Fedora Installation :: 10 - Graphic Drivers - Screen Showed Only A Bunch Of Colored Vertical Lines
Feb 10, 2009
I recently downloaded and installed Fedora 11 Alpha. I then installed the Nvidia drivers for my Graphics card (GeForce 7800 GTX). I discovered that Fedora 11 is using a Beta version of Xorg and an incompatible ABI. So, my drivers would not work with Fedora 11 without me dowgrading the Xorg server. I decided to reinstall Fedora 10 instead.
I started the install, and when the installation loaded the generic video drivers, my screen showed only a bunch of colored vertical lines. Fedora 10 doesn't allow me to install in text mode.
View 3 Replies
ADVERTISEMENT
Sep 5, 2010
I don't seem to have an "xorg.conf" file.
Gateway SB400a computer with Edubuntu Lucid installed. The problem first cropped up when I installed the Edubuntu packages on Ubuntu. I did a fresh install with Edubuntu and the problem persists. I don't want to go back to Ubuntu since this computer is for my Grandkids and I want to the Edubuntu stuff for them.
I don't have the specs handy, but I can get them. what I have to do to get them. (it happens when you get old)
EDIT: From my xorg.0.log: (--) PCI:*(0:0:2:0) 8086:2562:107b:4000 Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device rev 3, Mem @ 0xf0000000/134217728, 0xffa80000/524288
View 9 Replies
View Related
Aug 3, 2010
Ever since the problem with Flash started up a few days ago, (Videos Lagging/jumpy/jerky horridly.) I decided to finally switch from 9.10 to 10.04...all was going well until a few minutes ago while I was browsing themes and running Konversation, the skin flickered black/green a few times then white vertical lines started appearing down from the top of the screen to about the middle, (Almost looked like the teeth on a haircomb). I had to then shutdown and restart. What id like to know is are the two connected (My earlier flash problem and this) or how I can fix it, so far it hasn't happened again but I'm starting to worry, I've never had problems with Ubuntu until a few weeks ago.
View 2 Replies
View Related
Apr 10, 2010
When I boot up F12, after I have decrypted the hard drives and after the services have started but before I get to the login screen my display flashes a series of interlaced lines across the screen. As far as i can tell theres no other problems with my computer, everything else seems to work fine. Its been there awhile now and its still there after a yum update. On first boot up of the day it shows white/gray lines (firstboot.jpg) [URL]. On subsequent shut down, boot ups it shows a blue, almost denim like display (shutdown.jpg) [URL]. Theres no problem if i just do a restart. Maybe related as well, last week some time my computer froze (opening large file, watching dvd and had firefox open, guess I ran out of memory?) So I did a reboot using the button on my computer, at the point where I usually get the coloured lines it instead showed a snapshot of my desktop just before it crashed. Though this happened after I first noticed the coloured lines.
View 4 Replies
View Related
Apr 3, 2011
I upgraded ubuntu from 10.04 to 10.10 and after upgrading at login screen nothing shows up only white lines. When i was upgrading to 10.10 a message appeared on screen regarding failure to remove fglrx. I wonder if this is the issue. I can still login using the old version but cant go to updated ubuntu
View 1 Replies
View Related
Jul 3, 2009
I made a thread asking if I can install fedora on a compThread:Everyone said yes ( P.S. Im using the LXDE thing that bob said), but when I put the disk in and boot from it.I got a black screen with a bunch of stuff on it and it just repeated every couple of minutes.So, am I stuck on XP? ( had the same problem with ubuntu 8.10, when trying to install).
View 6 Replies
View Related
Mar 1, 2011
Is there a way I can get the clean screen back for when I enter the encryption password during boot? It was quite clean and nice before the drivers but now it just looks awful
View 3 Replies
View Related
Apr 24, 2010
I installed the slack 13 in an old Toshiba Qosmio F10, and everything was ok...but then,like 2 or 3 days after,I got a display problem at boot time: the screen is flashing, in vertical lines,so I read 2 letters,and then the next 2 are flashing. And it can't boot. 'Loading the kernel' is the last message.
I tried booting from the slack cd, the huge.s, but I got the same.
The strange is that if I use an old (very old) live cd, Kurumim 4.0, a dead Debian-based Brazilian live-cd, it boots. And then I have the vertical lines in graphic mode, but the notebook works.
I think that this is a hardware problem, but since it works with an old debian livecd,I suppose it should also be bootable with Slack.
EDITED: Ok,I tried Ubuntu and it couldn't boot,but eith the 'grapfical safe mode' it booted.
Since I can't believe that even Ubuntu would boot, but not the Slack, I tried
Quote:
# VESA frame buffer console @ 640x480x256
vga=769
and it is working...so the problem must be really hardware, the graphic card..Now I will try some others graphic definitions to see which one is the best
View 1 Replies
View Related
May 15, 2010
ive been trying to install 10.4 as a fresh install from a LiveCD. I downloaded the 64 bit ISO (I use Win7x64 normally, my processer is a core2 duo 2.2ghz or something along those lines), booted it up, and it starts loading. after a while, the screen chantges to a massive amount of coloured static. I tried reburning the disc, but it made no difference. Im now redownloading the file and the 32bit version too. Is this a problem anyone else has had, and if it is, is there any way to solve it? I would really like to use the 64 bit version.
View 9 Replies
View Related
May 24, 2010
i recently installed 10.04 after hearing from a colleague that it was highly recommended, however after install, all i get is a black screen with various colors pixels at the tope of the screen. I've been trying to find a resolution, but have nevertheless come up empty, i really need to info that is/was on my desktop (passwords & such).
View 9 Replies
View Related
Jun 24, 2010
I am seeing the Vertical screen wrap problem (discussed in [URL]) on a 64-bit Athlon XP desktop with the Ubuntu version that I installed yesterday (10.04 LTS 32-bit).
Vertical screen wrap, with the mouse pointer offset by a few pixels to the north, taskbar partially visible .
The xserver video amd package version is, xserver-xorg-video-amd 2.11.8-4 and the geode package is, xserver-xorg-video-geode 2.11.8-4. Is it possible that the problem lies in the new geode package (and not the intel/amd driver) ?
View 1 Replies
View Related
May 4, 2011
I'm using the default Ambiance theme with 11.04, but my bottom gnome panel has strange white vertical lines as well as a very light background on active windows. It's almost as if it's using the Clearlooks theme for open applications and Ambiance for everything else. Also when I right click some of the systray items I get weird backgrounds in the tooltip. So far I've tried deleting all my .gnome config folders in my home directory, logging in/out etc. and nothing seems to work. Attached screenshots of the problems.
View 1 Replies
View Related
Jun 29, 2011
I've got 10.04 installed on my Blade 1000 workstation. Installed 6.06 first and worked my way up as per other postings. See attached cookbooks I wrote. Framebuffer is Elite3D-lite, and I have done the afbinit install. Using Xorg w/ Gnome and other windowing software to eliminate the possibility it is Gnome. From what I understand, Ubuntu does not require a custom X11 conf file like OpenBSD.
Current screen output shows large vertical stripes, where the stripes overlay on top of the GNOME desktop. Inside the stripes are the prior boot screen output of Ubuntu 10.04. When the screen saver kicks in, the Gnome desktop disappears, but the blue 10.04 stays visible. Mouse cursor moves across the screen, under each stripe as it goes.
My knowledge of framebuffers is limited. Would this then imply that the framebuffer is not fully "refreshing"? The screen does not provide full width even though the correct OpenBoot monitor configuration is set. Haven't found any mention of this issue from other Ubuntu/Linuxes Sparc users. Attached the X11 log. Looking at the log, I suspect this will need a custom X11 config file.
View 1 Replies
View Related
May 23, 2011
Having trouble with video and windows/links/applications etc on 10.10, just came from windows 7 with everything fine. had 10.04 on my desktop with nvidia card, was easy to get that driver installed, but intel i cant find the correct information. on a laptop, compaq presario cq56. can anyone help out?
View 7 Replies
View Related
Jul 25, 2009
I am new to linux. I install fedora 10 in text mode in my system. Because some drivers didn't support. I don't no know how to install supporting drivers. My system config. are Intel 945 mother board, 512 DDR2 RAM, 80GB IDE hard disk, P4 3GHz processor. When i try to install in graphics mode after disk checking i.e while anaconda is loading my monitor automatically turned off. So I recognized that problem with some driver. So I installed in text mode. Please tell me where do i get drivers for my system and how to install in my system. I don't have Internet connection for automatic installation using yum which was i found from linux forum so kindly tell me manual installation.
View 2 Replies
View Related
Aug 5, 2010
My CPU is i5 760, motherboard is GA-P55A-UD3R, and VGA is GTX460. I installed the WINXP as my first OS with no problem and the performance is nice. Then it turn to CentOS5.4, everything seem good during installation. However, when the installation done and first reboot, I meet problems like "NTLDR missing", so both of WINXP and CentOS can't boot.
View 1 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
May 30, 2011
I followed the guideline 'How to use PreUpgrade' to upgrade F14 -> F15. What happened was that after reboot: 1. The screen was a mess ... no readable information 2. No reaction on pressing 'return' 3. The disk led showed no activity, so I reseted the computer after 5 minutes inactivity. The system came up but with F14. I repeated the 'preupgrade' and all messages are in [URL]... but still F14 comes up after reboot. Where have I missed ... eager to get F15
View 4 Replies
View Related
Jun 13, 2011
Start xpdf or gv. Click an xterm to be active and slide it over xpdf/gv. Vertical lines from xpdf/gv under the xterm stick to the xterm window above and make it unreadable.
The problem does NOT show with KDE default settings with display effects on but does show in fvwm, xfce etc, and in KDE without effects.
On a system with a Sandy Bridge integrated graphics (i5-2400) the problem went away by downgrading to xf86-video-intel-2.13.0. But it was not enough for another system with 945G which needed downgrading to xf86-video-intel-2.12.0.
View 3 Replies
View Related
Aug 1, 2010
I am trying to install lucid lynx on this laptop [URL] and I am getting the blank screen problem at installation. I tried nomodeset, vga=771, xforcevesa and a couple more and nothing seems to work. I have a livecd I burned a couple months ago. If I delete the quiet splash line at the livecd I get some repeating text too fast to see and after a couple of mins the laptop shuts off by itself. what can I do to get lucid lynx working on this pc?
View 2 Replies
View Related
Nov 19, 2009
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
View 5 Replies
View Related
Feb 13, 2010
I'm using Kubuntu 9.10 and I have a problem with my screen. I use the nvidia driver downloaded from the website, installed manually as I always do. I wanted to update it, but when I press ctr-alt-F1 to go to the console to stop kdm, I cannot see the usual black screen, but only a very strange blinking screen with lines and colours, strange symbols like $ & %. This happens for every F1 until F6, then F7 luckily brings me again on the graphical desktop.
I tried to install the drivers from the "Hardware drivers" manager in Kubuntu, but nothing changed. I don't know if it's an issue related to the kernel or to the driver. But I don't know how to update it without F1 console, and however it's a serious issue because I cannot do anything in case of desktop failure. The kernel is the last officially released (I don't use the proposed repos), that is 2.6.31-19.
View 1 Replies
View Related
Apr 22, 2011
I have been experiencing a problem where the screen loads and after initial first few lines breaks up into multiple repetitions of lines. Reloading helps but has to be repeated when pageing down. Mail is no problem; it is supplied by my network provider. OS is openSUSE 11.2 which I update when advised. Below is a sample from the error console:
[Code]...
View 1 Replies
View Related
Jul 20, 2010
After fedora shows in graphic mode, I find my screen blinks. Noisy horizon lines can be observed. Fedora 13 on a Toshiba M355.
View 5 Replies
View Related
Mar 30, 2010
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies
View Related
Nov 8, 2010
i justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
View 9 Replies
View Related
Dec 19, 2010
What has to be done to turn off the blue screen with the white 'sticker' in the middle during boot time?
View 2 Replies
View Related
May 6, 2010
I'm still getting some vertical lines through my splash screen, they are just a little darker purple than the rest of the screen, but disappear over the ubuntu logo/text/dots. I've tried the following from the faq, which made the screen at least show up, which is wasn't doing before.
Bootup/Plymouth.
Users should experience a much faster boot however some users may experience problems with Plymouth after the nVidia graphics driver has been enabled. Users may experience plymouth using lower graphics resolution. [URL]
Graphical solution : [URL]
Command line :
(Some of the fixes put forward dont work for everyone.)
One that works for nVidia and to try is this.
Code:
gksu gedit /etc/default/grub
and add the line in BOLD.
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
GRUB_GFXPAYLOAD_LINUX=1680x1050 Save the file and run
Code:
sudo update-grub
The resolution chosen should be your monitors native resolution.
Other graphics card users may get a black screen with flashing cursor and then a very short duration plymouth. [URL]. One fix for this is to create this file.
Code:
gksu gedit /etc/initramfs-tools/conf.d/splash
and add this option FRAMEBUFFER=y, save the file.
Then
Code:
sudo update-initramfs -u
View 1 Replies
View Related
Nov 13, 2010
The screen info says it is 1280*1024*60Hz.I put this into the nouvou monitors hardware control centre. The screen is too stretched in the vertical. Some icons are cut off at the top.The screen is a V7 videoseven.For some reason the menu controls on the screen only work on the non screen movement icons. I cannot access them .how to get the vertical height corrected? If I have I will go back to the NV proprietary drivers but I would prefer not to do so.
View 2 Replies
View Related
Dec 1, 2010
Since yesterday a constant purple vertical line has appeared on my screen, positioned about 3/4 from the left, which remains even after I reboot.I'm running Ubuntu 10.10 on an Apple iMac (Intel), single boot Ubuntu.
View 8 Replies
View Related
