Fedora Hardware :: IPP Network Printer Error
Jan 17, 2011
I am installing a nerwork printer (IPP) in my Fedora 14, but I met the 'Tree connect failed (NT_STATUS_ACCESS_DENIED)' problem.
Here is my configuration:
1. System->Administration->Printing add
2. I click the 'Internet Printing Protocol' bar, and input the HOST, and find my network printer. Then I input the User and Password, it is verified.
3. I installed the driver, seems OK, but when I print the test page, the printer server says Tree connect failed (NT_STATUS_ACCESS_DENIED)
View 1 Replies
ADVERTISEMENT
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Feb 1, 2010
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies
View Related
Jan 17, 2010
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
View 9 Replies
View Related
May 30, 2011
TAG: Fedora 15 no printersTAG: Fedora 15 Can't find printerTAG: Fedora 15 Can't add printerTAG: Fedora 15 Can't add network printerAfter installing Fedora 15 I discovered that I could not add my network printer to the printers dialog. After some searching in the fedoraforum "Archives" I found a solution that resolved my issue.I am providing this solution in case anyone else has this issue.Close theprinter dialogOpen up terminal
Type sudo iptables -FRe-open the dialog and your network printer should be displayed!If you are not setup as a sudoer then either add your self to the /etc/sudoers or use the following:Type su -Enter root passwordType iptables -F
View 7 Replies
View Related
Oct 19, 2010
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
View 3 Replies
View Related
Nov 11, 2010
I have just installed Fedora 14 0n both my laptop and desktop. Everything looks really good so far except I cannot add my wireless printer.
When I try to add a new network printer I get "The password may be incorrect."
View 4 Replies
View Related
Aug 31, 2010
I've never installed a network printer before and have no clue. I'm running Fedora 12, the printer is an ancient HP 2100TN. I'm linked directly to wall jacks in my building, have no clue about the router and have no access to it. I have no idea how to get Fedora to find this printer.
View 14 Replies
View Related
Jan 30, 2011
I've got F14 up and running on a remote WiFi machine. I need Samba to set up a network printer. Is there a Samba GUI someone can point me to to get started on this?.
View 9 Replies
View Related
Apr 30, 2009
I have a HP Officejet 6310 as a network printer
How do I find the network address of the printer so I can install it?
View 6 Replies
View Related
Jun 17, 2011
My network printer does not work anymore. What can I do now I have an Lexmark Z617 printer.
View 5 Replies
View Related
Apr 28, 2010
I've recently decided to migrate the infrastructure in my workplace from ubuntu to fedora, every thing except the printers went perfectly. When I try to print as an user It just throws an generic error and stops, as a root it doesn't even show the error.
This is the debug log:
Code:
D [28/Apr/2010:04:22:03 +0200] cupsdSetBusyState: Dirty files
D [28/Apr/2010:04:22:03 +0200] cupsdReadClient: 12 POST / HTTP/1.1
D [28/Apr/2010:04:22:03 +0200] cupsdSetBusyState: Active clients and dirty files
D [28/Apr/2010:04:22:03 +0200] cupsdAuthorize: No authentication data provided.
D [28/Apr/2010:04:22:03 +0200] cupsdReadClient: 12 1.1 Get-Jobs 1
D [28/Apr/2010:04:22:03 +0200] Get-Jobs ipp://localhost/printers/ .....
It worked fine in debian and ubuntu, so we can assume that the drivers are ok, any ideas?
View 5 Replies
View Related
May 16, 2009
I'm going to setup a File and Printer Sharing in my little home network... 3 Computers actively connected to the Web through a single ADSL2+ Wireless Router (number of Computers will increase later) At the moment 2 of the computers are running Fedora 10 and 1 running Windows XP...
Now i want to setup the 3 machines to use 1 printer which is connected to one of the Fedora 10 machines, and i want File Sharing to be enabled so each machine can easily view each others shared files and also be able to print when ever needed (ofcourse the machine with the printer will have to be on for the printing process to happen) I've installed Samaba on each Fedora Machine, enabled sharing but i dont seem to be able to view the Windows machine or each other....
View 6 Replies
View Related
Dec 4, 2009
F12 64 bit machine, connects to a Windows share to which a HP PSC 1210 is connected through a USB connection. Printer is set to share, nicknamed "Asterix". When the printer is set up through F12, I select under Network printer "Windows printer via Samba". I browse, find the printer, and click verify. The printer is accessible. Then I finish the installation, ordering a test print. Here the strange things start happening (attached some screenshots to back the story up).
1) No error messages appear that I can find. No cups-errors, no other errors pop up on the F12 machine. The print appears and disappears from the "Document Print Status (Asterix)" window. Only on the Printer Properties page do I see something strange: Printer state: Idle - procession page 2.
2) In the Windows machine, I also can't find any error messages. The print appears in the Printer list, and stays there. The printer comes to life, checks its cartridges, rolls some wheels, and then decides to do nothing more. When I select the print and click on Properties, the default priority is 1, but when I move it up to 99, nothing changes. The only strange thing here is, that the document, according to the Windoze machine, has 0 pages, yet is some 20MB.
And nothing ever happens.
Things I think it's not:
Firewall issue. The print obviously slips through to the other end.
Faulty driver issue. Directly from the Windoze machine, and if plugged into the USB of the F12 machine, does it print perfectly fine.
View 3 Replies
View Related
Jun 17, 2009
I'm trying to install and configure a printer (networked Brother HL4040CN), but I'm getting an error dialog when I click on "New" in the printer configuration GUI.
Action 1) Click on "New"
Response 1) a) "Authentication (fetching device list)" dialog box, request password for root.
Response 1) b) "Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost" appended to /var/log/cups/error_log
A2) Type root password and press enter in "Authentication" dialog box
R2) a) "CUPS server error" box, "There was an error during the CUPS operation: 'server-error-internal-error'.
R2) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:14:12 -0400] Unable to execute /usr/lib/cups/daemon/cups-deviced: insecure file permissions (0100777)
E [17/Jun/2009:08:14:12 -0400] Returning IPP server-error-internal-error for CUPS-Get-Devices (no URI) from localhost
A3) Click "OK" button in "CUPS server error" box
R3) a) "New Printer" dialog box opens
R3) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:17:10 -0400] Unable to execute /usr/lib/cups/daemon/cups-driverd: insecure file permissions (0100777)
E [17/Jun/2009:08:17:10 -0400] Returning IPP server-error-internal-error for CUPS-Get-PPDs (no URI) from localhost
A4) Enter "lpr://192.168.1.2" and click "Find" button under "Seelct Device->Network Printer->Find Network Printer"
R5) "No printer found at that address."
Any ideas? I have installed the RPMs from Brother's web site for both LPR and CUPS-wrapper
View 4 Replies
View Related
Oct 19, 2009
When I installed Fedora GNOME I could use my printer fine (But I had to change the recommended driver) Now, I switched to KDE and I plug-in my printer, It automaticly adds it, Now I have to delete it and re-add to fix the small bug... Except when I press "Remove Printer" I get "There was an error during the CUPS operation: 'client-error-forbidden'."
View 1 Replies
View Related
Jul 20, 2009
I have a FC11 box, with an HP prineter attached. I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5. I am not sure what is missing. when I tried to print from the XP box I got "Test pge failed to print" error.
View 9 Replies
View Related
Feb 6, 2011
I have Ubuntu version 10.10 and I'm trying to install the HP DeskJet 1000 J110a printer. I have HPLIP version 3.11 (the latest version I believe). The printer shows up but when I try to print the error message reads: Printer requires the 'foomatic-rip-hplip' program but is not currently installed.
View 2 Replies
View Related
Jun 23, 2011
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies
View Related
Dec 31, 2009
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies
View Related
Jan 7, 2010
is it possible to install a netwerk printer, while not connected to the netwerk where the printer is?I installed opensuse on my sisters desktop and I want to install the printer that she and my parents are using at home. Is this possible?De printer is in a windows workgroup and shared. De name of the workgroup is DEROON and the name f the computer the printer is connected to is Nico
View 4 Replies
View Related
May 10, 2010
Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies
View Related
Feb 22, 2011
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
View 1 Replies
View Related
Dec 16, 2010
I successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :
[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden
XXX is my server IP
View 1 Replies
View Related
Dec 26, 2009
I have a problem with a bad entry in my system-config-printer on my notebook computer which I think is interfering with my ability to print. I run fedora 10 on several systems in my house. On one desktop, I have a printer hosted which I think I have successfully setup for wireless network sharing (an HP895) using IPP.My problem seems to be a bad entry in my system-config-printer on my notebook computer which seems to stall when I try to print from applications (Firefox for example.) on the notebook. If I open up "Printing", I have 3 printers listed... one of them is for when the printer is attached directly to the notebook, one of them is the working printer description "printer" and the 3d is the bad entry. If I click on the bad entry to try to delete it, I don't have that option, but If I try to look at the "properties" for that entry, system-config-printer stalls (as do other applications when the printing dialog box starts up, and I have to force them to shut down.)
I will attach some screenshots and a copy of my /etc/cups/printers.conf file.How do I get rid of this "bad entry" in the system-config-printers GUI ? It doesn't seem to exist in the printers.conf file.
View 3 Replies
View Related
Apr 15, 2010
This is my first attempt with Yum and Fedora for that matter. I need to load a print driver and network driver for an MX860 printer. I downloaded the drivers and they are in the download folder. When I try to install I get what is below. How do I resolve? Do I need to identify where the driver is? If so, how?
[compaq@compaq ~]$ su -c'yum install cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz'
Password:
Loaded plugins: refresh-packagekit
updates/metalink | 15 kB 00:00
Setting up Install Process
No package cnijfilter-mx860series-3.10-1-i386-rpm.tar.gz available.
Nothing to do
[compaq@compaq ~]$
View 14 Replies
View Related
Jun 1, 2011
I have two Suse un-firewalled computers connected via NFS. About a year ago I found instructions for a very SIMPLE way to share a CUPS connected printer using Yast. When I installed 11.4 I lost the instructions. It required no config file editing and took about two minutes. Google searches focus on complicated SMB-Linux connections like those suggested by swerdna.
View 6 Replies
View Related
Aug 18, 2010
The printer configuration dialogue under Fedora 13 KDE will give the error message "The password may be incorrect" when I click on the new network printer button, however there was never anywhere that I entered a password. The configuration will continue after this but it will throw an error that it doesn't have permission to do what it needs later on. I have been searching for a bug but have not been able to find one. This is reproduceable on both Fedora 13 machines I am running.
View 1 Replies
View Related
Jan 18, 2010
I'm having a problem trying to set up my HP OfficeJet 6310 printer with Fedora 12. This is with a clean install, SELinux disabled and Seems to be some issue specific to Fedora, as I've used the same setup with the same hardware without problems in other distributions. I have installed all the HP files I believe should be installed. Anyway, my printer is on my wireless network. I can see the printer on the network, as is the case with my other computers.
I followed the standard setup I use with any other distro....open a terminal and enter "hp-setup." The HP Setup utility opens and I go through the standard procedure of choosing /Network/Ethernet" as my means of connecting. Moving on, the HP OfficeJet 6310 is found without a problem. When I attempt to "Add Printer," however, I am then getting an error. The error shows, "Printer Queue Setup Failed. Restart CUPS and try again." Looking at [URL], I get to CUPS but can get nothing there so far as a printer goes.
View 14 Replies
View Related
Jul 26, 2011
I have been trying to add the Canon Pixmar MG5150 printer to my Fedora 13 setup. I downloaded the drivers and installed them but I keep getting an error saying the pstocanonij failed.
View 5 Replies
View Related
