Fedora Installation :: F10 X86 DVD Install White Screen
Jan 27, 2009I was able to install fedora 9 just fine. But now when I go to install fedora 10 right after the anaconda installer starts the screen goes white.
View 1 Replies
ADVERTISEMENT
Fedora Installation :: White Screen On Install
Jan 14, 2009complete trying newbie trying to get to grips with linux. Tried ubuntu and didnt like that so someone suggested fedora. I'm having the same problem I had with ubuntu, I get a white screen when trying to load the graphical install after the media test. On ubuntu this was solved by selecting simple graphics mode. Here I have tried the following commands during install with still no luck
The text install just freezes after selecting the keyboard layout so that does not even work. Tried searching for forums but only solutions I could find where the previous.
Debian Installation :: White Screen - After Install
Jun 4, 2011Loads to the screen where you choose between regular and recovery, select e for the normal boot to see boot commands.
The GNU GRUB 1.98 boot reads as follows:
What do? ubuntu 8 worked fine, i ran an update to 10 and it did the same thing. i figured i would try debian since i have it on my other 2 computers. this is being installed on a desktop with a radeon 9800 graphics card. i know the card is the problem because of a driver issue (as i've read) but how do i get it.
Ubuntu Installation :: White Screen During Install?
Jan 1, 2011I started installing ubuntu and it goes thourgh the loading screen then it goes stripped white.
View 2 Replies View RelatedFedora Installation :: White Screen On Boot Of F 10
Jan 7, 2009I have a Gigabyte GA-MA790FX-DS5 with an AMD Athlon 64 X2 and 4GB RAM. The MoBo does not have embedded video. My main video card is a Diamond Radeon HD3650 PCIe. I was unable to initially install F 10 as the screen would blank out (Black Screen) after it would start Anaconda. I attempted to boot using the suggested option of nomodeset with no change of symptoms. I then switched out to an older PCI video card (NVIDIA GeForce FX5200) and was able to go through the install. Now I am attempting to switch back to my preferred card (HD3650) and just before the GDM screen appears the screen goes to solid white and no ability to switch to another VT. I have been unsuccessful at finding any workarounds for this. I thought the issues were with the older proprietary chipsets pre open source of ATI which was supposedly older than the R500 series, but I guess I'm wrong.
View 1 Replies View RelatedFedora Installation :: White Screen On Bootup
Jan 25, 2009I get a blank white screen when i try to bootup fedora and ubuntu to install them. I don't know whats wrong, any ideas?
View 1 Replies View RelatedFedora Installation :: Fedora 10 White Screen Of Death
Apr 16, 2009I've been trying to install Fedora 10 Core to a new my machine. The live CD appears to boot, but once I get beyond the selection stage (installing or running Fedora from the disk first), I invariably get a fully white screen. Nothing I've tried to do changes this. Although I'm reasonably experienced with the command line, I've never tried to do a GUI-less install of a full OS, and am unsure how/if to begin with Fedora. Any suggestions for either fixing the white screen of death, and/or installing from the command line would be a big help.
View 3 Replies View RelatedFedora Installation :: White Macbook 5,2 Grub Lockup - Hang At Blank Screen
Jun 13, 2009[code]...
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
Installation :: Black Screen After Blue And White Bars On Fedora Live Cd Boot / What To Do?
Nov 7, 2009I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
Fedora Installation :: F10 On Homebuilt Server - Screen Goes Blank And Freeze - The Blue Line Changing To White
Jun 4, 2009Ive recently built a music server with the following configuration:
AMD Athlon 64 X2 5200 processor
Gigabyte GA-MA74GM-S2 Motherboard with 2GB ram
Western Digital Caviar Green 1TB SATA Hard Drive
Samsung 22X CD/DVD Burner IDE
I would like to be able to run Fedora 10 (and Vortexbox, an application to burn and store CD�s) but have been unsuccessful in getting F10 to load. I am a novice Linux/Fedora user. I've been able to load and run Windows XP on the server with no problem. I have downloaded and verified both the x86_64 DVD and the x86_64 Live CD from the Fedora website. With the live CD, the last thing that appears before the screen goes blank and the install freezes is the blue line changing to white. I have tried several different SATA configurations , have turned off all non essential options in BIOS(ethernet, USB support), and have tried loading with fail safe bios settings.
Fedora Installation :: Boot Selection Menu, Get A Grey Screen With A White Cursor, And The System Freezes?
Dec 4, 2010I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
Fedora Installation :: Nouveau And NVidia Drivers - Jet-black Screen And A Completely Inexpressive Blinking White Cursor
Nov 29, 2009Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies View RelatedUbuntu Installation :: Cannot Boot / Hangs On Black Screen With A Flashing White Dot In Top Left Corner Of Screen?
Jun 1, 2010After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
OpenSUSE Install :: White Display After Login Screen
Dec 29, 2009This is the 2nd time this has happened. I installed 11.1 & 11.2 later. After the install I would get the login screen just fine and then when it starts running everything goes white. It is an issue with compiz and my graphics I assume. The interesting part is in opensuse 11.0 I had all compiz items not installed. When I installed 11.1 & 11.2 they reinstalled. For next time is there a way to not have these installed on the install? What I had to do was login in a different session other than Gnome. Then go into yast and remove compiz. Then logout and log back in with gnome and the white screen is gone.
View 9 Replies View RelatedOpenSUSE Install :: White Screen While Booting OS11.3?
Feb 18, 2011I created bootable USB stick in Ubuntu the hard way in console. When I am booting and when my status bar is half full with white color I get white screen, where is the problem please?
View 9 Replies View RelatedOpenSUSE Install :: After Booting Suse 11.2 Getting Complete White Screen?
Aug 26, 2010I have installed openSuse 11.2 in vmware that is a virtual box on win7 ,last time when I logged in I tried to change some desktop effects. [COLOR="rgb(0, 0, 0)"]When I again started suse , up to login screen everything was working fine. but after logging in I am getting a COMPLETE WHITE SCREEN and everything gets stuck ...
[/COLOR]
OpenSUSE Install :: Boot Sometimes Ends With A Frozen White Screen?
Jan 25, 2011I got a problem with my opensuse 11.3 machine. Sometimes it doesn't boot up correctly and ends with a frozen white screen. It's not just x that is broken the whole pc is frozen as I can not ping or ssh into my machine
View 9 Replies View RelatedOpenSUSE Install :: Auto Login To White Screen & Run Level 3?
Feb 2, 2011Main problem: newly installed Suse 11.2/Gnome from DVD i586 goes to white screen after auto login. I re-installed once with same results. I have limited understanding of linux.
System: Biostar M7NCD Ultra mainboard with NForce Ultra 400 chipset, AMD Barton 2500 (overclocked), GForce FX5200 NVIDEA video.
FYI: I used this exact video card on an older mainboard and ran linux with it no problem and all hardware checks out okay when I drop in a HD with XPpro on it, which makes this a linux software problem by my reckoning - video setup most likely. I can boot to the green Startup Options screen and then my ignorance starts to show.
I wanted to boot to level 3 then try some things (init 3, sax2 -r) I've read about on this forum and from www search but I'm password blocked in level 3!? Install only asked me for one password and it doesn't work here.
How do I deal with the level 3 password issue?
Fedora :: 10 LivaCD - White Screen
Jan 29, 2009I wanted to try F10 today so I downloaded the Fedora 10 64 Bit LiveCD but for some reason after it's done loading (the three colored loading bar), it hangs on a white screen with no sign of my computer thinking (no HDD LED activity and no CD ROM activity indicators flashing). Any clue how I could test the LiveCD without having to install Fedora (with text or otherwise..)? For the record, I have a 4870 1GB graphics card. I'm assuming that's fully supported, right?
View 3 Replies View RelatedUbuntu Installation :: 9.1 - Can't Get To Boot - White Pixels At The Top Most Row Of The Screen
Feb 23, 2010I recently downloaded Ubuntu 9.1 and burned it to a CD. However, I can't seem to get it to boot. I got to the main menu and selected to run it directly from CD, and the Ubuntu symbol showed up saying it was loading things, but then the screen went black and nothing happened even if I waited over 15 minutes. During this time the HDD light was flashing every second or two, and I could see about three white pixels at the top most row of the screen.
View 8 Replies View RelatedUbuntu Installation :: Black Screen W/ White Stripes ?
Jun 20, 2010I 've recently installed UNR 10.04 Lucid Lynx in my old PC.
Specs:
CPU Intel Pentium 4 2.66 GHz
Mother ASRock P4i45GV R5.0
Chipset Intel 845GV w/ Intel Extreme Graphics (shared memory up to 64 / 256 MB -I don't really get which one-).
Nevertheless, when I start the Pc, Ubuntu loads and, when it's about to load the desktop, the screen turns black with white stripes and "turns itself on and off" (like when it receives no image). I don't really know if this is or not a graphic bug / problem, but it's quite strange, as I've used Ubuntu 8.10 and 9.10 before in that same Pc.
By the way, I get the same error with the normal Ubuntu Lucid. AND, I have a Win XP Professional SP2 installed (I've installed the Ubuntu afterwards, so I have the Grub as default bootloader).
Also, I get the same error when loading Ubuntu in LiveCD mode.
Ubuntu Installation :: White Screen On Start Up - Won't Launch
Dec 15, 2010I have been running Ubuntu 10.04 Lucid not on a separate disc partition but installed right on my Windows (7) partition. Everything was working fine until yesterday. I restarted my computer and then the system was scanning the disc then suddenly after the disc check, the computer restarted and when it was supposed to launch Ubuntu, the screen went completely white. I tried restarting again, I manage to get to where I choose to boot with Windows 7 or Ubuntu. I choose Ubuntu and the same happens again: white screen. It doesn't go any further than this and the only thing the computer can do is boot with Windows 7. Has anyone had the same problem? Also, is there a way I can access my files (saved in Ubunutu) from Windows? If I can manage to copy these files then I don't mind reformatting the whole disc.
View 5 Replies View RelatedUbuntu Installation :: 11.04 Boot - Screen Goes Completely White
May 11, 2011I recently Installed Ubuntu 11.04 on my Compaq evo n800c
CPU-Pentium 4
RAM-1GB
HDD-60GB (yeah i know, it's old)
GPU-ATi Radeon Mobility 7500
Installation went fine but when I boot in Ubuntu I get a MS-DOS like workspace that asks for my login and password. When I give it my credentials,it just says welcome in text and thats it. Now if I go into recovery mode and choose any of the options [normal boot/failsafe-graphics boot] the screen goes completely white. I spent hours searching Google for a solution but nothing worked. what is the problem and also what will be the solution for it.
General :: Ubuntu - White Screen Of Death (Brand New System Install)
Dec 4, 2009I am a Linux newbie and did one successful install Ubuntu 9.1 32 bit on my old desktop. Encouraged by that success (and the ease of it), this week I built my own system, which will be my primary system. I am trying to install Ubuntu 9.1 (AMD 64 version) and after the partition selection screen (I chose to partition the entire disk), I immediately get a white blank screen. Then nothing happens. I also tried with Ubuntu 9.1 32 bit, XUbuntu 9.1 64, Ubuntu 9.04 all had the same results.
Not sure if the hardware specs are required, but here they are:
1) Motherboard: MSI KA 780 G
2) Processor: AMD Athlon II X4 630
3) Memory: Corsair 2 x 2 GB, 800 MHz twinx 6400 c6
4) Harddrive: Hitachi sata 300, 1 TB
In desperation, I have started windows XP installation and that seems to progress fine at its leisurely pace. Its formatting the drive right now. During one of the attempts, it did install something*, since after that I see a new ubuntu partition after that. But when I boot from hard disk I get a black screen with cursor. I tried to search thru the forums and nobody seemed to have this exact problem, one guy got a white screen with cursor after a graphics card install, which is not the same. I dont want to go back to windows.
Fedora :: Compiz Fusion Causes White Screen On 12?
Jan 25, 2010I just did a clean installation of Fedora 12 on my Intel Core2 Duo system. I installed packages to use compiz fusion. When I select the Compiz Fusion Icon option from the System Tools menu, my screen goes white, and I have to SSH into the system and reboot it
View 4 Replies View RelatedFedora :: White Screen With IPlayer In Fullscreen
Oct 17, 2010I'm running Fedora 13 (64-bit) on a Dell Inspiron 1525 laptop with integrated Intel graphics (lspci reports it as: 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)), and am having a strange problem with watching iPlayer in fullscreen.The video will work fine in the web browser at default size, and most times even in fullscreen as well, but sometimes on switching it to fullscreen the entire screen goes white with only the cursor visible. The sound keeps on playing and the cursor responds to mouse movements but I haven't been able to do anything to fix the screen (I tried bringing up a terminal and logging out, as well as doing a "compiz --replace" but neither had any visible effect - obviously I may have typed them wrong since the screen was white, but I tried multiple times). As mentioned above, I am using Compiz desktop effects, and also had to check the "Unredirect Fullscreen Windows" box in CCSM to get iPlayer to play video in fullscreen in the first place.
The annoying thing is that I haven't been able to consistently reproduce the error, in that sometimes it takes multiple attempts of going fullscreen and/or videos for it to occur. However, it has been pretty consistent in that it has only taken a couple of different videos to be played for it to happen (oddly I don't think I've had it happen on the first fullscreen attempt of the first video yet, but that might not mean anything).
Fedora :: GNOME 3 Load To White Screen
May 31, 2011On attempting to load GNOME 3 with Gnome shell, the screen fades to white, stalls for a minute, then gives an error and asks to log out. "Classic Gnome with Compiz" has numerous graphical glitches such as the background not refreshing (think Windows 95), among other things. How can I get GNOME Shell working again?
Gnome shell and classic gnome load fine under other users.
Ubuntu Installation :: PC Resets After 10.04 - Blank Screen With White Text
Jun 11, 2010So everything went fine in my installation of ubuntu 10.04 but when the pc was reset after installation, it goes to the black screen with the white writing and then does nothing. To check if there was a problem with the disk I had burnt, I installed an an older version of ubuntu (8.something) which had previously worked and the same thing happened: installation goes fine but then when I reset it goes to the black screen with white writing and does nothing. I then tried to install 10.04 again through usb with the same results. Do I need to change a BIOS setting?
View 2 Replies View RelatedUbuntu Installation :: 9.10 To 10.04 - Blank White Display After Grub2 Screen
Aug 16, 2010I just upgraded to Ubuntu 10.04 LTS from 9.10. After the upgrade process, I restarted and chose "Ubuntu, with [the current kernel]" and now I am greeted with a white screen with no login or boot splash. My processor is pegged according to the processor case light. My computer's specs are as follows: AMD Athlon X2 5200+, ATI Radeon X1300 Pro, 2GB DDR2 ram, Dell Socket AM2 Motherboard, and 250 GB 7200 RPM hard drive. I really need to get this computer to work.
View 7 Replies View RelatedUbuntu Installation :: White Screen Fades Out During Boot (not WSOD)?
Feb 27, 201110.10, and I am havingn interesting issue.During boot, right after POST and right before the bootloader screen with the progress bar and Ubuntu logo, my monitor goes completely white. However, almost instantaneously it starts to fade to black, and eventually goes away. I know it's not the white screen of death that I've heard about, because next I can log in and use my computer just fine.If anyone could point me in the right direction to try to fix this, I would greatly appreciate it. Even filenames related to Ubuntu boot would help, as I'm still learning.
View 4 Replies View Related
