Fedora :: Detecting USB Devices On Virtual Machine
May 21, 2010
I am running federa 12 and just recently installed virtual Machine Manager. I've created Virtual machine and installed Windows XP on it. Everything is running OK, as far as I can see. I've installed software to manage and download pictures from Cannon camera, but I am not able to make USB port available to this Virtual machine. I tried to add hardware in VM, but not sure if I should go for STORAGE option, or PHYSICAL HOST DEVICE. I tried second option, and selected USB device. Now I've got UB hub available, but still cannot see anything attached to it (camera in my case, or USB stick with pictures).
I just noticed that USB devices aren't being detected by kde when i plug them in. they work fine in gnome and the kernel detects them properly (seen via dmesg) but they're not being seen in kde.
I've been running F10 with a four disk RAID5 setup that has been working fine, however when I tried to do a fresh install of F11 I can't get past the "Select Country" and "Select Keyboard" screen of the GUI as a message will say "Detecting Storage Devices" and then throw up an error. I can't give you the full error, because when I click Save The Detecting Storage Devices box appears and I can not select anything under it or enter my Bugzilla account.However, when I plug just the hard drive that has XP on it then the installer continues swimmingly.I've backed up everything, so if I have to I could zero out the drives however they're all rather large so it'd take an inordinate amount of time.
Getting very frustrated trying to install F12 to my work PC. Its a dell precision 670 with a 3ware 9550sxu raid controller running raid 5. Its consistently crashing at the point when it says 'finding storage devices' with a message about : Mismatched Sizes. What I could try? I had no problem on this machine with fedora 11, so whats changed? Just for info by the way, theres two raid volumes on this system a 750Gb that contains my windows vista installation in a 500 Gb partition (NTFS) and the free space I'm using for fedora. The second volume is a 2TB data volume with a single data partition (NTFS).
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
Installing stretch stops at detecting network devices. This is an attempt to install stretch over the top of Windows 10 on a Toshiba Radius 15 with 2 each USB2 ports and 2 each USB3 ports, and no RJ-45. Its wireless is based upon the Intel 7265. Just before the presentation of the wireless list, the system reports the need to install non-free:
and asks for media. Whether I respond yes or no, the driver selection screen comes up. [I have not been able to find those four specific files on the Internet.The network card screen comes up, I select the Intel recommended firmware iwlsifi, but the page just recreates itself and waits for a new selection. If I select either 'none' or 'not listed', the installation fails saying there is no network card.I have obtained from Intel their suggestion as of Aug 2015: iwlwifi-7265-ucode-25.30.14.0.tgz.I placed this on a USB stick in a subdirectory labeled 'firmware'. This was built from Windows 7 on a FAT32 file system.
There is also a Dynadock docking station that connects to the Toshiba via a USB3 cable. Besides video, USB,and audio, this has an Ethernet port. I have tried this connected to the laptop but it also requires a driver. I have placed that driver on the firmware directory of the USB also.
Are the four files listed above somehow inside the iwlwifi driver tgz?Is there a way to get the docking station drive to load so I can use its Ethernet port?
I have used Rufus to build the stretch USB from Windows. I do have a a Linux box I built with the same USB. I would use it but so far, I only have a command line on it and I have not figured out how to access debian.org to download the installation files nor how to put that on the stick.
how do I set up a virtual machine in Fedora 14? Do I do it through Quemu? I did not see Virtualboxose within the repositories. If some one would be so kind as to instruct me (please simple step by step instructions for setting up a virtual machine or for downloading and installing Virtualboxose or any other version of Virtualbox I would forever be indebted to you. I would like to install Fedora on my laptop instead of Ultimate Edition 2.8 of which I am getting tired of any Ubuntu based distribution.Oh by the way I tried the new Gnome 3.0 shell with Laughlin 15 and I was impressed. I can't wait til it is released. Also could someone point me in the right direction as to where I might ask, request, or just offer suggestions for software packages to be placed within the repositories.
I'm having some issues with a windows virtual machine. The system is Fedora 11 and the virtual machine is Windows 2008 Server. If I start the virtual machine from the virtual machine manager, it only has a single cpu despite my setting it to eight. If I start the machine from the command line, I can get four cpus but not eight. In both cases windows seem to display the eight cpus in the device manager (or whatever program it is). It has been suggest that windows was imaged on a four core machine before being loaded on the eight core machine and that something in windows is maxing at four cores. But that doesn't explain why the virtual machine manager can only start one cpu. I just played around on my home machine with a fedora 10 live cd and it recognized the two cores on that machine and used them from the virtual machine manager without problem. Also upped it to three cpus without problem.
I have a reader program which runs only in windows. Now I have a windows xp installation iso on one of the partitions. How can I set up a virtual machine environment of windows xp, so that I can run windows programs? I've tried wine but I cannot figured that out. I think a virtual machine is the choice. but do I also need install those drivers and microsoft stuff, like direct X 10?
I am experiencing a multicpre problem with fedora14 / kernel 2.6.35.6-45.fc14.x86_64 #1 SMP. (standard from the distro). The host has a total of 2 cores .yet a virtual machine started with 'smp 2' ( or xml : <vcpu>2</vcpu>) will not run on 2 pyhs cores . it will use just 1 core ('top' at the host shows 100%cpu while running an endless loop process on the VM) and libvirt 'virsh vcpuinfo <vm name>' shows only 1 physical cpu used (although 2 vcpus are used : 0, 1) The kernel seems to be an SMP one ( so says the uname -a . what does '#1 SMP' mean ?) . Am I missing something ? same XML on a DEBIAN machine will run the VM with 2 phys cores as should although the host there has 4 cores (>2)Should I recompile the kernel src with some addtional flag ?
I used qemu sucesfully on F9 but I can't find it on F10. I can't create a virtual machine. I tried installing qemu from rpms that I found on their site without any luck. How can I create a virtual machine on F10?
I tried to yum install libvirt but it says it is the latest.I have also checked that i have the latest qemu-kvm virt-manager virt-viewer python-virtinst.I understand that the error msg says that it is unable to find that certain file, libvirt-sock, and i dun think i have it either.
We have a virtual XP machine on our fedora 11 install. I want to drop fedora 11 down to init3 (since its a server anyway) and everyone is worried about the windows virtual machine dying. What would happen to my windows virtual machine if I drop the host server to init 3?
I have the virtual machine manager in fedora 11.On Dell Inspiron 1545 (dual core, 2GB RAM)I can not run any linux distribution virtualized Using Qemu as engine.The virtualized system boots but after not working.Try distributions of 32 and 64 bit.
I get errors when trying to manage my VM with Virtual Machine Manager.When adding the disk img, it complained that it didn't have search rights and tried to fix it but failed.It let me move on so I moved forward.I then built the VM and I couldn;t start it from within VMM.
I can create a virtual machine I named vm1 and the virtual-machine manager says it's running.
I don't know how to load windows XP.
The vm1 virtual machine console is frozen with the message "Booting from hard drive." But I know it can't boot from hard drive because I haven't loaded windows XP yet. When I created the vm1 virtual machine I put the windows XP CD in the optical drive and directed the menu to the CD. I heard it running, but still the console is trying to boot from the hard drive. I never got to the point where it asked me any windows XP software loading questions.
I have an F12 installation on which I have installed NoMachine's NX server. I can remote in nicely when needed (try to do as much as possible via SSH) while not having to boot into and stay on Gnome on the server and run VNC.I noted that when I try to start the Virtual Machine Manager from an NX session, I get an error that VMM is "unable to open a connection to the libvirt management daemon". libvirtd is running, however. And, when I startx on the server and try there, VMM works fine.Is this an inherent problem with the use of VMM, or something correctable?
I have 8 VMs on this virtual machine running different OS. Can VMs be moved/copied to another PC of similar hardware config running Fedora 12 (64bit) as host and KVM
If Yes, whether copying following files,
e.g. copying following files and paste them on the same /path/to/directory
i have fedora 11 installed on my laptop. i used to run another linux flavor through virtual machine manager but it is giving error. i have just tried it with different flavors. i tired it with BACKTRACK, UBUNTU AND MINT(live cd) each time it gives error. last time i tried with QEMU type connection as loca installation media(iso). with the MINT iso it gave the error.
I Installed fedora in Virtual PC after adding the line while booting as shown in the forums. But after installing to the hard disk, The Fedora virtual machine is not booting. The window closes without any notice automatically.
Every time I try to start a virtual machine in VirtualBox I get this error:
Code: Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. So I run '/etc/init.d/vboxdrv setup' in the terminal as root and I get this:
I'm hoping this is the right sub-forum, if not please move this post. My question is, how would I go about moving an LVM based virtual machine to a different host? Can I just use dd to copy the entire logical volume to a file, move the file to the other host, then again use dd to copy the file onto a newly created logical volume? I'm using KVM by the way.
I just install QEMU and virtual machine manager to use virtualization, but virt-manager cannot run properly. I can create a VM, then mount CDROM ISO, startup. With Windows installation, it runs well until format partition step, after that it is disconected and exit with error related to VNC. I dont know why have this problem cause the packages that I installed is from Fedora repo and I think they have been tested.
I want to run 64bit windows in a virtual machine on my fedora 14 64bit. using virtual machines and want to know what is recommended for fedora 14 and if 64bit vm's are supported yet.
I have installed Windows XP with Virtual Machine Manager. The question is how do I access files on my primary linux system? Also can I mount a NTFS partition in my Virtual Machine
I have F15 installed, and under KVM another Fedora 14. I want to cut/paste from F15 application to virtual machine, but could not find any way to do this.
I'm using fedora 13(x86_64).i installed windows xp in the virtual machine manager(which comes along with my distro).i installed it after creating the virtual hard disk,but after completing the installation of windows xp,the hard disk is not booting,it throws an error like the following picture.
