So I have been working for three days now trying to get audio from my hdmi connection on my Nvidia 430gt. I have followed several threads from begininnig to end with NO resolve. Has anyone had this happen with this card and this version of ubuntu because I cant find anything anywhere. My bud( that has linux experience) has been helping me but I have nearly burnt him out....working on this.
View 1 RepliesI am having trouble getting sound over hdmi with my Nvidia MCP7A HDMI. The strange thing is that everything works fine in a Live disc, but once I do a fresh install of that Live disc I get no sound, even though my configuration is exactly the same (as far as I can tell). I've checked the little things like alsamixer volumes, aplay -l, etc etc. Everything looks good to me. I can reproduce on multiple TVs so its not the receiver. Video drivers are the same in both live version and installed. aplay -l detects my device. sound/pci/hda/patch_nvhdmi.c already has my correct vendor id in it. Perhaps the following info can figure out what my installed environment is lacking.
Live Disc Info
Hardware
I have 3 problems here that are kind of rolled into one. I will explain. They refer to my HDA Nvidia ALC 888 Sound card, Various software that comes bundled with new digital cameras, and drivers for my blood/sugar meter connected to the PC. (I am diabetic).
Senario:----- I am an experianced Windows user and have lately been looking into Linux. Having made up my mind to go for Ubuntu, I had a transition period where I was running both os. I am now pleased to say that I am now windows free and running totally Linux Ubuntu.
My problems are with the drivers for the above devices. In Windows (7) all of the devices ran perfectly, The sound card worked superbly with dolby and a host of other options. In Linux, the same sound card I dont think was picked up. It is as if I have just a generic driver giving me sound. I am still getting good sound, dont get me wrong but it just does not have that extra bite that I know the HDA Nvidia ALC 888 can produce. That I believe is the hardest question to solve..... Phew!
The other 2 are both very connected. One is the numerous software that comes bundled with new digital cameras that I have a habit of buying and the other is the software to my Roche Industries Blood/Sugar meter. I have phones Roche and they told me straight that their software does not run on Linux or Mac. As for the camera software, there are too many to mention here.
Given the 3 problems, would it be suggested I find a space on my h/d to re-install Win 7 for the said items as then I could still keep Linux as my main os. I would then have to go into Windows to play music for the real rich sound? Or, is there something I can do to get full use of my sound card in Linux?
I have been looking for 3 days now on various parts of this forum and though I have found several interesting posts, I have found none relevant to my case. I read that I could try to use OSS, I barely know what that means, if I am running it or how I get it and if I can get it how do I switch over from whatever I am using at the moment, whatever that is.
My Computer and os details are as follows... Acer Aspire x3000, AMD Phenom II x3 710 processors, 4gig RAM, 450gig h/d, Linux Ubuntu 9.10, Kernal 2.6.31.20 generic-pae, Gnome 2.28.1
I feel that as I have problems with my Blood/Sugar meter it is going to be suggested that I install a small version of windows on this computer, that would certainly solve all three problems at a stroke but I am reluctant to install windows again unless I really have to, but would like the opinions of people that know a lot more than me.
I have seen several posts on various message boards that touch on the no sound over hdmi on nvidia cards issue (mine is an 8400 gs) and the general consensus seems to be create a custom edid and tell x to use it. So here is the heart of the post: I downloaded http://analogbit.com/sites/default/file /edid_disable_exts_v1.2.tgz to modify my edid but I don't know what to do with it. I extracted it and tried $ make and $ sudo make install But that wasn't the ticket,
View 1 Replies View RelatedI'm trying to get sound working in ubuntu 10.10 via the HDMI connection in my nvidia GTX 460.Currently when I first boot up I get no sound at all but I can manually sort this by:
1) Using alsamixer to unmute "S/PDIF 1" on the nvidia card
2) Play a sound through the card with
Code:
aplay -Dplughw:1,7 /usr/share/sounds/alsa/Front_Center.wav
From here on the sound works but there is some form of tinny distortion.
Therefore I have two issues
1) How to make the card work automatically on boot up
2) Solve the sound distortion I'm getting
For issue 1 I believe that this is because the nvidia card is not the default sound device. The way I have seen to fix this is to put an option on the module loaded in /etc/modprobe.d/alsa-base.conf as below...
Code:
options snd-C index=0
options snd-A index=1
However as you can see from the configuration information attached they both use the same driver so I don't think this will work. I know very little about sound on Linux but I have read many posts and can't find any solutions to my issues.
This is not a deal breaker for me, but it is annoying. I'm running 10.04 and have an eVGA GeForce 210 card. I'd like to install the restricted video driver, since watching full screen video is extremely choppy. The problem starts when I install "nVidia version current" (only one available) from the Hardware Drivers. I reboot, and I have no sound. Video works wonderfully! But, no sound. I check, and basically it seems to be indicating that I simply do not have any choices for enabling sound. y sound is onboard from my Gigabyte EP43-UD3L motherboard. I've disabled the video driver, since I would rather have sound with small screen video than no sound at all.
View 1 Replies View RelatedI have a zotac IONITX motherboard with HDMI video. The video seems fine, but I haven't been able to get the sound working through the HDMI cable. Even the little speaker at the top is gone. It was working fine when I had speakers hooked to the motherboard. I have installed the latest 256 driver from nvidia. If I run 'aplay -l' I get this:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
Subdevices: 1/1 Subdevice #0: subdevice #0
lspci -v gives :
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1) Subsystem: PC Partner Limited Device 437b
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at fae78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
I don't know if this is important, but I noticed that it says its running an intel driver for my nvidia sound. Could this be the problem and if so, How do I fix it? Also, if I click on system->preferences->sound it comes up with a dialog box that says that its waiting for the sound system to come up. Why I am not getting any HDMI sound or even the little speaker icon at the top?
The old Nvidia GT220 recently died in my HTPC and I replaced it with a new GT430. Sound over HDMI worked beautifully with the old card (after much trial & error,) but has now stopped working with the new card.Forgot to mention that everything appears to be unmuted in alsamixer. When I run "aplay -D plughw:1,3 /usr/share/ sounds/alsa/Front_Center.wav" I get no sound. I do however get sound from the headphone jack when I do the same command for the onboard sound card (0,0)
View 1 Replies View RelatedSound should be easy. Far more easy than video, but i experience more problems with sound, than with my Nvidia GFX-card.It seems OpenSUSE use several type of sound-systems like Alsa-sound, Pulseaudio and OSS. Then its somthing called Xine and GStream that i've never heard about.I have OpenSUSE 11.3 64bits with KDE4.6.1What should i use and what can i uninstall?Now it seems i'm using PulsAudio with Xine-backend.
View 3 Replies View RelatedI am at the end of my tether in trying to get sound setup on my Ubuntu installation. I have tried many different 'fixes' that people have suggested, but none seem to work!
My setup is as follows:
> HP Proliant Microserver
> Ubuntu 10.10
> Zotac GT210 card
> HDMI from GFX card to AV amp
> 5GB Ram
What I want to be able to do is:
> Play music from FLAC files I have ripped in either stereo or sudo 5.1
> Play DVD iso files that I have ripped in the audio format found on the original discs (DTS etc)
I have managed to get sound working before, but only in stereo and I couldn't get it working in XBMC (not the sound from the main movie I chose anyway). I have since completely broken the sound after trying various things found on the interweb and cannot get it back.
[Code]....
I'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
I recently installed ubuntu 9.10, today actually, and I can't seem to make the audio work. I read a lot of threads, but no luck with this..
View 7 Replies View Relatedcoming back to Ubuntu after not liking v8, installed 10.10 and upgraded to 11.04 during install process. I have a nvidia GTX 250 running video to a monitor and a tv and wanted to use my green center channel analog out on the back to send audio to the tv. (no room for hdmi, had to use VGA).
I can't enable sound, I've Googled the crap out of this and have found my sound to be nVidia MCP51.
I'm not very Linux savvy, so if you need me to run commands please let me know what they are. Thank you for your assistance.
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View RelatedI recently updated my computer Using 9.10 and I updated on the 14th. Before the update my sound was working great. No problems, but afterwards my sound is completely gone and under hardware when I click the sound option on the speaker icon I get nothing listed under hardware.
I am using the HP DV2810 US notebook PC. With this being listed as the audio device.
I will also list the updates from my synaptic history. I'm having to use Win7 . And i only wanted that for the few games that one run well in wine.
Upgraded the following packages:
Installed the following packages:
I just did a complete reinstall of my dualboot system hoping it was user error that caused my audio problems, but the issue has followed me to this install. This tells me that is probably application based.
my Via VT1708/A device tends to disappear from my system. it started shortly after setting up TVTime.When i restart the system my usb headset and vt1708 show up ok, but after a while the vt1708 will disappear and i can't get sound to pipe from the cd line to the usb headset. this makes watching tv a no joy situation.i checked my syslog and found this:
[Code]...
I'm running Kubuntu 9.10 X64, and am using ALSA for my sound. I have no trouble with sound: VLC, Adobe's Flash plugin, Java, etc. all work properly. When I run the Gnash standalone player, sound does not work at all.
When I run Gnash in a terminal, I get this:
Quote:
Under 10.04, I was using my sound card just fine, but after a system update,I lost all my sound profiles and my sound. I'm using my mobo's SPDIF ( I have an ASUS p7p55d).
View 1 Replies View RelatedI recently had a brain cramp and told Phonon to forget my sound card(s). I have an on-board card and I have installed an old-school Sound Blaster CT-4832. I have followed the steps listed in the comprehensive sound trouble shooting, and still no luck!
Code:
gentle@Desktop:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]...