i am getting the following errors when i was using iNSPect
[root@localhost iNSpect_4_beta_3]# ./iNSpect -c out.conf -l2 out4.tr
WARNING: packetString in config file not set. Using default of " ".
WARNING: simulationSpeedAtInit in config file not set. Using default of ".01".
WARNING: simulationSpeedMinimum in config file not set. Using default of ".005".
[code].....
GNU assembler 2.17 And without having to prefix them. I'm skimming through as info page and can't find any pseudo operator or assembler directive of this type. E.g. 74 would be a decimal number. But I want it to be hexa 74 without the need to write 0x74.
NOTE: as is the GNU assembler.
EDIT: Google led me to discover this:
Quote:
If you write numbers without an explicit indication of the base, the most recent `.RADIX S' command determines how they are interpreted. However, on the one hand, it says the most recent and, on the other one, it applies to GASP, the GNU assembler preprocessor. IDK if it is the same as as (the GNU assembler).
Ah, this time you've really screwed it up without covering you traces: F14 does not interpret correctly my (possibly botched up) ACPI tables and HANGS!!! With acpi=off I have to press the power button to switch my desktop off and that is really ANNOYING. Surely the Fedora engineers could have done a better job with this one.
View 14 Replies View RelatedIt looks like I have one hard drive (30 GB) with three partitions, but df says my primary partition is under 9 GB? Shouldn't it be much larger?
Code:
$ sudo fdisk -l
Disk /dev/sda: 30.0 GB, 30020272128 bytes
255 heads, 63 sectors/track, 3649 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0004b8d0 .....
I am using Linux as my OS and using TOP command to measure the system performance. From the readings using the TOP, I have observed the following
(1) The used memory increase significantly from 7% to 99% over sometimes? Is there a sign of memory leak? Does OS play a part in used memory? Will system performance be affected? Will system crash due to 99% used memory?
(2) What is the difference between Memory Buffers and Cached?
(3) From the readings, it was observed that Buffers readings decrease, whereas Cached readings increase over time.
(5) Should TOP be used to take readings for system performance (memory & CPU usage)? What is the recommended method to take readings?
Whereas, my applications only consume a bit of memory and CPU.
I have a number of errors captured by SELinux against NetworkManager - text of one of those is below. I'm not really sure how to interpret it
[code]...
I access a linux server shell via putty, but many of the keys I use do not translate across, up, down, left and right all are seen as ^[[A, ^[[B, ^[[D and ^[[C; But so is C-up, C-down, C-left and C-right. And enter is seen as C-j (which move down to the next line), and backspace is seen as C-h, which is backwards delete.
How can I stop these keys being translated into other keys (so I can, for example, configure C-h and backspace to perform two different functions) and what's doing this translation (Putty, the kernel, the shell)?
I've got rkhunter installed and regularly do scans immediately before & after updates & if I get warnings about 'file property updates' after the update I use 'rkhunter --propupd' to give me a clean run.I'm about to setup a ubuntu computer for my nan, I want to enable automatic security updates so she doesn't have to do anything to keep her system secure. I was planning on running rkhunter when I go to her house (about once a month) and check the dates in the resulting rkhunter.log warnings with those in the var/log/apt/history.log to see if legitimate updates caused any rkhunter warnings. I've noticed though that the 'Current file modifiation time:' in the rkhunter.log warnings are incorrect.
My system seems to be about 15 days behind the actual date, I've now run rkhunter --propupd so I have no warnings but got this one off another forum post to show what I mean:
Current file modification time: 1283341157 (01-Sep-2010 06:39:17)
I believe that the '1283341157' is the time in some strange format and the date in brackets is what rkhunter thinks it might be in human format.
1) How to interpret the 'strange date format' (1283341157 in the line above)?
2) If there's a way of configuring the date in rkhunter so that they're correct in rkhunter.log?
3) If there's a better way of keeping her system up-to-date & secure, it's her first computer & she's 86 so I think setting up automatic security updates is the way to go, it'll be one less thing to overwhelm her!
I used to configure and run PHP script in Redhat Linux System for a long time ago. Now I forgot almost everything in Linux. I downloaded and install Fedora 11 Live CD. Start httpd service(Appache). It does work with html but not PHP script. And I can't remember how to configure the system to interpret PHP script.
View 13 Replies View RelatedI'm having trouble with a bash script. I have something like this:export VAR=`command`The problem is that "command" can return this: "** NONE **". bash will then replace each of the * by the list of files in the current directory.I want the output to be uninterpreted (i.e. VAR should contain "** NONE **", not "list of files list of files NONE list of files list of files"). It shouldn't be hard but I am unable to figure it out, and I'm not sure how to phrase the problem,
View 1 Replies View RelatedI've got a system that is maxing out CPU. Running "mpstat -P ALL 3 5" shows the following.
Quote:
08:30:21 PM CPU %user %nice %sys %iowait %irq %soft %steal %idle intr/s
08:30:24 PM all 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1001.00
08:30:24 PM 0 100.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 1001.00
[code]....
All 5 groups show the same. My first question is why would CPU0 be the only one with intr/s and the others do not? Info.The OS is RHEL 5.4 running as a VM on ESXi 4.1. Memory doesn't appear to be an issue, the system has 8 GB and its only using about 1.5 GB. Second question, I'm positive the process that is the problem is the tomcat process. Does anyone know a good way to see whats happening with a specific process?
I recently bought a Lexmark Interpret S405 printer, and the box says that it's compatible with ubuntu. I downloaded the lexmark-inkjet-09-driver-1.0-1.i386.rpm.sh, which begins installation but gives the error message The installer package is not supported by your native packaging system. The installer will exit. I also downloaded the Linux_S305_E.sh, which doesn't even begin installation. PLEASE HELP, I have two brand new Lexmark printers, (the other being an X5630) and they both refuse to install or i just have no idea how to install them.
View 9 Replies View RelatedI am unable to find a description of alsa's programing language, this sort of stuff:
[Code]...
I need to know what, for example, 'ttable' means and what is its syntax. This seems to be a state secret.
time a.out
106.130u 0.000s 1:46.28 99.8% 0+0k 0+0io 83pf+0w
As per my understanding of the man page:
the first value is the time since the code execution started and ended,
the second values is the time spent in usermode
the third one being in kernel mode
Is the 99.8% indicating time spent in kernel mode?
Also, what does this indicate?
0+0k 0+0io 83pf+0w .
The program definitely takes more than a minute to execute - then why is the first value so small?
To understand the output of rpm -Va on my server?
The last few lines look like this:
Code:
I know that "c" means configuration file.
The man page explains the other codes
Quote:
But here's my question. Should I worry about rpm reporting so many file changes? And is there anything I should do?
This is a dedicated server. The host reformatted and reinstalled the software on August 24. A lot of the listed files are like this:
It looks as though the files weren't pulled from the repository but installed some other way by my host?
1.What character instructd the shell to interpret a special character as an ordinary character?
2.What directory contains some of the utilities available on the system in the form of binary files?
3. What command is used to search the location of a utility?
4. What command is used to instruct the editor to write the file and quit the editor?
5. What key quits the more utility and displays the shell prompt?
6. What command starts a child shell as the super user, taking on root's identity and environment?
7. Which wildcard characters can be used for searching all the files in the system that start with "A"?
8. The user name or login name of the super user is????
[Code]....
I am using glib version 1.2.10.I came to know from somewhere that "pthread_attr_setaffinity_np(3)" does not work on this version for POSIX threads. Following error was coming:(.text+0x112): undefined reference to `pthread_attr_setaffinity_np'collect2: ld returned 1 exit status.All I want to do is to run 2 threads on two different processors. I cannot change the glib version.
View 3 Replies View RelatedJust installed Fedora 14. I wanted to try "Hello World" with perl. But where is it?
Code: [user]@user bin]$ ls
Running into a weird issue when packing sockaddr_storage with either v4 or v6 address. To demonstrate the problem, I created a sample test program (limiting it to v4 only addresses). The problem was observed on MAC OS 10.5.8 and Linux RHEL kernel 2.6.9-42 with gcc as the compiler.
* Function packAddrs() runs a for loop packing v4 addresses into a single structure. The input address is same for every iteration, output memory size is adjusted using realloc.
* After successfully packing an address, it prints the packed structure contents using displayPackedAddrs()
* The output is fine for first two iterations. However, at the 3rd iteration, the packed contents seem to have got corrupted. It prints only the first packed address. I have tried using (malloc and memcpy) instead of realloc but no improvement.
Included below is the code and execution output.
--------Test code
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
[code]...
I have problem to use an alias that defined in ksh93 script,in the functions in the same script onm Linux.I definied an alias in main: alias echo='echo -e' in order that echo will read backslashes but when i executed it in function, the alias didnt work, and performewd a regular echo, without -e
cat test.ksh
#!/bin/ksh
alias echo='echo -e'
checkUsage
[code]....
My new guy has created several functioning webpages on his machine with TOMCAT 6 with Sun JDK, yet our machines use TOMCAT 5.5 with Open JDK, which his webpages don't show. Do you have any idea how to make them work? The error showing in a browser:
Code:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception org.apache.jasper.JasperException: Unable to compile class for JSP:
[Code]...
I'm messing with a JTree, I need one that has checkboxes to check/uncheck options, and (later) textboxes to edit options....but for now, the checkboxes don't wanna play. Here's the source:
package Habitat.EnvCtrl;
import java.awt.BorderLayout;import MailPopper.hlprs.CheckBoxNode;
import java.awt.Dimension;
import java.util.Vector;
import javax.swing.JDesktopPane;
import javax.swing.JInternalFrame;
import javax.swing.JScrollPane;
import javax.swing.JTree;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.TreeNode; .....
The rtree builds (albeit I have a superfluous extra checkbox in there I don't know where it comes from...) but I cannot check/uncheck any boxes.
I work on Fedora 9 and I'm unable to compile my c++ program using the make in the terminal as well as in the IDE-Anjuta.although 'make' works fine with C programs,I get an error that g++ command is not found whenever I try it with C++ programs.
View 3 Replies View RelatedIn my application, we are using Publish/subscribe model implemented in JAVA and when I implemented it on windows to windows os,it is working fine and able to publish the right data and even when I am trying the same between two different OS i.e between Windows and Solaris sparc or opensolaris. I am getting the expected data.
But when I am doing the same thing with same code on Linux and any other OS,not able to publish data on other OS's but when I am publishing the data from other OS to Linux,I am getting the right data.
I have a centos 5.5 machine. I have forwarded both port 22 and 8080 on my router. I can connect on 22 via telnet ip 22 and even can remotely login into the machine. The problem when I start my java listener program which is listening on 8080 it cant not establish any connection (via telnet ip 8080). I have even add this into the iptables too -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 9000 -j ACCEPT. I have disabled the SELINUX too.
View 9 Replies View RelatedA sed mishap prior to a database import left me with a table name with, eh, well, this: Code: mysql> show tables;
+-------------------+
| Tables_in_someday |
+-------------------+
| day20101016 |
| day20101017); |
+-------------------+
I've corrected the sed mishap and imported the database the way it was intended Code: mysql> show tables;
+-------------------+
| Tables_in_someday |
+-------------------+
| day20101016 |
| day20101017); |
| day20101017 |
+-------------------+
But I can't seem to drop the table day20101017); because no matter how I seem to escape it it errors.
I'm creating a static lib via cmake,and when I view the .a binary file with less/more/cat I see functions from my time_tools.c, but not my other_api.c The directories structure is:
Code:
CMakeLists.txt
time/CMakeLists.txt
time/time_tools.c
time/time_tools.h
[code]....
I want to be able to disassemble a binary file, modify the assembly source, then assemble the modified assembly source back into a modified binary file. Purpose for this is pretty much just to play around with the Crackmes (www.crackmes.de) game.
Now, disassembly is easy, there are several tools that do it, including the standard objdump with the -d argument. However, how would you assemble an assembly source file created with objdump -d? GCC for sure doesn't want to assemble it in that format. What program, script, or arguments to GCC (none that I can think of) can be used to accomplish this? If someone also has some good tips for tools in general for Crackmes beyond what is standard in GNU/Linux I'd love to hear about it.
I'll post the entire code here, and then specifically highlight what is just failing in a fashion I'm apparently incapable of fixing a few hours later:
Code:
#!/usr/bin/expect
# The script should be called with a file in the directory called sshServerList
# That file has the following format:
# Line # | Contents of line
[code]....
I've had all kinds of different results and problems, but I've never been able to successfully log into multiple servers, though the first server in the list most times works okay (though might not on this iteration). I'm a bit hack and slash and I would be very greatful not only for a solution, but any tips on how I should have done this and places where I could clean up my code.
But unable to catch the SIGTERM signal if I do shutdown, as man pages says shutdown genrates the SIGTERM and SIGKILL signals, but we cant handle the SIGKILL signal. My code is working fine if I genrate the SIGTERM signal by Kill command, and also for SIGINT signgal genrated from the CTRL+c key.
Here is my code:
/* Example of using sigaction() to setup a signal handler with 3 arguments
* including siginfo_t.
*/
#include <stdio.h>
#include <unistd.h>
#include <signal.h>
#include <string.h>
[Code]...