Fedora Hardware :: Realtek Not Passing Windows Test?
May 3, 2010
about 6 months ago i reformatted my computer, and after it was all said and done i lost my audio in the process, well i tried countless times to fix it and every time i go to install realtek AC 97 it pops up during installation saying "the software you are installing has not passed the windows logo testing to verify its compatibility with the windows XP" i have read many forums and i see this is a frequent problem to some folks.
I started to run a C++ my program in Linux and I don't know how to test my program that works fine with a text file. This is a project for my uni and to explain more clear, My program is a sample database for modify or add and search and it read data from a binary file and also write into a binary file. I have got an input from my lecture and she said after compiling in Linux I must write:
1-to compile: Code: g++ (files with cpp) 2-to see the output: Code: ./a.out 3-to test with input: Code: ./a.out < input.txt >
My problem is in step three. What I must write in the command part after" step2" to see the output?
I need to test network card throughput and speed between two computers, one is running Fedora and other running Windows 7. Usually I would use netperf to perform this task, however I can't find Windows build of netperf. Can anyone recommend any network evaluation tool, similar to netperf (clien/server) which has both Windows and Linux versions.
I have fifteen Audio CDs - an Audiobook - that I haven't used in ages.
I would like to pass them on, but before doing that, I want to check whether they still work flawlessly.
Is there a Windows or Linux program that I can use to quality test a CD? Is possible, with a detailed explanation of any errors it may find, and whether they will cause problems listening to the CD?
How can I pass xml data from memory or a variable to xmllint that expects a file as input? Or does xmllint have the capabilities to read from stin or a variable?
i have the mandatory 50 posts about how 'windoze' is terrible and ubuntu is much better blah blah etc. I need to test some software on a windows XP machine. I have an Ubuntu laptop. When I try to run my XP disc it tries to get going, but inevitably gets to a blue screen of death (ahh, I missed windows).
Ideally I want a dual boot machine- A massive XP partition with a cute little Ubuntu partition on the side. Failing that, I need XP installed on this laptop. Possibly relevant specs are as follows:
i have trouble with my graphical interface, i cant get the window where i can type login and password, its only black, so how can i get into files, an other way to get into the sessio?
I'm a web developer and I am building a site on a CMS that has issues moving from a WAMP server to LAMP. The live server is LAMP and I am running Windows 7. I don't want to run into problems moving from the test server to the live server, so I was wondering if I could somehow run Linux using a virtual machine (using Windows Virtual PC which I think supports Linux or VirtualBox) and then using a Linux equivalent of WAMP2 server as a test server. how to do this and what the best Linux distribution to use would be?
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Installing MySQL system tables... 100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test 100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
I have installed FC13 on my laptop and set it up as a development server. Here is my issue when passing variable from one page to the next it gets lost. My PHP includes work DB connect string works from the include.
I have created mobility of 20 nodes and vbr traffic using following attached script I executed the file as ns234 vbr.tcl I got the vbr.tr and vbr.nam but I was unable to load the graph using matlab <trgraph> I thought problem with is vbr.tcl script.
I have a Samsung N130 with a Realtek 8192 wifi card (possibly 8192e, I'm not sure) and I am trying to run Fedora 12 on it. I used to run Ubuntu until trying their latest beta and realizing it's not very good, so I looked for something else. Ubuntu was at least easy to get the wifi working with just a few quick commands that were written out, word for word, in order, on the Ubuntu forums. I tried openSUSE on here and it didn't have wifi working out of the box either but people on their forums refused to give me actual instructions and just kept bumping me from thread to thread with people giving vague advice or else just telling me I was looking in the wrong place. I'm hoping that someone can give me clear and detailed instructions on how to get this wifi card working. Keep in mind that I am coming from Ubuntu and so I'm not super comfortable in CLI, if I need to do some CL stuff I will need clear and detailed instructions on how to do that.
am currently using Windows 7 across my networked PCs at home.
I've just received my new Samsung N250 Plus Netbook which comes with Windows 7 Starter (yuk). I read a post on Ebuyer from someone who has installed ubuntu on his N250 so thought I'd give it a go tonight.
My main concern is whether my wi-fi card (Broadcom 802.11n according to windows) will work when I remove windows and install ubuntu. I intend to use the netbook for internet use only while working abroad.
Is it possible to test it works by running ubuntu from my USB stick first (without removing windows 7)?
Terry Polzin on the Fedora list today posted a request for help with getting a Realtek 8188S(U) working. I replied saying that I had a similar device and shared my experiences.
I told him that there is a driver in staging which supports the device, but that Fedora only ships quality working drivers by default, so no staging drivers are included. It's easy enough to get them though, just add the RPMFusion Free repository and install their kmod-staging package which (as the name might give away) includes the staging drivers for the current kernel.
Once you have that installed, the r8192s_usb module can be loaded, but the device still needs external (presumably proprietary) firmware to work. Fortunately, although the driver available from Realtek does not include it, it was included on the disk, and is also available in the Billion driver from their website. So, once you have put the firmware in the right place, the device just works.
Here are the steps to get it working (you will need to have RPMFusion enabled, and run these as root).
The main downside here (apart from the obvious) is that you will be relying on RPMFusion to build an updated kmod-staging version when you get a Fedora kernel update. Sometimes this might not happen before you get your kernel, so when you reboot, you lose your wireless (because there's no driver). If so, boot to your older kernel for a while, or build the driver yourself, or create an akmod instead of kmod.
I just checked the Realtek website and they have a new Linux Driver for the RTL8185. The new driver is dated 6/26/2009. So it is quite recent. I would have thought it might have gotten into FC11.
I have 2 questions. Has anyone tried it? What would be the steps to install it?
Out of all the Linux I have tried, this is the only one which will hibernate and startup again properly. But it has no drivers for the rtl2860 wifi adapter. I am thinking of using NDIS wrapper, but it may stop hibernation working. I see a guide which I am going to try to follow, but has anyone out there got this adapter working and hibernation still works?
Installing Fedora13 Kernel 2.6.33 killed my RealTek NIC. I found the following page which helped a little bit: [URL]. Unfortunately the card still does not work.
If I do lsmod | grep r81 I get: r8168 91833 0
So I am not sure the really the new module is loaded. Doesn't anybody have the realtek working with fedora13 ?
is how I added the RealTek 8188CE (or other RealTek drivers) to my newly installed Fedora 14 on a Toshiba Satellite L645D-S4056 laptop. This is assuming you have performed a regular install of Fedora 14 and have done nothing else.
1. Download the drivers at the RealTek download page here:URL...Search for your model in the "Download Search" box and selecting the Linux version of the software. In my case I typed in 8188CE and selected RTL8188CE (Software).
2.Extract the downloaded file into the desired location, open a terminal window, and navigate to the folder where you extracted the drivers.
3.Enable Sudo using the following command:su -echo "username ALL=(ALL) ALL" >> /etc/sudoers.Where "username" is your account username.
4.While still logged on as root, type in the following to install gcc and the kernel headers:yum install gcc kernel-devel kernel-headers patch make exit(From this point you really only have to follow the readme.txt instructions in the drivers folder, but I'll add them here)
5.Change to Super User sudo su
6. Compile driver from the source code make
7. Install the driver to the kernel make install reboot
I hope I'm posting in the right forum here, but I'm trying to install a realtek wireless driver and make goes okay, but when I get to make install it says permission denied when trying to create a file in a folder near the end of the process. Is there anyway to fix this? What can I do?
I've switched from Win 7 to Fedora 15 with Gnome3 four days ago. This is my only experience with Linux. So far I must say I really like it, Gnome3 is very plesant to use. In order to fully enjoy the new system, I'd like some advise to make it fully functionnal. I've got a sound issue:This command:
I am having problems with with a Satellite Pro L500 and FC13. The laptop has a Realtek RTL8192SE wireless adapter, which runs under Win 7 that it came with, but refuses to show itself under FC13.
When I run lshw it shows me:
I looked on the web and this forum for clues and someone suggested installing kmod-ndiswrapper. So I installed the yum rpm-fusion repository and an ndiswrapper for my kernel ------ and nothing's changed.
When I do an lsmod I get:
I've been a Fedora Core bunny since FC3 but I've only recently discovered the wonders of wireless networking and this one has me stumped. I don't fancy being reduced to Windoze when I work from home!
I have just downloaded realtek rtl98192se for my wireless pci card. after extracting the file, the user guide states to go to the top level of the directory and execute the command 'make' to compile the driver
I have done so but I get the error: make: *** /lib/modules/2.6.18-194.el5/build: No such file or directory. Stop. Make: *** [all] Error 2
i use fedora11 and try to use wireless i find driver for chip Realtek RTL8187 but want to know command to install it. i save folder of driver on desktop in folder name rtl8187_linux_26.1010.0622.2006has like this
I have a Biostar TA785GE which as I understand it, has a Realtek 8111DL on-board.
Booting with F11 32-bit DVD, and the F12 Live CD crashes before any user input, with indecipherable text on-screen (text mode, not X11).
Symptoms were the same with the Fedora 11 32-bit installation DVD, the Fedora 12 Live 32-bit CD and the CentOS 64-bit install DVD.
Booting with "linux text" mode (w/CentOS DVD) shows a kernel panic in ":r8169:rtl8169_init_one+0x369/0x9d4" from "pci_device_probe+0x100/0x180". I'll have to shutdown again to try the Fedora CD/DVDs, but if there's a different panic I'll post that tomorrow.
Disabling the on-board NIC allowed the boot to proceed, and get as far as detecting the hard drive partitions (where I stopped it since Ubuntu is installed).
Ubuntu 9.04 Workstation(Desktop?) install DVD worked fine, and I've installed it and am using it to enter this.
From Ubuntu 9.04 on this hardware: "uname -r" shows
Code:
Code:
Code:
Code:
So, my question: if I disable the NIC and install (alongside Ubuntu), will I be able to get the 8111DL working with a Fedora kernel?
I've got Fedora 14 (2.6.35.12-90.fc14.i686.PAE) installed and i'm trying to use hostapd with my Realtek RTL8191S USB WLAN Adapter, but can't get it to work. The driver i'm using is : rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.20100 601.tar.gz
I just installed FC14 on an ASUS Eee Pc with Realtek WNIC (RTL8191SE) and I am trying to install the driver for the WNIC which I downloaded from Realtek's website. There is a problem though during the 'make' command and this is the output
[code]...
what is this 'build' that is looking for? what can I do to fix this?
I have a Windows domain with a proxy. I have an account that can use the proxy and the URL that points to the proxy.pac file. this might seem a stupid question but can anyone tell me how do I enter the username and password for my test Windows account so that Debian can authenticate it?
