Ubuntu Installation :: Acer Aspire Blank Screen?
Jun 12, 2011
I'm working through this issue with my Acer Aspire 5336-2524. Blank screen, can't see anything after reboot.
(Display=Mobile Intel (R) 4 series express chipset family)
Enter;'msinfo32.exe' in the search programs and files box. Open it up after search finds it. You'll then be able to see BIOS version. Go to Acer support and update BIOS if needed. I needed to and so far the result has been that I'm not able to see the install of Ubuntu, butttt,cannot see it after going through all the start up, up to the point where the desktop page should be, then blank screen again.
I'll come back with results.I also am thinking about updating video driver too. (Tried but said it was up to date)Additional (6-14-11@7:36PM) So far by updating BIOS I was able to view ubuntu long enough to install, but couldn't view fully loaded OS (as in couldn't see desktop). As mentioned by foresthill, plugging an external monitor into the laptop allows me to see everything on the external monitor. Ahhh, sweet progress! Waiting for reply from foresthill about exactly what they did in grub for a permanent fix.Additional Two: FYI: Xubuntu 10.10 runs great on the laptop. But no wifi (I cannot remember if I updated and ran across broadcom driver install as 10.04.2 did)
Finial Update: I Installed ubuntu 10.04.2, which had no problems with screen, couldn't use wireless until I update and then a note poped up about broadcom driver which I allowed to install, now I have a fully functional ubuntu. Someone recommended using "LTS" versions for initial install, then go from there if you want to try different versions. I'll wait for the LTS before messing around, just glad to finally get a fully functioning ubuntu!
View 4 Replies
ADVERTISEMENT
Apr 29, 2011
Is there a problem with Intel video cards and 11.04? I have tried upgrading and using a live CD and live USB with the same results on this notebook. After upgrading or booting off live CD/USB, I see a black screen, not lit. I can here the login prompt and when I press [Enter] and type my password I hear the Ubuntu theme which means everything is up, but still have a black screen. If I try to go to a console, I am still working with a black screen. Yikes ... I know my Live CD is ok, because it boots fine on my Lenovo S10-3 netbook.
Upgraded from Ubuntu 10.10 32 bit, live CD is 11.04 32 bit. Hardware: Acer Aspire 5732Z with Intel Mobile 4 series chipset integrated graphics controller (rev 09) and 3Gb ram.
View 9 Replies
View Related
Jan 23, 2010
Just installed 9.10 on a R3600. It booted fine, did apt-get upgrade, rebooted, still fine, activated nvidia drivers rebooted and now I just get a black screen.
View 1 Replies
View Related
Jun 10, 2010
Last weekend I installed Ubuntu 10.4 (Netbook remix) on my new Acer Aspire 751h. The installation seemed to go smoothly, but I've noticed several things that don't work as well as on my old AA 110. I should say that I installed Ubuntu in a dual-boot setup with Windows XP, which the machine already had installed. Firstly, the screen brightness can't be adjusted with the function key/hotkey combination. The sound volume hotkeys work fine, and the brightness hotkeys work with XP, so it's not a hardware issue. The default brightness is pretty dim, so this is an annoying problem. Is there a way to bind the hotkeys to the 'increase/decrease brightness' functions?
Secondly, the vertical scroll bar on the desktop doesn't work, by which I mean if I click above or below the highlighted area no scrolling takes place. However, I can drag the highlighted area up or down and scrolling does take place, and scrolling via the touchpad works. All forms of scrolling work normally within applications. Is there anything I can do to fix this? It's only a mild annoyance, though. Thirdly, in the power management preferences application I don't have an 'On Battery Power' tab - just 'On Mains Power' and 'General'. There are some other peculiarities that probably follow on from this. I have a power indicator in the top panel of the desktop, but on bootup it's a 'lightning bolt' icon rather than the battery-shaped icon it should be. If I plug into mains power, it changes to a battery-shaped 'charging' icon until it's fully-charged, when it changes back to the lightning bolt. If I then unplug the mains power, I get a battery-shaped 'discharging' icon, but this doesn't survive a restart. Obviously, a battery level indicator is very useful and I'd like to get it working properly. The help file for power management preferences says something about GConf policy keys that need to be made writable in order to display some sliders and option boxes. I certainly don't have as many sliders and options as shown in the help file. I guess this might be related to the screen brightness problem.
Finally (for now - I haven't explored everything yet) the screen ratio looks wrong. Circular icons appear as ovals. It looks like the software thinks I've got a 4:3 ratio whereas really it's widescreen. I can't see where I can change this. I've looked in 'System.. Preferences. Monitors' but there's nothing I can change there. System testing shows the apparent resolution at 1024x768, whereas the hardware spec is 1366x768. I'm wondering whether to try to fix these things individually or whether a better option might be a reinstall - perhaps without the XP dual boot. What do you think? I'm willing to change settings from the terminal but I'd need to be told exactly where to go and what to do.
View 2 Replies
View Related
Apr 28, 2011
This fixed a black screen issue and a brightness adjustment issue after installation of ubuntu. Also on 11.04 I couldn't get Unity to work until I edited grub I didn't come up with the fix but it took me forever to find a solution so I figured I would post it. If I have did something wrong just get a mod to delete or move this. I don't use forums often.
Code:
sudo gedit /etc/default/grub
Edit two lines to read as follows:
[code]....
View 8 Replies
View Related
May 1, 2010
I upgraded my wife's old Acer Aspire 1350 laptop to Lucid Lynx, which works fine, except for the fact that the splash screen both when the OS boots and is shut down is completely garbled and unreadable. The screen is also unreadable when accessing a tty via CTRL+ALT+F2 etc. The GNOME desktop resolution is completely unaffected and is perfectly usable. The splash screen works on MY desktop PC, but it does seem to be using some strange video timings, as my monitor recognises it as 640x480 but doesn't seem able to centre the screen properly. I strongly suspect that this is the cause of problem and my wife's laptop display just does not like the video mode. If I plug my wife's laptop into my monitor, it displays OK.
View 2 Replies
View Related
Jun 16, 2011
My Aspire's LCD was heavily cracked and I would like to replace it myself. I ordered a new screen in the mail, which just arrived, and pulled up an online guide to replacing the screen. However, it would appear that these guides deal with older models.
All the guides state that the screen can be removed by popping off six rubber things around the edge of the faceplate, revealing the screws underneath. I popped the rubber thingies off to find no screws, but was able to pull the faceplate off except for the bottom, which seems secured to the base by two screws on either side. I cannot get to these screws because they are each covered by two round pieces of plastic which are level with the faceplate.
I will take it to a computer repair place if necessary, but I would really like to try to get this done myself first.
Has anyone had success with removing the faceplate of a later model Aspire One? My exact model is D255E-13111
View 3 Replies
View Related
Jun 15, 2010
I'm a linux newbie so go easy on me with technical terms.I've got a Acer Aspire One ZG5. Everything was working fine until one day when I went to switch it on and it shows up everything its suppose to, the blue logo etc but then it loads upto a black screen with the mouse poitner. I can move the mouse pointer around and such and the lights flash but stop suddenly.I can't use the bios recovery disk as I haven't got a USB big enough.
View 13 Replies
View Related
Jul 15, 2011
I've got an Acer Aspire AM3920 (Intel Core i5) Desktop PC. I want to upgrade my Ubuntu Maverick Meerkat to Natty Narwhal, but it just isn't working. I've tried to upgrade two times, both resulting in a crash while installing. When I try to install it from a Live CD, I'm getting a black screen and when I press a key in the purple screen of the Live CD and select nomodeset, it doesn't work either. So my question is: Is it possible to install/run Ubuntu 11.04 on this PC?
View 4 Replies
View Related
Mar 3, 2011
I have been attempting to install Ubuntu 10.10 on my Acer Aspire One for a few days now. Its current OS is Win7 Starter, if that even matters.
-I made a USB drive and Ubuntu boots and runs just fine.
-I hit the "install Ubuntu" icon and it has me choose my language, then I hit forward.
-It asks if I want to install updates and/or third party apps, I check the boxes and hit forward - and then it just sits there with the cursor spinning like its trying to do something, but it never does. The longest I have let it sit there was four hours, and still nothing happened.
**This is the step it always stops on. Could the problem be that I am trying to install the desktop version instead of the netbook version? I tried the netbook version and I just don't like it as much.
View 4 Replies
View Related
Jul 6, 2011
Boot fail symptoms: Stuck at Syslinux first boot line.Ctrl+alt+del can't work. need to shut down whole system by holding the power button for 3 secs.
System:
-New Acer Aspire 5750, a supposedly popular model.
-i5 2410M + HM55
Remark:
Can boot from CD Ubunutu 11.04.
But, what is a new laptop when it cant boot Ubuntu from USB??
View 5 Replies
View Related
Jun 5, 2011
The acer netbook D255e - N57 comes with a factory installed linux OS but Acer reps seem unable to fully instal Ubuntu 10.1 or 10.04. Even linux lite lacked the drivers to run several things. Is it possible to do this??? If it can be fully installed I will definitely go for a new cyber life with linux but if not I may have to remain a thrall to bill gates and go for a Eee PC netbook instead.
View 1 Replies
View Related
Mar 12, 2011
I installed Ubuntu 10.10 on a Laptop Acer Aspire 3000 everything works perfect... excluding.... the Wireless Networks.
1. I cannot check marked Enable Wireless
2. Wireless Network disabled
The driver is installed when I installed Ubuntu 10.10 it asked me to install this. Is not a problem of driver I think. It is a Broadcom Corporation BCM4312
I found out the following:
1. I tried rfkill unblock all with negative results
2. rfkill list phy0: Wireless LAN, Soft blocked: no, Hard blocked: yes
3. look in the file system: NetworkingEnabled=true, WirelessEnabled=false, WWANEnabled=true
Is this really not supported by Ubuntu ?? username: melfrimarlyne e-mail: ferris@sowerseed.aw
View 3 Replies
View Related
Feb 27, 2010
When trying to hybernate the system tries to prepare to hybernation but when it is going to complete the operations it does not hybernate but finally suspends.
note that it is not exactly the same as choosing to suspend. In fact, it seems to me that when choosing to hybernate the system is unable to do it and consequently it chooses "at least" to suspend.
Ubuntu 9.10 fresh install
Kernel 2.6.31-19-generic
~$ lspci | grep Graphics
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
[Code].....
View 3 Replies
View Related
Apr 22, 2010
I have an Acer Aspire 5610 and since installing Ubuntu 9.10, the computer tends to shutdown by itself while I'm using it. Does this happen to anyone else? I would like to know what's causing this so I can either fix/solve it. I never had this problem on Ubuntu 9.04, 8.10 or 8.04. Checking the system log file viewer hasn't given me any clues to what's causing this. I just know the issue started when I installed 9.10.
View 2 Replies
View Related
Aug 5, 2010
I am a new user of Ubuntu, I use Ubuntu 10.04 Lucid Lynx on my laptop Acer Aspire 4741G and the specification are:
1. Intel(r) Core(tm) i5-430M Processor
2. Intel(r) HD Graphics
3. 2GB Memory
4. HD LED LCD
I have a problem in adjusting brightness, before this laptop, I used Ubuntu on my Acer Extensa, all shortcut buttons are working properly, include Fn button. To adjusting brightness, I only have to push Fn button + arrow left or arrow right. And now, I try in Aspire 4741G, it does not work. I also try to type command via terminal:
View 9 Replies
View Related
Aug 30, 2010
I have followed the directions to install the Netbook Edition onto my Acer Aspire One via usb drive. When I created the USB using the Universal USB Installer app, I created a 1GB persistence on my 4GB USB. I now want to install rather than run from the thumb drive, except when I get to partition area, it's showing no drives at all. I had XP, but I'd like to use the entire disk for UNE now. how to get it to install?
View 7 Replies
View Related
Jul 8, 2011
flashing the BIOS in my Acer Aspire 5720z. Issue is that fan won't switch on since update to Natty and so laptop overheats and shuts down. I know the risks and I'm pretty sure these issues are BIOS related so I am wanting to do it. The file from Acer is BIOS_v1.45.exe file and can be further extracted. Files are InsydeFlash.exe, iscflash.dll, iscflash.sys, platform.ini, CL50145A.fd, iscflashx64.sys. I have tried a few different methods and the closest I have come is creating a Dos Boot Disc with .exe file on it (although during creating it said there was no more space for .exe file but seemed to work ok)I can then boot into dos and find .exe file but it says file cannot be executed in DOS.
View 4 Replies
View Related
Apr 17, 2011
have tried to replace WindowsXP with ubuntu netbook 10.10 on my Acer Aspire one (model ZG5), I opted for erasing the disk completely to just have ubuntu on the machineit runs perfectly from the USB drive, but will not boot up after a full installation, I just get a black screen with flashing underscore cursorthere are several threads about this problem but I cannot glean a solution, I have used 2 downloads as I thought the first iso might be corrupted, but still cannot get the system to start upwhat is the next step, is it worth persevering or trying an alternative distro?
View 4 Replies
View Related
Feb 25, 2010
I have tried the following techniques to try and boot from CD on my Acer Aspire 5515 laptop: Change SATA information to Native in BIOS. Set the Boot order for the CD/DVD Drive to start first, along with Main driver starting second.
INFORMATION
My laptop is an Acer Aspire 5515.
BIOS Version is V1.0 (latest) from Acer.
PhoenixBIOS bios (?).
I have still not been successfully able to boot from CD. No matter if it says to boot from CD/DVD Drive first, it skips on to Main driver and starts Windows. It's not because I didn't burn the .ISO image right, because it worked on my desktop, which is ALSO an Acer, an Acer Aspire T180. What I am trying to do, is install Windows XP Professional, and dual-boot it with my Windows Vista. Only thing is, it WON'T boot from CD.
View 7 Replies
View Related
Nov 6, 2010
I tried to install ubuntu 10.10 NBR on an acer aspire one and the install crashed, it is a known problem but my main problem is that the 250gb SATA is partitioned in two and then i deleted linux swap and the ubuntu 10.10 partition to make free space.
a) how can i resize the windows 7 (dreadful OS) to what size it originally was
b) if i install an older version of ubuntu (10.04) will it boot up as if i chose the partition alongside other OS or will i have to install a bootloader (I have never done a specify partitions install)
C) is it that acer aspire one's cant load any version of ubuntu (I know a mad idea as ubuntu has many drivers and should work with it.)
View 4 Replies
View Related
May 9, 2011
I've been running Ubuntu on one of my old notebooks (Acer Aspire 5516) for the past two years. My problem started when I tried to upgrade to 11.04 64 bit. The installation seemed to go fine, but when I restarted to finish, after I would log in all I would see is the background with no menus or anything. I tried doing a fresh install and seeing if that helped, but it didn't. I had to downgrade back to 10.10. Does anyone know if 11.04 works at all on the Acer Aspire 5516 or a similar model? Even at 32 bit?
View 2 Replies
View Related
Oct 12, 2010
I have tried and failed to install the lastest netbook version 10.10 on my Acer aspire one 110 netbook, this is the one with a 8gb ssh.
It booted fine on a usb drive and I was able to test drive the distro. The installation went all the way through without any problems but when it came to rebooting the netbook just showed a blank screen with a dash in the top left of the screen. There is no sign of the computer looking for the hard drive it just sits there!
If I reboot using the usb key I could see that all the files have been installed on the 8gb drive. I have reloaded 10.04 which works just great and during that installation the installer could see that 10.10 was installed.
Has anybody else had this problem? I was wondering is there is a problem with GRUB , however it would be nice to install the new version it's so frustrating to have failed.
View 3 Replies
View Related
Jun 19, 2010
Didn't see a guide on this on the wiki. Correct me if I'm wrong and feel free to add some tips. (Keep in mind that I am a total beginner with Linux)This computer comes with Windows 7, which I seek to wholly replace, not partition. More info on the computer can be found here-Download Squeeze Installer (don't know which source to use or if I'll pay for a Live CD or Live DVD)-Install Debian Squeeze-Restart computer-Set up Squeeze/KDE-Use Squeeze-Compute happily ever afterJust have to ask, what do I do about about wifi connectivity? It seems that certain Aspires have trouble connecting to wifi when Debian has been installed and I really need to be able to use the 'Net with my lappy. Where would those drivers/firmware be found?
View 12 Replies
View Related
Apr 8, 2010
I have an Acer Aspire 1410 laptop which was running Win7. The laptop lacks a DVD drive and came pre-installed with a recovery partition as well.I've been searching for ways to dual-boot Fedora on it. I bought a Samsung USB DVD drive, but I burned two copies of Fedora 12 and neither would boot, nor would my Knoppix Live CD. I even updated the bios. Then I tried liveusb-creator from my desktop Fedora 10 system, but I would still run into strange errors that prevented booting into the installer.
Finally I downloaded UNetbootin and created a USB stick to boot Fedora 12. Neither Fedora 12 nor Ubuntu would recognize my network adaptor for some reason. Undaunted, I then used UNetbootin to create a Fedora 11 image which got me into the boot installer for the first time. I then used my Fedora 12 image from my portable DVD drive to install. The install seemed to go well.
That is, until I rebooted. Grub came up as expected. Fedora 12 runs into a very early Kernel panic (not syncing: DMAR hardware is malfunctioning) within moments. I tried rebooting into Windows, but it apparently doesn't care much for Grub. It sends me into the Recovery software and asks me to reset my hard drive. I've tried that a couple of times now and it's useless. Is the problem with Grub? I thought it would play nicely with Win7 and at least allow me to boot into it, which is why I allowed it to overwrite my MBR. I lack a Win7 disc and cannot repair the MBR that way.
View 4 Replies
View Related
Jan 7, 2010
I just purchased an Acer Aspire 5050, and was trying to install Ubuntu on it for my mother. (No, I am not forcing it on her, she actually asked for it.) I burned a CD and put it in the drive, and it said Operating System not found. So I went into the BIOS and told it to boot nothing but the optical drive. Same error. I burned another disk with the same computer, and then another computer. Same error. (Hereafter referred to as "nothing")
So I went and purchased a 4GB flash drive from micro center. Converted my iso to img and DDed from my Mac, then set the BIOS to boot it. The BIOS recognizes the disk, but won't boot from it, giving the same error. So I thought: Fine, I guess I can't get _nix to boot, how about Windows 7? Put the disk in that I used to install on my laptop, genuine Windows 7 disk, nothing. I tried the Vista disk that came with the computer, also nothing.
Any ideas on how to install ANY operating system on this machine? I get absolutely no POST errors. I turned off Quiet Boot and looked, no errors there either. I would be fine installing any _nix based, it doesn't have to be an easy install. I can provide more information as needed, not a problem. I can't think of any more useful information at the moment.
View 1 Replies
View Related
May 25, 2010
Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.
It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.
What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.
View 2 Replies
View Related
Jul 30, 2010
I just tried to install ubuntu 10.04 to the hard drive of my netbook as i prefer it greatly over the standard linpus one. The operating system booted fine from a bootable usb drive and so i thought if i install it it should run.
so...i got to work installing the system...it completed and asked me to restart, which i did. From there the boot up screen comes on for the pc.....the one where it says press f2 for setup and f12 for boot priority....then goes to a black screen. on this black screen i have a message which says...
"error: no such device: 992fddd7-54c1-45e0-b990-7220c6fa9005 grub rescue>"
View 2 Replies
View Related
Nov 13, 2010
I'm thinking of buying an Acer Aspire D250 loaded with Win7 and then adding a version of Ubuntu.
The netbook will come with the Acer recovery facility to reinstall Win7 from a recovery partition in the event of OS failure. This means that the MBR and subsequent loaders need to be preserved for this function to remain (I don't have a Win7 disc and don't want to have to buy one).
I'm happy with a basic Win/Linux dual boot setup but I'd value any comments/suggestions as to how to preserve the recovery function when I add Ubuntu.
View 9 Replies
View Related
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
