Slackware :: KSpread Failing To Open Files In -current?
Jan 26, 2010Finding that KSpread is failing to open files in Slackware-current since updates
I am having problems in both my Slackware64 and Slackware32 installs.
ADVERTISEMENT
Slackware :: Amarok On Current 64 - Won't Play M4a Files
Feb 12, 2011Amarok won't play m4a files for me even though they play fine with Juk, ffplay, moc, Audacious, etc. Up to date current 64. Any thoughts? I can find no option to turn aac on or off in Amarok.
Code:
Fedora :: Appearance Failing To Open?
Feb 21, 2010When I go to Administration->Preferences->Appearance, the window pops up for a split second and is then gone. Attempting to open it again yields the same result. I have never had this issue before and haven't changed anything recently that I recall.
View 8 Replies View RelatedFedora Installation :: Mozilla Failing To Open
Sep 1, 2009Skype doesn't recognise my plugged in mic and earphones. I can hear sound through the headphones from other programs. DVD burner burnt a cd for me, but seemed to pause at around 15-20% and sat there for half an hour. When I ejected CD it jumped to 100% stating it had finished. The CD was a Live Install CD for Ubuntu, which didn't work. I get I/O errors when trying to install from CD on start up. I'm guessing it didn't burn properly or isn't being read properly. I'm generally unsure of what drivers are installed for all of my hardware. Not sure if there is an auto-detection program in or for Fedora that can help, or if I will have to stop being lazy. Skype, like mentioned before. I'm not sure if this is a software issue or driver issue.
Mozilla failing to open. When clicking on the Firefox icon it wouldn't start. Shows an icon at bottom of monitor on toolbar, but disappears after 5-10 seconds with no browser opening. I had recently installed a VLC player with plugin for Mozilla while logged in as root. Wondering if I messed this one up myself? I stumbled onto updates and it had Mozilla install in there. It works again. I'm sure it won't be reoccurrent. If I were to post system specs and issues I'm having, would someone on this forum be willing to guide me through or point me in the direction of having my laptop fully operational? All drivers basically. It works as is, just not completely
Slackware :: Lost Wireless Keybord And Mouse Upgrading Slackware Current
Oct 24, 2010Lost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View RelatedSlackware :: Alfa Awus036h Slackware Current Dhcpcd Won't Connect
Feb 5, 2011slackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
Slackware :: Image / Icon Trouble After Slackware-current Upgrade
Jan 22, 2010I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies View RelatedSlackware :: Slackware Current Installpkg Line 59 Rev Command Not Found
Feb 28, 2011First time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
Slackware :: Slackware Current 64 Bit Wine Sound - Error: Alsa:ALSA_CheckSetVolume Could Not Find '{PCM,Line} Playback Volume' Element
Mar 22, 2011after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
Slackware :: Can't Boot Updated Kernel Slackware Current
Jan 5, 2010I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedSlackware :: Graphics Not Loading After Upgrading To Slackware-Current
Feb 26, 2011I've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies View RelatedSlackware :: How Should Proprietary ATI Driver Be Installed On Slackware Current 64-bit?
May 15, 2010I've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies View RelatedSlackware :: Unable To Excludes.txt And Mirror-slackware-current.sh
Feb 1, 2011I use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
Slackware :: Slackware Current Freezes At Splash Screen / Fix It?
Mar 16, 2011I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies View RelatedSlackware :: Floppy Boot Failing
Mar 13, 2010I have an external 500gb usb drive with a bootable full install of slackware 12.2, and it also contains all the sets, patches, and extras for 12.2 in /usr/src, along with some other non slackware packages, like gparted, and I use it for rescue, backup, installation, etc.I used this disk with no errors, setting up 12.2 on my mother's dell, a pentium 4.However, my mom has an older gateway as well (a pentium 2) that she keeps around because it has M$ Publisher on it, and sometimes a student emails her a Publisher document, and she has to use her old sluggish beast to open it up.
I have not found an open source solution to open Publisher docs in Linux, so I have been trying to follow http://www.virtualbox.org/wiki/Migrate_Windows to migrate the her xp installation on her old box to a vdi to use with virtualbox.My first obstacle is that the cd drive in the old machine is non-functioning. My second obstacle is that her machine dates back to the days before the bios supported booting from usb.
I have never had the time to mess with network booting, and don't know how to set up a bootp server, so sticking with what I know, I thought I could install lilo on a floppy, and have it configured to boot my external usb. Originally, lilo was installed on the mbr of the usb, but for this project, I went ahead, using the pentium 4, and reinstalled the lilo boot loader on a floppy. I did this by mounting my external usb drive (which shows up as /dev/sda) and then binding /sys, /proc, and /dev to it, and chrooting into the external usb install. Then I modified lilo.conf and reran lilo. It worked, and now the external hard drive only boots on the pentium 4 when I have the floppy inserted into /dev/fd0. However, when I plug the external drive into the pentium 2's usb, and insert the floppy and try to boot, it never makes it to the lilo prompt, and just displays 10 lines of L 07 07 07 07 07 07 07 07 07..The boot order is correctly set in bios to try the floppy first. I thought I might have problems with the smp kernel on such an old system, and thought I might have to go back to huge.s, but I'm not even making it to the prompt...
Slackware :: Sounds Failing For Some Apps But Not Others
Dec 3, 2010Sound card: VIA VT1828S (on-board)
Slackware 13.1 (occurs in 32bit and 64bit)
kernel "2.6.33.4 #2 SMP Tue Sep 21 17:28:38 CDT 2010 x86_64"
Video card also has HDMI port + thus has shows as another sound device (ATI HD5670)
Symptom: My audio in Amarok randomly fails.
Ok, it's not exactly random. I'll play a few dozen songs just fine. I'll pause/stop, then try to unpause or play another song later on - no sound.
If I go to the amarok settings, and "configure phenom", it shows "VIA VT1828S" - I click test, and it says the VIA VT1828S has failed.
However, I can still use 'play' from the command line. I still get sound in certain other apps (flash player / firefox).
Code:
SUSE :: Failing To Load The Gnome Session - GTK Warning - Cannot Open Display
Apr 27, 2010I am using SLES 10 SP3(x86_64). I was trying to install gtk/wxwidget through yast.
After that i rebooted my system, now system is failing to load in GUI mode.
If i can give the log of last few lines are as follows
Then it asks for login, only shell is available for me. How to login to gui mode..
I tried using the command gnome-session it gives error (gnome-session: 4101): Gtk-Warning **: cannot open display:
Also i tried using init 5, but again it prompts the my servername.
Slackware :: Chatzilla Add-on In Seamonkey In Slackware-current?
Mar 22, 2011This is not an earth-shattering issue, but, something I've recently noticed with the Chatzilla add-on for Seamonkey in Slackware-current. Maybe it is just my problem.If I add Chatzilla to FF 4.0 everything works as expected, that is, when I launch Chatzilla the default start-up window shows up with a list of IRC servers to click on (freenode being my favourite).
However,when I click on Chatzilla in Seamonkey I get a blank window that shows up, there is no server list. I noticed that the window in Chatzilla went blank for Seamonkey recently after a -current update (maybe a library issue?)
Slackware :: Building Mumble 1.2.2 On Slackware - Current 64?
Jan 10, 2011I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
Slackware :: How To Do A 'fresh Install' Using Slackware -current
Mar 25, 2011I wish to do a fresh install of Slackware without KDE. I could use my Slackware 13.1 DVD but I thought, why not give -current at try? Is there a -current ISO or must I install 13.1, without KDE, and then upgrade to -current? Or, is it possible to remove 'all things KDE' and then upgrade to -current?
View 8 Replies View RelatedSlackware :: Slackware Current KDE 4.5.5 Desktop Upside Down?
Feb 21, 2011i just updated my slackware to current, and every time i try to log in in my kde session my desktop is upside down.i mean literally everything is upside down, the only way i can have a usable desktop is with the "fail-safe session" of kde option on kdm which is what i'm using right now.does anybody know how can i solve this?i would post a snapshot of the upside down desktop but i can't do anything when i'm using it. fonts, windows, panels, icons everything is upside down..i solved this, just reinstalled the nvidia drivers and everything is goood again
View 1 Replies View RelatedSlackware :: X11 Mouse Frozen In Slackware-current?
Feb 25, 2011I'm running slackware-current in a virtual machine on virtualbox 4, 512 mb ram, 1gb swap.Everything works fine, except the x11 mouse. Xfce will start up fine, and show the 'tips and tricks' dialog, and then freeze. I can't change to a TTY, or click. The mouse moves, but doesn't click.
View 13 Replies View RelatedSlackware :: Auth_mysql 3.0.0.0 With 12.2 Failing To Validate User
Aug 30, 2010Slackware ver 12.2
Mysqld Ver 5.0.67
Apache/2.2.16
mod_auth_mysql-3.0.0 patched with apache22.diff
Symptom: when trying to use mod_auth_mysql to validate access to a directory via mysql DB, get prompted for user name and password but never find user and password combination despite using good values for login to mysql (same values in apache directory statements work as a cli login to mysql) and confirmed as valid in the user_info table (see values supplied to prompt in select * from user_info). Mysql general log does not show any attempt to access, strace does not show any attempt to setup local connection to mysql port. In a working version in Fedora I setup to test do see access described in the general log and strace shows a setup to mysql port. No useful messages in slackware apache access_log, error_log, mysql error logs, system logs.Have tried many combinations of mysqld variables, apache variables, mod_auth_mysql versions and variables, to no avail. Reinstalled apache, mysqld, etc.
Slackware :: Failing To SSH Between Boxes On Same Wireless Network
Feb 7, 2011I've got a Linksys WRT54G router with the latest firmware. I've got an HP laptop connecting wirelessly and my main box connecting wirelessly with a Linksys WMP54G card. (As an aside, I used to have another box too with the same wireless card). Both are set up with a static IP. Both can access the Internet just fine. The router is on the main floor. My main box is in the basement. Both boxes are running fully patched versions of Slackware64 13.1. sshd is running on both.
I like to ssh into the other box when there's a security update or to copy a file from one computer to the other, etc. The problem is that I can't do that all the time. Even if the laptop is connected to the network and accessing the Internet, on my main box ssh will still "say ssh: connect to host ***** port 22: No route to host". It is my understanding that if I ssh in, it is accessing the other computer directly and not going through the router. What would cause this? Even if I bring the laptop within four feet of my computer, it still can't connect.
There doesn't seem to be a rhyme or reason to when it will connect and when it wont. Sometimes I can access it just fine then about five minutes later I can't.
Slackware :: Exaile Failing To Start - Object Has No Attribute
Feb 26, 2011I wrestling with a new slackware install and I've got a problem with exaile. It was built with sbopkg, and doesn't work. It doesn't start at all from the menu (in Xfce,) and provides the following error message when started from Terminal:
Code:
INFO : Loading Exaile 0.3.2.0...
INFO : Loading settings...
Traceback (most recent call last):
File "/usr/lib64/exaile/exaile.py", line 52, in <module> main()
File "/usr/lib64/exaile/exaile.py", line 49, in main exaile = main.Exaile()
File "/usr/lib64/exaile/xl/main.py", line 96, in __init__self.__init()
File "/usr/lib64/exaile/xl/main.py", line 132, in __init self.__show_splash()
File "/usr/lib64/exaile/xl/main.py", line 260, in __show_splash import xlgui
File "/usr/lib64/exaile/xlgui/__init__.py", line 53, in <module> from xlgui import devices, guiutil, icons, preferences, queue
File "/usr/lib64/exaile/xlgui/devices.py", line 34, in <module> from xlgui import collection
File "/usr/lib64/exaile/xlgui/collection.py", line 36, in <module> from xlgui.widgets import dialogs
File "/usr/lib64/exaile/xlgui/widgets/dialogs.py", line 452, in <module> class MessageBar(gtk.InfoBar):
AttributeError: 'module' object has no attribute 'InfoBar'
Slackware :: VirtualBox Failing To Build Kernel Modules
Jan 10, 2010If others are have the problem of VirtualBox failing to build the kernel modules with kernel 2.6.32 try this :-
1. Install VirtualBox and watch as the kernel modules fail to compile.
2. Change the line
Code:
KFLAGS += -DRT_ARCH_AMD64
TO
Code:
KFLAGS += -DRT_ARCH_X86_64
In the following files :-
Code:
Line 231 /opt/VirtualBox/src/vboxdrv/Makefile
Line 170 /opt/VirtualBox/src/vboxnetadp/Makefile
Line 174 /opt/VirtualBox/src/vboxnetflt/Makefile
3. Run /etc/rc.d/rc.vboxdrv setup
You will now have a working VirtualBox setup. NB This is written purely from the standpoint of using the Closed source version of VB not the OSE version.
Ubuntu :: Open A Terminal Under The Current Directory?
Oct 10, 2010So for example, I go to PLACES -> DOWNLOADS and somehow open up a terminal for that rather than opening up a terminal to type "cd ~/Downloads" I know its simple to do that but when your dealing with some crazy directory like:
/media/2TB-DATA/BackUps/Regular/Downloads/Pictures/Family/Me/HiDef/ or something, and ur already browsing through it using the file browser, it would be nice to be able to open up a terminal for that directory.
Ubuntu Networking :: Extracting Files For Ndiswrap Failing
Feb 8, 2010is that my ar928x atheros wireless connection is severely slow. To fix it I've heard ndiswrap and so I've downloaded the XP driver from HP's support site (a pavilion dv7-1450us Notebook PC) and met a brick wall. The file is sp45222.exe and it contains seemingly no .bin .inf or .sys files that ndiswrap dearly requires. I've tried extracting it on a windows machine with UniExtract. This gives only three files one of which UniExtract can extract into a compilation of folders none of which have the required files. I've also attempted to use cabextract on my Ubuntubox, but not cabs come out. I have unshield, if that's relevant at all. What on Earth am I doing wrong?
View 3 Replies View RelatedHardware :: NTFS Drive Failing While Recovering Files
May 19, 2010I have an external drive that has been formatted as NTFS and I need to recover the files. For the most part, on windows, I can read the drive however When I'm copying, it interrupts with an I/O failure. Is there a way to copy the files from Linux and have it continue even if it has an error?
View 3 Replies View RelatedSlackware :: Take Current Windows7 (x64) Setup And Make It Into A Dual-boot Setup With Slackware 13.0?
Jan 24, 2010I'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
