Fedora Hardware :: 13 - Install No Disks Found
May 28, 2010
I've been trying to install Fedora 13 and have been running into an issue where the installer cannot find the single hard drive on the system.
I've been running Fedora 11 successfully since it came out, however, I've tried installing Fedora 12, Fedora 13 (i386 and x86_64), Red Hat 6 Beta, and all cannot see the disk.
Fdisk -l shows no devices
modinfo mptsas on the working (Fedora 11) install shows the following:
On Fedora 13 it shows a version of 3.04.13, not sure if that matters. Also, looking at the console messages I noticed some errors like:
WARNING - Issuing Reset from mpt_config!
Also, there is only ONE HD installed, and even though there's a raid controller in the system, raid is not configured. I've also tried every combination of raid setup in the bios setup and none have made a difference.
View 1 Replies
ADVERTISEMENT
Jul 29, 2010
I have a laptop HP Pavilion, on which I installed Ubuntu 10.04. I erased the whole disk and used the option manually define the partitions.
Here is my partition table given by gparted:
Partition File system Mount point
unallocated 1 MB
/dev/sda1 vfat /windows
/dev/sda2 ext4 /
/dev/sda3 extended extended
/dev/sda5 linux-swap
/dev/sda4 ext4 /home
I installed Ubuntu and everything went fine. But now I want to install WinXP from an original Microsoft CD-rom and I get the follow error:
Unable to install windows, no hard disks found, contact your dealer (or something like that, it is translated from Dutch).
I tried everything, formatting my hard disk with gparted NTFS, formatting mkfs.vfat, with no luck.
View 4 Replies
View Related
Feb 25, 2011
I'm in the process of trying to install FC14 64 bit to my Window 7 64 bit system. This new system has a 6.0 Gb/s internal hard drive.When I reboot with the F14 install disk I have made it past the disk verification (is Verified) and then picking a language but then I get the message "No usable disks have been found". In Win 7, the Disk Management window shows that 184 GB of space are free. Is there some disk preparation that I should do to make this space available?
View 11 Replies
View Related
Jan 10, 2011
I am trying to install Fedora 14 from CD and the installer looks for usable disks and at the end says "No usable disks have been found".
View 6 Replies
View Related
Aug 5, 2009
the hard disc has two partitions, one is 156gb ntfs, currently with windows xp prof sp2, and I am trying to install linux to the second partition, also currently ntfs.I am not a total newbie (i used fedora 10 last semester and ubuntu the semester before that). I have tried installing ubuntu9.04, fedora 10, fedora 11, and opensuse11.1 to this computer, and every time the installation probes for hard disks it comes up with zip, unless I have my external disks connected. Otherwise "No hard disks were found for the installation. Please check your hardware!"with OK button.
I also tried with gparted to see if I could find the hard disk, and still had no luck. I googled my problem and found others with similar problem but no satisfactory solution.does anybody have any idea what could be wrong and how to fix it??
View 6 Replies
View Related
Nov 4, 2009
I have 600GB striping disks with 3 ntfs partitions, 2 ext4 partitions and 1 swap partion containing ubundu 9.10 and 120 GB free space. When I try to create new ext4 partitions with the fedora dvd I get the message: Could not allocate requested partitions. Not enough free space on disks, no matter how small the partitions I try to create. I created logical partitions.
View 3 Replies
View Related
Oct 25, 2010
Where might I find a list of all packages available for install on the Fedora 12 disks?
View 2 Replies
View Related
Jan 11, 2010
I just bought two 320GB SATA drives and would like to install F11 with software RAID 1 on them. I read an article which explains how to install RAID 1, but it used 3 disks: one for OS and two clones. Do I really need a third disk to install RAID 1 configuration? If 2 disks is enough, then should I select "Clone a drive to create a RAID device" during F11 installation as explained here?
View 6 Replies
View Related
Jan 19, 2010
I have installed Fedora 12 i686 Live to a 200 mb partition on an external drive. Before the install I created a 6.7 GB ext3 partition and a 45 GB ext3 partition. The live cd copied the image to a 200 mb partition.
partition 2bce0f9d-53a6-4ec2-b5ad-1a6915c74260 is 45 GB
partition 4683EB23BED2EB34 is 102.6 GB NTFS
partition b7240ff1-0807-42ba-e172-bff5872519ad is 6.7 GB
[code]....
Will creating an entry in fstab sdb6 and sdb8 allow the fedora distrib dvd to install to the external hd? How do I create the entries?
I have a raid0 hd with windows xp pro. When i try to shrink the partition using anaconda, I get a disk error and the comper locks up. I have to shut off the ups to reboot.
View 11 Replies
View Related
Mar 9, 2010
When I tried to run the fedora 12 disk setup (iso), instead of having the nice fedora logo I quickly get tetxt lines showing all my sata disks and USB card readers properly detected though... and the instal freezes. This PC is a mobo Gigabyte G41m-ES2h with 2x500 GB WD disk... Very basic config with a wolfdale 2.93 GHz + 4 GB DDR2 ram... I don't quite understand as Ubuntu 9.1 setup does the same thing whereas "superGRUB" launched from a CD detects my disks & partitions normally.
This fedora 12 disk is ok (fedora 12 installed on 2 other laptops in dual boot) and on the first satat disk there is a Vista. Really don't get it but isolinux has had sometimes issues with sata disks on some of my previous PCs.
View 1 Replies
View Related
Feb 25, 2010
I have servers which contain SATA disks and SAS disks. I was testing the speed of writing on these servers and I recognized that SAS 10.000 disks much more slowly than the SATA 7200. What do you think about this slowness? What are the reasons of this slowness?
I am giving the below rates (values) which I took from my test (from my comparisons between SAS 10.000 and SATA 7200);
dd if=/dev/zero of=bigfile.txt bs=1024 count=1000000 when this comment was run in SAS disk server, I took this output(10.000 rpm)
(a new server,2 CPU 8 core and 8 gb ram)
1000000+0 records in
1000000+0 records out
1024000000 bytes (1.0 GB) copied, 12.9662 s, 79.0 MB/s (I have not used this server yet) (hw raid1)
[Code].....
View 3 Replies
View Related
Mar 31, 2010
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
View 2 Replies
View Related
Oct 1, 2009
I have installed latest version fedora 11,when I install mplayer to have an error,I don't how to do,
[root@Robin Robin]# yum -y install mplayer
http://rpm.livna.org/fedora/11/x86_6...ta/repomd.xml: [Errno 14] HTTP Error 404: Not Found
http://livna.cat.pdx.edu/fedora/11/x...ta/repomd.xml: [Errno 14] HTTP Error 404: Not Found
[code]....
View 1 Replies
View Related
Oct 1, 2010
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
View 9 Replies
View Related
Feb 19, 2009
So far I've tried gOS, Linux Mint, Ubuntu, and SuZE. The result is the same: The live disk runs, opens up but the graphics are shoddy, sound doesn't work, everything is very slow, and in attempting to partition and install the os, it stays at "Resizing partitions 0%"I know Live disks are going to be a bit slower, but this is super slow and this computer is just a few months old. Usually the live cds have a database of drivers for common media but it just isn't accelerating the graphics or even recognizing my wireless. I know its not the CDs because they work fine on other (much older) computers.
View 2 Replies
View Related
Dec 7, 2009
I am trying to install F12 on my desktop. I previously had F9 installed. I zero-filled the harddrive before attempting installtion. When attempting to install F12 from the DVD I get various messages about needing drivers. The drivers listed seem to run the gamut from network cards to harddrives. I have an SATA drive installed as my primary disk. I have not been able to install any version since F9 so I thought I should finally try to nail down what is going on.
View 14 Replies
View Related
Feb 17, 2009
I have downloaded fedora 10, i386 and right to DVD/UD using 4x write speed. I have one machine have installed win xp, now i want to over right here, when i select installation , its asking common questions like language, drivers, when i select from Local CD/DVD i got 'No Driver Found' Error.
View 1 Replies
View Related
Apr 5, 2009
I installed Fedora 10 x86_64 from DVD this weekend. Once the install was completed and I booted into the new install, I ran the Software Update expecting to find and download security updates. However, to my surprise no updates were found! The install DVD was downloaded and burnt to DVD about two weeks ago. Did the installer fetch and install the F10 updates? Or did I mess up my install and/or configuration of F10? I remember when I installed F9 there were a lot of updates found right after the install.
View 14 Replies
View Related
Jun 23, 2009
I'm trying to install ndiswrapper in Fedora 10, but the package is not found:
[Code]...
View 1 Replies
View Related
Jul 11, 2010
I downloaded and burned the Fedora-13-x86_64-dvd iso to install on my shiny new box (MSI NF980-G65 MB, AMD Phenom II x4 945 CPU, 8GB Corsair DDR3 memory, generic ATAPI DVD drive, 2 500GB SATA drives, 2 1.5TB SATA drives). I boot from the DVD and and take the default install/upgrade option on the menu. I've tried with the default boot options and with about a dozen different options, all give the the same thing.
Looking console 3, shows the following:
ERROR loader: removing ddmode.conf failed
ERROR loader: got to setupCdrom without a CD device
It can't find the CD/DVD drive that it booted from. The install on console 1 is prompting for a driver to load. Do I need to download a driver for a generic ATAPI/IDE CD/DVD drive?
View 10 Replies
View Related
Sep 18, 2010
Q1: How to install tar.bz2 pakg?
Q2: After new install fedora 13 i get this [url] it is normal?
Q3: Firefox did not found any update [url]
How can i make it 3.6.10 ? it is now 3.6.3
View 8 Replies
View Related
Jun 25, 2009
After install I tried to add firefox but it wasn't found in any of the repositories. I thought it was supposed to be in there. Thunderbird also wasn't. What repositories do you guys add after install?
View 3 Replies
View Related
Mar 27, 2009
In trying to use the instructions here [URL] I get Quote: -bash: wget: command not found
View 2 Replies
View Related
Apr 3, 2009
Fc11 installed well, it was related to a particular sata driver perhaps The installation went well up to the reboot, and then displayed the message saying that LogVol00 was not found. 3ware sata raid card, usually it installs without error
View 2 Replies
View Related
Nov 21, 2010
I have 2 Debian OS's and wanted to put Fedora next to it.
Install went ok, but after rebooting it says: "No root device found. Boot has failed, sleeping forever."
During install from the live CD I didn't "v" the boot (efi or something?) because I thought Grub would take care of everything.
Should I just reinstall again and choose the Fedora bootloader? Won't it mess up Grub?
View 14 Replies
View Related
Sep 13, 2011
I am planning in near future(about a month or two) to build a new computer. There be a least two phisical disks - one for OS an another for data or backup. One disk to be a small(60-80 GB) SSD, another to be a HDD of 1 TB or bigger.
I have a few questions:
Is Linux(openSUSE in my case) work with SSD? It is possible to install Linux on two disks - in my case /swap, /boot and /root partition to be on SSD and /home partition on larger HDD?
View 4 Replies
View Related
Jan 22, 2011
Fedora 14 I recently went to install some software using the source files.When I ran the command
Code:
./configure
I got a message saying that
Code:
package gthread-2.0 not found
After searching the internet some one had the same problem. I needed to install a package called
Code:
glib2-devel
However, rather that searching the internet.
View 1 Replies
View Related
Dec 14, 2010
I fail to install OpenSuse 11.3 with Raid-1. What I do: Partitioning -> Expert. sda1 type RAID do not format / mount, sda2 /(root) type RAID do not format / mount, sda3 /home type RAID do not format/mount. Clone disk to sdb. Raid -> add md126p1 type swap mount to swap, add->md126p2 type etx4 mount to /(root), md126p3 type ext4 mount to /home. Bootloader: GRUB, boot from MBR enabled, boot from / disabled. After installation the system does not boot and grub reports error that the specified filesystem can not be found.
View 9 Replies
View Related
Apr 25, 2011
This is what I am trying to get for my dinosaur, Compaq Presario 5050. But I have never booted linux through floppy disks before, so I haven't a clue what I am doing.
In the read me from the site I linked above, it said they need to be 1.44 M and DOS formatted. Both are 144, and I went to my computer (in XP) and right clicked on the floppy, format, and create bootable DOS disk. But this fills the disk up with files, and even when I deleted them all, it said there was not enough room for one of the two files I am supposed to copy on to it.
So, how do I make the file fit onto the floppy, and how do I write the image file to one of the floppies? In DOS? I can use linux too, if necessary. (if it's easier)
This is another one I am looking at, but basic linux looks easier to install.
View 9 Replies
View Related
Aug 27, 2009
How many disks are required to get Centos 5 up and running.? It has been awhile since I've done an install but I use to use just the first three disks, with the rest being the manuals and such.
View 5 Replies
View Related
