Ubuntu :: Ati X1400 - Screen Looks Soft And Slightly Stretched - 10.10
Oct 15, 2010
I just installed 10.10 on my dell e1505 laptop. it has an ati radeon x1400 video card. this is my first time using linux on this pc. anyways my problem is that the laptop screen looks a little soft or slightly out of focus. its also very slightly stretched...but just barely. almost to the point you dont notice unless you are looking for it. now i also have an external monitor and it looks perfect. ive tried changing the monitor resolution but it doesnt help and sometimes it makes both screens flicker like its having a seizure! i forgot to mention that sometimes when opening an app or installing an app. the external monitor goes black for a few seconds. the laptop monitor doesnt though.
View 2 Replies
ADVERTISEMENT
Nov 13, 2010
The screen info says it is 1280*1024*60Hz.I put this into the nouvou monitors hardware control centre. The screen is too stretched in the vertical. Some icons are cut off at the top.The screen is a V7 videoseven.For some reason the menu controls on the screen only work on the non screen movement icons. I cannot access them .how to get the vertical height corrected? If I have I will go back to the NV proprietary drivers but I would prefer not to do so.
View 2 Replies
View Related
Dec 16, 2009
I was trying to run a program, needs high graphic, suddenly my computer crashed. I had to restart it, now the resolution has changed, I mean its the same as before "1024x768" but the screen has been widened, it looks like it has been stretched, and zoomed. I changed the resolution, but it didn't help.
View 5 Replies
View Related
Jul 4, 2010
I made an ubuntu live usb with a 2gb persistent casper rw using pendrive linux's portable installer. this works fine on most computers, but on my laptop, it boots just fine, but the screen is divided with little lines and overlaps slightly on the righr into the left(pic included). the laptop in question is an hp pavillion dv2000 special edition.
View 2 Replies
View Related
Dec 8, 2010
I have an NVIDIA video card attached to my LG plasma TV by vga cable. My display is offset slightly with some of the left-most and top-most area of the screen out of range with an equal amount of black/unused screen to the bottom and right. Is there a way for me to recalibrate my display to correct for this?
View 2 Replies
View Related
Sep 24, 2010
I have Ubuntu (running Jolicloud) on my HP dv2000 laptop, connected to my Sony AV Receiver through HDMI to use the TV as an external monitor. However, the resolution seems to be slightly off as the outer edges of the screen are cut off. Is there a way to fix this by editing the xorg.conf file? My current setup is below. I tried adding the line "Virtual 1244 700" to the subsection "display", but when I restarted it threw me into low graphics mode. Is there anything else I can try?
I also tried setting up the resolution at 1920x1080 on the TV and kept the default resolution on the monitor as 1280x800, and as you would expect displays the entire desktop in a smaller version on part of the tv. However, the desktop is still offset, leaving the top and left margins cut off. So, perhaps I need a way to offset the screen? Is this possible in xorg.conf?
View 8 Replies
View Related
Feb 8, 2010
Installed Skype latest version on a Mythbuntu 9.10 pretty vanilla install. Tried testing the microphone with it, after getting into AlsaMixer and enabling the mic and such, I got it playing back something but it is like stretched out, so playback goes really slow and deep. what can I do that is more basic for testing the mic to remove Skype from the equation. Mythbuntu is really pared back, so I will likely have to install, I like to keep it to the minimum. What is the easiest way most people test a mic? Second, just in general, what could cause this to act this way. I don't see anything in the mixer that makes me think it is causing it
View 1 Replies
View Related
May 21, 2011
i have a hp laptop with a cracked screen so i'm using and external monitor. It is an HP vs15c. Now it was working fine.. perfect even.. until i was working on a second virus infect pc in bed with the keyboard connection to this pc next to me. What happened next is a bit embarrassing and also why i have no idea what i did or how to fix it. Well i found the virus in the laptop i was repairing (god i hate vista.) when i wiggled in excitement .. only the keyboard slide under my breast and the next thing i know my screen looks stretched and i have no bars. i can move my mouse beyond the right and the bottom edges of the screen and i can't change anything cause i can't get any option.. or least i don't know how to get them without the bars.. i can't even reboot if i wanted to cause my task bar is GONE. the bottom active bar is there.. off screen where i can see it but if i drag my mouse down far enough it is there to click on things. However the top bar that i need is gone. I am NOT good with terminal.. nor do i know how to open it without the top task bar. Right now i'm cursing a storm and being very angry about being a woman.
View 14 Replies
View Related
Mar 6, 2010
installing ATI Mobility Radeon x1400 driver on 9.10?
View 9 Replies
View Related
Feb 16, 2011
who has installed these drivers on ubuntu will help me to install ? Because I can not coped...
ati mobility radeon x1400 driver
need me 32bit driver... I found only 64 ...
View 2 Replies
View Related
Apr 30, 2011
I would like to use my S-video connection on my ATI Mobility Radeon x1400 Laptop but I don't know how to do it. Could someone help please? I have never tried to use it before so I cannot tell whether it worked with previous versions.
I am using Natty.
Here is what I get with the command xrand. code...
View 2 Replies
View Related
Jul 23, 2011
From the wiki page I know the ATI Mobility Radeon X1400 card is no longer supported by the new fglrx driver in squeeze. Is there a way to use the older driver from lenny? I'm on the radeon driver and the glxgrears performance is pretty low.
View 2 Replies
View Related
Feb 20, 2011
I can see some soft links in /etc directory which are pointing to /etc/rc.d Directory contents.
Code:
lrwxrwxrwx. 1 root root 7 Jan 31 08:19 rc -> rc.d/rc
lrwxrwxrwx. 1 root root 10 Jan 31 08:19 rc0.d -> rc.d/rc0.d
lrwxrwxrwx. 1 root root 10 Jan 31 08:19 rc1.d -> rc.d/rc1.d
code....
Any body please tell me what is the purpose of these soft links in /etc directory ? I am using RHEL 5.4 ...
View 3 Replies
View Related
Mar 6, 2010
I have been using slackware for a few years now and just made a jump from 12.1 to 13.0 recently on my Dell Inspiron 6400 laptop. Everything seems to be working great except for the video players. When I try to start xine I get the following error:
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 135 (XVideo)
Minor opcode of failed request: 19 ()
Serial number of failed request: 1977
[Code].....
View 8 Replies
View Related
May 24, 2010
I have recently installed 10.04 on my Fujitsu E8210 laptop and now have a problem with the flickering and noisy screen. I have narrowed down the issue to my ATI mobility Radeon x1400 drivers and seen a suggestion to install Gallium3D drivers. Up 'till now I have installed new kernel from [url].
And now am looking for directions on how to install Gallium3D drivers for my video card.
View 9 Replies
View Related
Aug 2, 2010
I would use the nouveau driver but the color hue seems to be slightly off. Is there any way to adjust the hue for the driver in real time(I don't want to have to change values in Xorg.conf the stop x, restart x and see if it worked). For example the proprietary nvidia drivers have the color settings in nvidia-settings.
View 2 Replies
View Related
Mar 24, 2011
I tried ubuntu 10.0 yesterday (running from my usb pen) and I liked it. A lot. However, there are a few issues that i need to know if there's any way to solve them, before making the transition: Keyboard keys are swapped; I mean, if I press alt+(anyNumber) I get another character. Why does this happen?-I develop a lot of code in VBA; I tried to record a macro using Open Office Calc, but I got the impression that the code used in the recorded macro is slightly different.
View 9 Replies
View Related
Jul 27, 2011
Running 11.04 64bit. AMD Radeon HD 6450 with proprietary drivers.
This is a new PC that I got a few weeks ago. Up until tonight, there have never been any issues. I earlier had an update for dbus and dbus-x11 which prompted me to reboot. After rebooting, I am noticing some mild to severe problems when gaming.
It's like there's a jitter, yet the ingame fps (frames per second) is normal. Window dragging on the desktop looks fine, but dragging the unity launcher up/down looks slightly jittery too.
Thinking it was just some sort of Unity/compiz problem, I booted into Classic desktop with no effects. Issue still persists.
Really want to fix this, as it's a pretty annoying issue =/
I realized it seems to have caused issues with scrolling too. Scrolling does not look smooth and is also jittery.
View 7 Replies
View Related
Jun 20, 2010
I just installed the nvidia drivers and everything looks much nicer but. All my sound works fine, except when I try and get the bell sound (I've not tried others) from the terminal. This is kind of annoying because I want irssi to alert me when I get messages, otherwise I probably would never have noticed.
I really don't know how this could have caused that, but it was working before, isn't now and there does seem to be a lot of reports online of people's sound breaking after installing the nvidia drivers so...
Ok, now that I tried a different set of keywords I realise that this problem seems to have been had by a few other people and is occurs when compiz is on. I'm still not sure I understand it and I don't yet have a solution. :/
View 5 Replies
View Related
Jul 10, 2011
I've just installed Maxima and wxmaxima. I've learned how to do simple math equations (3x+7=16) but I can't figure out to do slightly more difficult equations. Specifically, I can't figure out what's wrong with how I input this equation:
Code:
solve (7^(-4*x) = 2^(1+3*x), x);
I've tried incrementally building the equation (starting with 7^(x) = 2, then moving to 7^(-4*x) = 2, etc.)but when I introduce the second x, I get a blank output. I have no idea what to do.
View 4 Replies
View Related
Aug 10, 2010
I'm developing some apps on my Ubuntu 10 box. Firefox appears to be applying its own theme to the web page (ex the form inputs are slightly rounded). I need to view this as a browser typically would as the users of the app will be on various hosts. The default theme appears to be uninstall-able and appears to be called Tango.
View 3 Replies
View Related
Jul 8, 2010
I have been out of the linux game for a few years and decided to get back into it, I've been working now for a few days on figuring out why my machine's network card does not seem to want to work on a new FC13 installation.The machine is an older Dell Dimension with an 2.53 Gig Celeron Processor, 512 Megs of RAM (A gig soon) and the ethernet card is an Intel Corporation 82562EZ. Sone generic thing, though FC13 does recognize and appears to have appropriate software.
ifconfig shows no IP address in the x.x.x.x sense, and restarting the network doesn't seem to do anything. The network card is in working order, I tested it in a winxp installation, and the cable is also functioning.
View 4 Replies
View Related
Mar 19, 2011
Summary: Several school networks in need of a fairly low-level way to log network use, especially Internet. Raw packet captures are too low (and big). Turnkey solutions we've looked at (Untangle) aren't really a good fit. This seems like a common issue. Detail: For legal reasons, we have to be able to roll back time every so often (ie. when death-threats are made on some web-forum). Currently, our traffic logs on Internet traffic are pretty high-level and aren't really useful to point a finger at the guilty or away from the innocent. We also like to keep our users honest by providing them with data about their own computer use (ie. what are the top 10 websites they hit).
I've been building up rules with iptables and ulogd to log the creation of new connections and save it to a PCAP formatted file for consumption by some very simple analysis scripts, or examination with Wireshark if required. Just logging new connections prevents the logging data from getting large in a hurry, but also doesn't give us a lot of information we would like (ie. the amount of data transferred). We've been examining products that offer fairly full-featured analysis, notably Untangle, but we do a lot of weird stuff (VOIP, VC, VPNs) with traffic flowing through very minimal hardware (PC Engines) running Linux. This is very inexpensive and very flexible, and we like it that way.
View 3 Replies
View Related
May 4, 2011
I'm having a problem with vim and xterm. When I open a file and press any key, the colour scheme changes slightly. This doesn't happen if I run a 256-colour xterm (export TERM='xterm-256color') but if TERM is set to 'xterm' (the default) I see the colour change. Setting TERM='xterm-256color' in my ~/.bashrc is a "solution", but I'd rather not have to do that since it's never been necessary in the past (e.g., on 13.1) and I don't use any 256-color schemes for vim (usually just the default or possibly "delek"). It doesn't happen with rxvt or with Xfce's terminal. I've tried compiling some other versions of xterm but they either exhibit the same behaviour or don't build. I have tried running without any ~/.vimrc file just to be sure it wasn't one of my settings and I've also tried the sample file at /usr/share/vim/vimrc; the effect is the same.
View 10 Replies
View Related
Jan 2, 2011
Using Ubuntu Maverick and Totem, DVD playback has a slightly shaky picture and a little static at the top and bottom of the picture. Also, top level menus sometimes don't display, or the menu displays but movie won't play, or just nothing happens when trying to play a DVD movie. This problem is happening on two completely different boxes with clean installs. DVD playback seemed OK on Kubuntu and Xubuntu 10.10, as was OK on 10.04. Is this a known issue? And if so, is there a patch?
View 4 Replies
View Related
Mar 30, 2010
I've been using ubuntu for quite some time, but just lately I burned a disc with brasero and my car doesn't read it, idk which is a good soft to create mp3 discs?? is there any that auto converts songs to mp3 if they are aac?
View 1 Replies
View Related
Apr 30, 2010
I recently installed 10.4 on my laptop and I love it, so I wanted to install it on my desktop. It's a somewhat older computer, AMD3000+ nForce 2, 1.5 gigs of Ram and a Radeon x1650. Whenever I try to start the Live CD I get the error soft lockup - CPU#0 stuck for 61s and it doesn't continue.
View 9 Replies
View Related
Jun 16, 2010
Do you know any software that is usable by ubuntu to create HDR photographies?
View 8 Replies
View Related
Jul 30, 2011
I cannot boot into Ubuntu at all. I have two kernels installed, 2.6.35-28 and 2.6.35-30. The first thing that happened today was that I wasn't able to boot into the latter. I was shown the (in)famous "BUG: soft lockup - CPU#0 stuck for 61s". At this point I could still boot into the 2.6.35-28 kernel. But after shutting down and starting again an hour later, I got the same message when trying to boot into 2.6.35-28. I have tried leaving out the boot options "splash" and "quiet" on both kernels and also adding in "noapic". No combination helps. Needless to say, booting into recovery mode doesn't work either. Up until today, I have been able to boot into both kernels with no problems.
View 1 Replies
View Related
Sep 17, 2010
I am trying to make a NAS solution for our club, which should contain different data for download. I have been looking at freeNAS, openfiler and other solutions but they don't offer quite what i want.I want data security, but trying to avoid software and hardware raid.Windows Home Server has a function, where it copies the data from the 'main' storage disk and over to the 'backup' data storage drive automatically.
View 1 Replies
View Related