Fedora Installation :: Fedora 10 White Screen Of Death
Apr 16, 2009
I've been trying to install Fedora 10 Core to a new my machine. The live CD appears to boot, but once I get beyond the selection stage (installing or running Fedora from the disk first), I invariably get a fully white screen. Nothing I've tried to do changes this. Although I'm reasonably experienced with the command line, I've never tried to do a GUI-less install of a full OS, and am unsure how/if to begin with Fedora. Any suggestions for either fixing the white screen of death, and/or installing from the command line would be a big help.
View 3 Replies
ADVERTISEMENT
Dec 4, 2009
I am a Linux newbie and did one successful install Ubuntu 9.1 32 bit on my old desktop. Encouraged by that success (and the ease of it), this week I built my own system, which will be my primary system. I am trying to install Ubuntu 9.1 (AMD 64 version) and after the partition selection screen (I chose to partition the entire disk), I immediately get a white blank screen. Then nothing happens. I also tried with Ubuntu 9.1 32 bit, XUbuntu 9.1 64, Ubuntu 9.04 all had the same results.
Not sure if the hardware specs are required, but here they are:
1) Motherboard: MSI KA 780 G
2) Processor: AMD Athlon II X4 630
3) Memory: Corsair 2 x 2 GB, 800 MHz twinx 6400 c6
4) Harddrive: Hitachi sata 300, 1 TB
In desperation, I have started windows XP installation and that seems to progress fine at its leisurely pace. Its formatting the drive right now. During one of the attempts, it did install something*, since after that I see a new ubuntu partition after that. But when I boot from hard disk I get a black screen with cursor. I tried to search thru the forums and nobody seemed to have this exact problem, one guy got a white screen with cursor after a graphics card install, which is not the same. I dont want to go back to windows.
View 11 Replies
View Related
Jan 7, 2009
I have a Gigabyte GA-MA790FX-DS5 with an AMD Athlon 64 X2 and 4GB RAM. The MoBo does not have embedded video. My main video card is a Diamond Radeon HD3650 PCIe. I was unable to initially install F 10 as the screen would blank out (Black Screen) after it would start Anaconda. I attempted to boot using the suggested option of nomodeset with no change of symptoms. I then switched out to an older PCI video card (NVIDIA GeForce FX5200) and was able to go through the install. Now I am attempting to switch back to my preferred card (HD3650) and just before the GDM screen appears the screen goes to solid white and no ability to switch to another VT. I have been unsuccessful at finding any workarounds for this. I thought the issues were with the older proprietary chipsets pre open source of ATI which was supposedly older than the R500 series, but I guess I'm wrong.
View 1 Replies
View Related
Jan 14, 2009
complete trying newbie trying to get to grips with linux. Tried ubuntu and didnt like that so someone suggested fedora. I'm having the same problem I had with ubuntu, I get a white screen when trying to load the graphical install after the media test. On ubuntu this was solved by selecting simple graphics mode. Here I have tried the following commands during install with still no luck
The text install just freezes after selecting the keyboard layout so that does not even work. Tried searching for forums but only solutions I could find where the previous.
View 7 Replies
View Related
Jan 25, 2009
I get a blank white screen when i try to bootup fedora and ubuntu to install them. I don't know whats wrong, any ideas?
View 1 Replies
View Related
Jan 27, 2009
I was able to install fedora 9 just fine. But now when I go to install fedora 10 right after the anaconda installer starts the screen goes white.
View 1 Replies
View Related
Jun 13, 2009
[code]...
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
View 6 Replies
View Related
Nov 7, 2009
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
View 2 Replies
View Related
Jun 4, 2009
Ive recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
View 4 Replies
View Related
Dec 4, 2010
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
View 3 Replies
View Related
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
May 1, 2010
I've installed almost every version of ubuntu so far and four different versions on this computer, and I've never had a problem with the installation cd. The install cd on this new version however gives me only a purple screen of death with a white line down the middle. What is going on? The ubuntu-10.04-desktop-i386.iso file's md5sum is fine. I've burned it successfully on two different discs and still I can't install it. I've got a Dell 6400 with an nvidia geForce 7300 video card.
View 9 Replies
View Related
Jan 29, 2009
I wanted to try F10 today so I downloaded the Fedora 10 64 Bit LiveCD but for some reason after it's done loading (the three colored loading bar), it hangs on a white screen with no sign of my computer thinking (no HDD LED activity and no CD ROM activity indicators flashing). Any clue how I could test the LiveCD without having to install Fedora (with text or otherwise..)? For the record, I have a 4870 1GB graphics card. I'm assuming that's fully supported, right?
View 3 Replies
View Related
Mar 9, 2011
I just finishing burning ubuntu on my laptop and was getting ready to partition my disk to allow space for ubuntu. I restarted my computer and when it was restarting ubuntu logo came up (as it booted from the disc). I was not wanting to install it at this moment so i was waiting for it to load then cancel it(just like a windows installation).It then froze and became pixelated with green and white colours.I thought it was nothing maybe just an error in teh disc. I waited 5-10 minutes then held the power button to shut it off. I then went to settings in the bios and changed it to boot from hdd first. After restart, windows began to load for like 3 seconds then blue screen. I dont know what went wrong or why this is happening.During installation of Ubuntu on my second try I keep getting:sudo: can't read /etc /sudoers: Input/Output errorsudo: no valid sudoers sources found, quittingWhat are the odds of me still having my windows 7 data?and could Hiren's boot cd help?
View 5 Replies
View Related
May 1, 2010
i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.
View 3 Replies
View Related
May 29, 2011
I run a live cd I downloaded, right? Everything goes fine - it installs with no real issues whatsoever, when all of a sudden after the install it boots to nothing but the famous black screen with a white, blinking dash.So, what do I do? It was installed on a Dell Inspiron 9300 laptop, and I ended up completely wiping the XP drive to do it
View 4 Replies
View Related
Jan 25, 2010
I just did a clean installation of Fedora 12 on my Intel Core2 Duo system. I installed packages to use compiz fusion. When I select the Compiz Fusion Icon option from the System Tools menu, my screen goes white, and I have to SSH into the system and reboot it
View 4 Replies
View Related
Oct 17, 2010
I'm running Fedora 13 (64-bit) on a Dell Inspiron 1525 laptop with integrated Intel graphics (lspci reports it as: 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)), and am having a strange problem with watching iPlayer in fullscreen.The video will work fine in the web browser at default size, and most times even in fullscreen as well, but sometimes on switching it to fullscreen the entire screen goes white with only the cursor visible. The sound keeps on playing and the cursor responds to mouse movements but I haven't been able to do anything to fix the screen (I tried bringing up a terminal and logging out, as well as doing a "compiz --replace" but neither had any visible effect - obviously I may have typed them wrong since the screen was white, but I tried multiple times). As mentioned above, I am using Compiz desktop effects, and also had to check the "Unredirect Fullscreen Windows" box in CCSM to get iPlayer to play video in fullscreen in the first place.
The annoying thing is that I haven't been able to consistently reproduce the error, in that sometimes it takes multiple attempts of going fullscreen and/or videos for it to occur. However, it has been pretty consistent in that it has only taken a couple of different videos to be played for it to happen (oddly I don't think I've had it happen on the first fullscreen attempt of the first video yet, but that might not mean anything).
View 14 Replies
View Related
May 31, 2011
On attempting to load GNOME 3 with Gnome shell, the screen fades to white, stalls for a minute, then gives an error and asks to log out. "Classic Gnome with Compiz" has numerous graphical glitches such as the background not refreshing (think Windows 95), among other things. How can I get GNOME Shell working again?
Gnome shell and classic gnome load fine under other users.
View 1 Replies
View Related
May 6, 2010
I initially had problems with the install CD giving the purple screen of death (a screen of vertical purple lines), however I managed to press F6 and set nomodeset and then add "xforcevesa no splash --" to the boot parametres (I guess) and I was able to boot into the live CD. Now however, I've installed 10.4 and I'm back to the purple vertical lines. My Dell 6400 laptop has an nvidia 7300 video card which must be the problem. My question is, how do boot into some kind of low graphics mode so that I can install the proper video drivers? I've been pressing shift to get to the grub menu, but the recovery mode only gets me the purple vertical lines as well, and I don't know what I'm doing.
View 7 Replies
View Related
Apr 28, 2011
I just upgraded from Ubuntu 10.10 to Ubuntu 11.04 Natty Narwhal and now I've got a purple screen of death. The download and install process all went okay, but when I restarted the computer through the upgrade dialogue to complete the installation process the system never came back online. When I turn on my computer it goes through the standard boot screen (F2 and F12 options shown while it boots the HDD, ODD, and wireless modem), and then it goes to a purple Ubuntu screen and doesn't do anything at all. I let it sit like that for 30 minutes before turning off the power and trying to boot again, but the same thing happened. I can press CTRL-ALT-DEL and the system will reboot, but nothing I know to do will get me past the purple screen and the Ubuntu logo. DI'm using a Dell Studio 1 desktop computer. It's got a 2.5ghz Pentium processer, 4gb of RAM, and a 400gb HDD. I don't dual boot, and Ubuntu is the only OS installed.
View 6 Replies
View Related
Aug 16, 2009
I install the fc11 from Fedora-11-i386-DVD.iso. The software update has just updated my fc11 kernel from 2.6.29.6-217.2.3.fc11.i686.PAE to 2.6.29.6-217.2.7.fc11.i686.PAE. If I boot using the new kernel, The screen resolution is not correct (everything gets bigger) and the screen goes into blank white screen suddenly after log in.
I have a geforce 8600gt card and installed its driver (for pae kernel) as suggested on this link: [URL]Everything goes well untill I update the kernel.
View 4 Replies
View Related
Oct 30, 2009
I followed leigh123linux' guide about the compiz fusion installation and set-up. Unfortunately, I failed to do a compiz-check before running the whole thing. I enabled compiz and did a reboot. The next time I logged in, my screen just turned white. I can still see my mouse moving though, but I couldn't disable the compiz.
View 11 Replies
View Related
Jun 22, 2009
When i log on to GNOME desktop a white screen is coming.so i am not able to see the desktop..So i always log in to kde desktop..Do i have to change something in x0rg.conf file...
View 4 Replies
View Related
Jan 24, 2010
I just did a clean installation of Fedora 12 on my Intel Core2 Duo system. I installed packages to use compiz fusion. When I select the Compiz Fusion Icon option from the System Tools menu, my screen goes white, and I have to SSH into the system and reboot it
View 2 Replies
View Related
May 26, 2010
I'm having no end of problems trying to get 10.04 onto my older Toshiba Satellite A50 laptop that I use as a spare laptop round the house. The laptop previously dual booted with XP and Xubuntu fine. I wanted to give Lubuntu a go to see if it's performance was better on this older hardware. When installing I got the black screen of death, and also got the same problem with the Xubuntu CD. Research pointed me in the way of this article: [URL] I was able to boot the Lubuntu Live CD using the instructions outlined in method A.
Once installed however I rebooted and Grub seemed to be knackered. Just sent me to a recovery console of which I had no idea what to do. As I could no longer boot into Windows either I reinstalled Xubuntu 9.10 and all was fine. I decided yesterday to give it another bash this time connecting to my wireless from the live cd hoping it would download an update to fix this problem. Nadda, Grub this time did show and I was able to boot into XP, but upon picking my Linux distro I now get an unrecognised device error with a long string of charachters and then it dumps be back into the grub menu, choosing the recovery mode version does the same thing.
View 6 Replies
View Related
Oct 24, 2009
I wanted to have some cool effects in my desktop and have just installed compiz fusion in fedora 11 (kde) but when i launch compiz fusion icon the screen just goes white and nothing appears.
My laptop is dell xps m1330.
View 5 Replies
View Related
Feb 16, 2010
I have re-installed Fedora 3 times, each time, after a little while of use, when I am botting it up, it loads up, and before the login screen appears, the screen just goes black, and I end up with just a black screen and a white line in the top left corner flashing, thus resulting in me not being able to log in. The exact same has happened a number of time
Could it be something I had installed? Also, whilst using it, on the third install, a few times a message appeared telling me there was a kernel error, could this be linked to the problem? I was running Fedora in GNOME, but I had KDE installed too.
View 11 Replies
View Related
Jun 27, 2011
Recently i had migrated from windows 7 to fedora 15. i have lot of flipbooks with me and unable to open those flipbooks in fedora. finding a suitable solution to open those flipbooks. is there a software to open these books linux. in windows there is no requirement for special softwares to open flipbook, since it is similar to flv or swf files. i had already tried with wine. with wine the file is opened but do not displays the contents or pages, show a blank white screen. @people who dont know about flipbooks: flipbooks are flash objects usually created from pdf files used for reading, flipbooks simulate the reallife book actions(page turning).
View 1 Replies
View Related
Dec 7, 2010
I am unable to boot my laptop in the usual way. The fedora emblem in the centre of the screen appears and starts to turn from white to dark blue in the usual way. When it is almost complete it stops.
In order to make the machine boot i hit escape and a message says leaving interactive startup mode. At this point the machine continues to start up.
When i do manage to get it to boot i get the following message repeated many times:
I should also add... The laptop will not close down, once i click switch off the screen turns blue and displays the fedora emblem in the centre. At the top right text says "Shutting Down" but at this point the system hangs.
View 3 Replies
View Related
