Ubuntu :: "Erase And Use The Entire Disc" Option - 9.10 Installation
Jan 2, 2010
Maybe it's because I love trying something new, or because I love tinkering, but I'm thinking about ditching the dual-boot and going 100% Ubuntu.
I noticed the "Erase and use the entire disc" option during the 9.10 installation, but I instead did a dual-boot.
Here's a screenshot from Softpedia:
So here are my questions:
1) Is there any info (aside from my documents) from Windows I should get before I do this?
2) Will this erase my entire drive (i.e. all partitions)? My HDD has a few partitions and I'd like it to be completely erased and replaced with 100% Ubuntu
3) Will the GRUB loader still be there at startup or will it just go straight to Ubuntu?
I got an ubiquity error when installing using erase entire disk option.Install just hangs after this error. I have an oldish p4 pc, 40 gb hard drive with faulty windows xp installed on it.
I recently installed Fedora 14 on an old computer which was already a dual boot Windows XP/Ubuntu machine. As there weren't many problems I felt encouraged to install it on a newer dual boot (Windows 7/Ubuntu 10.10) machine. Apart from a lot of bother with the wiFi card, all appeared to be well. However, I decided to boot into Ubuntu to make sure that it worked as before and was disagreeably surprised to get a message saying that Ubuntu only had 12.5 Mb disc space left when previously it was installed on an 80 Gb hard drive.
I have had a look at the drive, using gparted and found that there are two ext4 file systems, one on /dev/sdb1 and one on /dev/sdb3 which have used 2.93 Gb and 500 mb respectively. /dev/sdb4 has an exclamation mark (!) beside it and is lvm2 and occupies 68.15 Gb and appears to be unused.
Would it be possible to shrink this lvm2 file system and expand the one that contains Ubuntu. If so, how can I identify where Ubuntu is located? there is also /dev/sdb2 which is an extended partition of 2.93 Gb as well as /dev/sdb5 which is a Linux swap of 2.93 Gb
I have just got a new Compaq/HP netbook with Windows 7, and I have downloaded Ubuntu 10.10 (using my main Ubuntu system) and put it on a USB stick to load it "alongside" Windows.
At install phase on the new machine there is no option shown to add Ubuntu alongside Windows; only two options are shown, to erase the disk entirely and load Ubuntu, or the advanced option to select the disk partitioning manually.
I don't want to do either of these!
What happened to the third option, share the disk between operating systems?
I have used Linux for years, and don't want Windows, but it is safer to be able to boot up Windows for some things (testing ADSL line for Orange France, for instance).
A while ago I messed up my Ubuntu installation so I decided to boot the install from the disc again and overwrite it. It turns out the installation disc does not give you the option to replace a current Ubuntu installation so I was forced to take more space out of my windows [vista] installation. This means I now have 1 ruined Lucid Ubuntu OS, 1 Working Lucid Ubuntu OS and a windows Vista OS system. Is it safe to delete my ruined Ubuntu from inside vista? Is it possible to overwrite my Ubuntu installations? How can I delete them both and then install Lucid again?
I want to know this now as Maverick Meerkat will be released on Sunday and I want to install that in a clean installation without deleting my vista installation. I do not have the Vista installation disc because Vista came pre-installed. I am not willing to buy anything.
During the ubuntu installation I am most afraid by this question. If I select to "erase and use entire hard disk "
what will happen. For example I have 20 gb Hard disk divided in 4 logical drives 5 GB each. Whole 20 gb data will be arased, or Data on one of those 4 drives will be erased.
I resarted it and put in the disc and held the option/alt key. It came up with the options Macintosh HD then a few seconds later it had a CD images and said "Windows" i laughed then went to it It started with a black screen the said ISO linux then a name and went to a flashing under score thing then the white flashing underscore disapeared... Then it was just a black screen. I waited for mabye 2 or 3 minutes then held my power button and shut down and tried agian same thing happend but this time after the underscore my computer just shutdown. Im trying to RUN (not install....yet) on my macbook from a CD-r CD...in disc utility it said it burn successfully.
Ubuntu 10.04 has just failed to load from my hard drive, so I've resorted to booting from CD just to get the machine going.I'm wondering if my main boot drive has gone caput??When trying to mount it using DISK UTILITY...get the message: Error mounting volume
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,missing codepage or helper program, or other error.In some cases useful info is found in syslog - try dmesg | tail or so
I am using Suse 11.4, with the Gnome desktop. I have downloaded the VLC player, but cannot work out how to make it play CDs in the CD drive. Right clicking on the Audio Disc icon that appears on the desktop whenever I load a disc doesn't give me an option to Play using VLC. Is there a way to make VLC the default player for CDs?
I have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
I installed ubuntu from the live cd,and I have xp on here to so I can boot on either one at startup.Now I want to get rid of the xp partition and just have one big ubuntu partition.
Using FC12 as a basis vor Amahi and started to use it more and more from that point. Started to Linux some time ago and am using Debian and its variants mostly. Som experience with Yum is scarce at the moment.Ran into problems with old transactions not finished and did what was advised: <g> checking for problems. That solved it. Great. So I decided to look into Yum options a little more.
So I told YUM to ERASE it. Shock and horror after a long wait and a looong list of packages being set to be erased it offered to erase 1208 packages!! Of course I denied politely first. There are lot of base-packages in that list, am I about to run the complete current setup? Leaving me in an unbootable / unusable state?
I would like to completely erase my hard drive and install Ubuntu 10.04 on again fresh. I think some files have become corrupted from a power cut that I had last night whilst the laptop was plugged in (and turned on).
I'm not bothered about completely wiping the hard drive since there are no important files on it (at most there are just a lot of packages I downloaded from the repro...) I don't have any Windows installations either - it's just a simple; wipe the hard drive and reinstall all over again case
I will be installing Natty using the alternative CD.My system has a separate Home partition.Do I need to erase the contents of the Root and Home partition with gparted or similar,prior to the fresh installation of Natty or will the installer take care of all that automatically?
when I go to download 11.3 I am presented with the installation medium for a DVD installation with a button that says download DVD. Should there be an option to download an ISO option for a CD installation on this page along with the DVD version? Some of our older machines can only read CD's with a max size of 500+ megs.
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap sda2 - / sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
I'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
I have installed win7 and Ubuntu on acer emachines E430. Had some problems with boot but have fixed those with help from here.The problem I didn't see is that when I am in Windows file manager only show half of hdd. I can see the entire one in ubuntu.I dont even see Ubuntu through win. But through Ubuntu I can see win folder.
I have installed a number of softwares on my system,and well a recent power surge costed me my system with all those softwares,SO is there a way for me to sort of compress or make a live disk of my installation including all the softwares,so even in case of a hard disk replacement,i ay not lose my system.
I am trying to install Ubuntu 9.10 on my Fujitsu-siemens notebook but cannot see the entire installation screen - the bottom and right side of the screen seems to extend beyond the viewable area so I cannot see the 'next' buttons. I haven't seen any 'safe mode' installation options.
The last time I attempted to install an alpha release, my entire hard drive was wiped out (it was backed up) because of my ignorance to the installation warnings. Would it be possible upgrade Maverick Meerkat to Natty without editing any partitions?
I was relieved to read online that I'm not the only first-time Ubuntu user to destroy their system beyond repair and wish to uninstall and reinstall Ubuntu. However, all the tutorials I can find on how to do it are for users who have a dual operating system on their computer, especially XP and Vista. Ubuntu is my sole operating system (I decided to give it a try when my computer crashed and needed to be rebooted with a new operating system).
Is there a way to just remove my entire Ubuntu operating system from my laptop and reinstall it? I've already downloaded Ubuntu onto my jump drive and it's all set to reinstall. Tutorials claim that restarting my laptop with the jump drive inserted in my laptop will automatically startup the Ubuntu installation process but it doesn't, and I'm sure it's because I still have Ubuntu on my laptop.
Stats: Gateway NV52 Formerly Windows Vista, but that was removed and Ubuntu (Linux) is now the sole operating system Gnome Ubuntu 10.04 LTS
I installed a new 11.04 on my Thinkpad in place of the old 10.10 system, so it replaced the old /home with a new empty one. But I had previously done a partition copy of the original 10.10, complete with /home to a spare HDD so now I can copy that /home in place of the new empty /home. What's the best way to do that? Should I use 'dd'? Should I use Nautilus? Or should I partition-copy that copy of the 10.10 onto available space on the thinkpad 11.04, then manipulate the partitions to consolidate? Maybe create a separate /home partition?
I am trying to install ubuntu 9.10 alongside windows on my laptop's harddrive. When I was going through the procedure it gave me the option of a guided partition of my harddrive... however there was an error. At this stage I unplugged my external harddrive because it's sometimess a bit dodgy and restarted the installation process. However everytime since that I have tried to install, it only gives me the option of erasing the entire disk or specifying the partitions manually
I am doing a fresh install of Ubuntu 10.4 and I cant install, when it says Ubuntu in the loading screen after a while the entire sceen becomes distorted, like all messed up and I cant seem to do anything, I am running Opteron 175, DFI Expert Motherboard and Nvidia 7800GT.I am attaching a picture of what i am getting
Does anybody know how to or even if it's possible to create an ISO image (a snapshot, if you will) of an entire volume on a Linux box so that I can use that ISO to burn to a CD use in the future for creating an identical configuation on another box (which would have the same exact hardware)? It is to my understanding that I'd have to first create the ISO file of the entire system and then burn it to a CD and somehow mount it onto the hard drive of the identical-system-to-be.
I'm thinking that I'd have to use the "mkisofs" command but I'm not sure exactly how to do this. P.S. I do not want to use any 3rd party applications.
No matter how I try, or how many sources I go to, every instance of open office gives me an error message saying that the JRE (Java) file is corrupt. I cannot find an instance of Open Office I can download regardless of the version. I have no Open Office now. How can I find a version that will give me the entire package AND install? I've had a lot of trouble getting any version to install...but that may be due to the corruption of the JRE file
