Fedora Installation :: Can't Install \ Got A Black Screen With A Bunch Of Stuff?

Jul 3, 2009

I made a thread asking if I can install fedora on a compThread:Everyone said yes ( P.S. Im using the LXDE thing that bob said), but when I put the disk in and boot from it.I got a black screen with a bunch of stuff on it and it just repeated every couple of minutes.So, am I stuck on XP? ( had the same problem with ubuntu 8.10, when trying to install).

View 6 Replies


ADVERTISEMENT

Ubuntu Installation :: Found A Bunch Of RPM Package-management Stuff Such As Rpm, Alien, Compiling Tools?

Feb 20, 2010

Pretty much self explanatory:This morning I went into the update manager, and found a bunch of RPM package-management stuff such as rpm, alien, compiling tools, etc. What is up with this?I suspect they are setting the scenery for some big press release saying they now support RPM packages in Ubuntu too. Any ideas? (or better, inside info from someone who knows)

View 3 Replies View Related

Ubuntu :: System Crashed - Got A Black Screen And A Bunch Of Letters And Numbers ?

Aug 6, 2010

I did a system update earlier in the day, but I have a hard time thinking this is connected to it:

I shut down my computer and when I went to start it up, I got a black screen and a bunch of letters and numbers followed by:

Is there something I can do to get back to my desktop? Is there a way I can access my documents, at least?

View 2 Replies View Related

Ubuntu :: Installed 10.10 - Black Screen And A Lot Of Codes And Stuff Pop Up - How To Login

Dec 26, 2010

I just installed Ubuntu 10.10, and I really have no idea how to login. When I first start it up, it is a black screen and a lot of codes and stuff pop up. It says to login, so I do, but I don't know how to get past that. How do I get to the desktop? I have no one else to turn to...

View 6 Replies View Related

Fedora Installation :: X86 64 Black Screen At Install?

Jul 19, 2009

why do i get the black screen at install just after when it loads

View 3 Replies View Related

Fedora Installation :: Black Screen After Fresh Install?

Dec 8, 2009

Ok, I booted with the live cd and used Fdisk to delete all partitions and wipe the drive. I used the "Replace existing Linux system" install option and let it roll. So I reboot to the screen Flashing a _ then just black...System Info:GIGABYTE GA-EP45-UD3L LGA 775 Intel P45 ATX Intel Motherboard Intel Core 2 Quad Q6600 Kentsfield 2.4GHz 2 x 4MB L2 Cache LGA 775 Quad-Core Processor MSI R4850-T2D512 Radeon HD 4850 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video CardSeagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard DriveKingston HyperX 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory Model KHX8500D2K2/2GRYes i did just copy my old newegg orders I'm brand new to fedora as well so I apologize if this a newb mistake.---------- Post added at 05:54 PM CST ---------- Previous post was at 03:41 PM CST ----------Update: I went and wiped the drive again and tried a different install method (use entire drive)After rebooting i spammed esc and got into grub and loaded fedora in nomodeset After going thro all the lisence and reg stuff it prompted me to log in, I did and once again im left with a black screen with a _

View 11 Replies View Related

Fedora Installation :: F13 Black Screen During Install From Any Source?

Jun 26, 2010

trying to install F13 onto an older HP a1610n, which uses an nvidia 6150LE chipset. While booting from the install media, the screen goes completely black. The machine isn't hung, as from the DVD activity LED, it's still dutifully doing its thing, just not letting me see any of it. I'm thinking/hoping some kernel parameters might help, but I can't seem to find out what they would be.

View 1 Replies View Related

Fedora Installation :: 11 Install - Black Screen - IO Apic Error

Jul 9, 2009

I'm trying to install Fedora 11 on a Dell Latitude c810 (PIII 1ghz, 256mb ram, GeForce2 GO)

When trying to boot from the Live CD it goes to the first fedora boot screen where it counts down from 10 then tries to boot.

It then says "IO Apic resources could not be allocated" then moves onto a fedora loading bar which completes... but the next screen is completely black, I've tried letting it stay there for 10 or so minutes but nothing happens.

View 7 Replies View Related

Fedora Installation :: 10 - Graphic Drivers - Screen Showed Only A Bunch Of Colored Vertical Lines

Feb 10, 2009

I recently downloaded and installed Fedora 11 Alpha. I then installed the Nvidia drivers for my Graphics card (GeForce 7800 GTX). I discovered that Fedora 11 is using a Beta version of Xorg and an incompatible ABI. So, my drivers would not work with Fedora 11 without me dowgrading the Xorg server. I decided to reinstall Fedora 10 instead.

I started the install, and when the installation loaded the generic video drivers, my screen showed only a bunch of colored vertical lines. Fedora 10 doesn't allow me to install in text mode.

View 3 Replies View Related

Fedora Installation :: Fresh Install Hangs On Boot / Black Screen Blinking Cursor

Aug 9, 2011

After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).

The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.

View 5 Replies View Related

Ubuntu :: Gnome Installs A Bunch Of Stuff Not Going To Use (email - Office - Games)?

Nov 1, 2010

I'm about to install Gnome on my ubuntu server box (that means, a headless server which I'm gonna access through vnc) I usually just run "apt-get install gnome" But it installs a bunch of stuff I'm not going to use (email, office, games, etc..). All I need is the most basic environment to allow me running programs and their GUIs (browsers, custom software etc), and access it with vnc How do I procced so I have the lightest gnome install possible? That's what I want to do, install gnome and access it through vnc. I'm aware of the number of other options I have.

View 2 Replies View Related

Fedora Installation :: Can't Install FC10 Or FC11 For Desktop With Intel GMA X4500HD Graphics - Screen Goes Black

Jul 20, 2009

I cannot install FC11 or FC10 on my Dell XPS One/A2420 machine. Every time I tried to install the Linux operating system, the screen goes black and the computer goes no response. It seems to have something to do with the video card--Intel GMA X4500HD Graphics.

View 1 Replies View Related

General :: Deleted A Bunch Of Stuff Off My Computer By Pushing The Janitor Clean Up Button

Jan 27, 2010

I made a mistake & deleted a bunch of stuff off my computer by pushing the janitor clean up button how do I restore my computer back to a good connection or what do I have to do to fix the problem

View 7 Replies View Related

Fedora Hardware :: Black Screen \ Can Force A Shutdown, Login And Get The Same Black Screen?

Mar 6, 2010

I was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.

View 14 Replies View Related

OpenSUSE Install :: Black Screen After 1/2 Of Installation?

Mar 2, 2010

I have been using OpenSuse at work for years. My Windows 7 machine crashed on me. Instead of spending the time to fix it, I decided to take the plunge and install 11.2 on my home system. I have 4 one TB drives. My RAID card has a 2x2 1/0 RAID array defined (sdb, sdc, sdc, and sde). A fifth hard drive, outside of the arrary, which is a 250GB drive (sda). It is a software RAID. Here are the partitions I set up in the installer.

On the raid:
1.75 TB on /home
2.01 GB on swap
48.55 GB on /tmp
Off of the raid:
sda1 115 GB /
sda2115 GB /boot

(I know these are really big but I did not want to put any data outside of the RAID) In the final Installation Settings screen, I chose Booting and change from booting from the MBR to the /boot partition. The boot loader type is Grub and the status location is at /dev/sda2. I select Install and it installs without any error message.

After it installs, it restarts and I press ESC to see what is happening. It skips boot.cycle and continues to load to "starting HAL daemon ...done" and then the cursed black screen. I cannot SSH into it. It just sits there and I have to do a hard resest. Once I restart it, it boots into the non-RAD drive I get the follwing error message:

GRUB ..(it went to fast for me to get the rest of it)(hd1/1) message: file not found and I get the option the change the boot options of the Desktop -- openSUSE 11.2 and Failsage -- openSUSE 11.2 . I select e to edit the boot section of desktop and see

root (hd1,1)
kernal /vmlinz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-ST32508...
intrd /initrd-2.6.31.5-0.1-desktop.

I tried changing the root (hd1,1) to 0,1 1,0 2,0, etc with no luck.What do I do? I need to boot into OpenSUSE and finish the cursed installation.

PS: You can tell I work IT with the uber amount of details I put into this

View 6 Replies View Related

Ubuntu Installation :: Black Screen During 10.04 Install?

May 27, 2010

I've been trying to install Ubuntu 10.04 on my Dell XPS 630 but every time i select INSTALL or TRY UBUNTU when booting from the cd, all i get is a black screen with a white blinking cursor. I have tried various options in the F6 menu but nothing has worked. I know the CD is working because I was able to install it inside Windows and dual boot, but I wish to do a fresh install.

View 9 Replies View Related

Ubuntu Installation :: Can't Install 10.04 - Because Screen Goes Black

Sep 13, 2010

I'm so desperate about my problems with installing ubuntu. I got a Fujitsu Siemens Computer AMD Athlon 64 Processor 3200+ 2.01 GHz and 1,50 gb RAM. I got Windows XP home edition on my computer, but i wanna completely switch to ubuntu.

At first I tried to install it with wubi, but it won't work always the same problem.

Then I tried it with the Live CD and tried demo and not install, but it fails. First there is a purple screen with a keyboard and a little guy in a circle, then there's a _ in a black screen blinking, and after that my monitor goes into standby mode. The CD is still loaded from the harddrive, but nothing happens. It feels like the Screen froze down and I can't see anything, what's going on.

I tried it with just installing, alternate install, but it's everytime the same problem.

View 4 Replies View Related

Ubuntu Installation :: Black Log On Screen After Install

Dec 5, 2010

After install I tried to install my video. Which happens to be nvidia and of course after reboot I now get a black screen showing login and password but it will not work I can only get in through recovery. I have a nvidia ge force 9500gt.

View 6 Replies View Related

Ubuntu Installation :: After Install 11.04 Only Black Screen Appear?

Apr 29, 2011

after i installed ubuntu 11.04 and restart .. nothing appear only black screen i think my problem in my vga card ....i have switchable one in my laptop (ATI Radeon HD 5600 /intel )

View 9 Replies View Related

Ubuntu Installation :: Will Not Install - Screen Goes Black

Jun 11, 2011

I boot from my USB, and when I try to install my screen starts showing a bunch of white words while scrolling, then my screen goes black and my laptop stops running even though it is still on. I have also tried just running it, but the same thing basically happens.

View 5 Replies View Related

Debian Installation :: Screen Goes Black On First Boot After Install

Aug 22, 2014

I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.

View 13 Replies View Related

Debian Installation :: KDE Install BLACK Screen On Reboot

Mar 8, 2010

I've just put a fresh install of 64 bit Lenny on my new HP server. All went well so I thought to install KDE. On reboot, the screen just goes black.Could I have some helpful suggestions on how to start working out what the problem could be?

View 7 Replies View Related

OpenSUSE Install :: Black Screen During Installation 11.3 (first Step)?

Jul 20, 2010

I have a problem after "Loading Linux Kernel - 100%".It mean when I chose "Installation" or "Check installation media" after boot screen, I see "Loading Linux Kernel" from 0% to 99% and after that I see only Black screen for long time. Even NUM LOCK key or Ctrl+alt+del has no resultThere is no a problem with 11.2 and 11.1(current OS).Machine: HP xw8400, 2 CPU XEON 3.0Ghz, 4GB RAM, 2x250GB HDD SATA, NVIDIA Quattro FX 1500 256MB.The same problem with VirtualBox (on the same PC).

Last line in "text mode Installation" is :
...
[ 0.040974] Checking 'hit' instruction... OK.

[code]....

View 9 Replies View Related

Install :: OpenSUSE 11.3 Black Screen During Installation / Solve This?

Jan 12, 2011

Configuration: AMD 2500+, 2GB RAM, ATI HD3850 AGP
Problem: Can not install OpenSUSE 11.3. Boot from the disc - the installation screen resolutions, modes of installation - everything is in order. But when the installation can proceed - loading (logo) and just a black screen - possibly the installation goes - but no picture. Also try to set mode "vesa" - loading equipment "ok" ... "ok" ... "ok" ... "ok" ... and again in the black screen.

View 9 Replies View Related

Ubuntu Installation :: Screen Goes Black After Beginning The Install?

Jan 12, 2010

I burned a copy of Ubuntu 9.10 and decided to use it to build up my little server. All was well initially. The CD booted, the language selection came up (I selected English), then there was the option to Try, Install, boot from first hard-drive, etc. I chose install and figured I'd nuke the original drive since everything that I need is off there. The little Ubuntu logo came up (it was shining/pulsating) for about 5 minutes. This went on for some time (the DVD-ROM spinning the entire time furiously) and then..The screen went black and there was a message saying that there was no input to the monitor (as some monitors are prone to do if you unplug/loosen the cable.) I rebooted, burned new CDs, etc. To no avail!

I have an HP (quite reliable in the past.)
* 2.80 Ghz
* 1 gig RAM

View 2 Replies View Related

Ubuntu Installation :: 9.10 - Black Screen During Install On SL510

Feb 1, 2010

I have a Lenovo SL510 thinkpad (CPU 1.80GHz / 2GB / 250GB SATA / Intel GMA X4500 / 15.6" HD LED says the website), totally fresh, just got it today. My goal would be to install Kubuntu 9.10 on this machine. When I try the live CD, screen just goes black, after a while it plays what I assume to be the welcome music. If I try the conventional install screen is just black. The safe graphic mode yielded two grey _, one in the 1/5 and one in the 4/5 of the screen.

View 9 Replies View Related

Ubuntu Installation :: 10.04 Black Screen On The Live CD Or When Trying To Install?

Apr 30, 2010

I want to make a clean install of 10.04 instead of just upgrading from Karmic.However when I run the boot cd I get the new Ubuntu boot up screen (with the five dots) but after a while I get a black screen and at the same time the cd stops running in the drive.The only thing I can do is pressing down the start button until my computer shuts down.I do get the menu to choose to run the live cd or make a new installation, but whatever I choose, I end up with the black screen.

I'm trying to install on an older IBM Thinkpad R50e, with 500 mb RAM so I figured that it was simply just too old to run the new ubuntu. The strange thing however is that the cd is actually running fine from within my Virtual Machine. This I don't get

View 9 Replies View Related

Ubuntu Installation :: 10.04 Install Black Screen After One Minute?

Jul 3, 2010

I am installing 10.04 on a HP pavilion. I have downloaded the ubuntu-10.04-desktop-i386.iso (live CD). When I try to boot or install from it, the screen shows the "ubuntu" with the red dots for a minute and then a black screen with no action from the hard drive or the CD drive. I think it should be asking what language I want but presing enter does nothing.I have been using Ubuntu since 2006 and after yesterday's repartition I installed 6.06 from a live CD so I know I can install from a CD.

View 6 Replies View Related

Ubuntu Installation :: Complete Install Of 10.4 : Old PC/black Screen?

Jul 29, 2010

I'm trying to make a complete install of ubuntu 10.4 on an old PC.When I boot from the CD, a text screen is displayed: "PhoenixBIOS Utility"

Code:
BIODate: 09/14/99
CPU type:celeron

[code]....

View 3 Replies View Related

Ubuntu Installation :: Black Screen After Install U10.04.2 X64 / Resolve This?

Mar 17, 2011

I recently decided to give Ubuntu another try after a break for a while, and have hit a bit of a road block The live CD booted fine, ran, installed, all flawlessly, so it's now a dual boot with Windows 7. Only issue now is when trying to load the HDD installed Ubuntu, it just hangs on a black screen, no HDD activity light or anything. First up my specs code...

Next, what happens in detail:

Machine posts, loads boot loader with OS options. Whether choose Ubuntu or recovery Ubuntu, it always hangs on black screen straight after that.

Next, what I have tried to fix it so far:

Tried pressing 'e' and replacing the quiet splash with nomodeset, same result with both normal flavour and recovery.

Tried copying the xorg.conf from the live CD filesystem to X11 folder on main system drive. Also tried editing it to try and use generic vesa driver.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved