Ubuntu :: Unable To Retrieve Local Discovery Mode / Enable This?
Jan 20, 2010Ubuntu Community, I have just switched to ubuntu 9.04, from openSuse.
Am programming with bluetooth. I get the following error. code...
ADVERTISEMENT
Software :: Unable To Log Into Ubuntu Using Graphical Mode / Enable This?
Aug 6, 2009I have kubuntu 9.04 installed in my computer and I am normally using a Gnome environment desktop (though I get back to KDE or Xfce if I have any troubles with Gnome)
This afternoon I restarted my computer and since ever I am unable to log in. I press the on button, get to the partition page and select Ubuntu 9.04 and the computer shows the login page
however, once I type in my password, the computer tries to log in but then brings me back to the login page asking for the password again. I have tried to login as Xfce, Gnome, KDE, Failsafe mode and the result is the same. The only way to get through is to login through the terminal, but then I am unable to get back to the graphical mode.
Ubuntu :: Deluge WebUI Enable / Re-enable Subsequently Unable To Re-enable It (doesn't Appear In The Side Panel Again)?
Feb 10, 2010I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies View RelatedServer :: How To Store Password In Encrypted File / Retrieve It In Secure Mode?
Jul 14, 2011there are some configuration files where linux require the password of application user, to do something.how can i to encrypt the password in these files? Or how can i to store that password in encrypted file and retrieve it in secure mode?
View 2 Replies View RelatedUbuntu Networking :: Unable To See Local Web Sites From Local Network
Jun 28, 2011I have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies View RelatedUbuntu :: Unable To Retrieve Message In Evolution?
Oct 15, 2010I have Ubuntu 10.04 (I think) using Evolution 2.28.3. When new messages come into the inbox, I get a message "Unable to retrieve message" in the lower screenI can work around it by clicking on the first folder under Inbox and then back to Inbox. When I click to the subfolder I have a message at the bottom that says "Error while Storing folder 'Inbox'".It would be nice if it simply worked the first time. It feels like it thinks there are two or more folders that might be "Inbox".
View 6 Replies View RelatedUbuntu Networking :: Cannot Enable Mod Rewrite On Local Apache Server
Feb 22, 2010I have a base install of a LAMP server on my system, and I'm trying to get mod_rewrite working on that local server (the directory of the local site is [URL]. I added this to my /etc/apache2/httpd.conf file, which was blank before I did so:
Code:
<Directory />
Options FollowSymLinks
AllowOverride All
Order deny,allow
[code]....
It's supposed to redirect everything except the listed directories to index.php, which is used as a front controller. However, if I type in [URL] <any other page> I get a 404 error.
CentOS 5 :: Enable 5.5 For Remote-to-local X Display
Sep 1, 2011my local box is centos 5.5 running gnome.
I have a eucalyptus instance (vm) running an older version of centos (5.3?). As a vm it has no graphical display. I'd like to run a graphical app there so that it displays back on my local machine.
Used xhost locally and it shows the remote IP (eucalyptus instance) as enabled. On the remote side (eucalyptus instance) I set DISPLAY with:
export DISPLAY xx.xx.xx.xx:0.0
where xx.xx.xx.xx is my local ip address. Oh, I did install X in the vm instance (yum groupinstall "X Window System"). X is installed but not running there (does the point of origin of the x app need to have X running as well - and what does this mean in a vm which is a non-graphicla environment?).
Anyway, I try to run (from remote to local) xclock and get the typical
Error: Can't open display.
Fedora Installation :: How To Enable 3D Mode In 15
Jun 14, 2011The first time I started F15 the following notice appeared (approx.: I have translated it from spanish):Quote:Unfortunately GNOME 3 failed on having started and it is now in alternative mode. It probably signifies that your system (graphic hardware or controller) is not capable of executing GNOME 3 complete.Computer data: AMD Athlon XP 2400+ 2,01GHz; 1.5 GB RAM; ATI Radeon 9200SE. Fedora 15.I have checked in several pages of the net that Radeon 9200SE is able to support 3D.I should like to modify the Open Source Xorg to enable the 3D mode (not to install the proprietary drivers, this will come later if there is not another solution), but I don't find the /etc/X11/xorg.conf. There is the /etc/X11/xorg.conf.d
View 10 Replies View RelatedUbuntu :: 'Unable To Mount Location Failed To Retrieve Share List'
Nov 21, 2010I want to install my printers onto this laptop. Both (2 laserjets-named "hplj2200" and "BrotherHL3040color")are "locally connected" via USB to a PC in another room (winxp pro) windows network is "workgroup" PC with printers attached is "philmainpc". Places>Network instantly sees WINDOWS NETWORK, click > WORKGROUP click> opening network> Unable to mount location Failed to retrieve share list. System>Admni>Printing>ADD>Network Printer>Windows Printer via Samba>Browse> workgroup philmainpc Doubleclick, wait for awhile and then nothing. I have tried manually typing in smb box "workgroup/philmainpc/"shared name of printer" and again nothing. In synaptic manager I added smbfs etc.
View 7 Replies View RelatedCentOS 5 Networking :: Unable To Retrieve Software Information
Feb 26, 2010When I attempt to add software i get the following error:
Unable to Retrieve Software Information
This could be caused by not having available connection.
Cannot find a valid baseurl for repo: addons
To get my browser to work properly, I have to specify a proxy (manual) and use the IP address of our proxy server. After this, I'm able to get out through the internet
using my browser. Not sure why I fail to get software updates though. I used the same setting in Proxy - Control Center. Repository Manager show's CentOS-5 - Addons mirror list as :
[URL]
..and I can get to the site with the browser.
Networking :: Elinks Error: Unable To Retrieve Web Page?
Jul 19, 2010Before i configured proxy server elinks open web pages. I configured squid proxy server but the elinks display error Unable to retrieve web page. squid running successfully but configuration not working My Configuration isacl mynet 192.168.1.9/255.255.255.0 http_access deny mynethis simple configuration is not working i dont know what i put wrong.Note : Centos 4 running as a guest Operating System in windows xp(Microsoft Virtual PC 2007)
View 1 Replies View RelatedCentOS 5 Server :: KickStart Unable To Retrieve Stage2.img
Sep 14, 2010I recently set up a kickstart server using Centos 5. I copied all 7 of the centos 5 install cd's to the tree. I made the install cd, it boots fine. I'm using http, when I'm prompted, I put in the web site: 1.1.1.1 and the Centos directory of /network-install/RPM
I get the following error:
Unable to retrieve [URL]
I've been told the double slashes after the ip address is not a problem, and I've tested that through a browser, by browsing the same location. (not sure if
that's a valid test, but it did find the directory and display the files.)
CentOS 5 Networking :: Unable To Retrieve Software Information?
Nov 19, 2010I'm on a corporate network .
When I attempt to add software i get the following error:
Unable to Retrieve Software Information This could be caused by not having available connection.
Cannot find a valid baseurl for repo: addons
To get my browser to work properly, I have to specify a proxy (manual) and use the IP address of our proxy server. After this, I'm able to get out through the internet using my browser.
Not sure why I fail to get software updates though. I used the same setting in Proxy - Control Center.
Repository Manager show's CentOS-5 - Addons mirror list as :
[URL]
..and I can get to the site with the browser.
Ubuntu Networking :: Enable Promisuas Mode In Packet Sniffing?
Nov 5, 2010I am running wireshark on my laptop. It is only showing me the packets addressed to and from it, and broadcast packets. I am running it in promiscuas mode, and in iwconfig set the interface to mode monitor. However it can still not see packets from my other laptop. They are in the same room, both wirelessly connected to the same network.
View 2 Replies View RelatedGeneral :: Enable Gtk Themes When Ubuntu Started In Xterm Mode?
Aug 5, 2010i booted up my Ubuntu 10.04 and at the login promt I changed from GNOME to xterm session. Then i logged in and opened my programs and it didn't have the gtk theme enabled that i have when I start my ubuntu in GNOME session mode. How do i enable gtk themes there so everything looks pretty again? I like starting from xterm because it's very fast..
This is how it looks, notice the ugly buttons and everything... the gtk theme is not loaded and i don't know how to enable it..
[URL]
And here i will show you how it should look and how it normally looks with the gtk theme loaded up... basically i would like it to look like this even when i start it from xterm..
[URL]
Really, I would like to know how i can enable gtk themes when I run my computer in xterm session mode. Is there another application that i have to run? I don't want to run the full GNOME environment, i really don't.
Ubuntu :: Unable To Mount Location: Failed To Retrieve Share List From Server
Mar 19, 2010I am running Ubuntu 9.10 on VMware Player and wish to access my Windows files inside Ubuntu. When I go to Place -> Network there exists a folder called Windows Network. When I try to open it I get the message: Unable to mount location: Failed to retrieve share list from server
View 1 Replies View RelatedUbuntu Networking :: 10.04 Unable To Mount Location: Failed To Retrieve Share List
Jul 20, 2010I have recently put Ubuntu 10.04 LTS on a lab computer for use as a file server, but I cannot seem to get our Windows computers to see the Ubuntu share or vise versa.
I right clicked the folder, said share, and did the samba install.I edited the samba smb.conf file per the discussions here, I edited the nsswitch.conf file per the discussion here, I installed winbind, I disabled the firewall, and I rebooted and tried tearing down the share and re-sharing. Nothing seems to work. When I try to access the folders on the windows computers, I get "Failed to retrieve share list from server". When I try to access the ubuntu machine from Windows I get nothing. I have done a ping from each machine to the other and they have no trouble. As far as I know there are no firewalls between the two computers as the Windows computers can see each other's shares just fine and I've never had issues with ports getting blocked with any of our experiments.
The workgroup for all of the Windows machines is UEDA_LAB and I made that change in smb.conf as well as putting the computer name love218-legolas.
I have attached my smb.conf and nsswitch.conf files.
My main goal is to get the ubuntu folder seen by the Windows computers (for read/write/etc) so that it can be used as a file server.
Ubuntu Multimedia :: Unable To Retrieve Audio CD Information After Installing Restricted-extras?
Sep 5, 2010I've got Ubuntu 10.4 and have been using Rhythmbox to play CDs. When I put a CD in it would always be recognised and Rhythmbox would display the artist and song titles. Today I installed the following package:ubuntu-restricted-extrasThis was so I could rip CDs to MP3s. This worked, however it seems to have also had the side effect of preventing Rhythmbox from retrieving information about audio CDs. If I run Rhythmbox from a shell I get the following debug:
** (rhythmbox:2271): DEBUG: Loading the real store page
** (rhythmbox:2271): DEBUG: navigation requested to https://one.ubuntu.com/music/store-no-token
[code]....
Ubuntu :: Unable To Mount Location; Failed To Retrieve Share List From Server
Oct 18, 2010My network was running happily with no problems. After clicking "Places," then "Network," I double-clicked "Windows Network." My wife's laptop appeared merrily ready to be clicked. I browsed through and accessed the "Public" folder. Ubuntu auto-mounted the "Public" folder on the Windows Vista machine to the desktop. All was well.
I wanted to change the icon to a disk so it would mimic a "mapped" drive like in Windows. I right-clicked the shared folder mounted on the desktop, clicked "Properties," and then clicked the picture of the folder. I then clicked through to "/usr/share/icons/Human/scalable/devices" and selected the "drive-harddisk.svg" icon. The icon changed and I could still browse. I unmounted and re-mounted the folder with no problems, then changed back the disk to the regular folder icon.
After restarting the computer, if I click "Places," then "Network," then double-click "Windows Network," I'm greeted with the following error message:
Unable to mount location. Failed to retrieve share list from server.
WORKAROUND: Opening Firefox and typing smb://IP-of-wife's-laptop shows the share list. I can open and access the "Public" folder no problem.
Ubuntu Networking :: Unable To Mount Location Failed To Retrieve List From Server
Jun 18, 2011I keep getting this, ever time I try to map a shared drive on other systems with my small network. 'unable to mount location failed to retrieve list from server'. This used to work.
Main System UNBUNTU 10.10, GNOME ver. 2.32
Sys2 Windows XP Pro, SP3
Sys3 Windows XP Home SP3
[code]....
Mine is used as a server for the above, and also for me to work on. For some reason, I keep getting permission failure. Setting up a share on sys2. sys3, sys4, sys5 can see and read it. My main sys cannot. None of the systems can see the Main one & the main one cannot read any of the others.
Chain ufw-after-forward (1 references)
target prot opt source destination
Chain ufw-after-input (1 references)
[code]....
Programming :: Enable CTRL+C (to Terminate The Program) While Still Have RAW Mode?
Jun 2, 2010changed terminal into raw modecfmakeraw(&termios);After that terminal no more captures CTRL+CIs there a way to enable CTRL+C (to terminate the program) while still have RAW mode?
View 3 Replies View RelatedUbuntu Networking :: Unable To Mount Location; Failed To Retrieve Share List From Server
Oct 18, 2010My network was running happily with no problems. After clicking "Places," then "Network," I double-clicked "Windows Network." My wife's laptop appeared merrily ready to be clicked. I browsed through and accessed the "Public" folder. Ubuntu auto-mounted the "Public" folder on the Windows Vista machine to the desktop.
THE REASON:I wanted to change the icon to a disk so it would mimic a "mapped" drive like in Windows. I right-clicked the shared folder mounted on the desktop, clicked "Properties," and then clicked the picture of the folder. I then clicked through to "/usr/share/icons/Human/scalable/devices" and selected the "drive-harddisk.svg" icon. The icon changed and I could still browse. I unmounted and re-mounted the folder with no problems, then changed back the disk to the regular folder icon.
THE PROBLEM: After restarting the computer, if I click "Places," then "Network," then double-click "Windows Network," I'm greeted with the following error message: Unable to mount location. Failed to retrieve share list from server.
WORKAROUND: Opening Firefox and typing smb://IP-of-wife's-laptop shows the share list. I can open and access the "Public" folder no problem.
Ubuntu Networking :: Unable To Mount Location - Failed To Retrieve Share List From Server
Sep 1, 2011It seems this is a common problem. I used Samba to configure and connect the computer running Ubuntu 11.04 with my Windows Visa workgroup. This is a wired, not wireless, connection.
In Ubuntu, under Network, I can see the name of the other computer (NOVA_MORAI), but when I click, I get the error:
Unable to mount location - Failed to retrieve share list from server
I tried the nmblookup command, here is the output:
eleos@Planet-Morai:~$ nmblookup NOVA_MORAI
querying NOVA_MORAI on 192.168.1.255
192.168.1.2 NOVA_MORAI<00>
And:
eleos@Planet-Morai:~$ nmblookup -A 192.168.1.2
[Code]....
There it it. But when I try the findsmb command, it does not show up.
The error message seems common, but I have been trying solutions all day, and I am still not getting a connection.
Ubuntu :: Buffalo NAS - Unable To Mount Location - Failed To Retrieve Share List From Server
Mar 20, 2011I have a Buffalo Link Station NAS. I can connect to the NAS via my browser and set up users and groups, but I can't get contact through Network.
If I open Shortcuts and select a folder, the Network icon shows in the left pane. Clicking Network opens the folder and Windows Network icon shows.
When I click on the icon, eventually, this message appears - Unable to mount location- Failed to retrieve share list from server
I did have this unit working some time ago under Ubuntu, and then we changed IP to Virgin and have a new cable router.
Ubuntu :: What Does Network Service Discovery Disabled Mean?
Nov 28, 2010Every time i boot up i get an annoying message that says: Network service discovery disabled.
View 1 Replies View RelatedRed Hat :: Unable To Boot RHEL 5.2 And Unable To Mount Root File System In Rescue Mode
Jan 28, 2010Environment: A 32-bit kernel RHEL5.3 system running on a virtual machine. The root(/) filesystem is on an LV.
Issue: Unable to resize the FS after extending the root LV since it is mounted. After extending the LV, online resizing of the FS was not supported and the root filesystem could not be unmounted while it was in use. On rebooting, I got a kernel panic error. In runlevel 1, I couldn't run chroot, couldn't find the /etc/fstab, root FS could not be mounted, fsck did not run (tried block 31 for second copy of superblock using dd count=1 bs=4k skip=31 seek=1 if=/dev/sda2 of=/dev/sda2), couldn't find any rpm on installation media to install unix-utils rpm. On running commands in runlevel 1,
I got the following output.
Fedora Networking :: Unable To Mount Location - Failed To Retrieve Share List From Server
Aug 20, 2009My network has several machines on it. They are all connected to a single router. Two of the machines are running Windows Vista, one Windows XP and one Fedora 11. When I go to places.network, I see an icon that says Windows Network. If I click on it, I get the message: Unable to mount location, Failed to retrieve share list from server. When I had Ubuntu running on this machine, I had no problem seeing and connecting to the Windows Vista machine.
View 11 Replies View RelatedUbuntu Installation :: Update -network Service Discovery Disabled?
Jan 2, 2010When I ran updates and installed 9.10, this message appeared, "Network service discovery disabled. Your current network has a .local domain, which is not recommended and incompatible with the Avahi network service discovery. The service has been disabled." The computer will not respond to anything, completely frozen--I am not able to open any programs and the CPU itself seems to be running loudly.
View 1 Replies View RelatedUbuntu Networking :: Disable ICMP Router Discovery For IPv6?
Jan 14, 2010I set up a static IPv6 address and a gateway in /etc/network/interfaces. However, a bad router in my network environment alway send wrong ICMP router discovery messages to me. So I have got extra (wrong) IPv6 address and gateway, and the routing is confused. On Windows Servers, I can use "netsh interface ipv6 set interface "Local Area Connection" routerdiscovery=disable" to disable ICMP router discovery. But I don't know how to disable it on Ubuntu 9.10. How could I disable ICMP router discovery for IPv6?
View 4 Replies View Related