I am an emacs user, and I noticed that on my new machine (running F15, 64bit) flyspell-mode will not work in tex mode.
I get errors that look something like this:
Code:
Spell-checking inequality-model.tex using hunspell with default dictionary...
Spell-checking region using hunspell with default dictionary...done
ispell-send-string: Process ispell not running
When done with a buffer, type C-x #
code....
I had Emacs installed in Fedora 11 and want to run it text-mode,but everytime when I type emacs command in gnome terminal,an emacs graphical window pop up. I want to emacs to back to text-mode by typing M-x text-mode, and it doesn't work.Can emacs run in text-mode in X11 environment?
View 2 Replies View RelatedI usually develop python code with emacs, emacs being in python code. On my desktop a version is installed and/or configured that way, so I easily can choose a region in the code and simply click on a menu option to comment out this block of code (i.e. at the begin of each line in the selected code two '##' are put). That is very convenient.
However, on my Laptop, running F12 and emacs 23.1.1, this menu option is missing! I searched within google and found the hint that by pressing 'C-c #' I also can comment out a selected region. But on my emacs it says: 'C-c # is undefined'. Am I missing something? Anyone any idea how to fix/install/update/solve this problem, so I can easily choose a couple of python lines and comment them out?
emacs has these 2 mode for spell checking.
M-x flyspell-mode
Enable Flyspell mode, which highlights all misspelled words.
M-x flyspell-prog-mode
[code]....
I'm using 11.04. The agenda command C-a a a (agenda for current week or day) isn't working. When I press C-c a, it tells me that it doesn't know that command...
View 2 Replies View RelatedBelow is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
I am just starting out with ubuntu.
I downloaded emacs, and wanted to use php-mode, so i downloaded something called php-mode. I would have posted a link, but this forum restricts me from doing that.
Inside are a bunch of files, and no readme. I tried to ask google how to install this, but found nothing that made sense to me (i am still a n00b).
Is it possible to get vim insert mode in Emacs?
View 2 Replies View RelatedI just updated to emacs23 from emacs22 (sudo apt-get install emacs2). I find that I now have a problem with org mode structured lists not appearing. A single asteriks on a line by itself no longer appears highlighted and no longer collapses and expands using the tab key.
View 2 Replies View RelatedI want to show line numbers automatically in bash scripts (a habit of being a programmer) and when I load an emacs lisp file it works from the command below but the following command that sets up the same thing for bash scripts doesn't work. I played around with this for quite some time and couldn't find anything that would make work.This is the first time I have tried to customize emacs so it could easily be something ignorant on my part.
;; Load additional packages
(load-file "~/.elisp/whitespace.el")
(load-file "~/.elisp/setnu+.el")
[code]....
I would like to delete a directory in emacs' dired-mode.
I mark the directory with the "d" key, and then hit "x" to deleted flagged.
I then get the following error:
Is there any way to get emacs to delete the directory and stop its whining?
I ssh connect with a remote machine and have to use emacs.But emacs run only in term-mode. does anyone have a solution how can i run emacs in graph mode in the remote machine
View 1 Replies View RelatedI want to use Emacs abbrev-mode to be able to replace certain programming symbols with their Unicode equivalents as I type. So, for starters, I added this to my abbrev_defs file:
Code:
(define-abbrev-table 'haskell-mode-abbrev-table '(
("->" "→" nil 0) ))
But it simply doesn't work when I am in abbrev-mode. No error message, the auto-abbreviation simply doesn't take place. If I adjust the above:
Code:
(define-abbrev-table 'haskell-mode-abbrev-table '(
("arrow" "→" nil 0) ))
Then auto-abbreviation works with the word "arrow". Why can't it auto-replace the symbol?
I am using GNU Emcas 23.2.1 in console mode on Konsole. It has white background colour. I want to change it to black.
View 3 Replies View RelatedI've a problem booting on my fc14 64 bit. I install it yesterday and everything was ok. Then I updated it and I installed wireless drivers kmod-wl equivalent to my kernel version that is 2.6.35.6-45. I've a pavilion dv6 with a broadcom ach. for networking. So the next step was installing kmod-nvidia for my nvidia geforce but after rebooting my never allow me to log in! I can se the tipical blue-white progress bar loading nvidia drivers but not else!
my screen freeze itself after the progress bar became white. I would resolve by rescue mode but I've installed fc14 64 b using a usb-pen drive and I find no way to do this from live version.
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies View RelatedI attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View RelatedMy linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.
My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.
I am a semi-noob on this and I have problems getting my emacs recognizing .tex as latex and even running latex-mode. Usually when you run latex-mode (M-x : latex-mode) emacs should switch to latex-mode, but nothing happens in my case. The menu bar still show the TeX options, highlighting remains the same etc.
I am running emacs 23.1.1 (x86_64-unknown-linux-gnu, GTK+ Version 2.10.4), this is on a university system so I don't know much about it.
> uname -a
Linux karakum 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 00:57:09 EST 2010 x86_64 x86_64 x86_64 GNU/Linux.
I ordered this USB 802.11n dongle for about $10 and am having problems.I found a firmware related bug (Bug #595455) that keeps it from working out of the box and got around that. I put the right firmware file in the right place and CAN CONNECT TO B or G Access Points.hen I put my AP in N-Only mode, I can see the network, but cannot associate. With the AP in mixed mode I can Associate using G.The most interesting thing I found was something that had very
few google hits (like 4). In the dmesg output after associating I see the message:
Successfully associated, ht not enabled(0, 1)The most interesting thing about this is the (0, 1) at the end.I don't know what that means but it seems like a clue as to what the problem is.This device uses the realtek chipset 8191S, there are conflicting reports on this, but all the reported possibilities seem to use the same driver from realtek (rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.2010 0625).Here is some random info:
Dmesg output:
[85082.620027] usb 1-3: new high speed USB device using ehci_hcd and address 6
[85082.754586] usb 1-3: configuration #1 chosen from 1 choice
[85082.755456] ==>ep_num:4, in_ep_num:1, out_ep_num:3[code]........
I played with the graphics in kde4 and seem to have losy my installation. i have tried the rescue system option, recover system options and in desperation (i was just about to reinstall) tried booting in failsafe mode, and it worked!
where do i go to find out what the problem is regarding the normal boot mode? i think my pc is starting to resent the continual use of the reset button!
I installed ubuntu 9.10/9.04 on my usb key as live image couple of time. I have trouble when I try to install wine on my usb key. I am wondering what is the difference if I install my ubuntu into my usb key directly? will that be slower compared with live CD mode? I guess live CD mode may use memory as part of harddisk to save temepory files and normal usb linux installation won't do this for me. Is this true?
If so, do I have a choice to point my tmp directory to system memory area?
When I first installed ubuntu 10.10, the display was for some reason tinted green and shifted a few inches to the right. After experimenting with the resolution preferences, I eventually got it to a large resolution (1280x720 ... or something like that) yet is was quite blurry. I found out that the problem was with my monitor after I switched it to TV mode, then back to PC mode. It became perfectly clear! All I had to do then was adjust the screen positioning by shifting it left a bit.
Even though I have made the resolution I figured out to be default, whenever I turn the PC on after shutting down, it goes back to the "green-and-to-the-side" mode. :/ Ain't really a big problem, until I tried to fiddle with the resolution preferences s'more.
Somehow, I have set it to be twice as wide of the maximum my monitor can display, went back to being green tinted for some reason, and is completely shifted left (yet the right side is still visible) This means that I cannot see what is going on the left side, and cannot adjust the resolution preferences, nor can I click blindly cuz the border is only around my visible side of the screen. Now it is stuck like this.
I've researched many hours and eventually found the terminal command for the resolution preferences. it popped up on the visible side. Although it was to no avail cuz I HAVE TRIED EVERY SETTING AND OPTION and absolutely nothing changed. I assume a system restore would simply revert it back to the previous satisfactory settings, but the thing is I want to FIX it. I am new to this terminal stuff, so I want to learn it and all that. To put it simply, here's what I want:
Learn how to manually adjust resolution without depending on a simple dialog box. Make the satisfactory resolution default and consistent through turning it on and off. Link that could teach me the essential commands, all this googling is stressful. D:
The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies View RelatedI was reading about ext3 feature and I have read about its journaling modes. I would like to ask what is the default journaling mode of ext3 fs in slackware(or is it in all distro using ext3)? I'll install slackware when my new pc arrive and the fs I will use will be ext3 and I like it to have data=journal mode for its journaling. I have read in some wiki how to set the journaling mode into data=journal mode.
Code: # tune2fs -O has_journal -o journal_data /dev/sdXY Do i need to issue this command or is this the default mode in ext3 in slackware?
I've looked today on my logs /var/log/message and I find device eth0 entered promiscuous mode I don't remember putting eth0 in promiscuous mode I'm connected to the net thru a router how do i turn that off ?
View 1 Replies View RelatedI accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies View RelatedI need boot in emergency mode (not single user mode), from docs:
[URL]
in red hat enterprise 5 it's ok, not in red hat 6.
I am getting a pop up window saying: "Not optimum mode. Recommended mode 1280 x 1024 60Hz" In my case, this is happening after installing Debian 504 AMD64, the Samsung "SyncMaster 940N" that gives this message or warning was working fine for a few years on another machine under the previous Lenny distro.
The only way to get rid of this unwanted pop-up window (the monitor is working fine) is to press the "AUTO" switch on the monitor, there is no such option in the menu of the monitor to disable anything or change the resolution and it seems to me that, unlike what was suggested as an answer in similar threads, the problem is not with the monitor but with the distro unable to detect the monitor properly. The only mention in the "xorg.conf" file is as follows and running "dpkg reconfigure ..." has no other effect than creating a new exact duplicate of the file.
Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
EndSection
It seems like everything is configured correctly but NTP will start, sync once or twice in the first hour, then never sync again.. Below are signif lines from my /etc/ntp.conf files.
Server:
----------
tos orphan 9
server BOGUS_1 # Must operate in orphan mode
server BOGUS_2
[Code].....