Fedora Installation :: Enable Nouveau Back After Installing NVIDIA Driver?
Oct 17, 2010I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?
View 2 Replies
ADVERTISEMENT
Red Hat / Fedora :: Disabling Nouveau / Installing NVIDIA Driver?
Nov 26, 2010First some specs:
Fedora 13 (Goddard) 32-bit
NVIDIA GeForce GTX 260
The DVI output on my card works just fine to my monitor, which is what I've been using. I installed no drivers; it just worked. However, now I need a duplicate screen to be given via the s-video output, but it doesn't work. Nothing is being given to the tv and nothing is being detected under monitors. From what I understand, this is because I need to install the appropriate Driver.
I downloaded my driver from the nvidia website, but it won't install. it tells me I need to disable nouveau.
Fedora :: Install F15 Without Nouveau To Make Nvidia Driver Installation Easier?
Jun 7, 2011Can this be done similar to some other O/Ses so Nouveau doesn't pre-screw up the kernel for 3rd party drivers??? Would be great in F16 if we were given a choice re: wanting nouveau or not. I simply can not get F14 or F15 to work with the 270.xx drivers on recent equipment.
View 10 Replies View RelatedFedora :: Back To Nouveau Driver - Display On Projector?
Nov 12, 2010Fedora 13, x86_64, up to date. Trying to get nVidia Quadro NVS 140M to display on a projector the same as it does on the laptop screen, which is 1680 x 1050. I failed to do so with the nVidia driver (latest version), so I want to go back to the nouveau driver and try with xrandr. I have always used the nouveau driver with Fedora without an issue, but in my former life in Ubuntu I sometimes switched back and forth between the "nv" driver and the nVidia driver.
Doing so was trivially easy - just edit xorg.conf replacing "nv" with "nvidia" or vice-versa, then restart X. However, after installing the nVidia driver via Yumex and using the nVidia config utility, I find that now I have an xorg.conf file that is loaded with stuff I don't understand, except that at the top it says it was created by nVidia, and there are two places where it says the driver is "nvidia." I have searched and all I can find is instructions for installing the nVidia driver.
Apparently that is meant to be a one-way ticket, because I can't find any instructions for how to return to the nouveau driver. Except stuff that is over a year old, and complaints from users whose systems failed to start X. What would happen if I just replace "nvidia" with "nouveau" in the xorg.conf file and restart X? I know if it won't start X I can boot to rescue mode and re-edit xorg.conf, but I'd rather ask first and do it the right way than have to repair a broken system.
Fedora :: Nouveau Gallium3D Driver Will Work With Nvidia Cards In 13?
Apr 2, 2010I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies View RelatedFedora :: Nouveau Makes F13 Unusable Until Nvidia Releases Driver
Jun 18, 2010I am using an Nvidia GeForce FX5200 card and nvidia hasn't released a driver that seems to work with it in Fedora 13 yet.. However, I decided to do an install of F13 and use the nouveau drivers until Nvidia updates their drivers, however, the nouveau drivers don't work worth a crap with my card I did a fresh install and then ran a yum update. What I am seeing is after a few minutes, all the icons disappear, no fonts, and nouveau starts throwing errors to my message log. Here are the messages I get:
[Code]...
Fedora Installation :: Nvidia Driver In F11 - Cannot Enable Desktop Effects
Jul 18, 2009I just installed Fedora 11, and am trying to install my video card drivers. I have an Nvidia geforce gtx 260m. So far I have installed both the kmod-nvidia and akmod-nvidia packages, and I still cannot enable desktop effects. After i installed the akmod package, I sometimes see the nvidia logo for a split second when I log out, but my drivers are still not correctly installed.
View 9 Replies View RelatedFedora :: F15 Disable Nouveau Driver In Prep To Install Nvidia Drvr
Apr 26, 2011Nouveau won't go away.I done the rdblacklist in grub and blacklist in modprobe.d but it still persists.Is there something else I need to for Fedora 15?
View 7 Replies View RelatedUbuntu :: Uninstall The Nouveau Driver And Install NVIDIA-x86-71.86.14-pkg1.run For Old Nvidia TNT2 Card?
Nov 30, 2010Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
OpenSUSE Hardware :: How To Clear Proprietary NVidia Driver And Replace With Nouveau Driver
Jun 13, 2011There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
Fedora Installation :: FC14 Upgrade Breaks X, Nouveau/nvidia?
Jun 17, 2011My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
Ubuntu Multimedia :: Switching From Proprietary Nvidia Driver To Nouveau?
Dec 17, 2010I'm using ubuntu 10.10 with the proprietary Nvidia-driver for my graphics card. I'd like to switch to the open source Nouveau driver. What is the best way to go about this?
Ubuntu Installation :: Enable Nvidia Driver From Command Line?
Mar 22, 2010I'm having problems with my Nvidia card. X doesn't work after installation (9.10), only command prompt. I've read the instructions at http://www.psychocats.net/ubuntu/nvidia on how to enable Nvidia drivers, but the instructions are only for GUI, which I don't have.
Anyone knows how to enable Nvidia drivers from command line ?
Fedora Installation :: Nouveau Driver Reset To Defaults?
Jan 18, 2011I installed the nvidia driver from the vendors homepage. But since it does not support regulation of brightness (and the display is that bright that I want to downlevel it), I wanted to go back to the default display driver which is the nouveau driver.So I uninstalled the nvidia driver and then I realized that I didn't make any backup of the xorg.conf file prior installing the nvidia driver. Shame on me, yeah.Now when the x-server started, it couldn't find the nvidia driver. Okay, fair as it was removed. Next to that my keyboard becomes unresponsive. That's really aching as I can not switch to a text-based console any longer.I'm able to boot into initmode 3 by editing the kernel parameters in the boatloader. I'm also able to edit the xorg.conf with vi in the shell then and start the xserver to test things by calling xinit.
I already tried to recover a bit from this situation by removing the references to the nvidia driver and replaced it with some information I could find on the nouveau homepage - but no luck so far, keyboard still freezes and login window does not appear. I could take a look into the xorg.0.log which warns me about the keyboard getting disabled but I do not really understand why. Next to that I find some other additional information. My computer experience is quite okay, but I'm somehow new to Fedora, I started half a year ago with Fedora 13 on my other laptop which worked like a breeze.
I wondered where I can find information about how to configure the xserver in the default configuration, if there is some reset functionality or so, that brings me back to installation defaults. Those worked ok for the nouveau driver. Unfourtionatly I was not able to gather the correct package name that would probably had helpded me by removing and installing it again.Next to fixing my setup, I had another idea as this is a quite new install to just re-run the install again on to that machine. Is this possible with keeping the files in my homedir?
Fedora :: Enable The Nvidia Driver - Blank Screen With Flashing Cursor
May 6, 2010I recently followed instructions to enable the nvidia driver. run the following commands:
[Code]....
then rebooted, a tricoloured loading bar appeared and finished, then all i got was a blank screen with flashing cursor. I don't get a prompt to login and can't access my account. I am dual booting on this machine with ubuntu, is there anyway i can restore my fedora partition and enable my nvidia graphics
Fedora Installation :: F12 Installation Freezes Due To Nouveau Driver
Nov 30, 2009As I mentioned before, I has having freezes while installing F12 (x86_64) with a GeForce 8600 GT. I was able to complete the installation by doing it with the "basic" video driver. However, I was still getting frequent freezes. I installed the testing Nvidia drivers, and the freezes went away. When it froze, it was a hard freeze -- it wouldn't respond to CTRL-ALT-DEL or SysRq (I did enable SysRq first). I had to do a hard reset.
View 7 Replies View RelatedFedora Installation :: Nouveau And NVidia Drivers - Jet-black Screen And A Completely Inexpressive Blinking White Cursor
Nov 29, 2009Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies View RelatedFedora :: Installing The Nvidia Driver On F12?
Jan 22, 2010I have some trouble installing the nvidia driver on Fedora12. I started to follow the guide posted by Leigh here:[URL]..I enabled the rpmfusion repo, but when i wanted to install kmod-nvidia and xorg-x11-drv-nvidia-libs.i686 i had a depadency failure Here's what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
[Code]...
Ubuntu Installation :: Not Able To Boot After Installing NVidia Driver
Apr 3, 2011I have install Ubuntu 10.10 64bit in my sony vaio vpccw16fs which have Nvidia graphics card (GT 230M). I have install it using nomodeset and after entering the system I installed nvidia from System> Administration> Additional drivers. Driver version was current 260.19.06. After installation I was able to see the boot screen but was unable to see the logon screen. The computer froze with the background color of bootscreen which is purple. And I have to restart it and have to choose failsafe graphic mode. And after logging in in failsafe graphic mode. My NVidia driver says I am not using it. How to use nvidia driver properly. I have tried many Tutorials present on internet but none of them works.
Here is my xorg.conf file.
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
Fedora :: Installing The Nvidia 8800gt Driver On F12?
Dec 22, 2009I have trouble installing the nvidia 8800gt driver on Fedora 12.It keeps on asking me to exit the x-window, but how?
View 10 Replies View RelatedFedora :: Does Not Start After Installing Nvidia Driver
Jul 30, 2010I installed nvidia graphics card on my fedora 13. It is not starting since then. Just the logo of fedora comes up, progresses, and it stops. What can be done to boot the os?
View 2 Replies View RelatedFedora :: Advantage Of Installing The Nvidia Driver?
May 25, 2011Currently I have F15 running with the nouveau driver. What is the advantage of installing the nvidia driver?
View 8 Replies View RelatedHardware :: Installing Nvidia Driver In Fedora 10?
Dec 1, 2008I am having a world of trouble getting my old GeForce2 MX400 to work in a fresh install of Fedora 10. I included the RPMFusion directories, so my yum repolist includes:
rpmfusion-free RPM Fusion for Fedora 10 - Free enabled : 324
rpmfusion-free-updat RPM Fusion for Fedora 10 - Free - Update enabled : 0
But when I type yum list | grep nvidia, nothing comes up. When I type yum install kmod-nvidia or yum install akmod-nvidia, it says there's no package like this. Have these been updated for Fedora V10 yet? If they haven't, I guess I will just have to use another distro. BTW, when I tried installing the driver from the NVIDIA website, it says it needs to recompile the Kernel, and after installing gcc and make, it still gave some weird error about how with kernel 2.6 it can't find the proper kernel headers or something like that. I heard somebody post that you shouldn't use the NVIDIA drivers, they mess up OpenGL, you should you Livna kmod-nvidia.
1) Would you recommend livna kmod-nvidia or Nvidia's own driver's for a GeForce2 MX400 and Fed 10?
2) Whichever you recommend, could you give some clue how to get around either problem I'm having?
Ubuntu Installation :: Internet Disconnection After Installing Nvidia Driver
Jul 6, 2010last night i have fresh installed ubuntu 10.4 on my computer. Then after that, I installed the updates. Lastly, i installed nvidia hardware driver so that i could use its graphical effects. After rebooting my computer, i've noticed that i was disconnected from the internet. And I was surprised that it is the cause of my internet disconnection because when i remove it, my internet comes back. What should I do with this?
View 7 Replies View RelatedFedora :: Plymouth Not Working After Installing Nvidia Driver?
Nov 20, 2009I used leighs post to install the nvidia driver for Fedora 12 and now plymouth does not work it uses the text theme. Right before it goes into the text theme I get this message:
"Unknown boot option `nouveau.modeset=0' : ignoring"
Fedora :: After Installing Nvidia Driver FC12 Not Able To Start System
Mar 9, 2010I just install FC12 after all settings are done I install nvidia driver for PAE kernel whit the command # sudo yum install kmod-nvidia-PAE after reboot the system is not able to boot again.What I can do to uninstall the driver?
View 1 Replies View RelatedFedora :: Installing Nvidia's Propriety Driver From The RPMFuzion Repos
Mar 18, 2010I borked (broke) my install of Fedora 12 I have an Nvidia 6600 GT AGP card. I was using the Mesa driver. I wanted something better so I tried installing Nvidia's propriety driver from the RPMFuzion repos. Everything seemed to go fine until I tried restarting the computer. It shows the F logo in a balloon type circle filling up and then goes to a black screen with a blinking cursor in the top left corner and stays that way. If I press F2 when Fedora is starting then I see a list of what is happening. It gets to the point of ''Starting atd.........OK'' and then it stops and the screen starts flashing. Curiously, earlier in the list it shows that the Nvidia driver starts OK.
If I had to guess I'd say that the xorg.conf file has some setting in it that isn't working with the Nvidia driver. But I have no idea how to get to a prompt so that I can go to the folder containing the xorg.conf file and rebuild the file. Or, if you know better than that and know what I've really done then I'm listening.
Fedora :: Installing NVidia's Driver With Their Shellscript But It Didn't Work
Jan 10, 2011I'm trying Fedora for the first time. I tried installing NVidia's driver with their shellscript but it didn't work for lots of reasons. Has anyone done this before?:[URL].. Does it work? I never used a distro with a package manager before. Aren't there several different drivers for different NVidia cards? How do the instructions in that link make you get the correct driver? And then does it create an /etc/X11/xorg.conf file?
EDIT: or is the Neaveau driver good enough already? I can't figure out if it's basically a finished product or not.
Ubuntu Installation :: White Screen After Installing Nvidia Restricted Driver As Prompted
Jan 6, 2010I've had Ubuntu installed on my desktop for a month now, and its all worked like a charm, so I'm thrilled. I then decided to install it on my old laptop as well to see if I could breath a bit more life into it, and to get used to working Ubuntu a bit more. The laptop had 18.6GB partitioned to C:// drive or windows XP, and an empty 18.6GB D:// drive, so I deleted the D:// drive in XP using the Microsoft disk utilities tool, all well and good. I then did a clean install of Ubuntu-9.10-desktop with an Ubuntu CD into the largest continuous free space, and it set it up nicely. When I first booted it up there were a ton of updates to install, as there had been on the desktop first time, which I dutifully installed. As on the desktop a little notice popped up telling me to install the NVidia Proprietary driver for the NVidia card (specifically "NVIDIA accelerated graphics driver (version 96)[Recommended]"), as it had when I installed it on the desktop, so I chose to install that and then restarted the computer.
On restarting GRUB2 loaded, and it booted Ubuntu. I then saw the little white logo on the black screen for a couple of seconds, and then the screen goes completely white, with some pixels left behind fading to white slightly slower. First time through I held down the power button to force shut down, and on restart exactly the same thing happened. This time I held down alt+sysrq and went through the R, E, I, S, U, B sequence, however as opposed to usual I didn't get a black terminal-like screen after hitting any of the buttons, although it did reboot on B. It did boot correctly in recovery mode, however I was at a loss what to do here. Incidentally, the same problem occurred when I booted to previous version of the kernel as well.
Then I decided that as I didn't have any data to lose, and it was still early in the day, I'd do a clean re-install. This time I chose to ignore the updates, and just install the NVidia driver as prompted to check that it was the driver causing the trouble. Having installed the driver and restarted I got exactly the same problem as before - definitely this pesky NVidia driver, not any of the updates.So here I am at clean install 3, having just got all the updates, but not having downloaded the NVidia driver as prompted, with little desire to go through yet more reinstalls. My questions are:
1) Do I need to install this NVidia driver? The rest of the computer specifications are fairly paltry by modern standards, and I won't be doing anything graphics intensive on it (the most graphical program will probably be Battle for Wesnoth) and I I don't need to install it, not installing it seems to be the easiest way to solve the problem.
2) If I do need to install it how would I go around doing this without getting my charming white screen?
3) Is there a way of removing the driver from recovery mode that doesn't involve a clean install again? I have tried sudo apt-get purge nvidia-driver, which tells me there isn't any installed. I have tried sudo rm /etc/X11/xorg.conf which made no difference. I have tried dpkg-reconfigure xserver-xorg and this didn't help. I have tried a couple of other commands as well but I can't remember them, however I would probably recognise them if I saw them again.
Onto System information - pulled from listed specifications and SysInfo:
General System Information
Release:Ubuntu 9.10 (karmic)
GNOME: 2.28.1 (Ubuntu 2009-11-03)
[code]....
Ubuntu Installation :: Stuck On Checking Battery State After Installing Nvidia Driver 10.10
Apr 21, 2011I just installed ubuntu on my m11x and am completely new to ubuntu. After installing the latest driver for the 335m I am stuck at checking battery state and there is no way I can get to the gui anymore. The only access I have to are the tty's and I don't know what to do. I have already tried finding a solution for a couple of hours, but cannot find any. Please help me solve this problem, I do not want to reinstall again.
View 2 Replies View Related