I used to configure and run PHP script in Redhat Linux System for a long time ago. Now I forgot almost everything in Linux. I downloaded and install Fedora 11 Live CD. Start httpd service(Appache). It does work with html but not PHP script. And I can't remember how to configure the system to interpret PHP script.
View 13 RepliesAh, this time you've really screwed it up without covering you traces: F14 does not interpret correctly my (possibly botched up) ACPI tables and HANGS!!! With acpi=off I have to press the power button to switch my desktop off and that is really ANNOYING. Surely the Fedora engineers could have done a better job with this one.
View 14 Replies View RelatedI have a number of errors captured by SELinux against NetworkManager - text of one of those is below. I'm not really sure how to interpret it
[code]...
I recently bought a Lexmark Interpret S405 printer, and the box says that it's compatible with ubuntu. I downloaded the lexmark-inkjet-09-driver-1.0-1.i386.rpm.sh, which begins installation but gives the error message The installer package is not supported by your native packaging system. The installer will exit. I also downloaded the Linux_S305_E.sh, which doesn't even begin installation. PLEASE HELP, I have two brand new Lexmark printers, (the other being an X5630) and they both refuse to install or i just have no idea how to install them.
View 9 Replies View RelatedI have been trying to configure webalizer on a centOS 5.5 system.I did the yum install and I found this helpful link...[URL]..However when I try to change the dir it puts the info into, it keeps giving me an error cannot cd to the directory. I changed the /etc/webalizer.conf file as described in the above article and try to run it manually same results.
/etc/cron.daily/00webalizer Error: Can't change directory to /home/webalizer/ When I put the original dir back in the path it writes to /var/www not /var/www/output like it should. I even tried a local /var/wwww/output dir. Then I tried a link to /home/webalizer/output (a dir I created) and same results.(with orginal .cfg in place) I go to my www page remote or on the local network I get page not found errors. http://mysite.com/webalize or 192.168.1.80/webalizer page not found.
In summary.
1. Why wont the /etc/webalizer.cf file allow me to change the location of the files?
2. How do I display the www page to view the data?
3. How can I secure the www page so only I can view the data.
just saw this in my email too :
header info deleted...
/etc/cron.daily/00webalizer:
Error: Can't change directory to /home/webalizer
/etc/cron.daily/logrotate:
Current logging target is:
`- SYSLOG
edit: i should also mention SeLinux is in permissive mode not enforcing while i am testing this.
I have loaded Fedora 10 in my PC and have configured the network (wired and wireless [Netgear Wifi Adapter] both). But I am able to make the hostname resolution work. configure the system?. I have unsuccessfully tried a lot of things.
View 4 Replies View RelatedIn order to get my Ubuntu system up and running on the Internet I need to install Sakis3g, and when installing, the system does not pick up ./Configure. My first thought was that the Build Essentials were not present but turns out that they are already installed, so now I'm at a dead end as I cannot finish my install. Has anyone else had any problems similar to this one?
View 2 Replies View RelatedHow to configure RAID 1 (hardware RAID 1 or Software RAID1 ) after installation of operating system : RED HAT ENTERPRISE LINUX 5.3 SERVER
View 9 Replies View RelatedThe problem is that he did not specify exactly where in /etc/profile. I am trying to make a custom spin of F12 but I cannot do it behind the proxy as it is now.
View 4 Replies View RelatedI have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
i am getting the following errors when i was using iNSPect
[root@localhost iNSpect_4_beta_3]# ./iNSpect -c out.conf -l2 out4.tr
WARNING: packetString in config file not set. Using default of " ".
WARNING: simulationSpeedAtInit in config file not set. Using default of ".01".
WARNING: simulationSpeedMinimum in config file not set. Using default of ".005".
[code].....
It looks like I have one hard drive (30 GB) with three partitions, but df says my primary partition is under 9 GB? Shouldn't it be much larger?
Code:
$ sudo fdisk -l
Disk /dev/sda: 30.0 GB, 30020272128 bytes
255 heads, 63 sectors/track, 3649 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0004b8d0 .....
I am using Linux as my OS and using TOP command to measure the system performance. From the readings using the TOP, I have observed the following
(1) The used memory increase significantly from 7% to 99% over sometimes? Is there a sign of memory leak? Does OS play a part in used memory? Will system performance be affected? Will system crash due to 99% used memory?
(2) What is the difference between Memory Buffers and Cached?
(3) From the readings, it was observed that Buffers readings decrease, whereas Cached readings increase over time.
(5) Should TOP be used to take readings for system performance (memory & CPU usage)? What is the recommended method to take readings?
Whereas, my applications only consume a bit of memory and CPU.
I have installed Ubuntu 11.04, 64 bit and now I am trying to install/configure MFC-7420 scanner part (printer works fine)I tried to follow the steps listed at http://ubuntuforums.org/archive/index.php/t-590793.html, but I don't have etc / udev / rules.d/45-libsane.rules file to edit and can not continue with the remaining steps of the guide.
I also tried to follow the steps provided by the Brother Solution Center http:[url].... I have downloaded brscan2 64 bit and installed without error but when I tried to install the brscan-skey-0.2.1-3.amd64.deb using >sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb I get the following error:
************************************************** **************************************************
sudo dpkg -i --force-all brscan-skey-0.2.1-3.amd64.deb
[sudo] password for aUser:
dpkg: warning: overriding problem because --force enabled:[code].....
Which dependencies am I missing? or What am I doing wrong?
I access a linux server shell via putty, but many of the keys I use do not translate across, up, down, left and right all are seen as ^[[A, ^[[B, ^[[D and ^[[C; But so is C-up, C-down, C-left and C-right. And enter is seen as C-j (which move down to the next line), and backspace is seen as C-h, which is backwards delete.
How can I stop these keys being translated into other keys (so I can, for example, configure C-h and backspace to perform two different functions) and what's doing this translation (Putty, the kernel, the shell)?
I've got rkhunter installed and regularly do scans immediately before & after updates & if I get warnings about 'file property updates' after the update I use 'rkhunter --propupd' to give me a clean run.I'm about to setup a ubuntu computer for my nan, I want to enable automatic security updates so she doesn't have to do anything to keep her system secure. I was planning on running rkhunter when I go to her house (about once a month) and check the dates in the resulting rkhunter.log warnings with those in the var/log/apt/history.log to see if legitimate updates caused any rkhunter warnings. I've noticed though that the 'Current file modifiation time:' in the rkhunter.log warnings are incorrect.
My system seems to be about 15 days behind the actual date, I've now run rkhunter --propupd so I have no warnings but got this one off another forum post to show what I mean:
Current file modification time: 1283341157 (01-Sep-2010 06:39:17)
I believe that the '1283341157' is the time in some strange format and the date in brackets is what rkhunter thinks it might be in human format.
1) How to interpret the 'strange date format' (1283341157 in the line above)?
2) If there's a way of configuring the date in rkhunter so that they're correct in rkhunter.log?
3) If there's a better way of keeping her system up-to-date & secure, it's her first computer & she's 86 so I think setting up automatic security updates is the way to go, it'll be one less thing to overwhelm her!
I'm having trouble with a bash script. I have something like this:export VAR=`command`The problem is that "command" can return this: "** NONE **". bash will then replace each of the * by the list of files in the current directory.I want the output to be uninterpreted (i.e. VAR should contain "** NONE **", not "list of files list of files NONE list of files list of files"). It shouldn't be hard but I am unable to figure it out, and I'm not sure how to phrase the problem,
View 1 Replies View RelatedI've got a system that is maxing out CPU. Running "mpstat -P ALL 3 5" shows the following.
Quote:
08:30:21 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
08:30:24 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1001.00
08:30:24 PM 0 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1001.00
[code]....
All 5 groups show the same. My first question is why would CPU0 be the only one with intr/s and the others do not? Info.The OS is RHEL 5.4 running as a VM on ESXi 4.1. Memory doesn't appear to be an issue, the system has 8 GB and its only using about 1.5 GB. Second question, I'm positive the process that is the problem is the tomcat process. Does anyone know a good way to see whats happening with a specific process?
GNU assembler 2.17 And without having to prefix them. I'm skimming through as info page and can't find any pseudo operator or assembler directive of this type. E.g. 74 would be a decimal number. But I want it to be hexa 74 without the need to write 0x74.
NOTE: as is the GNU assembler.
EDIT: Google led me to discover this:
Quote:
If you write numbers without an explicit indication of the base, the most recent `.RADIX S' command determines how they are interpreted. However, on the one hand, it says the most recent and, on the other one, it applies to GASP, the GNU assembler preprocessor. IDK if it is the same as as (the GNU assembler).
I wanna switch to Fedora on my office laptop. I have figured most my app's alternatives. But I just can find a app or a way to configure my exchange based email system "natively".
View 1 Replies View RelatedI have a hp2100 printer that Fedora 11 recognized but won't print. I get this :
[davek@localhost ~]$ su
Password:
[root@localhost davek]# hp-setup
[code]...
Does anyone have experience install,configure zabbix on Fedora. I already install using yum but i don't know how to configure. I already install zabbix agent, zabbix server but don't know how to configure.
View 1 Replies View RelatedI found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
I want to install a program from this website http:[url].... and i download the option " hydra-6.3-src.tar.gz".i tried following the instructions on this page: https:[url].... but when i get to the ./configure step it says "bash: ./configure: No such file or directory"
View 9 Replies View RelatedI am using Fedora 10 kernel 2.6.29.1-36.fc10.i686
I have installed the following packages
When I try to configure alsa, I got the following error:
I'm trying to use the Boot.Fedoraproject.org (bfo) solution to install Fedora 13.
As soon as boot starts it tries to connect to net0 device which faults.
The point is that net0 seems to be my wlan device whereas the LAN connection is defined as net1.
I'm able to break the sequence (ctl-B), open the LAN connection (ifopen net1) and even 'dhcp net1' which results in an 'OK'. (At this point I'm not sure of the real result as I don't see my IP)
In any case so far I can't follow as I don't know the commands I had to put (set. chain, ...). Neither I know how to return control to the original sequence (if it were possible).
I'm trying to install open-vm-tools-2010.08.24-292196 on Fedora 13. I've downloaded the tar and extracted it into /tmp/open-vm-tools-2010.08.24-292196. I then run ./configure and I get:
I have icu and libicu installed. I've done a find across the whole filesystem and sure enough I don't have an icu-config file. There doesn't seem to be an icu-devel package - at least I can't find it if there is.
how install and configure the apollo + ares??
View 2 Replies View Relatedi tried to install f13 from live cd and failed. i have 2 questions. i do not understand how to setup partitions according to scottro's message. It says you need small ext3-formatted /boot partion and a ext4-formatted root partition. Does this configuration have to be setup before you boot into the live cd? If so, please tell me how to set this up. my pc is pentium d with 2 hard drives. The master hd is has xp, ubuntu8.04, and swap partitions. I would like to use one-half of the slave drive for f13.
Second question. I would like to be able to verify download of fedora-13-i686.iso. I downloaded it to my xp partition and installed Windows MD5summer. Where or how do i get the md5 file for this iso file?
How to configure openssh, /etc/sshd_config on a new installation of Fedora Core 14? [since tt does not work right out of the box, I cannot ssh into it]
View 2 Replies View Related