Fedora Installation :: Editing Fstab / Disks.txt And Mounts.txt After Live CD Install?
Jan 19, 2010
I have installed Fedora 12 i686 Live to a 200 mb partition on an external drive. Before the install I created a 6.7 GB ext3 partition and a 45 GB ext3 partition. The live cd copied the image to a 200 mb partition.
partition 2bce0f9d-53a6-4ec2-b5ad-1a6915c74260 is 45 GB
partition 4683EB23BED2EB34 is 102.6 GB NTFS
partition b7240ff1-0807-42ba-e172-bff5872519ad is 6.7 GB
[code]....
Will creating an entry in fstab sdb6 and sdb8 allow the fedora distrib dvd to install to the external hd? How do I create the entries?
I have a raid0 hd with windows xp pro. When i try to shrink the partition using anaconda, I get a disk error and the comper locks up. I have to shut off the ups to reboot.
I have three hard disks in my PC , hda is used for /, /home, /boot and swap. Everything seems to setup fine here I then have partitions sdb1 and sdc1. On the edit partion options for these hard drives I can set the mount point. I have never seen this before with the other distros I have used and usually have to mess around with fstab after install to mount these disks, so was pleased to see this option.
Under my previous install (Debian, which I didn't use for long) I had these drives mounted under /media/store1 and /media/store2. This is reflected in the "Edit Parition: /dev/s***" options where the "Original File System Label" is shown as store1 and store2 for each disk
I have two NTFS volumes I want to automount at boot. I can't get my user account to mount them in Fedora 10. I keep getting the message that the two lines I have edited in fstab are bad. The volumes are sda2 and sda8, and the volume names are SPACELAB and Spaceman. I also need to be able to mount an NTFS usb drive from time to time. I am getting frustrated, so I have posted my fstab file below,
# # /etc/fstab # Created by anaconda on Sun Mar 1 12:44:11 2009 #
So far I've tried gOS, Linux Mint, Ubuntu, and SuZE. The result is the same: The live disk runs, opens up but the graphics are shoddy, sound doesn't work, everything is very slow, and in attempting to partition and install the os, it stays at "Resizing partitions 0%"I know Live disks are going to be a bit slower, but this is super slow and this computer is just a few months old. Usually the live cds have a database of drivers for common media but it just isn't accelerating the graphics or even recognizing my wireless. I know its not the CDs because they work fine on other (much older) computers.
I have a Mac Pro 1.1 and am having trouble installing Debian. I installed rEFIt but it won't show my install and live disks at startup. I have very little experience with the command line but would be willing to try. I have installed debian to my pc and used the command line successfully there, but want the OS for my mac.
I'm attempting to add an additional HDD to my system (without having to format it). I was told that I need to edit my Fstab. I'm trying to get an internal SATA drive mounted. I'm getting these two errors when I try and mount the drive DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
and
DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
my Fstab is as follows.
# /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5).
Sometimes Linux just make you want to throw the PC out of the window, and get a new one with WINDOWS on it...Having only just "got" the idea that there are a nunber of ways of issuing chmod, I now find that there is yet another when in the fstab file. It is an easygoogle to find out a workaround to make this drive RW, but doing that way one does not learn what is actually happening.how do I find out UID and GID? fmask and dmask, how do I find out what the current settings mean, and what they should be to allow RW access for various groups/users or for everyone?
I have been battering with FC10 and software RAID for a while now, and hopefully I will have a full working system soon. Basically, I tried using the F10 live CD to setup Software RAID 1 between 1 hard drives for redundancy (I know its not hardware raid but budget is tight) with the following table;
[Code]....
I set these up by using the RAID button on the partition section of the install except swap, which I set-up using the New partition button, created 1 swap partition on each hard drive that didn't take part in RAID. Almost every time I tried to do this install, it halted due to an error with one of the raid partitions and exited the installer. I actually managed it once, in about...ooo 10-15 times of trying but I broke it. After getting very frustrated I decided to build it using just 3 partitions
[Code]....
I left the rest un-touched. This worked fine after completing the install and setting up grub, reboot in to the install. I then installed gparted and cut the drive up further to finish my table on both hard drives. I then used mdadm --create...etc to create my RAID partitions. So I now have
I "upgraded" to Karmic and now my computer won't start. It shows the grub menu, I select the first Ubuntu option, and it shows the white logo. Underneath the logo these words appear, and it does nothing:Quote:One or more of the mounts listed in /etc/fstab cannot yet be mounted: /boot: waiting for UUID=338c820e..Press ESC to enter a recovery shell
ubuntu 9.10. Won't boot. Not a new installation, no new hardware. When I boot it up into 2.5.31-22-generic safemode it says: One or more of the mounts listed in etc/fstab cannot yet be mounted: /home: wating for UUID...
Booted up w/ live CD, fsck says that /dev/sda3 is clean I have a 320 GB hard drive, 20 GB is the linux boot, 2 GB is swap, and the rest is /home. Palimpset Disk Utility can recognize the 20 & swap, but says the rest is unrecognized.
I have a removable SATA Mobilerack which i use to play with.It has redhat linux loaded on a 500GB disk and i made a new partition using fdisk and then made an ext3 filesystem with mkfs. I then tried to edit fstab to add the new partition but have obviously stuffed it up. When I tried to reboot I get the error fsck ext3: UNABLE TO RESOLVE `LABEL=/mnt'.
I have 600GB striping disks with 3 ntfs partitions, 2 ext4 partitions and 1 swap partion containing ubundu 9.10 and 120 GB free space. When I try to create new ext4 partitions with the fedora dvd I get the message: Could not allocate requested partitions. Not enough free space on disks, no matter how small the partitions I try to create. I created logical partitions.
I have made an entry in fstab that is keeping me from booting. I am able to get into recovery either from entering "M" as it is trying to mount my bad entry or from Grub.
However once in recovery I am unable to save my edits in vi. I have tried several attempts at saving my edits to no avail. What trick will I have to impose in order to clean up my fstab so I can boot successfully.
I just bought two 320GB SATA drives and would like to install F11 with software RAID 1 on them. I read an article which explains how to install RAID 1, but it used 3 disks: one for OS and two clones. Do I really need a third disk to install RAID 1 configuration? If 2 disks is enough, then should I select "Clone a drive to create a RAID device" during F11 installation as explained here?
no idea what went wrong. computer was apparently shutdown halfway through installing major system updates. now booting into terminal(gnome?), and displaying error messages: one or more of the mounts listed in fstab cannot yet be mounted: (esc for recovery shell) /: waiting for /dev/disk/by-uuid/[loooooong string of aplha-numeric(a/#) babble] /tmp: waiting for (null) swap: waiting for uuid-[another (diffrent-but-similar) string of A/# babble]~~user input: esc (the phrase: '^] pops up)
[Code]...
i'm over my head. i tried everything from chmod on 'lock' to gethost (which turned out to not be installed.) nothing is working yet.
I try to install by clicking "Install to Hard Drive" icon on the desktop, but it's not responding. And then i try '/usr/bin/liveinst' and i got the following error :
Code: umount: /media/*: not found 07:27:29 Starting graphical installation... Traceback (most recent call last): File "/usr/sbin/anaconda", line 876, in <module>
This usb-memory-stick loaded wtih fedora11 and 4GB space for persistence runs nicely When I click install icon and choose "shrink other partitions" or "use free space for installing", it aborts.I've tried installing on C hard drive and on 300GB-usb-disk with lots of free space; still won't work
just about to install Fedora 10 on my MSI WIND laptop and read abit about file system on Linux and come across alot of recommendations on how many logical mounts or partition to create..so far i have created /boot of 100MB.i'm unsure of what sizes i will give to my [root] / and /home and /swap
i am thinking of assigning 1GB to /swap which leaves me with 40GB left for / and /home.i'm going to install alot of softwares and probably try out wine as well.i want a separate /home directory incase i change distro then i'll keep it... where does the programs go to under?
So lets start with my laptop. I am currently running windows vista 64-bit and I usually experiment with linux on a virtual machine but I decided to try and put it on as a dual boot os. I have x3 320gb hdd (7200rpm) on raid5, x2 1gb nvidia gtx go running sli, 8gb ram, 2.8ghz core2 quad, and random other things that aren't important. Point is that my system should run anything I throw at it.
So I downloaded Fedora 11 from a torrent and burned the iso to a disk. When I run it, it pretends its going to run it, it comes up with a log and loads stuff and all. But then it just hangs.. it doesn't do anything, no live starts, no nothing. Its just a blank screen with a blinking underscore in the top left "_" so I type and my typing shows up and thats it. Any other time I've used Linux I've never had to put in a command or anything to start, so I don't know what the problem is.
i am not sure where to post this issue since i am using RC4 of FC12 so posting it here.I am using the Live-CD to install FC12-RC4, it is gnome x86_64. The issue is as follows:I never had this with OpenSuSE. Mandriva & Ubuntu all of which is the latest release. Why the installer has to initialize the hard disk?
For the last two releases I've used pre-upgrade ( F11>F12>F13 ). While F13 is working OK it's showing one or two minor glitches, such as the odd hang and sometimes part of the Gnome taskbar doesn't load. I realise these may be just F13 issues, but in case they're due to accumulated errors in two updates I'm planning to back up and do a clean install of F14 - once the feeding frenzy has died down.
The question, as posed in the title, is whether to D/L the full DVD or install from a live CD and add the apps I need. For instance, I don't need to network with my other computers - data transfer is by ' sneakernet ' with a pen drive - and I'm sure there's quite a bit else I can live without which the standard DVD install will contain, such as chat. Conversely, I'll be installing some extras such as Google Earth using AutoX.So basically, will installing from a live CD be any real benefit or will I just be making work fro myself? I frequently notice updates which don't seem to have much to do with the apps I use regularly, but they may contain essential dependencies.
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
i have a hp dv6707us with windows vista and i'm trying to install fedora 10 x86_64 from a live cd, when i try to use the live cd it shows a screen saying that it will boot after 10 seconds, then appears a black screen with a loading bar with fedora 10 word next to it when the bar becomes completely white along with the word fedora 10 it doesnt happens anything and any indication of what could be wrong then i type enter and it reads the live cd for a while then a black screen with a blinking cursor appears and yet nothing happens i wait until i get bored and cancel the all the process.
I recently started trying fedora 10 out on live cd (in my case usb ) and loving it. I want to install it, should I get the dvd image, or would it be okay for me to just install off live cd (usb) and install whatever I want through the package manager later... Why/why not? Also on live usb, I can't find the package manager under applications.
This is my Fedora 11 installation review:The pc (cd2, 7600gs, 2gb ram) boots ok from any of the many Fedora live cd/dvd.After booting it goes to a nice window with a (3 colored flashing forward motion) tollbar at the bottom, where the words Generic 11 are written at the bottom right.
So far so good: no questions to answer, the Dvd is speaning out loud. 2 min later the above mentioned screen changes into a b&w verbose mode sreen.After a dozen of written lines, where the last one says "bridge firewalling ..." the drive noise gradually extinguishes, its red light turns off, the b&w verbose screen dies and even the Pc looks like dead too. Could be waiting here until next day, nothing more happens. So, I do various alt/ctrl/del, until the Cd/dvd (liteon) ejects and the pc reboots.
This is really CRAZZY. Lately I'v been trying many different distribution installations and this never happened. It's equal with any of the many fedora live cd/dvd's, window manager's, 32/64 bit. I did try last week, 2weeks before, today.... and did also try fedora Omega but is the same result at the end.I wonder if this is just me, missing some Fedora fundamental specific thing, or if ithis has happened to some of you.I browsed and searched but this looks like an uncommon issue, as I didn't find nothing similar.
I've installed Fedora to dual-boot with Ubuntu. I'm using /dev/sda1 for Ubuntu, and /dev/sda3 for Fedora. Unfortunately, I unchecked the "Install boot loader" checkbox, so I still have the Ubuntu boot loader but no way to boot Fedora. While still logged into the Fedora Live CD, how can I install the Fedora boot loader to /dev/sda3 and set it up to chainload from Ubuntu's GRUB menu? (I'm thinking it would be 'grub-install /dev/sda3' as root, and then just edit /dev/sda1:/boot/grub/menu.lst, but I'd like confirmation.)
