Fedora Hardware :: Slightly Different Nvidia Sound?
Jun 20, 2010
I just installed the nvidia drivers and everything looks much nicer but. All my sound works fine, except when I try and get the bell sound (I've not tried others) from the terminal. This is kind of annoying because I want irssi to alert me when I get messages, otherwise I probably would never have noticed.
I really don't know how this could have caused that, but it was working before, isn't now and there does seem to be a lot of reports online of people's sound breaking after installing the nvidia drivers so...
Ok, now that I tried a different set of keywords I realise that this problem seems to have been had by a few other people and is occurs when compiz is on. I'm still not sure I understand it and I don't yet have a solution. :/
View 5 Replies
ADVERTISEMENT
Jul 8, 2010
I have been out of the linux game for a few years and decided to get back into it, I've been working now for a few days on figuring out why my machine's network card does not seem to want to work on a new FC13 installation.The machine is an older Dell Dimension with an 2.53 Gig Celeron Processor, 512 Megs of RAM (A gig soon) and the ethernet card is an Intel Corporation 82562EZ. Sone generic thing, though FC13 does recognize and appears to have appropriate software.
ifconfig shows no IP address in the x.x.x.x sense, and restarting the network doesn't seem to do anything. The network card is in working order, I tested it in a winxp installation, and the cable is also functioning.
View 4 Replies
View Related
Dec 30, 2010
I am currently using an Nvidia GTX 460 gpu, but I just cant get the sound to output to my monitor through the hdmi. I can see that there is sound coming out when running pavucontrol. And I've looked at other guides and no luck. Here is the link to all of my alsa info If you need any more info just let me know,
View 14 Replies
View Related
Apr 19, 2011
I have motherboard Gigabyte GA-M61PME-S2P with nvidia hda sound card and I have no sound output using line in input. I've already tried to compile actual realtek linux driver but it didn't help. It looks ok because using gnome-volume-control I can see that there is music - volume bar is moving - and I can record it but I can't hear that on speaker live. I have also only 2 channel output hardware configuration. Alsa mixer have all channels but changing volume adjust didn't help. some information:
[Code].....
View 6 Replies
View Related
Jul 7, 2011
I`ve problem with my microphone on fedora 14 with Gnome 2. When i try to use alsamixer command there everything is ok. I tried pulseaudio and HDA nvidia sound cards, but microphone don`t work. How to fix this problem?
View 11 Replies
View Related
Jun 18, 2010
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
View 3 Replies
View Related
Aug 5, 2010
Under Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?
View 9 Replies
View Related
Aug 2, 2010
I would use the nouveau driver but the color hue seems to be slightly off. Is there any way to adjust the hue for the driver in real time(I don't want to have to change values in Xorg.conf the stop x, restart x and see if it worked). For example the proprietary nvidia drivers have the color settings in nvidia-settings.
View 2 Replies
View Related
Jul 10, 2011
I've just installed Maxima and wxmaxima. I've learned how to do simple math equations (3x+7=16) but I can't figure out to do slightly more difficult equations. Specifically, I can't figure out what's wrong with how I input this equation:
Code:
solve (7^(-4*x) = 2^(1+3*x), x);
I've tried incrementally building the equation (starting with 7^(x) = 2, then moving to 7^(-4*x) = 2, etc.)but when I introduce the second x, I get a blank output. I have no idea what to do.
View 4 Replies
View Related
Oct 15, 2010
I just installed 10.10 on my dell e1505 laptop. it has an ati radeon x1400 video card. this is my first time using linux on this pc. anyways my problem is that the laptop screen looks a little soft or slightly out of focus. its also very slightly stretched...but just barely. almost to the point you dont notice unless you are looking for it. now i also have an external monitor and it looks perfect. ive tried changing the monitor resolution but it doesnt help and sometimes it makes both screens flicker like its having a seizure! i forgot to mention that sometimes when opening an app or installing an app. the external monitor goes black for a few seconds. the laptop monitor doesnt though.
View 2 Replies
View Related
Mar 24, 2011
I tried ubuntu 10.0 yesterday (running from my usb pen) and I liked it. A lot. However, there are a few issues that i need to know if there's any way to solve them, before making the transition: Keyboard keys are swapped; I mean, if I press alt+(anyNumber) I get another character. Why does this happen?-I develop a lot of code in VBA; I tried to record a macro using Open Office Calc, but I got the impression that the code used in the recorded macro is slightly different.
View 9 Replies
View Related
Mar 19, 2011
Summary: Several school networks in need of a fairly low-level way to log network use, especially Internet. Raw packet captures are too low (and big). Turnkey solutions we've looked at (Untangle) aren't really a good fit. This seems like a common issue. Detail: For legal reasons, we have to be able to roll back time every so often (ie. when death-threats are made on some web-forum). Currently, our traffic logs on Internet traffic are pretty high-level and aren't really useful to point a finger at the guilty or away from the innocent. We also like to keep our users honest by providing them with data about their own computer use (ie. what are the top 10 websites they hit).
I've been building up rules with iptables and ulogd to log the creation of new connections and save it to a PCAP formatted file for consumption by some very simple analysis scripts, or examination with Wireshark if required. Just logging new connections prevents the logging data from getting large in a hurry, but also doesn't give us a lot of information we would like (ie. the amount of data transferred). We've been examining products that offer fairly full-featured analysis, notably Untangle, but we do a lot of weird stuff (VOIP, VC, VPNs) with traffic flowing through very minimal hardware (PC Engines) running Linux. This is very inexpensive and very flexible, and we like it that way.
View 3 Replies
View Related
May 4, 2011
I'm having a problem with vim and xterm. When I open a file and press any key, the colour scheme changes slightly. This doesn't happen if I run a 256-colour xterm (export TERM='xterm-256color') but if TERM is set to 'xterm' (the default) I see the colour change. Setting TERM='xterm-256color' in my ~/.bashrc is a "solution", but I'd rather not have to do that since it's never been necessary in the past (e.g., on 13.1) and I don't use any 256-color schemes for vim (usually just the default or possibly "delek"). It doesn't happen with rxvt or with Xfce's terminal. I've tried compiling some other versions of xterm but they either exhibit the same behaviour or don't build. I have tried running without any ~/.vimrc file just to be sure it wasn't one of my settings and I've also tried the sample file at /usr/share/vim/vimrc; the effect is the same.
View 10 Replies
View Related
Jul 27, 2011
Running 11.04 64bit. AMD Radeon HD 6450 with proprietary drivers.
This is a new PC that I got a few weeks ago. Up until tonight, there have never been any issues. I earlier had an update for dbus and dbus-x11 which prompted me to reboot. After rebooting, I am noticing some mild to severe problems when gaming.
It's like there's a jitter, yet the ingame fps (frames per second) is normal. Window dragging on the desktop looks fine, but dragging the unity launcher up/down looks slightly jittery too.
Thinking it was just some sort of Unity/compiz problem, I booted into Classic desktop with no effects. Issue still persists.
Really want to fix this, as it's a pretty annoying issue =/
I realized it seems to have caused issues with scrolling too. Scrolling does not look smooth and is also jittery.
View 7 Replies
View Related
Jan 7, 2010
I can't find kmod so I'll go for the Nvidia installer from [URL]. I tried to run it Quote: su -c 'sh NVIDIA-Linux-x86-XYZ.AB.pkg1.run' but it wants me to kill xserver. How can I do that? " gdm stop" will kill Xserver too? How will I start it again?
View 3 Replies
View Related
Jan 22, 2010
I installed Fedora 12 nowdays and tried to install the driver as Leigh posted in here: [URL]...Well i had some depadency trouble by installing kmod-nvidia and xorg-x11-drv-nvidia-libs.i686. I enabled rpmfusion repo of course. I don't have anything isntalled just the base programs what fedora installs. I updated the kernel and installed kernel-devel aswell.
This is what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
warning: /var/tmp/rpm-tmp.fNroQP: Header V3 DSA signature: NOKEY, key ID 49c8885a
warning: /var/tmp/rpm-tmp.zdIa6C: Header V3 DSA signature: NOKEY, key ID b1981b68
[Code]...
View 1 Replies
View Related
Feb 5, 2009
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
View 1 Replies
View Related
Jul 4, 2010
I made an ubuntu live usb with a 2gb persistent casper rw using pendrive linux's portable installer. this works fine on most computers, but on my laptop, it boots just fine, but the screen is divided with little lines and overlaps slightly on the righr into the left(pic included). the laptop in question is an hp pavillion dv2000 special edition.
View 2 Replies
View Related
Aug 10, 2010
I'm developing some apps on my Ubuntu 10 box. Firefox appears to be applying its own theme to the web page (ex the form inputs are slightly rounded). I need to view this as a browser typically would as the users of the app will be on various hosts. The default theme appears to be uninstall-able and appears to be called Tango.
View 3 Replies
View Related
Nov 28, 2010
I Have just formatted to Fedora 14 64bit and installed kmod-nvidia akmod-nvidia and am experiencing visual lag. The lag did not occur before I installed the drivers, neither did it occur on Fedora 13 with drivers installed.
I have a priitty high spec pc with the nvidia 260 gtx.
just remove xorg-x11-drv-nvidia-libs-260.19.12-3.fc14.i686
so now:
View 1 Replies
View Related
Jul 30, 2010
I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
View 2 Replies
View Related
Mar 12, 2010
I've tried to install nvidia drivers using this commands:
Quote:
yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig
After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.
My GPU is nvidia gtx 280:
Quote:
[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)
My kernel is:
2.6.32.9-70.fc12.i686
View 4 Replies
View Related
May 30, 2010
i did something wrong and i was left with one way and that was reinstalling fedora core 12 so i don't want to do the wrong way one more time,what is the difference between kmod-nvidia and akmod-nvidia?i did yum -y install akmod-nvidia and then type xconfig-nvidia on the terminal,after logging off i confront with a blank screen,so i reinstall fc12 x86-64.from what i've understand this is what i should do?
1:yum update
2:setsetbool -P allow-execstack on ==> in order to lower your system protection so SElinux doesn't prevent the driver from loading
3:if it's standard kernel type use komd-nividia and for PAE kernel type use kmod-nvidia-PAE
4: Keep nouveau from loading so
su -c 'mv /boot/initramfs-$(uname -r).img /boot/initramfs-$(uname -r)-nouveau.img'
and
su -c 'dracut /boot/initramfs-$(uname -r).img $(uname -r)'
5:To use the default initrd, but disable the nouveau driver, edit /etc/grub.conf and add the following to the end of the line(s) starting with 'kernel':
rdblacklist=nouveau
if these are right!will yum update command update everything?as i'm still on dial up.i couldn't find kmod-nvidia with command yum install kmod-nvidia [although i had rpmfusion free&nonefree but i did not execute the yum update command before that,is this the reason that yum could not find the komd-nvidia?
View 6 Replies
View Related
Dec 8, 2010
I have an NVIDIA video card attached to my LG plasma TV by vga cable. My display is offset slightly with some of the left-most and top-most area of the screen out of range with an equal amount of black/unused screen to the bottom and right. Is there a way for me to recalibrate my display to correct for this?
View 2 Replies
View Related
Jan 2, 2011
Using Ubuntu Maverick and Totem, DVD playback has a slightly shaky picture and a little static at the top and bottom of the picture. Also, top level menus sometimes don't display, or the menu displays but movie won't play, or just nothing happens when trying to play a DVD movie. This problem is happening on two completely different boxes with clean installs. DVD playback seemed OK on Kubuntu and Xubuntu 10.10, as was OK on 10.04. Is this a known issue? And if so, is there a patch?
View 4 Replies
View Related
Jun 7, 2010
I recently installed Squeeze. I had sound with the video driver that came with the install. Then I installed the Nvidia driver from Nvidia website. The sound dissappeared. When I uninstalled the Nvidia driver and removed xorg.conf and rebooted again, the sound came back. Then I installed the Nvidia driver from (nvidia-glx, dev and settings) from Debian with Synaptic. The sound went away again. If I uninstall the nvidia driver and xorg.conf the sound will probably come back again. The sound driver is the one that came with the install.
The volumes are unmuted in the alsamixer. Somehow alsaconf command does not work.
My mother board is a ASUS M4N78 Pro with Nvidia IGP.
What can I do to have sound with the nvidia driver?
View 14 Replies
View Related
Jan 4, 2010
I am having trouble getting sound over hdmi with my Nvidia MCP7A HDMI. The strange thing is that everything works fine in a Live disc, but once I do a fresh install of that Live disc I get no sound, even though my configuration is exactly the same (as far as I can tell). I've checked the little things like alsamixer volumes, aplay -l, etc etc. Everything looks good to me. I can reproduce on multiple TVs so its not the receiver. Video drivers are the same in both live version and installed. aplay -l detects my device. sound/pci/hda/patch_nvhdmi.c already has my correct vendor id in it. Perhaps the following info can figure out what my installed environment is lacking.
Live Disc Info
Hardware
View 2 Replies
View Related
Jan 26, 2010
I recently installed ubuntu 9.10, today actually, and I can't seem to make the audio work. I read a lot of threads, but no luck with this..
View 7 Replies
View Related
Mar 30, 2011
So I have been working for three days now trying to get audio from my hdmi connection on my Nvidia 430gt. I have followed several threads from begininnig to end with NO resolve. Has anyone had this happen with this card and this version of ubuntu because I cant find anything anywhere. My bud( that has linux experience) has been helping me but I have nearly burnt him out....working on this.
View 1 Replies
View Related
May 6, 2011
coming back to Ubuntu after not liking v8, installed 10.10 and upgraded to 11.04 during install process. I have a nvidia GTX 250 running video to a monitor and a tv and wanted to use my green center channel analog out on the back to send audio to the tv. (no room for hdmi, had to use VGA).
I can't enable sound, I've Googled the crap out of this and have found my sound to be nVidia MCP51.
I'm not very Linux savvy, so if you need me to run commands please let me know what they are. Thank you for your assistance.
View 9 Replies
View Related
