Skype doesn't recognise my plugged in mic and earphones. I can hear sound through the headphones from other programs. DVD burner burnt a cd for me, but seemed to pause at around 15-20% and sat there for half an hour. When I ejected CD it jumped to 100% stating it had finished. The CD was a Live Install CD for Ubuntu, which didn't work. I get I/O errors when trying to install from CD on start up. I'm guessing it didn't burn properly or isn't being read properly. I'm generally unsure of what drivers are installed for all of my hardware. Not sure if there is an auto-detection program in or for Fedora that can help, or if I will have to stop being lazy. Skype, like mentioned before. I'm not sure if this is a software issue or driver issue.
Mozilla failing to open. When clicking on the Firefox icon it wouldn't start. Shows an icon at bottom of monitor on toolbar, but disappears after 5-10 seconds with no browser opening. I had recently installed a VLC player with plugin for Mozilla while logged in as root. Wondering if I messed this one up myself? I stumbled onto updates and it had Mozilla install in there. It works again. I'm sure it won't be reoccurrent. If I were to post system specs and issues I'm having, would someone on this forum be willing to guide me through or point me in the direction of having my laptop fully operational? All drivers basically. It works as is, just not completely
When I go to Administration->Preferences->Appearance, the window pops up for a split second and is then gone. Attempting to open it again yields the same result. I have never had this issue before and haven't changed anything recently that I recall.
I have been doing periodic net-based dist upgrade since 7.10. Currently I use 9.10. Now that 10.04 is out, I want to upgrade to the latest LTS version by doing a clean install, instead of using net-based dist-upgrade.
Since I use Firefox, and Thunderbird, I want to keep the passwords/bookmarks I have stored in firefox, and mail/account settings (for multiple email accounts) that are in Thunderbird.
While I know I can copy the hidden profile directories for each, and back them up for recovery after the upgrade by copying them into the new 10.04 after install is complete, I don't know if this is recommended, prudent, or if pitfalls await me. Since I want to do a clean install, and, since 10.04 uses different versions of both Thunderbird and Firefox,
1. Would it be prudent to back up/use the existing profiles I have in 9.10, or should I bite the bullet and just start fresh with new profile setups when I finish installing 10.04? 2. Are there any pitfalls I need to be aware of if I will be restoring a profile of each from 9.10?
3. Or, should I continue to do net-based dist-upgrades to 10.04 so appropriate profile changes can be made by the new versions of Thunderbird/Firefox software?
I 've just installed it, now i would like to install the flash plugin for mozilla. so i did download the flashplayer after i open the command shell and type:
I don't know what I have done, but usually, when you want to download something from the internet, you click on the download icon and mozilla opens a small windows with 2 options. Open of Save file. Well, it's not working here anymore, I will attach what I get when I try downloading something. Is there anyway I can get all default settings from mozilla back? (I will attach my download settings too)
I've tried to upgrade my FC8 on Presario F700 series laptop to FC 10 and facing some issues. I've a live CD (i386). Initially i tried upgrading FC 8 to FC 10 and installation was stuck around 30% completion saying its unable to fins libdbi-0.8.3-1.fc9.i386.rpm. Then I tried to install FC 10 from scratch as system went to inconsistent state and faced two issues with two different setup options -
1) when i selected necessary software to be installed for office use and development, it failed after installing 20% saying libgnomeui-devel-2.24.0-2.fc10.i386.rpm
2) i then opted for for software to be installed for office use (default option) then it failed after installing around 50% saying libXrandr-1.2.3-1.fc10.i386.rpm
im trying to understand if this is a problem due to my laptop configuration (AMD Athlon 64 X2 Duel Core) or due to issue with the live CD.
I've burned the installation media on several different types of media, and i'm getting an error after the 3 bars load (first screen). I've tried the verify and boot option, and it's fine. I'm trying Fedora 10 on a studio xps 1340. The error messageet isCE hpet increasing min_delta_ns to xxxxx nsec twice, thenForce XPAon: 0about 15 times, thenCE hpet increasing min_delta_ns to xxxxx nsec a few more times, this pattern alternates and the xxxxx keeps increasing, starting at something like 10000 and jumping by 50000 each time it reposts.
Is it safe to put my old .mozilla and .mozilla-thunderbird folders from xandros 4.2 into OSS 11.3? I have apps, emails, and settings that I would like to keep. This might seem like an over precautious question, but I've broken Xandros more than once. I would hate to do it to OSS.
I installed Fedora 10 on an 8 GB USB-stick using the creator-software for windows. Sadly I am not so familiar with linux but as I am now trying Fedora on a friend's advice I really start to like it
Unfortunatels there ist a problem: I wanted to compile a driver for my wlan-card but got the known error "make: command not found". So I searched this forum and found in this thread that I need to install the development tools. But when I try to do so by typing yum groupinstall "Development Tools" it first starts but then cancels with an error message claiming missing dependencies to a perl package:
Quote:
Fehler: Fehlende Abh�ngigkeit: perl = 4:5.10.0-49.fc10 wird ben�tigt von Paket 1erl-Pod-Escapes-1.04-49.fc10.i386 (installed)
Due to my ignorance I tried yum install perl but this also fails with the same error message I am sure it is just a bite for you but I don't hava a clue right now By the way I already can call the command make install now for the wlan-card driver. It also starts but fails and says:
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start then this $ /etc/init.d/httpd graceful
i was using ubuntu 9.10 installed as a program inside windows. i clicked the upgrade button in my update manager and the ubuntu upgraded to 10.04. Now i couldnt access net from mozilla. my updates are still working and i can download those. when i type the address in mozilla and press enter it says connecting and then says to check my network settings. this is the case in both my acer laptop and my desktop
im just recently in to linux world and the first thing i did is to familiarize my self to the environment of linux and then and structure of file system. I run F10 in virtualbox. and setting it to bridge mode.
after that i began configure my network in linux. as default i connect to the internet. enable NetworkManager and dhcp on(auto detect ip).
then i began to manually configure it.
enable eth0 and insert the necessary ip i found in ifconfig then active eth0 then restart /etc/init.d/network
then i still dont have internet.. then i read that i need to disable my NetworkManager, so i do that.. and it works.
BUT one day later . cant connect to the internet.. so i redo my configuration. and to check if i have internet connection i ping outside ip like our external DNS, public site, localhost etc.. and i can ping all of them but when i use mozilla i cant browse any site..
i have to run some html, perl, php programs on my fedora.. but itseems i have a localhost problem .. not abe to run any pgms on localhost in Mozilla..? how do i resolve this? (i run usually as [URL] usually in fedora 6 or previous versions this works .. but m not able to figure out how to do in newer versions ..
I just downloaded the Mozilla Firefox Beta 4 package which if of the extension .tar.bz2. I currently have Mozill Firefox 3.6 installed on my laptop. Can anyone guide me how to install Mozilla Firefox Beta 4?
I think I've found a problem in Firefox 3.5 in Fedora 11, don't know if this may be also the case for other distributions. So, the problem I currently have is that other user accounts on the system cannot access correctly the fonts from Mozilla based browsers (Firefox, Epiphany, Galeon, SeaMonkey), the problem is that at many websites the browser simply won't display any fonts at all, all the text is "blank", it IS there, but as if the characters were transparent, they aren't drawn. Besides this problem, Firefox (or Epiphany, or any of the others) will eat up as much as 80% of all the RAM (and in this 4Gb setup, that is simply too much for the browser alone!), not to mention that performance is awefully degraded while the HDD is spinning like mad and the browser is loading whatever it may be.
However, my primary account is unaffected (reason why I thought it may be related to privileges). I need this system to be multiuser. Looking around I don't seem to see any signs of this issue, I have no idea why is this the case. The only way to get the other browsers to display any fonts at all is to force the desired fonts to use (not allowing the websites to be viewed as intended by the authors).
Any hints as to why is this so? BTW, in the main account I have the option for the websites to choose the font enabled, and no font drawing problems whatsoever.
Mozilla programs are not connecting to the network. All other networking programs are working: yum, wget, skype, opera, nslookup, etc. Firefox and Thunderbird are not able to connect to the network. What happened? My box was working fine earlier! All I can figure is something included in the yum update that I performed today.
http://www.theinquirer.net/inquirer/...leases-firefoxYawn, didn't they just release FF5 a few days ago? Yes, I know when it was released, just being sarcastic!
I'm new to linux I love it. I want to open oracle forms 10g in my mozilla which was default in Red Hat Enterprise Linux Server release 5 (Tikanga) ( I'm using). When I tried to open, getting error mess "Install missing plugins". I tried to install plugins manually but no use. Some one said I need to change the "pluginreg.dat" file. But I didn't find that file " /usr/lib/mozilla/plugins " to change.
Setup: Ubuntu 10.04 (Fresh Clean Install) AMD64 Desktop - Using Firefox 3.6.9 with Flash Player Plugin
Problem: I can watch videos but cannot interface with the plugin. I.E. I cannot change volume, fullscreen, progress bar adjust, etc.
After researching for many How To's and install scripts I finally came across one that worked for my particular setup:
I got the script from the following link:
This installed successfully and I can watch videos but cannot interface with the plugin. I.E. I cannot change volume, fullscreen, progress bar adjust, etc.
I read that changes are in progress to update the 64 bit Flash Plugin for Mozilla, could this be a bug people have reported?
I have Fedora 12 installed: 2.6.31.6-166.fc12.x86_64 Firefox version : Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.6) Gecko/20091216 Fedora/3.5.6-1.fc12 Firefox/3.5.6
I have installed the flash-plugin using yum. Restarted firefox but still not able to play ..... videos.
[root@saurav tonan]# yum install flash-plugin Loaded plugins: download only, presto, refresh-packagekit Setting up Install Process Package flash-plugin-10.0.42.34-release.i386 already installed and latest version Nothing to do
But I am not able to see it in the plugins list, when I goto Tool >> add-ons >> plugins. I tried about login in the browser address bar, got the list, but its a lot of details, which one would tell me that the adobe flash player is installed. Later I downloaded the tar file and unzipped it and manually placed the .so file in the plugin folder as mentioned in the forums, but no luck.
