When I start my computer GRUB starts, but it only says:Grub Loading stage1.5.Grub loading, please wait...and nothing happensHere is what happened before:I had a dual boot on my computer with Windows and Ubuntu. There was also a problem with Windows, but that's another thing. Now I had not upgraded Ubuntu for a long time. I think I still had Ubuntu 8.9 . So I wanted to upgrade and let Ubuntu do it automatically, it showed the upgrade to 9.4. So let it upgrade, but it asked if it had to change menu.lst, but since I had menu.lst modified in the right way, I choose the option to keep the already installed version. But it just kept asking the same question, so 4 or 5 times and a few hours later I choose the option to change it to the default package version. Then it didn't ask this anymore, but it hung at a later stage.
So I waited several hours longer, but it didn't proceed anymore, so I had to shut it down.It shut down OK, but then when I restarted, what I described above happened.Now I have another problem, my disk reader (CD/DVD) doesn't work either, so I cannot simply use a LiveCD.
I installed a suse 11.3 on my acer laptop and it worked just fine for two days.I was able to use internet as well though wi-fi driver i still had to figure out.This morning when i started it, it gave me an error like this:- Failed to load grub Error 18 now from what i understand is the solution is to downsize the harddisk partition used by the linux root to somewhat 10gb.Mine is about 40gb.
So i thought why not re-install the os again.But even after changing the bios setting to boot from cd-rom and putting in the suse dvd still its not booting from dvd and continously giving this error Error 18:Selected cylinder exceeds maximum supported by BIOS and then it comes to a command prompt like this grub>
I have a laptop with Windows 7, and about a week ago I installed Ubuntu 10.10 64-bit via LiLi USB creator. Worked beautifully, but I was having some issues with the brightness controls so I decided to get cute and upgrade to 11.04. So I downloaded the beta2 and used LiLi to make the USB (unsupported for that version of course) which used the same parameters as 10.10. I then tried to do a fresh install over the partition I had set aside for Ubuntu and had 10.10 installed on (~80 GB).
So in the installation itself, something got majorly screwed, and the entire system froze. Next thing I knew, I was rebooting and got the Grub Rescue prompt and no ability to load into either my old Ubuntu 10.10 or my new failed 11.04, or of course my Windows 7 partition either. The partition is obviously there, and as I only have one PC in my house, with no Windows 7 recovery discs, I currently cannot fix the mbr to just get my Windows back. I can of course get this in a couple days, but I'd like to be able to fix this without going to my parents.
[Code]....
Those are my partitions. /dev/sda3 is my Windows Partition, which I want to boot from. Only problem is, I'm not really sure where the computer is looking to find the boot record. I think it's from my fubarred /dev/sda4 partition which means it's basically looking nowhere. So I can't modify it to point to my Windows so I can just get back there.
I had installed Ubuntu 10.04 within Windows 7nd everything work perfect until this morning. When I turned my laptop on I was told that Grub could'nt find the storage device and was presented with a grub command line
I tried to install debian on my system using a small image at first that would download all the necessary components during the install. It loaded everything except Grub, and wont boot. I need to rescue this as the downloading of all the components took ages and I don't want to do that again.
I currently have a Dell Dimension 4100 from 2000 upgraded with an Nvidia Geforce 6200 video card and 160 gig hard drive, I just upgraded to Ubuntu 10.10 from 10.04 and once I restart, I hear a beep come out from my computer speaker, and then displays the following text:
Code: GNU GRUB version 1.98+20100804-5ubuntu3 Minimal BASH-like line editing is supported. For the first word,TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
grub> I'm not used to typing in command line, but if anybody has a way around it for me, I'll be pleased. It's Ubuntu or Windows goes back on... or bust.
I am dual booting windows 7 and Ubuntu, and since the upgrade from 9.10 to 10.04 Windows 7 won't load.I tried the solution posted in another thread with a similar problem but to no avail.[URL]
I've just tried to upgrade my Fedora 9 (x86_64) installation to Fedora 10 using the installation DVD. The upgrade seemed to proceed very smoothly, no errors ,nor warnings, it just seemed that it is upgrading grub (yes, I chose to upgrade grub as well) and all the packages (it took about 20 minutes). However, after the upgrade was over, it asked me to reboot my computer, so that's what I did, I took out the DVD and waited for GRUB to load.
It loaded just fine, but I was quite surprised when there was no option to boot Fedora 10 in the list. Ok, so I booted into Fedora 9 which went fine, the layout changed to the new one and some programs don't run. When I looked into /lib/modules I couldn't see any fc10 kernel installed. So the question is what happened and what should I do, so that it upgrades to fc10?
I started the upgrade and the system is nearly completed but I there is a problem with GRUB.Most likely since I am dual boot with win7. So right now I have a pop-up message that says...GRUB failed to install to the following devices:/dev/sdbDo you want to continue anyway? ect ect ect...I have not rebooted and completed the installation yet as I figure its probably easier to fix this now while I have the full system up and running vs having to fix it via live cd.
I installed a new Ubuntu OS in my computer, (I downloaded it yesterday) on a dual boot pc (windows xp) Installation went smooth until it reached grub-pc. It was installing grub-pc (1.98 lubuntu6). It hanged there for several hours. Finally I interrupted the installation. When I went to the installed packages I got a message telling: Grub-PC 1.98 Lubuntu 6 Failed to Install or Upgrade. I'm pretty new to Linux so I know nothing about it, but I wish to go away from Windows XP.
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition dev/sda2 Windows NTFS dev/sda3 Windows FAT
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
Upgraded from Ubuntu 9.04 to 9.10 via upgrade manager System is AMD 64 Have dual boot with XP on seperate hard drive
[code]....
Then the wheelspin:
Seem to have knocked out GRUB as normal loading screen does not appear anymore. Worse, I think I accidently installed grub to something labelled SDC5.
Cannot get anything except the "grub rescue" prompt. I'm not sure if using the LiveCD (9.10) can help. Have tried a few prompts from other threads but just ended up with mud splattered all over the place. I'm gathering I need to load grub, but can I do it using any grub rescue commands?
When I start the computer the boot menu doesn't prompt, when I try to load it manually it doesn't prompt neither, it just reset the command line.The grub.cfg was generated by update-grub.It's really annoying to load the kernel manually each time the computer starts.
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---
OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
i installed ubuntu 11.04 on my presario cq40-115au but it does not load the default gui (unity). i only see a blue background and an icon of my other partition on desktop. even alt+F2 does not pop the "run application" windows. anyone had the same issue? especially with radeon hd3200?
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
I have had a few X crashes and started to suspect compiz as they usually happened when I was resizing a window or the window was wobbling.
Here is the Xsession-errors log (it's a hidden file in your home folder). It mentions:
Code: WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug! Starting gtk-window-decorator Unable to find a synaptics device.
My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:
(EE) NVIDIA(0): Failed to load NVIDIA kernel module! (EE) NVIDIA(0): *** Aborting *** (EE) Screen(s) found, but none have a usable configuration
I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).
Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.
I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.
Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.
Here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010 Section "ServerLayout"
My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got
Code: Warning: Unable to locate/open X configuration file. New X configuration file written to '/etc/X11/xorg.conf'
Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.
I am trying to fix my friends laptop and after the most recent upgrade she performed she got this error message when her laptop boots. Thing is that it stays frozen in that mode. I don't even see the grub boot loader. I know its the only operating system she has running on her laptop as well. The following error was encountered. You may need to update your configuration to solve this.
(EE) NVIDIA: failed to load the NVIDIA Kernel module. please check your (EE) NVIDIA: system's kernal log for additional error messages. (EE) failed to load module "nvidia" (module-specific error, 0) (EE) no drivers available She is running ubuntu 10.10
When my server starts I received this text:No kdump kernel image found:[WARNING]Tried to locate /boot/vmlinuz-2.6.18-164.6.1.el5.centos.plusLoading kdump:[FAILED]
I recently brought home an old Compaq server from work. I was told that it works fine. When I brought it home, I tried installing Ubuntu 9.10 server from a cd. While it's trying to install, I get the message "Installation step failed. An installation step failed. You can try to run the following item again from the menu, or skip it and choose something else. The failing step is: Load installer components from CD." I turned off the computer and tried it again several times. Each time the same message appears.
Ubuntu 9.10 stops booting with apparmor profiles failed to load error message in recovery mode.In the usual mode it hangs at the logo stage.I tried all the kernels listed but the boot process hangs every time.I searched for a solution but could not find it. Windows 7 boots fine.I haven't installed grub to the MBR.I had to reinstall the windows bootloader but I am not sure if it's related to the problem.I would like not to reinstall the os.
I made a backup of xorg.conf and added Xinerama and the other configuration items I needed. X failed to load. Then I copied my backup to xorg.conf and...X failed to load. Then I tried booting up in safe graphics made, and X failed to load. I tried dpkg-reconfigure xserver-xorg, but it did nothing. Literally nothing -- no error, no output, no nothing. Then I saw someone who had suggested to apt-get remove --purge xserver-xorg, then reinstall it, and X failed to load.
I am at a complete loss. I have now read that the dpkg-reconfigure xserver-xorg is no longer used, that the os is supposed to autodetect everything now, but in that case I don't see how I will ever get dual monitors. In any case, I can live without dual monitors, but I need at least ONE monitor, and I have no idea how to get the configuration working.
I am using Ubuntu 10.04 LTS.With the last update, I have installed the kernel 2.6.32-33.And I have the message "module nvidia failed to load" in Xorg.log.0 My "current" nvidia module is 195. I have tried without success to reinstall nvidia. What I must do ? Wait for a new update of nvidia ?
