Ubuntu :: Frequent Freezes With Nouveau, No Longer Booting With Nvidia?
Oct 13, 2010
I made a fresh installation of Ubuntu 10.10 (64 bit) on a Sony PCG-81112M, the graphic cards is identified by lspci as "nVidia Corporation GT216 [GeForce FT 330M]". Quite frequently everything but the mouse pointer freezed on the screen, I found no way to recover from these situations but to restart the computer using the power button.
I decided to install the proprietary driver (as this is the recommended driver, I was confident this would solve the problem). As a consequence the system now hangs on boot after showing the Ubuntu 10.10 inial logo/text. I could start in recovery mode, but I'm not sure to which driver I should try to change to. I really need no fancy 3d stuff, just a robust computer to which I can attach and detach an external screen.
View 9 Replies
ADVERTISEMENT
Nov 30, 2010
Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:
Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.
View 3 Replies
View Related
Jan 10, 2011
I m running redhat 5.5 server on dell poweredge R910 on which we have Kvm running with 3 virtual machines. Now the server gets freeze's up frequently making us to force restart the server again. We have gone through the logs and browsed on several forums with the related errors but couldn't find any solution and also have checked on redhat site but was of no help.
View 2 Replies
View Related
Jun 10, 2010
I've experienced the great functionality that nouveau gives me, but am a bit disappointed that it cannot support 3D acceleration. I play a few games so this is a requirement.I don't want to switch completely back to the NVIDIA driver because it breaks my brightness control keys on my laptop, and it isn't as fast and responsive as nouveau.Is there a way to have nouveau run by default, but when I launch a game in a separate X server it would load the NVIDIA driver?
View 2 Replies
View Related
Jun 2, 2011
Now that nVidia is up and running, I'm curious to do a comparison with Nouveau. I there an EASY way to do this? Like a simple on/off switch? Major system/kernel changes are not an acceptable option. If it can't be easily done, I'll just stick with nVidia.
View 4 Replies
View Related
Apr 29, 2010
this may be asking too much (especially from leigh123, 'cause i know you're working hard), but i've lost track of the current status of the great nvidia driver vs. nouveau driver debate, and what we can hope to see in f13 in about 20 days. could you provide or point us to a layman's summary of what graphics capabilities we can expect with a "default" configuration when we bring up f13?
in particular, can we expect nouveau to provide 3-d for f13 (or in the near future)? nvidia install guides, leigh123, but despite your best efforts, the procedures seem to be getting more involved as time goes on, not less (and not noticably more reliable, either). between graphics card drivers and flash plugins fighting firefox (not to mention adobe fighting videos and hulu) it's discouraging to actually lose capabilities that were once available when upgrades are made.
View 1 Replies
View Related
Aug 4, 2010
After installing 11.3, I realised that my graphic driver is not working as desired. I have a Compaq CQ60-430SA laptop with an NVIDIA 8200M graphics card. Earlier with 11.2, I had some proprietary NVidia drivers and my graphics were smooth. However, I am not getting the same performance with Nouveau...
As can be seen from the screen clipping below, the images especially in the preview mode and the icons look jarred (highlighted in red). I have no complains with the video but the images and icons do look shabby at times and therefore I want to switch over to the proprietary NVidia drivers.
[URL]
View 4 Replies
View Related
Mar 6, 2010
Anyone knows the easiest way to switch from the nvidia drivers to teh nouveau drivers in the latest kernel?
View 2 Replies
View Related
Dec 17, 2010
I'm using ubuntu 10.10 with the proprietary Nvidia-driver for my graphics card. I'd like to switch to the open source Nouveau driver. What is the best way to go about this?
View 9 Replies
View Related
Jun 20, 2011
I was having slowdown freezes with the NVIDIA proprietary drivers for Ubuntu 11.04 (additional drivers), so I decided to try the latest binary from nvidia that I had to install manually. I purged the system of the nvidia drivers and then installed the manual nvidia driver (sudo apt-get --purge remove nvidia-*). But I got the same slowdown freeze (just took a lot longer to happen now) and when I uninstalled the manual nvidia driver, X would fail to initialize (no nvidia modules). Is there a package or configuration utility I could use to install the nouveau driver after removing the manual nvidia drivers or am I screwed? Cause the Nouveau driver works fine, I just wanted to see if I could switch to Linux since all the games I play work fine through Wine.
View 1 Replies
View Related
Nov 26, 2010
First some specs:
Fedora 13 (Goddard) 32-bit
NVIDIA GeForce GTX 260
The DVI output on my card works just fine to my monitor, which is what I've been using. I installed no drivers; it just worked. However, now I need a duplicate screen to be given via the s-video output, but it doesn't work. Nothing is being given to the tv and nothing is being detected under monitors. From what I understand, this is because I need to install the appropriate Driver.
I downloaded my driver from the nvidia website, but it won't install. it tells me I need to disable nouveau.
View 9 Replies
View Related
Apr 2, 2010
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies
View Related
Jun 18, 2010
I am using an Nvidia GeForce FX5200 card and nvidia hasn't released a driver that seems to work with it in Fedora 13 yet.. However, I decided to do an install of F13 and use the nouveau drivers until Nvidia updates their drivers, however, the nouveau drivers don't work worth a crap with my card I did a fresh install and then ran a yum update. What I am seeing is after a few minutes, all the icons disappear, no fonts, and nouveau starts throwing errors to my message log. Here are the messages I get:
[Code]...
View 2 Replies
View Related
Jun 17, 2011
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
View 2 Replies
View Related
Aug 8, 2010
I've just installed Squeeze and try to install Nvidia drivers, but installer wrote that I have to disable Nouveau first. So could you please tell me how to turn off nouveau driver totally and correctly.
View 6 Replies
View Related
Jul 3, 2010
I have Fedora 11 installed on a system that initially had an ATI 1650 type card. I recently replaced it with a GeForce GT 220. I don't believe there was ever an xorg.conf generated or used with the ATI card. Initially, when I replaced cards and rebooted, I was able to start up KDE or GNOME but with only 2 very low resolutions available(the highest being 800x600). Next I ran Xorg -configure to generate an xorg.conf file. Everything I am seeing in this file seems to make sense. But now, when I startx all I get is a red error box being displayed by the CRT monitor with this message:
Signal Frequency is out of range
FH 30.1 kHz FV 24 Hz
Please Change Signal Timing
The only way I can get my X system back is to go into the xorg.conf file (in the Device Section) and change the driver to vesa. But I still only have 2 very low resolutions available.
View 6 Replies
View Related
Oct 17, 2010
I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?
View 2 Replies
View Related
Jan 25, 2011
ill try to write in english as well as i can.So, my problem is this:Fedora has Nouveau drivers installed by default, and I want to install nVidia propietary drivers.When i try to install Nvidia propietary in runlevel 3, it says that ive to deactivate or unistall Nouveau.
Ok, i do that, but the next reboot, the tty doesnt work (black screen) and i cant access runlevel 3 correctly and i cant install propietary driver. I have looked this in google and i didnt find nothing, so i ask here.
View 5 Replies
View Related
Jun 7, 2011
Can this be done similar to some other O/Ses so Nouveau doesn't pre-screw up the kernel for 3rd party drivers??? Would be great in F16 if we were given a choice re: wanting nouveau or not. I simply can not get F14 or F15 to work with the 270.xx drivers on recent equipment.
View 10 Replies
View Related
Apr 26, 2011
Nouveau won't go away.I done the rdblacklist in grub and blacklist in modprobe.d but it still persists.Is there something else I need to for Fedora 15?
View 7 Replies
View Related
Jan 8, 2011
I recently changed my Graphic card drivers from Nouveau to nVIDIA in Suse 11.3 KDE.
One thing I have noticed that initially I had been using various Adobe Fonts in many applications prior to change of drivers. But after this change the looks of the same fonts became quite different, the length & breadth of "individual letters" changed quite a lot making them look not so beautiful as they were earlier. Am I missing something or is it a normal phenomenon. But I am satisfied with the present looks.
View 3 Replies
View Related
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Nov 30, 2009
As I mentioned before, I has having freezes while installing F12 (x86_64) with a GeForce 8600 GT. I was able to complete the installation by doing it with the "basic" video driver. However, I was still getting frequent freezes. I installed the testing Nvidia drivers, and the freezes went away. When it froze, it was a hard freeze -- it wouldn't respond to CTRL-ALT-DEL or SysRq (I did enable SysRq first). I had to do a hard reset.
View 7 Replies
View Related
Jan 4, 2010
I updated yesterday. I'm not sure if problems started before or after.
The problem yesterday [URL]
Went to bed last night and left the computer running, something weird occured this morning (media file wouldn't play) so I just decided to restart.
now I am getting this,
Mount of root filesystem failed. A maintenance shell will now be started. CONTROL-D will terminate this shell and reboot the system.
ctrl-d just brings me back to the above error message.
in the GNU GRUB version window I no longer have
Ubuntu, Linux 2.6.31-15-generic
Ubuntu, Linux 2.6.31-15-generic (recovery mode)
listed
using the other two listed 16 and 14 does nothing
View 7 Replies
View Related
Oct 18, 2010
did some updates on the buntu-box but everytime I start it it now goes to some CMD-like screen that lets you go through F1-FX and comes up with diffrent tty thingies, before the update it used to go into the proper GUI, I have 10.10 installed, I think I updated my GPU driver and looked on here for some hints on what to do, I have tried: cd /etc/x11
Above command did not work for some reason, think it couldn#t find it? Sudo service gdm start Said above process is already started or something
View 5 Replies
View Related
Mar 17, 2010
i have a peguin computing 130 server running ubuntu server 9.10 and today i open the box to removed one of the hard drives that wasn't being used and the server is no longer booting to the bios.
i have removed the ram and placed it back but notting is showing up. Every time i turn it on it doesn't show anything not even the bios.
View 4 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
Mar 22, 2010
so after my upgrade to 10.04 I'm experiencing a puzzling problem with Grub2. It can load everything fine except for XP. I have XP on a separate partition, it is detecting fine and the grub.cfg file is created withou a problem when I the appropriate commands to update and upgrade grub. What happens is that I select Windows XP from the list and it goes to a black screen where a cursor in the top left corner blinks 3-5 times and then immediately kicks me back to the Grub menu. I can do this forever but the grub menu just gets reloaded every time. Any ideas?
Here is the windows portion of my Grub.cfg:
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda2)" {
insmod ntfs
[code]...
Here is my boot.ini on the ntfs partion I am trying to boot into
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)WINDOW S
[code]...
View 7 Replies
View Related
Aug 7, 2010
I was dual booting on my netbook with Lucid and Windows XP, so the computer starts with the GRUB2 menu. I deleted the windows partition and now I only use Lucid on the netbook. I want to know how can I get the computer to simply boot into Ubuntu like a normal computer would do if it was not set up as a dual boot system?
How can I get the computer to go directly into the ONLY operating system rather than taking a detour through the GRUB menu?
View 9 Replies
View Related
Aug 20, 2009
I screwed something up and my macbook no longer boots up - hanging before gdm with msg: NETADDRCONF eth0 not found NETADDRCONF wlan0 not found(not connected to network)problem happened after I tried to fix the flaky mouse with following:
* I created a conf file and added a inputdevice section with touchpad options
* I also created an appletouch.fdi file with op0tions
* I also created an applesmc module
if I can figure out how to boot into failsafe then I could back out changes but at this point I cannot even get there
View 2 Replies
View Related
