Fedora Installation :: How To Enable 3D Mode In 15
Jun 14, 2011
The first time I started F15 the following notice appeared (approx.: I have translated it from spanish):Quote:Unfortunately GNOME 3 failed on having started and it is now in alternative mode. It probably signifies that your system (graphic hardware or controller) is not capable of executing GNOME 3 complete.Computer data: AMD Athlon XP 2400+ 2,01GHz; 1.5 GB RAM; ATI Radeon 9200SE. Fedora 15.I have checked in several pages of the net that Radeon 9200SE is able to support 3D.I should like to modify the Open Source Xorg to enable the 3D mode (not to install the proprietary drivers, this will come later if there is not another solution), but I don't find the /etc/X11/xorg.conf. There is the /etc/X11/xorg.conf.d
View 10 Replies
ADVERTISEMENT
Aug 6, 2009
I have kubuntu 9.04 installed in my computer and I am normally using a Gnome environment desktop (though I get back to KDE or Xfce if I have any troubles with Gnome)
This afternoon I restarted my computer and since ever I am unable to log in. I press the on button, get to the partition page and select Ubuntu 9.04 and the computer shows the login page
however, once I type in my password, the computer tries to log in but then brings me back to the login page asking for the password again. I have tried to login as Xfce, Gnome, KDE, Failsafe mode and the result is the same. The only way to get through is to login through the terminal, but then I am unable to get back to the graphical mode.
View 5 Replies
View Related
Jun 2, 2010
changed terminal into raw modecfmakeraw(&termios);After that terminal no more captures CTRL+CIs there a way to enable CTRL+C (to terminate the program) while still have RAW mode?
View 3 Replies
View Related
Jan 20, 2010
Ubuntu Community, I have just switched to ubuntu 9.04, from openSuse.
Am programming with bluetooth. I get the following error. code...
View 3 Replies
View Related
Nov 5, 2010
I am running wireshark on my laptop. It is only showing me the packets addressed to and from it, and broadcast packets. I am running it in promiscuas mode, and in iwconfig set the interface to mode monitor. However it can still not see packets from my other laptop. They are in the same room, both wirelessly connected to the same network.
View 2 Replies
View Related
Aug 5, 2010
i booted up my Ubuntu 10.04 and at the login promt I changed from GNOME to xterm session. Then i logged in and opened my programs and it didn't have the gtk theme enabled that i have when I start my ubuntu in GNOME session mode. How do i enable gtk themes there so everything looks pretty again? I like starting from xterm because it's very fast..
This is how it looks, notice the ugly buttons and everything... the gtk theme is not loaded and i don't know how to enable it..
[URL]
And here i will show you how it should look and how it normally looks with the gtk theme loaded up... basically i would like it to look like this even when i start it from xterm..
[URL]
Really, I would like to know how i can enable gtk themes when I run my computer in xterm session mode. Is there another application that i have to run? I don't want to run the full GNOME environment, i really don't.
View 3 Replies
View Related
Mar 4, 2009
Can you give me a step by step screenshot procedure in installing Fedora Version 8 64bit?
View 6 Replies
View Related
Jan 30, 2010
I installed ubuntu 9.10/9.04 on my usb key as live image couple of time. I have trouble when I try to install wine on my usb key. I am wondering what is the difference if I install my ubuntu into my usb key directly? will that be slower compared with live CD mode? I guess live CD mode may use memory as part of harddisk to save temepory files and normal usb linux installation won't do this for me. Is this true?
If so, do I have a choice to point my tmp directory to system memory area?
View 1 Replies
View Related
Aug 11, 2010
How to recompile squid under fedora 13 to insert this arguments ---> --enable-storeio=diskd,coss
View 2 Replies
View Related
Jan 28, 2011
I am setting up a new machine.
As it came, there was no printing icon under System>Administration.
I added system-config-printer
and that took care of that.
But when I open that, Add printer is grayed out.
I don't have any printers connected to this machine, but I want to setup remote printers. I had no problem doing that wit h Fedora 11 and Fedora 13 on another machine wit h no printers attached. perhaps I'm st ill missing some package>
I added system-config-printers and some other packages I thought might be relevant. I then tried trouble shooting and that reminded me I had to start cups. In addition I had to start samba---it was a windows printer---and I had to configure the firewall to allow samba. I was then able to find the remote windows printer, but I couldn't configure it because it wasn't in the database. After some more fiddling---I think additional HP packages were added---I was able to configure it as the correct printer. It now seems to be working.
View 1 Replies
View Related
Mar 4, 2009
It seems I had no say in the matter. The installer automatically did text mode and it starts up in text mode now. I'm very new to Fedora, though I had Ubuntu installed recently but removed it because Fedora seemed a little more interesting to me. I'm on an HP Pavilion dv2807nr laptop if that helps.
View 14 Replies
View Related
Jul 14, 2009
Somehow the install iso disc won't go into upgrade mode. My f10 is on the hard disk, but needing to be rescued. I would do f11 upgrade; but can't get the disk to do an upgrade. It only wants to install.
Checksum was good, etc. iso is fine. Is there a log file or something which it keeps getting hung up on, thinking it's supposed to install instead of upgrade which I could change or delete?
View 7 Replies
View Related
Aug 27, 2009
I tried installing Fedora 11 on my i386 using the 6 CD set that I downloaded. Since my system has only 128M of RAM, the text install mode was used. The 1st CD installation seemed to work OK. After 181 out of 181 packages were installed, the system rebooted and did not ask for me to insert the other CDs. now when my system comes up, it is always in text mode.
Q. Is there a command I can use to have the remaining CD's installed so I can install the graphics system?
View 7 Replies
View Related
May 31, 2011
I made a clean installation of F15 on my laptop, is a Qosmio x505, it has an nvidia M360, so I download the nvidia drivers and intall it separatly.To install the nvidia drivers I change the runlevel with the commandln -sf /lib/systemd/system/multi-user.target /etc/systemd/system/default.targetAnd then, change it again to the graphical mode with the commandln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.targetEverything seems ok, but the system only boot in text mode. I can load the Gnome with the command startx without problems, but how can I made that it loads the Gnome automatically?
View 2 Replies
View Related
Jan 28, 2009
trying to understand the two underlined sentences below I got to ask Step by step. I created a new group called usb. I inserted a usb printer and scanner. I tried to find the file usbfs and there is where get stuck already. I only can find a folder with that name. The sentence (3 -) makes almost no sense to me.
a) modify file /etc/fstab clear open terminal, go to etc, su gedit fstab
b) inserting a line yes I understand that!
c) the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
2 - locate file usbfs: in my case is /sys/bus/usb/drivers (I suggest to find the file with a usb device inserted;
3 - modify file /etc/fstab inserting a line containing the right path and the number corresponding the "usb" group :
none /sys/bus/usb/drivers usbfs devgid=503,devmode=664 0 0
View 5 Replies
View Related
Jun 13, 2011
I am an emacs user, and I noticed that on my new machine (running F15, 64bit) flyspell-mode will not work in tex mode.
I get errors that look something like this:
Code:
Spell-checking inequality-model.tex using hunspell with default dictionary...
Spell-checking region using hunspell with default dictionary...done
ispell-send-string: Process ispell not running
When done with a buffer, type C-x #
code....
View 2 Replies
View Related
Feb 5, 2009
I'm experimenting a bit with my fedora, so I need to enter rescue mode very often. Every time I want to enter rescue mode, I need to insert fedora DVD Is there a way to install rescue mode on my hard drive so I could boot into rescue mode from GRUB?
View 4 Replies
View Related
May 19, 2009
I wanna install Fedora 10 in text mode and use it in text mode. So i wanna know what kinda packages or software i should exclude when installing to save some time and space.
View 1 Replies
View Related
Dec 31, 2009
my setup
P4 3.4GHZ
2GB Ram
Gigabit Ethernet
Drive Configuration
1 x 750GB Sata
Connected To My Raid Controller in ide mode
1 x 120GB IDE HDD
1 x 250GB IDE HDD
my problem, I Am trying to install f12 and the only drive that it sees is the 750GB Sata,it is not seeing the other 2 ide drives The raid controller is an ite 8212 in ide mode The Bios Sees the drives just F12 doesnt
View 1 Replies
View Related
Jul 18, 2009
I just installed Fedora 11, and am trying to install my video card drivers. I have an Nvidia geforce gtx 260m. So far I have installed both the kmod-nvidia and akmod-nvidia packages, and I still cannot enable desktop effects. After i installed the akmod package, I sometimes see the nvidia logo for a split second when I log out, but my drivers are still not correctly installed.
View 9 Replies
View Related
Jan 5, 2010
I want to install F12 x64 from boot.iso.
My ISP give Internet connection only by PPPoE. A problem is next.
After partitions creation installation offer me connection from eth0 device - I need ppp0 device.
Is any way to create ppp0 device, configure PPPoE connection during installation from boot.iso?
May be it is anywhere documentatons create your own boot.iso with added PPPoE ?
I don't want download full DVD F12 or LiveCD.
View 2 Replies
View Related
Dec 20, 2010
I am unable to login to kde after upgrade to fc14 from fc13 as user , the splash screen works for seconds and returns back to login screen, but I am able to do as root
I also managed to login to KDE (failsafe session)
and also I am able to login as normal user to gnome desktop
View 5 Replies
View Related
Feb 10, 2010
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies
View Related
Jan 23, 2009
On some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?
View 2 Replies
View Related
Dec 27, 2009
Since the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?
View 2 Replies
View Related
Mar 25, 2010
I install Fedora10 in my computer but when it begins the process of installation, it says that "x startup failed" and falls to text mode of installation. Howerver, the graphic mode works in another computer.
View 1 Replies
View Related
Jul 2, 2010
when I tried to install Nvidia driver for my computer, and when I reboot it, I found i can not log into the x-window mode as the screen display freeze at the point where suppose to be login screen. so use grub go to text mode, try to reinstall the akmod-nvidia xorg-x11-drv-nvidia-libs.i686, but it failed, sames i don't have internet connection to retrieve it. how can I start my network connection under text mode?
View 13 Replies
View Related
Aug 25, 2010
I'd like to install Fedora12/13 on a external USB 2.0 HDD. Ive managed to do so with the live image several times, but the DVD installer does not see that particular USB HDD so I cannot install Fedora on it. Its the same with F12 and F13.Ive already tried to start the installation in expert mode. The expert option is ignored or something (linux expert/expert does nothing). Im not sure where exactly to write the options. I chose the rescue line and changed rescue to expert (nothing happend).
Then Ive tried Ctrl+Alt+F2 > "modprobe usb-storage" with no output (that should be right, right?). Again nothing.How to start anaconda (the DVD installer) in expert mode?How to load proper modules (to get the USB Drive to be recognised)?How to install Fedora12/13 from DVD onto USB2.0 HDD?
View 8 Replies
View Related
Nov 22, 2010
Is it still possible to use LiveCD to boot into rescue mode and run fsck?
I just want to run fsck on my hard disk and make sure all is well.
Does fsck provide and logs or records of what it found?
Is it possible to run fsck without LiveCD?
View 5 Replies
View Related
Oct 17, 2010
I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?
View 2 Replies
View Related
