Fedora Installation :: FC12: Yum Update Then Boot Hangs / Preload Daemon?
Feb 17, 2010
Have had a clean perfectly working copy of 2.6.31.6-166 for months and after two updates to 2.6.31.12-174.2.3 and 2.6.31.12-174.2.19, neither of the newer kernel versions will allow machine to boot properly. Start-up hangs at the preload daemon with a flickering screen. To use machine, must use grub chooser and choose the original base kernel.
Running on Tyan h2000m board, opteron 2356, Nvidia 9800 GTX+ and 12GB of dram with SELinux security enabled.
View 2 Replies
ADVERTISEMENT
Jun 10, 2010
If I turn off the quiet mode in the boot options, it does throw up some errors (e.g. SQASHFS), and then stops after "starting abrt daemon".
On an AMD Athelon. It worked fine of F9, but started playing up, so I'm looking at upgrading.
View 4 Replies
View Related
Aug 15, 2010
why does hal daemon hangs? but if i try the interactive booting and disable the hal upon starting,it will boot up. so maybe i can just disable this every time it boots, how can i do this?
View 2 Replies
View Related
Oct 27, 2010
I installed Centos 5.5 yesterday and discovered that the hal daemon was failing to start on boot.
The messages showed that the hal daemon was hanging because nss_ldap could not connect to the ldap server. It eventually failed and the system came up multiuser without it.
When I started looking into the problem I discovered that hald was being started quite early in the boot process. It's sequence number was 26 (if I remember correctly). This was even before nscd.
If I chkconfiged it off and booted, I could start it successfully once the system was up.
I changed the sequence number to 98 and bring it up relatively close to the end of the boot process.
This works and it starts normally.
Is starting it as early as 26 in the boot process done for a reason? It seems to me that it should definitely not be started before nscd. Does it matter that I moved it to the end of the boot process?
View 2 Replies
View Related
May 3, 2011
My GRUB is at v1.5 and have just updated UBUNTU to 11.04 from 10.10 I have a AMD processor and am using the 64 bit version of UBUNTU
The system will not start normally, it will hang. with this on the screen
Boot from (hd0,0) ext3 9a590bb3-d88b-40e5-8e48-46c83c0865dd
Starting up ...
I have discovered a way to boot I select the recovery mode then I select failsafeX , next I select restartX . And the system will boot,
I am looking for guidance on what to do to get my system to boot normally without having to use the workaround that I now use,
View 3 Replies
View Related
Nov 17, 2009
I just upgraded to Fedora 12 x86_64 via yum upgrade. However I have problems with booting. The new FC12 kernel won't boot. Boot output is something like
Code:
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sda to RAID set "sil_ajabaccaaidg
ERROR: sil: RAID type 253 not supported
ERROR: adding /dev/sdb to RAID set "sil_ajabaccaaihe
No root device found Boot has failed
I resized boot partition to 400MB, formatted it as ext4 and recopied all files, modified fstab to update boot partition's UUID. Tried to set a boot flag on boot, still, I can only boot with the old kernel from Fedora 11. Is it a Fedora 12 kernel's bug or something wrong with my setup? I don't use any RAID, and the sil error is present with Fedora 11 kernel also.
View 1 Replies
View Related
Sep 4, 2010
I have a problem with the kernel update to 2.6.34.6. Up until 2.6.33.x my system boots fine, but with this update the boot stops at the moment that the mouse cursor should become visible. To resolve the problem, I've gone back to 2.6.33.x and removed the 2.6.34 kernel but I wonder what happens with the next kernel update.
Anyone else having this problem?
View 8 Replies
View Related
Nov 1, 2010
I just removed a proprietary (fglrx ) driver which didnt work out well.Now all my updates hanging on: Setting up initramfs-tools (0.98.1ubuntu6) ...update-initramfs: deferring update (trigger activated)Setting up linux-image-2.6.36-020636-generic (2.6.36-020636.201010210905) ...Running depmod.update-initramfs: Generating /boot/initrd.img-2.6.36-020636-genericAnd I dont know how to solve it...besides a clean install.
View 9 Replies
View Related
Sep 15, 2010
I've followed this guide [URL] after rebooting the system hang at:
starting ati external events daemon [OK]
This line start blinking for a while, then nothing happen. I am using a radeon hd 4225. (I'm booting with acpi=off).
View 3 Replies
View Related
Feb 13, 2009
I downloaded F10 x86_64 live Developer Spin ISO file from fedora project spins website and burned it onto a DVD...Now when I try to boot from it, I get a menu as usual. Here I select the 'boot' option. Now it shows a 'loading' page with a progress bar and 'Fedora 10' written on the right side [as usual].. After that, on the next page I get the following error..
error: unexpectedly disconnected from boot status daemon I somehow did a reboot, and again the same problem. Microsoft XP and another Fedora are already installed on the same system..
View 2 Replies
View Related
Aug 8, 2011
I am unable to boot with kernel 2.6.35.13-92.fc14.x86_64 which was installed while applying software updates. It hangs with the last message issued "Registering binary handler for Windows Applications". Searching led to it being related to a problem with the nvidia drivers. I followed the directions in several posts - delete /etc/X11/xorg.conf, reboot, run nvidia-xconfig, reboot and all is fine, but not in my case. The first reboot works but the screen is wrong. There is a 1 inch wide black border around the presentation window. If I then do the nvidia-xconfig and reboot, i am back to where I was before - boot hangs after issuing "Registering...". If I boot to the last good kernel, everything works fine. This happened to me once before and I was able to fix it by rebuilding the nvidia kernel (I think that was what I had to do), but I can't find out how to do that. I have akmod and kmod installed which are supposed to take care of this problem. I booted to kernel 13-92 recovery mode, deleted the xorg.conf file and ran nvidia-xconfig from there. Still fails. I don't know what to list here, but I will do my best to supply whatever is necessary.
View 1 Replies
View Related
May 20, 2010
My system (recently installed FC12) is reporting that there are 563 updates available. When I try and install the updates I get to the stage of "Getting list of updates" and receive the message "The package identifier was not well formed". The details are "Package_ID cannot not be parsed". It further says that "This normally indicates an internal error and should be reported."
View 4 Replies
View Related
Sep 1, 2010
how to update patches in fc12.
View 2 Replies
View Related
Apr 21, 2010
Mozilla programs are not connecting to the network. All other networking programs are working: yum, wget, skype, opera, nslookup, etc. Firefox and Thunderbird are not able to connect to the network. What happened? My box was working fine earlier! All I can figure is something included in the yum update that I performed today.
View 2 Replies
View Related
Jan 19, 2009
I have just completed a dual boot installation of FC10. The install was done from CD's I downloaded from the Fedora website. The installation (seemed to have) went fine, and the machine still boots into XP if selected from the menu. The Fedora installation does not complete the boot process. I have three bars that move across the bottom of the screen, and the Fedora 10 graphic tuns white, and then the system hangs. I have let it sit at this screen for as long as 30 minutes. The screen will blank occasionally, but returns to the same place if I hit a key on the keyboard.
I have it installed on an old HP E800 netserver, running dual P3-866mHz processors, 2GB ram, a ATI Radeon 7000 video card, and three 36GB SCSI drives, non-raid. I know FC10 will run on this machine, as I have a friend running it on another E800 without any problems. This machine does have on-board video that is disabled only by plugging a different video card in (Phoenix BIOS).
View 4 Replies
View Related
Nov 24, 2009
This is one of those newbie questions about where I look to find error messages so that I can understand what the issues might be. My Fedora 12 setup invariably always hangs whenever I login following a cold boot. I login to x/g-nome, the screen clears and the initial background appears and then that's it.
I've been getting out of this by switching to another TTY (CTRL + ALT + 2), login as root and issue "shutdown -r now". System re-boots and I can login normally. I can see a stream of messages, I think relating to x scroll up the screen rapidly after the shutdown command. I'm not fast enough on the Pause button to read them. My question(s) then is... is there somewhere I can look to see what those messages might be? From the symptoms described initially, anyone have any thoughts on what the issue is likely to be?
View 6 Replies
View Related
Dec 19, 2009
I have just upgraded my F11 x86_64 system using the DVD ISO.
After rebooting as requested:
1) Cupsd fails to start - it can't find libaudit.so.1 (this doesn't worry me in itself).
2) Boot process proceeds until starting hald. This gets an OK response, but then the process hangs. No further output appears on the console. Pressing [ENTER] just causes a blank line to appear on the console. Pressing CTRL-ALT-DEL causes a reboot, and the same symptoms re-occur.
I'm tempted to boot with the rescue disk, save a few critical data directories, then start afresh with a clean install, but is there anything I can do to salvage the upgrade?
View 1 Replies
View Related
May 28, 2010
I currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
View 12 Replies
View Related
Jun 21, 2011
I recently upgraded through 'YUM' from Fedora 14 to Fedora 15. The upgrade appeared to be successful until it re booted, ever since then it hangs at
Code:
Started SYSV: Enable monthly update of smolt.
I have downloaded the ISO and burned it to DVD on another system which I used to try to rescue the installation, so far to no avail. My system specs are in my signature below (Laughlin is what I upgraded from).
View 7 Replies
View Related
Jan 23, 2010
I just finished a few updates this evening (Friday Jan. 22, 2010). Attempting to launch Sunbird from the menu after the updates finished brought nothing. From the command line:
Code:
BASH:~/-> sunbird
Cannot find Calender runtime directory. Exiting.
Great, just great.
If you also experience this same scenario, there is a quick fix. As root, load /usr/bin/sunbird into a text editor of your choice. Edit the line:
moz_libdir=/usr/lib/sunbird-1.0b2pre
to read:
moz_libdir=/usr/lib/sunbird-1.0pre
I suppose that would be /usr/lib64/ if you're using 64 bit OS.
Whether this was a glitch in the delta rpm rebuild (yum presto) that only might have effected me, or a packaging snafu that's going to catch everyone, I don't know at this time.
View 8 Replies
View Related
Mar 3, 2009
I installed fedora on my second hdd, the other one had xp before fedora, now in grub it shows xp as other and wont boot into it, just hangs there. SDC is an external drive and sdb is the xp drive as you can tell by the filesystem.
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x836db2c4 .....
View 1 Replies
View Related
Dec 28, 2009
I'm attempting to install F12 64 bit. I currently have F10 running on this system. I'd like to do a clean install. I'm using the DVD. I boot the computer with the DVD in. I choose the first option (Install or upgrade). It starts the boot process and then it hangs. [URL]
After asking at #Fedora I was given the advice to boot with `intel_iommu=off`. That gets me slightly further in the process. It gets to the point where anaconda is starting. Then all heck breaks loose. It appears the monitor loses the signal from the computer (power light turns red just like if the computer was off). The caps lock and the scroll lock lights on the keyboard blink about once a second. The DVD drive continues to spin for about a minute and then stops. Since I have no display, I have no idea what's going on.
View 2 Replies
View Related
Jan 1, 2010
I was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
View 2 Replies
View Related
Nov 4, 2010
A package nss >= 3.12.8 is not available. But it is needed by thunderbird update in the course of "yum update". yum exits with RC 1.Is "--skip-broken" the right way to exclude the thunderbird update ("Resolve depsolve problems by removing packages that are causing problems from the transaction")? Or is there a better way to exclude a package? Problem screen output:
---> Package thunderbird.x86_64 0:3.0.10-1.fc12 set to be updated
--> Processing Dependency: nss >= 3.12.8 for package: thunderbird-3.0.10-1.fc12.x86_64
--> Finished Dependency Resolution
[code]....
View 3 Replies
View Related
Aug 4, 2010
I have an error when I try to update or remove transmission-daemon package.
Here are some logs:
root@ubuntu:~# apt-get --reinstall install transmission-daemon
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 2 Replies
View Related
Sep 19, 2009
The gnome-settings daemon was updated today on my Fedora 11 machine and it's now performing all kinds of interesting activities. It's using my CPU a ton. And it's generating lots of network traffic. This appears to be a massive bug of some sort. Anyone know any more details? I haven't found anything yet.
If you haven't updated it, DON'T!
2.26.1-10 appears to be the culprit.
View 9 Replies
View Related
Oct 12, 2014
After my most recent update, the boot sequence hangs at:"a start job is running for Create Volatile files and directories" with a timer and no limit .. I let it go for 12 minutes, but nothing.It seems as long as this sequence remains, the boot process does not finish and just hangs here.I haven't been able to find anything specific to this. I currently cannot boot into this machine, though do have access to files via dual boot.
View 8 Replies
View Related
Sep 10, 2010
I did a fresh install of Ubuntu 10.04 on a desktop. I then did the system updates and on the reboot the system now hangs at the splash screen before the login screen. I only get a blinking cursor on the text-based terminals. I don't see the grub menu, I assume because Ubuntu is the only OS on this machine. So I can't boot to single user or text-only mode.
View 3 Replies
View Related
Jun 5, 2011
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
