Ubuntu Installation :: Distro And Recent EFI Motherboard Installs?
Sep 1, 2011
Has anyone done a recent install of the latest Ubuntu on a EFI motherboard? Last time I tried (right as 11 came out) I had horrible graphic errors during the install, problems install grub2-efi, and then even when I got everything installed I had graphic errors on boot up that rendered the install worthless. I think I am going to have to go to a different linux distro, which I am not really that happy about, but I need linux on this computer. know experiences with ANY linux distro and recent EFI motherboard installs.
View 2 Replies
ADVERTISEMENT
Mar 12, 2011
Is it possible to update a Live USB so that way when you use it to install to another computer it will install with the most recent updates? I want to install Lucid to my sister's computer, but it doesn't have internet so once its installed it's never getting updated again.
View 9 Replies
View Related
Aug 20, 2010
Uh why does Ubuntu 10.04.1 x86 run like dog **** on USB flash? Heres what happens, system runs for 10 seconds, freezes for 5, on and on and on, its horrible and basically a useless install, an endless loop of frustration and system halts.. Is there a special distro or version for USB installs?
Coz installing off the 10.04 cd directly to a 4gb U3 USB stick runs like a DOG POO! Yes its USB 2.0, and it should not be doing this, I almost went apeshit insane that after a 2 hour install process, thats the results I got. Celeron D 2.8ghz/512mb ram, no hard disk, U3 4gb USB 2.0. Im running puppy linux now and I have no hard disks, and since Ubuntu is clearly superior, would be nice to know what Im missing here or of this is a bug specific to my platform.
View 9 Replies
View Related
Jan 12, 2011
I've tried to do the installs using Unetbootin, LiveUSBcreator, and Startup Disk creator and the Install program from within the distros themselves, regardless of installation method the same problem returns. So I do not think the problem is related to method of installation.
Maybe it's hardware? I've tried a total of four different motherboards, (an MSI, 2 Gigabyte and an Asus) all with updated BIOS, all 4 of which work perfectly fine with normal Linux installations to the HD. I have no troubles running any of the above distros when installed to a hard drive.
The problem comes when I install to a thumb drive. Which thumb drive? Take your pick. I've used Sony, SanDisk, Kingston and a handful of cheaper brands in sizes from 2G up to 16G. The problem always returns regardless of the hardware involved. Therefore I do not think the problem is related to hardware.
I want a fully functioning installation of Linux on a thumbdrive. (I do not simply want a Live CD copied to a thumbdrive.) This will allow me to make changes to the software/settings and have those changes remain after rebooting. I'm able to do this just fine, and everything works perfectly until the third, fourth, or fifth reboot. At this point I enter my password and my password is no longer accepted. Sometimes the screen flickers a little, sometimes it just reloads the prompt. But it doesn't let me in. At this point it's Game Over. All the hard work installing and tailoring the install is down the drain. Yes, I've searched and found threads of this similar problem. Many of them go back to 2005 or 2006. The vast majority of them are people begging for help, receiving a few suggestions, finding no resolution and then the thread just dies. Honestly I've spent many, many hours following outdated advice that has, on occasion, worked, but only temporarily. The problem always returns. Something is seriously screwed up and I can't be alone.
So here I sit with a brand new 4Gb Sandisk that up until last night had a beautifully running Ubuntu 10.10 installation. And yet, voila, my password is now no longer good enough. It simply will not let me log on. I enter it, hit enter, and the log-in screen simply reloads itself.
View 9 Replies
View Related
Feb 25, 2010
I have tried many things but none of which seem to work.
Motherboard : N2PAP-LITE
Processor : AMD SEMPRON 2800+ (32 Bit)
Stock FSB Settings : 166/333MHz
Chipset : NVIDIA NFORCE2
This is a really odd problem. It installs under 133/266MHz and runs fine. When it's at 133/266 it reconizes it as AMD ATHLON XP in the BIOS and the Linux Installation. I want to be able to install it using 166/333MHz which is the stock setting of the processor! When I set it to that in the BIOS it reconizes as a AMD SEMPRON 2800+ but will not install Ubuntu 9.10.
This is the error I get if I try to run it from the CD, Install it, or boot from the current installation which I installed it with 133/266MHz. If anyone can please help me figure this out it would be great, im trying to use it as a server and would not like to bottleneck it as it shouldn't be. I get these errors
Code:
check_bugs+0xbb/0xe9
start_kernel+0x2dc/0x2ec
? unknown_bootoption+0x0/0x1ab
i386_start_kernel+0x7c/0x83
Now if you want the whole error list I will type it up.This is a link for the motherboard manual.
[URL]
View 9 Replies
View Related
May 29, 2010
I burnt a 10.04 LTS disc when it was released and just tried installing on an old Pentium 2 400 MHz with 320 MB and two 10 GB drives. After rebooting, it comes up in text mode with a tty2 login. Did this install the server version only? Is there a command to launch the GUI shell? There were no options during the install to choose GUI or server version and I assumed this was the 32-bit GUI version and the install disc ran we GUI during installation.
View 4 Replies
View Related
May 11, 2010
I'm planning to have two installs on the same pc, so I can break / test one and still have a usable system. I've got my partitions setup so I have a separate /home for both installs to share, but how do I share the updates? I'm going to use clonezilla to copy the working (/) partition, but how can I use the updates for both installs. I'm just trying to save downloading twice if possible. Is there a way to copy or use the updates applied in one partition to the other? Does apt save the updates somewhere?
View 1 Replies
View Related
Nov 15, 2010
I've been installing Ubuntu on more and more systems for people. But I'm just doing the install from the the LiveCD download on the Ubuntu homepage. Once I do the install people want their desktop to look like mine so then I have to install Compiz and Cairo-dock and configure them both like mine. Is there a way to create a LiveCD or installation disk already pre-loaded and configured with Cairo-dock and Compiz. I'd also take off F-Spot and add digiKam, along with making sure a working version of Flash and Java are also included in my personal installs..
View 5 Replies
View Related
May 12, 2010
I am trying to figure out how to install this program i found atIt is a simle application that monitors systems.I have uncompressed it but i cant figure out how to install it.it's driving me nuts reading many websites on installing things and getting no place after a week.
View 3 Replies
View Related
May 19, 2010
Recently I have built an old pc using bits and bobs that have been collecting in the garage for years and decided to try and turn it into a file server, and to get some experience in networking etc. Now I had a choice of 2 motherboards for the system:
1.)gigabyte ga-8siml
2.)elitegroup l7s7a2
I first built the pc using the gigabyte board,install was successful and ubuntu server booted on restart. The only problem was,there is no onboard lan on the board and the only spare wireless pci card I found was completely frazzled. Rather than buying a new wifi card to get the system running, I thought I would try the other motherboard since this had onboard lan. The elitegroup motherboard however does not have onboard vga, so I dug out an old agp ati radeon 9200se 128m ddr tvo graphics card and plugged her in. The install went fine,but after a restart, I'm left with a blinking cursor at the top left of the screen.
If I hold down 'shift' for long enough I can bring up the grub menu,but if I select anything I get no signal on the monitor. After a while on the blinking cursor screen the monitor will time out to no signal on its own. I have tried the installation using different combinations of the options given by F6 of the first installation screen but to no avail. I have also tried installing the generic kernel as opposed to the generic-pae.
View 4 Replies
View Related
May 22, 2010
Here's a screenie of partitions where Ubuntu is currently installed:[URL]..sda1 is the partition where Windows used to reside - that's why it's flagged as 'boot'. When I nuked Windows, I just left it flagged that way as I figured that's where Grub is installed and didn't want to screw anything up.
I'm about to add a new 1TB drive for Lucid (most likely). I want to move this current drive to the second drive bay so it will become sdb 1,2,3 but keep it functional (at least until I'm convinced that Lucid will work for me). Here are my questions:
Will Lucid find the old Ubuntu install on sdb automatically and give me a choice of dual boot?
Will the old Grub legacy be overwritten? Should I remove the old 'boot' flag or leave it like it is? Do I even need a boot flag on sdb since BIOS is set to boot from sda? Any other tips before I start mucking around in a perfectly functioning system?
View 8 Replies
View Related
May 31, 2010
I installed ubuntu 10.04 server in VBox. I forgot to check Samba during installation so I installed it later with apt-get. When it was finished, Samba 4 was installed. I did apt-get remove and tried to install samba 3 and can't figure out how to do it. It wants to install Samba4 again. I tried "apt-get install samba3" but no joy.
View 1 Replies
View Related
Sep 14, 2010
On a new installation of Ubuntu Lucid I can install a network printer by getting the Printer utility to search the network to find it. The Printer utility then proceeds to install the driver. However when I try to print the test page I get an error saying that it can't locate the printer. The printer is not new, and all other computers on the network (all Ubuntu Lucid) can print to it.
[Code]...
View 4 Replies
View Related
Feb 4, 2011
I work at a local library. In a few days I am getting 8 new HP g72t laptops. Is there a way to do multiple installs of 10.10 with the same partition setup, installed programs, config settings , etc? I am a volunteer and have set up many ubuntu installs before but always had each machine old and different. Now I would like to automate all the installs somehow.I picked that laptop as linuxcity.com sells them with Ubuntu installed.I got them with windows and plan to remove win 7 and do Ubuntu 10.10
View 2 Replies
View Related
Mar 6, 2011
So I have decided to switch to ubuntu since xp gave out on me. Everything seemed so easy during install untill it randomly shut off. It now does this during different stages of installation but never gets further than after entering my user details and beginning the install. Its not faulty hardware as boots into xp home ed fine. I want a full install of ubuntu only though.I have tried both 10.04 and 10.10 (32 bit) booting from Live CDs (3 diff copys, as was paranoid of probs with the iso download)
The hardwares largely unknown but easily ran xp media center previously a year or 2 before. I'm very confident its not underpowered for this.As you can probably tell I'm completely new to this and not overly technical. I have looked around and some things suggest a problem with graphics cards.
View 1 Replies
View Related
Apr 21, 2009
I am having a problem getting F10 to boot after install.I downloaded the DVD, burned it and installed from it. No errors during the installation but when I go to reboot the system comes up saying:"VolGroup00 not foundUnable to access resume device (/dev/volgroup00/logvol01)Mount: error mounting /dev/root/ on /sysroot as ext3:h file or directory"This is being installed into an AMD Opteron Blade with an Adaptec SC2000 controller card, 4 SCSI disks configured in a RAID 5 array.I gather it's looking at the wrong device for a boot track/loader, but not sure how to fix thisAny ideas? I figured if it found it during install it should find it during boot but that doesn't seem to be the case
View 14 Replies
View Related
Nov 21, 2010
Recently my motherboard has been dying and the warentee is gone so I decieded it was upgrade time. I need to know if there is anything special I need to do for Ubuntu to work on my computer after the new hardware is installed. I currently have a 32 bit motherboard and processor and am switching over soon. GRUB 2 handles my boot and I know I have some extra stuff to do on windows 7 but I was wondering what I needed to do to get my computer to boot up after the upgrade.
View 4 Replies
View Related
May 20, 2010
I recently bought a new Gateway desktop. I use mostly Ubuntu but like to boot into Windows once in a while. Have used Ubuntu as my main OS for about 3 to 4 years, dual booting. After the Ubuntu 10.04 release, I decided to throw in another hard drive into the new computer and make it dual boot.
Mistakes:
1. I did not create the Gateway Recovery Disk in Windows before installing Ubuntu.
2. Installed Ubuntu 10.04 without disconnecting the Windows 7 drive.
3. The Ubuntu install never prompted me asking where to install Grub (apparently there is an advanced menu somewhere in the install process that lets you select), and it was installed to the first drive on the PC by default, which happened to be the Win 7 drive.
This left the Windows 7 unbootable because it did not appear in the Grub menu. I did some searching and managed to install Grub on the second drive (the one with the Ubuntu install) and also managed to add Windows 7 to the Grub menu so I could boot into Windows. This last procedure added the Windows 7 option to the Grub on both drives.
I then managed to fix the Windows 7 mbr using /fixmbr and /fixboot. The problems I still have are as following. I can't create the Windows Gateway Recovery Disk in Windows. Every time I try, I get a message telling me "Hard drive configuration is not set to the factory default. Restore aborted.". I already disconnected the Ubuntu drive but get the same results. I know this one is not a Linux issue, but maybe someone had a similar issue and might be able to help.
The next problem I have is that it looks like after the las Kernel update in Ubuntu, Grub overwrote the Windows 7 mbr again. Is there a setting file somewhere that now tells Ubuntu that Grub is installed in two places and that whenever there is an update it updates both? Can I change this? I really would like to avoid re-installing Ubuntu to fix this.
View 9 Replies
View Related
Jul 31, 2010
I am completely failing at installing most variants of ubuntu on my desktop (ubuntu & kubuntu 10.04, 9.10, normal & alternate, and mint 9 tried, all MD5 checks OK). My system has: Motherboard: Asus MX-M2V (google +ubuntu) Graphics card: gigabyte nVidia 7600 GS (google + ubuntu) 2GB RAM, AMD64 dual core, etc.
[Code]...
I've bean able to get past this stage by removing the "quiet splash" install option, however it still fails, usually with a garbled screen. The alternate CDs seem to work better but still ultimatley fail with a garbled screen. Mint 9 when live from the CD had the mouse cursor missing on the normal greed desktop, only a few pixels over a square about 1cm x 1cm were shown. I managed to run the "hardinfo" report guessing where the mouse was and save to a USB stick, I have attached the report.
Reading forums I saw a few things to try so I just installed Ubunto 9.10 alternate CD adding "xforce vesa" and "nomodeset" to the command line. During install I disconnected my 2 windows HDs so as to simplify matters. The install was to have a whole HD (Maxtor 160GB, IDE).
On booting with only that HD attached I am presented with the ubuntu logo, followed by a black screen with the mouse pointer only. At a certain point in the screen the pointer changeds to a insert text cursor. Once I managd to get something to happen by typing in my passowrd at this cursor but after this point only a garbled screen. Another interesting thing, after this I installed GAG to the MBR of my primary SATA drive which successfully loads either of my win HDs, but when I try to use GAG to boot to the ubuntu HD it reports "sector boot not found or invalid" I can get a command line on the HD with the ubuntu 9.10 screen using the "Recovery option" from the install CD but then do not know what to try.
View 9 Replies
View Related
Aug 27, 2009
I tried installing Fedora 11 on my i386 using the 6 CD set that I downloaded. Since my system has only 128M of RAM, the text install mode was used. The 1st CD installation seemed to work OK. After 181 out of 181 packages were installed, the system rebooted and did not ask for me to insert the other CDs. now when my system comes up, it is always in text mode.
Q. Is there a command I can use to have the remaining CD's installed so I can install the graphics system?
View 7 Replies
View Related
Jun 3, 2010
I am trying to install Fedora 13 on a new system from CD. DISK 1 runs but terminates without using disks 2-5. There is a system I can access as 'root' but I was not prompted to create a unique user or which packages should be installed.How do I complete the process?
View 1 Replies
View Related
Mar 26, 2010
I am planning to upgrade my system's motherboard tonight. I am going from a Via chipset and ATI graphics to Intel G41 chipset with onboard graphics. What do I need to do to Ubuntu in order to handle the upgrade? I'm running an updated version of 9.10.
View 9 Replies
View Related
Sep 10, 2010
i just got a new motherboard for a router/server at home i got something beefier, the deal is that the raid 0 i've got running on the old chipset is running ubuntu desktop edition and i just wanna install the server edition on the new beefier board, i've a /home partition in the raid if i swap the boards will that crap out what i've got in my /home dir... or can i just swap the boards and make a fresh install on a root partition without messing up my /home partition?
View 2 Replies
View Related
Oct 4, 2010
I have Foxconn motherboard 750/760A01.I install ubuntu and have problems whit driver for motherboard. When I search in net i saw that Foxconn have problems whit linox . how to install my Lan Card drivers, i cant find them in web. Now on Ubuntu i don't have any drivers for motherboard.
View 1 Replies
View Related
Jan 3, 2010
After not having used Ubuntu for a few months now, I want to make up a new LiveCD and possibly a bootable USB. The times I have done this in the past, the installations don't include recent updates which need to be downloaded and installed once the system is running. (Understandably)
Two questions:
1) Does Ubuntu update the downloadable ISO periodically to include recent updates?
...for example: Now that it is January (ie. some 3 months after release of Karmic in October '09 and some 200-300Meg+ of updates required since that time), will I be downloading an ISO from Ubuntu that has recent updates already as part of it, or will it still require updates to be downloaded and installed once Ubuntu is running on the computer?
2) If the downloadable ISO has not been updated since Oct '09, is there a way of making a LiveCD/bootable USB that has up-to-date updates already installed? (if you know what I mean?) ....and is this process relatively simple?
View 9 Replies
View Related
May 1, 2011
I made a post in http://ubuntuforums.org/showthread.php?p=10753227 but I guess it's closed.I'm having the same issue. I've installed Kubuntu 11.04 32bit twice now. Both times it doesn't do anything when it reboots.No output to the screen.When I boot to the LiveCD and chroot or simply mount the /dev/sda device and run sudo grub-install --root-directory=/mnt /dev/sdaIt says grub installs successfully, but it doesn't fix the problem.
View 1 Replies
View Related
Mar 26, 2009
I recently installed fedora 9. Everything works fine after install (except sound but thats a different story). When i run updates everything seems to have worked fine but when i reboot afterwards i get to the login screen which works but as soon as i log in it freezes? the only way to restart is to press the power switch...
View 5 Replies
View Related
Jun 20, 2009
upgraded from Fedora 10 to 11, had both KDE and Gnome desktops installed under 10 but now upgraded to 11 I get a boot error when truing to boot to KDE and most KDE apps that used to run under Gnome no longer do so
View 1 Replies
View Related
Mar 31, 2010
I just did an upgrade and it included the kernel. As time goes by, I will be stuck with a lot of kernels to choose from, and lower disk space. How do I remove an older kernel and everything it's related to it without breaking stuff?
View 8 Replies
View Related
May 3, 2011
I have this strange problem on ubuntu 10.04 64 bit, that when running update-grub, it will only put the oldest kernel into the grub menu, despite the fact that I have recent kernels around as well.
in particular:
Code:
# update-grub
Searching for GRUB installation directory ... found: /boot/grub
Searching for default file ... found: /boot/grub/default
Testing for an existing GRUB menu.lst file ... found: /boot/grub/menu.lst
[code]...
I'd like to see the most recent kernels in the grub menu, with the most recent being on top.
View 3 Replies
View Related
