Ubuntu Installation :: Can't Boot 10.04 To GUI On Laptop?
Oct 24, 2010
Since my wife just bought a new laptop I decided to polish her old (decrepit) machine a little and let my daughter have it. It was dual partitioned XP and Ubuntu 8.04 (which worked flawlessly). I figured that since it was older I'd load Xubuntu. I made a DVD of Xubuntu 10.04 that passed checksum. When I tried to boot from the DVD I got as far as the menu asking me if I wanted to boot from the DVD, install from the DVD, etc. Whatever I picked the machine seemed to think a while, then hang on a black screen.
So, I got an Ubuntu 10.04 CD from a book I'd just bought, and tried that. It behaved identically- after the option menu whether I tried to boot from CD or install, it hung on a black screen. So, I booted 8.04, and fired up the Update Manager, and loaded all recommended updates (as is generally my habit). Then I clicked the button to update to 10.04, all of which progressed as expected over the course of a few hours, until the reboot. At this point it did the same thing! GRUB loads, and I pick Ubuntu 10.04, then I get the word "Ubuntu" in the middle of the screen with several dots under it (the boot splash?) for a split second, then it hangs on a black screen.
If I boot Ubuntu 10.04 in recovery mode that DOES seem to work, and I get a command prompt. But fixing this via command prompt is WAY beyond my weak Ubuntu kung-fu.
The machine is:
Averatec 1000 series
Intel Celeron (R)M 1.00GHz
504MB RAM
Intel(R) 82852/82855 GM/GME graphics controller
Which seems to meet minimum system requirements.
Oh, and XP SP3 boots just fine.
But I'd be happy if I could single-install some version of Ubuntu, and screw the dual-boot capability with XP, if that makes any difference.
I tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
I'm a complete an utter newbie on this forum, and indeed to linux/ubuntu in general so pardon me in advance if some of my question makes no sense/sounds silly/makes you want to exterminate all noobs. Basically, I've had bad experiences (i.e. had to use my recovery system) trying to install a dual boot system with OpenSuse and want to get some sound advice before I proceed with installing Ubuntu, instead of having to go through the agony of formatting and recovering Vista HP again, and consequently trying to teach it all over again how to suck less.
Okay, so less waffle and more questioning. Background information is that the laptop is a Compaq F560. It has at present Win Vista 32 HP on the primary partition (C), with a recovery partition on (D). It has a very basic, almost un-alterable BIOS, 1.5Gb of RAM, 120Gb HD, standard CD rom, integral nVidia 6100m graphics card, a broadcom wireless network adaptor and various other bits n' bobs.
When installing OpenSuse last time I found 2 huge flaws with my method. First one is, that I didn't have wired networking available to me at the time, and foolishly forgot to get hold of the wireless adaptor drivers before installing Suse. No biggy you say, just go back to windows and download from there. Great, except I'd bozzed up the MBR too, so couldn't do that. Suse, for it's part, ran fine. Very smooth. I just couldn't do anything with it.
What I'm now looking to do, is give Ubuntu a shot, as part of a dual boot system, with Vista on the other half. I want to make vista the default boot system. I DONT want to have to go through my compaq's recovery system again, if possible. To meet these objectives, Ultimately, I'd like to transfer all of my operations across to Ubuntu, but I'm too windows-dependent at the moment, though some sort of windows-emulator wouldn't be a bad idea if anyone knows where/how/what.
I have been working on this for 2 days and I am ready give this one up!! I have an old 'hp omnibook 6000' It's an Intel mother board. I believe it has 4 or 5 GB hard drive. 512 RAM, put that in myself. I can load live-cd's and all is good. I have tried: Xubuntu-alternate 7.04 and the desktop cd. Puppy Linux loaded up ok and all was working. Dam Small Linux loaded ok. Each time I reboot after install of mentioned os, all I get is a flashing cursor upon reboot. I know each one installed as gparted has shown me. When I install I 'erase and use entire disk'.
I just recently bought a Toshiba L505-ES5033 and can not get ubuntu (or fedora 12 32 or 64) to boot from the live cd, or install. I can get to the initial menu that asks me if I want to try without changes and all that but from that point nothing really. If I choose any options other than the help option it runs through some scripts and gives me an error. The error refuses to stay on the screen despite my constant demands that it does; all I THINK I can make out is MIRR... configuration error. Fedora tells me something entirely different. After this error it goes to a faded black screen and I can hear my HDD making angry sounds.
I tested a month ago with my bro's PC and really liked it a lot. I downloaded 10.10 version from net. But i found out that my CD ROM drive is not able to read any CDs any more and my laptop doesn't have USB boot option. My laptop is a Pentium 4 with 1.5 GB RAM and is running Windows XP Professional SP 3. I have created 15 GB unallocated space for Ubuntu but don't know how to install in this situation.
Laptop HP G62-140US - BIOS Hewlette-Packard F.07, 10/2/2010.
Has Windows 7 Home 64 bit. Processor Intel i-3 2.1 GHz. Memory 4 GB. Hard disk 250 GB
Was not able to boot Ubuntu 9.04 from the DVD drive ('Broken Bios' error). Was able to boot Ubuntu 10.10 Seemed OK and so made a USB stick for booting.
This also worked on 2 occasions and after about a week cannot boot either from DVD drive or from USB stick. No upgradation of BIOS or Windows 7 was made.
Trying to boot from DVD drive got 'Broken Bios' error and with USB the error screen goes off too quickly and therefter the loading goes for ever.
I downloaded the disk ISO torrent and burned it to a DVD. I then ran the DVD and installed Ubuntu using the Windows installer. Upon rebooting, I get the boot menu asking which OS I want to start. I select Ubuntu and it goes to a countdown to hit ESC to select boot options. Once boot starts, I get a bunch of crap on the command lines and then it hangs. The entry it hangs on is something to do with? child-(several numbers I can't remember right now). I hope that is enough for someone to identify where it's hanging during boot. what is causing this? The computer is a Toshiba Satallite L505D-S5983. You can look up the specs for that. Processor is an AMD Athlon II M300 2.0Ghz, 32-bit, with 3GB RAM. Video is AMD M860G with ATI Mobility Radeon 4100. Primary OS is Windows 7. I'll see if I can find some paper and a pen to write down the particulars of the error. I usually use my computer for note-taking, but I obviously can't do that here.
I have a really old sony vaio and the disk drive does not work, it does not have the option to boot from usb so im kind of stuck. Is there any other way I can install unbuntu through windows xp?
I've just acquired a Vaio PCG-FX801 with Phoenix bios version R0121K5.In the boot order, it lists "+Removable Devices", but on expanding the menu, only gives "Legacy Floppy Drives".I only discovered this after unsuccessfully trying to boot from a stick with the 10.10 netbook iso on it.Is it possible to get round this,or should I put the iso on a cd,or should I download the desktop iso onto a cd, and use that? I want to try it out on this laptop before installing it.
On duel booting windows 7 and ubuntu on an hp laptop. All 4 partitions are taken up. I know i need to delete one partition to make room for ubuntu. Should I delete the windows recovery or hp partition? Or is there another option?
I'm currently having problems trying to install Ubuntu on my laptop.I have burnt off a CD that contains the latest Ubuntu 10.10 iso using the exact way the website tells me to.However, I can't boot from that CD. I can, however, boot from other CD's. For example i ran my Gparted Live CD to create a partition on my hard drive about an hour ago and that worked fine.
I have been using Ubuntu for years. I just bought a new laptop - HP Compaq 621. Hardware settings:
Processor: Intel(R) Core(TM)2 Duo CPU T6570 2.10GHz Memory: 1GB ROM Date & revision: 01/07/2011, 68PVI Ver. F.09 Video BIOS Revision: ATI 01/05/2011
I followed exactly what is described on Ubuntu [URL] Believe me, I burned image (not .iso data) to CD, but BIOS won't boot from the Ubuntu bootable CD. I also created a USB stick, again BIOS won't boot from the Ubuntu bootable USB (I selected to boot from USB first) stick. I tried with Desktop 10.10 32bit, 10.10 64bit, 10.04 32bit, and 10.04 64bit.
I also tried with my old Ubuntu Desktop 8.04 64bit bootable CD, which my very old Compaq Laptop installed. It allows me to see the menu. I selected "Safe mode" to install Ubuntu. But it gives me the error message: "udevd-event [1412] run_program /sbin/modprobe"
how I can install Ubuntu on my HP Compaq 621 Laptop?
I will be buying a laptop in the coming months for college and my intention is to run Ubuntu as my primary operating system, but I still want to have Windows 7 as a crutch. I know there are multiple ways to do this (Wubi, seperate hard drives etc.) but I was wondering if it were possible to just install it and if there were an option to partition your existing hard drive so they are virtually seperate from each other.
I have a laptop with two hdds. Winsows XP is loaded on the first, and I used the second hdd to play around with linux distros. I had Linux Mint and Zorin installed on the second hdd and everything was working fine. I decided I wanted to go back to Ubuntu 10.10, so I installed it to the second hdd, overwriting everything on it. Everything seemed to go fine, but when I went to restart from the install, I got some sort of I/O error and since then my laptop wont boot at all. I have tried telling it to boot from different hdds n the Windows BIOS. I have also tried 2 different live dvds of Ubuntu 10.10, all to no avail. All I get is a blank screen with a flashing cursor.
I've been running Ubuntu on my Acer 5100 laptop for about a year and a half. The latest version I had was 10.10 when my disk crashed and burned and had to be replaced. This was an external hard drive as my internal one died long ago and I'm too lazy to replace it. So things were fine until the crash. Bought a new hard drive today (same brand and model as the one the system was installed on before), downloaded 10.10 and installation goes fine. Then, in the end, I am told 'you need to reboot in order to use your new system'. So I say yes and the system ejects the CD-ROM and starts the shutdown process. Then it gets to doing something with the CD-ROM (/sr0) and it gets an IO error. Of course this is because the thing was ejected! So I get this loooong list of IO errors (all the same) on device sr0 and I have to manually reboot the system by the power button.
The system starts to come up, I see the BIOS hit the external drive, and nothing. It sits there with a blinking cursor at the top left of the screen and does nothing. Now, I've looked at a few things: 1: I've made sure the external drive is the first boot device. 2. I've made sure the disk was actually good and not damaged. 3. I've made sure the ISO I downloaded has the same hash as the one I got I've even tried the install on ANOTHER drive and the same thing happens! I know 10.10 can run on this system as it HAS in the past with no problems at all.
I have tried 11.04 and 10.10 64 bit and after I install the OS my laptop will not boot. The install goes great after being booted from a USB but after the install when it tries to boot from the HDD all that happens is the screen lights up and goes dark repeatedly.
I have just downloaded version 10.04 for my laptop as the previous version (9.?) stopped the internal fan from working. As it was installing the laptop got too hot and turned itself off. I have tryed to reboot but it won't.
After several attempts at installing Ubuntu 10.10 on a Samsung N150 laptop/netbook, I have finally succeeded, but it won't boot without the installation USB drive being plugged in. Trying to boot it without the USB thumb drive it just stops at a black screen and does nothing.
With the USB drive in, it doesn't actually load up the installer, as you would expect, but boots normally into Ubuntu. Once booted, you can remove the drive and it runs fine without it. When you plug it in, it sees it as /dev/sdb, and the only hard drive is also seen as /dev/sdb. So it never mounts it. It can mount any other USB thumb drive normally.
I used a cd version of ubuntu 10.4 but my laptop wouldn't boot.I thought of installing the previous version of ubuntu and then upgrade it.I used ubuntu 9 and it worked perfectly. But when the upgrade finished and my pc restarted it showed this message [1.007098] Disabling IRQ#4
Fed up with Windows and ready to become a Linux convert. Here's the only problem:
I've created no less than four separate Live USB distros - all using different USB sticks - yet my HP Pavilion dv7 refuses to recognize any of them as "bootable devices."
1) Have formatted USB sticks in FAT16 & FAT32 - neither made a difference.
2) Have created bootable USB sticks using Ubuntu Minimal Live install; Ubuntu full Live install; PuppyLinux Live install; even a simple gparted live install - none will boot.
3) Have checked & re-checked that BIOS is set to boot first from USB drive device.
4) 2 of the 4 USB sticks are new, fresh out of the packaging; and 3 of the 4 USB sticks are each from different manufacturers - so I'm fairly certain it's not a issue of a particular brand being incompatible, nor is it due to the sticks being corrupted somehow.
5) Each of the 4 live distros appears to have downloaded just fine - all necessary files appear to be in order.
6) Have tried using Unetbootin, Ubuntu's own live usb tool, and 1 or 2 others - all have failed to boot my HP laptop.
7) Have even tried removing all non-essential hardware before booting - even booting with no hard drives installed - system still returns the error "no bootable device detected."
This laptop is only 2 years old; I know it should be able to boot from USB. I can boot from a (rather old) SliTaz distro on CD just fine - but I need a persistent USB stick so I can easily add packages as needed, etc...s.
I put Ubuntu on my G60 hp laptop a few months ago and have not touched Windows 7 since. How do I go about removing windows and leave linux with access to the entire hard drive?
I just installed Fedora 11 on my HP Compaq laptop that had the original factory disk layout (Vista, a big 290GB partition and two other for rescue stuff).
The procedure was the following:
1. I resized the largest partition from 290GB to 270GB using gParted. I could boot normally to Vista after that;
2. Installed Fedora normally using the free 20GB.
After the installation I cannot boot anymore. After the BIOS post the text message shows up:
Non-System disk or disk error replace and strike any key when ready
Did any of you come across this problem before? Is there anything I can do to fix it or at least be able to log into Vista (this is my work laptop...)?
So, I have an old laptop that used to have windows/ubuntu until the drive got fubarred (no physical damage). I shoved the laptop as side as I didn't use it much anymore (it's an old, loud 2.4GHz desktop p4 in a dell--mostly toshiba--laptop. pcmcia atheros based wifi card and an ATI m6 graphics card. Laptop was new back in 2002-03 maybe).The Cdrom drive had died a while back, and it's not worth buying a replacement. The bios doesn't support boot to USB. What are my options for getting Ubuntu on there (9.10 preferably)? The drive has been formatted already, so there is nothing to boot into right now.
I can pull the drive and hook it up to my desktop (windows 7 machine only right now) via USB, and partition it from there, but I'm not sure how to get the installer on there. The MBR of the laptop drive will also have to be rewritten. Is there a way I can create a dos partition, load it with files, and start a linux install that way (maybe with grub4dos or something)?Or can I somehow boot into an ISO image on a partition?The only other thought I have is creating a floppy disk that will allow a network boot, but I haven't looked into that. I basically just want something to bring with on vacation that I can get online with. Browsing from the phone leaves a little bit to be desired.
I recently bought a refurbished HP Compaq NC6000 which had a new installation of Win XP put on it but takes about 5 attempts to boot up as it just sat at the load screen and freezes. So I decided to install Ubuntu 9.10 as a Dual boot with the view to getting rid of XP once I had Ubuntu up and running, which I have now. So cant understand why XP wouldn't work lol. Now I would like to fully get rid of XP and just have Ubuntu as the only OS on the laptop. Currently as it is Dual Boot I have my 80gig Hard drive partitioned with both OS�s on it.
Could someone point me in the right direction of how to get rid of XP cleanly so I just have Ubuntu left on my machine. I don�t really want to re-install Ubuntu as I have spent the last week getting it set up, so would it be possible just to get rid of XP? Also would getting rid of XP mess up the Grub Boot loader menu?
I'm a little bit stuck and in need of advice from people who know what they're talking about. I've had Ubuntu on my office PC, home PC and laptop for about a year now and never had a problem that I couldn't solve, until now. I'd not turned my laptop (Lenovo N 500 with Ubuntu 9.10 64 Bit using GRUB2) on for about a month so when I did on Monday of this week I noticed that I'd not updated Ubuntu for 27 days, so ran the update manager. After everything was updated I carried on using it as normal but when I tried to turn it on yesterday I get the following issue...
GRUB loads and gives me all the possible boot options. Whatever one I choose, I get the same results. It starts to boot (I see the black screen with the white Ubuntu logo) but this remains on the screen for a very long time, then it goes to a flashing cursor at the top left of the screen and it just sits there indefinitely.
I've tried playing with Super GRUB Disc but admittedly I'm not too sure what I'm doing with it. I've tried using the Ubuntu Installation disc as a Live CD too but with no joy. The main HDD appears fine when in Live CD mode, all my files are there etc.. Is this actually a GRUB issue or something else? It's like GRUB's doing its bit and then it's failing slightly further down the line.
I'm totally out of my depth here and really don't want to have to reinstall everything, I'm sure there's a simply solution.
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
I just used Update Manager to upgrade to 10.4 and all I get is the Ubuntu logo screen with the dots and then the screen goes black and there's no other response. This happened after the upgrade completed installing and I received the message to restart the computer. I have never been able to get it to boot.
I can boot fine by selecting the next older kernal although I do get some messages that I don't understand. It all works so I presume it's OK. The kernal that was installed with the upgrade is 2.6.32-24-generic and I've seen other posts about boot problems with it. The laptop is dual boot with Windows XP and Windows boots normally. I saw a suggestion on another thread about booting into an older kernal and then issuing the sudo update-intramfs -u -k command. I tried it and it didn't help.
Next I tried 2.6.32-24-generic recovery mode and I tried the option to fix damaged packages. It seemed to do something although I saw error messages about not being able to find various software sources. I tried a normal boot afterwards and same problem. Recovery mode has another menu option about repairing grub but I don't want to try that. I'm not a power user and this is all over my head. Before I turn the laptop into an unusable door stop,
I'm trying to install Fedorad 9 on my windows Vista dell xps laptop in a seperate partition. I can't seem to make my laptop boot off of the DVD i'm burning the Fedora ISO to. I'm just using Windows, not Nero or anything like that. I've changed the boot options in setup, burned the ISO to the DVD and rebooted but I end up in Windows. By the way, should I just go ahead and use Fedora 10 as a new user or has it been "debugged"? I don't need any additional "new version" problems at this point.
