Fedora Hardware :: HP PSC 1200 Series Over Network - Printer State Idle
Dec 4, 2009
F12 64 bit machine, connects to a Windows share to which a HP PSC 1210 is connected through a USB connection. Printer is set to share, nicknamed "Asterix". When the printer is set up through F12, I select under Network printer "Windows printer via Samba". I browse, find the printer, and click verify. The printer is accessible. Then I finish the installation, ordering a test print. Here the strange things start happening (attached some screenshots to back the story up).
1) No error messages appear that I can find. No cups-errors, no other errors pop up on the F12 machine. The print appears and disappears from the "Document Print Status (Asterix)" window. Only on the Printer Properties page do I see something strange: Printer state: Idle - procession page 2.
2) In the Windows machine, I also can't find any error messages. The print appears in the Printer list, and stays there. The printer comes to life, checks its cartridges, rolls some wheels, and then decides to do nothing more. When I select the print and click on Properties, the default priority is 1, but when I move it up to 99, nothing changes. The only strange thing here is, that the document, according to the Windoze machine, has 0 pages, yet is some 20MB.
And nothing ever happens.
Things I think it's not:
Firewall issue. The print obviously slips through to the other end.
Faulty driver issue. Directly from the Windoze machine, and if plugged into the USB of the F12 machine, does it print perfectly fine.
As i understand, after autofs unmounts disk (network or otherwise) it keeps spinning. It costs energy, so i wonder is there any way to put hard disk to idle state after autofs timeout kicks in?
im am using a dell inspiron 1721 with an ati raedon 1200 series video card i need to know how to update it so that i can get compiz to work properly. (it worked for ubuntu).
After 10 minutes in idle state (watching a video in vlc or in flash counts as idle time too) the screen blanks. As I mentioned in the title, the backlight level is lower when screen turns back on. This is a new feature of the problem, and might be related to a recent upgrade of xorg. Where is the configuration file that handles the screensaver? And why is it even enabled by default?
I am using Fedora 12 with HP 1020 Laser Jet. Plugged printer in and installed it. Now it doesn't want to print, it gives me a printer state message: /usr/lib/cups/filter/hpcups failed.
I have tried to reinstall hplip but it is the same.
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
I have a problem with the latest Fedora. Installed it cleanly on a machine with Gigabyte H55M-S2 with Intel Core i3. There seems to be no sound and I checked to see if anything is muted but is not. The manual says that the sound chip is ALC888B so this could be the first problem. Any ide how I can make it work? Here is a dump of some things on my system.
Code: [weaz ~]$ lspci | grep Audio 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) [weaz ~]$ uname -a Linux EarthwormJim 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
This is my first day with Debian, I have used other distros, and am a long time linux user. My HP D 1600 series is recognized, but when I try to print a test msg. it says sent, but the printer remains idle. I have tried everything I know. When I run the trouble shooter I get this. /// /usr/lib/cups/backend/hp failed////
In the past when having a printer problem I have installed HPLIP-gui and removed the printer then re-installed it. That has not worked and I cannot even remove the printer.
I have an HP J4680 all in one that, for some reason, does not process the print job immediately when I send it. When I open my printer's properties it will list the printer's state as idle and when I go into the print que it tells me the job is scheduled for . . . (some time) which is, I think, about 5 min later by the clock on the task bar. I've been all over the settings and don't see anything that looks like it applies to that. Usually I've been restarting the printer and computer and then it will print when I send the job. Tonight I waited until the time and it did print according to the scheduled time. I need to find a way to always have it print right when I send the job.
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
TAG: Fedora 15 no printersTAG: Fedora 15 Can't find printerTAG: Fedora 15 Can't add printerTAG: Fedora 15 Can't add network printerAfter installing Fedora 15 I discovered that I could not add my network printer to the printers dialog. After some searching in the fedoraforum "Archives" I found a solution that resolved my issue.I am providing this solution in case anyone else has this issue.Close theprinter dialogOpen up terminal Type sudo iptables -FRe-open the dialog and your network printer should be displayed!If you are not setup as a sudoer then either add your self to the /etc/sudoers or use the following:Type su -Enter root passwordType iptables -F
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
I am a newbie when it comes to linux, but know a little (the little bit of dangerous stuff).I have set up a home web server for when I am testing website using PHP, mysql and other funky stuff. This is a reflection of my production server as far as I can with my limited knowledge.I am also using this box to learn more about the Linux operating system and I doing this slowly. Before I installed the GUI (Gnome) I was using a text based server, this was working fine and running absolutey fine and never disconnecting. This has been fine and working 24/7 for around a month.
At the weekend (just gone) I ran the following at terminal # apt-get install gnome
This gave me a GUI so I could try some other things.
When the computer is idle the network card seems to drop the connection, Im trying to see after how long it does this. I have seen this work fine after an hour, but after a night, the network has been dropped. This is a hard wired connection to the router.first time I thought the PC had froze so rebooted the PC, but the second time, I plugged a mouse into it and noticed the the network icon had changed, after right clicking on it, i noticed that It had dropped the connection. After clicking the "reconnect" option it is back up and running.
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
I'm having a problem where the wired network wired network (eth0) disconnects when the connection is idle for a while (usually tens of minutes). It works fine every time I boot up, but eventually it dies, and I can't ping the machine, or ping anything from the machine. ifconfig shows that it still has an IP address. Running ifdown/ifup causes it to work again. I intend for this machine to be a server, so I can't afford to go restart it when I need network access. sudo lshw -class network gives me this:
i used to download files using transmission bit torrent client. I download the torrent and once the download starts i will leave the system and check only after 4 or 5 hours later.But when i check the system again, the network connections were automatically disconnected.The download is getting stopped naturally. why my wired network connection is getting disconnected automatically if the system is idle?(ubuntu 10.10)
I've never installed a network printer before and have no clue. I'm running Fedora 12, the printer is an ancient HP 2100TN. I'm linked directly to wall jacks in my building, have no clue about the router and have no access to it. I have no idea how to get Fedora to find this printer.
I've got F14 up and running on a remote WiFi machine. I need Samba to set up a network printer. Is there a Samba GUI someone can point me to to get started on this?.
I've recently upgraded to 10.10 and am having the same problems as with all the previous versions. I have no eth0 connection at this moment, only lo. I have an Hp pavilion about three years old with a onboard ethernet, connected to router and wired broadband. The thing is, when I am in Windows, the internet will also drop, going into "local only." I can always get that back though by running the network diagnose. Another thing. How to I get into the network.state file to make changes?
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
I'm going to setup a File and Printer Sharing in my little home network... 3 Computers actively connected to the Web through a single ADSL2+ Wireless Router (number of Computers will increase later) At the moment 2 of the computers are running Fedora 10 and 1 running Windows XP...
Now i want to setup the 3 machines to use 1 printer which is connected to one of the Fedora 10 machines, and i want File Sharing to be enabled so each machine can easily view each others shared files and also be able to print when ever needed (ofcourse the machine with the printer will have to be on for the printing process to happen) I've installed Samaba on each Fedora Machine, enabled sharing but i dont seem to be able to view the Windows machine or each other....
