of disc space. Which partition should this 9 GB of space be on? I plan on having a / root partition, /home partition, a swap partition, and a /boot partition.
Quote: 1.2.3. Hard disk space requirements for all architectures The complete packages can occupy over 9 GB of disk space. Final size is entirely determined by the installing spin and the packages selected during installation. Additional disk space is required during installation to support the installation environment. This additional disk space corresponds to the size of /Fedora/base/stage2.img (on Installation Disc 1) plus the size of the files in /var/lib/rpm on the installed system.
In practical terms, additional space requirements may range from as little as 90 MiB for a minimal installation to as much as an additional 175 MiB for a larger installation. Additional space is also required for any user data, and at least 5% free space should be maintained for proper system operation. [URL]
I am new to Linux and so am trying different distros. I have ubuntu which runs ok and installed fedora 9 from a disc on Linux Format magazine which runs ok. However I have tried to upgrade to Fedora 10 from a disc but the pc fails to find the disc. It is the same drive I used approx 6 weeks ago to install Fedora 9 so I am at a loss.
View 6 Replies View RelatedSomehow the install iso disc won't go into upgrade mode. My f10 is on the hard disk, but needing to be rescued. I would do f11 upgrade; but can't get the disk to do an upgrade. It only wants to install.
Checksum was good, etc. iso is fine. Is there a log file or something which it keeps getting hung up on, thinking it's supposed to install instead of upgrade which I could change or delete?
I have a pc trying to install fedora. It is an amd downloaded and tried to install different versions of fedora. The latest i686 and will get to a boot screen and when selecting boot will lock up at the i386 start kernal command and blinky curser. Yes I am new to linux and may need some hand holding. I have however successfully installed fedora on other computers a while back which is why I am not sure what is going on. It may be a hardware mismatch. I will try to see if I can find another computer to install. I used a different computer and is working. The athlon computer is not working.
View 5 Replies View RelatedI386 install dvd, gets to the point where it needs to resolve packages and then anaconda crashes. http://jaojbre.users.sbb.rs/anacdump.txt contains detailed log file. Any idea?
View 1 Replies View RelatedWhen installing FC 11 after a few questions about language I got:
"The Fedora disc was not found in any of your CDROM drives ...."
I read a couple of the threads on the problem and it seemed people were shooting in the dark for answers. Two issues mentioned were SCSI and DMA problems. If I go into the bios and disable the DMA or SCSI driver, and then I re-enable them after installing Fedora, will Fedora see the DMA or SCSI? Or will the fact that they were disables during installation keep Fedora from recognizing them later?
I downloaded the 7 isos and burned them to CD properly, but I can't seem to get my Powerbook to startup from CD 1. I've held down "c" while starting up just like usual, but it's not recognizing the CD as a startup disc. It simply goes into OSX or OS9. I'm a Linux novice, unfortunately.
View 1 Replies View Relatedam running fc10 and windows xp on my laptop.As usual my windows got crashed.When i inserted windows xp cd, the system is not booting from disc properly. It shows inspecting systems hardware and then turns into a blank screen.
View 2 Replies View RelatedIs this irrelevant if you are using the kde install disc? I want to use a encrypted filesystem. I would think since I am using kde that I would have a graphical interface.
View 10 Replies View RelatedWhen I try and use yum as a normal user i get: Error: failure: repodata/primary.xml.gz from adobe-linux-i386: [Errno 256] No more mirrors to try. If I do this as root it works fine. What am I missing?
View 4 Replies View RelatedI am having a problem with installing mysql and mysql-workbench. I installed a group of packages related to mysql on my system and it seemed to work fine. Due to an error in my setup, I decided to uninstall all the mysql packages and start from scratch. On my second try, I was able to load all he packages except mysql-workbench
I get the following error from the Add/Remove software application. workbench-5.2.30-1.fc14.i686: failure: mysql-workbench-5.2.30-1.fc14.i686.rpm from updates: [Errno 256] No more mirrors to try. why I can not get the package again to install?
In Fedora 15 fresh installation, yum update does not work. During package download, it throws the message "no mirrors to try". Yum repolist is below:
Loaded plugins: langpacks, presto, refresh-packagekit
updates/metalink | 7.1 kB 00:00
updates | 4.7 kB 00:00
updates/primary_db | 2.9 MB 00:03
updates/group | 1.8 MB 00:02
virtualbox | 951 B 00:00
virtualbox/primary | 2.0 kB 00:00
virtualbox 2/2
repo id repo name status
updates Fedora 15 - x86_64 - Updates 4,108
virtualbox Fedora 15 - x86_64 - VirtualBox 2
repolist: 4,110
How to be sure that my yum is working? I think its not working as: if I enter on terminal I find the error: Code: yum install yumex many lines saying trying other mirror and then at the last line: Code: python-enum-0.4.3-6.fc12.noarch: failure: Packages/python-enum-0.4.3-6.fc12.noarch.rpm from fedora: [Errno 256] No more mirrors to try.
View 2 Replies View RelatedSearching for an ancient file... "ubuntu-8.04-src-1.iso" Note that I have already checked the primary ubuntu mirrors that host DVDs. they all have: "ubuntu-9.04-src-1.iso"/"ubuntu-10.04-src-1.iso"/"ubuntu-11.04-src-1.iso"; but not "ubuntu-8.04-src-1.iso"... I am trying to organize an internal "complete" archive for computer science and engineering at the Univ of Mich.
View 8 Replies View Related