I have downloaded some files and saved them in one of my partition. But when i boot back from windows 7 those files were not visible. So i went back to fedora and found that the files are no longer there then i tested by saving some other files in the partitions and when checked through windows 7 those files are gone. they are not available anymore....i searched everywhere through both OS but couldnt find it.
View 2 RepliesI dual boot Windows and Ubuntu dual on my computer. I made the big mistake of moving a bunch of files directly from the ubuntu partition and now all those files are gone. How can I get them back?
View 1 Replies View RelatedI have downloaded the rpm file "rpmfusion-free-release-stable.noarch.rpm" from internet and tried to install this(VLC) on fedora 10 by running following commands:-
rpm -ivh rpmfusion-free-release-stable.noarch.rpm
Then it showed me finishing installation. But I am not able to find out where it is installed? I am not able to use this software. From where I an get these details .... it is not showing me under the Applications----> Multimedia.
What I would like to do is create a good firewall and have it saved so it doesn't get lost through reboots. I have read the iptables document and the ufw document but it's still a bit confusing.
What I would like to do is be able to browse the web so I need to have rules for that as well as https. I'm not sure what rule I need for DNS for DHCP. Other than those basics I don't want anything else to happen save for updates. When I get more used to it I will add more rules if I need them. I also want IPv6 off, for incoming, outgoing and forwarding, and my guess is that I do not need any forwarding for IPv4. Ah yes and I need the loopback working.
iptables -P INPUT DROP
iptables -P OUTPUT DROP
iptables -P FORWARD DROP
[code]....
Whenever i try to download something i do not know where they are saved to. for example, i just tried to download the skype beta for ubuntu. the firefox download prompt pops up with the only option being "save file". i click save file and then the prompt closes and nothing happens.
how to handle such downloads.
I'm setting up a single stand-alone computer in my classroom to be used by my students at the school where I teach. I've installed Ubuntu, as it smashes Windoze out of the court every time.
I want the students to be able to log on to the computer using just one account: 'Student'. This computer will be attached to a printer so they can type up and print oOfice documents,web pages, etc. However, once they log out, I want any files they might have saved (such as a word processed document) to be removed/deleted from the account so that when another pupil logs on to the 'Student' account they start with a clean slate. I suppose you could call it a sort-of Kiosk account.
How can I get Ubuntu to clear any saved documents on log-out?
I had some important data on a ntfs partition and an extended one. I selected "create partition table" on GParted and now every thing is lost as it's said here: (it's just an unallocated space)URl...in the page linked above it's mentioned that testdidk can help. I have installed it. how can I recover my data now?
View 1 Replies View RelatedI downloades some files with jdownloader, i choose a a folder on my windows partition, but the files where saved on /root/Desktop/V . i'm trying to cut them into other folder, but it fails. Now my free space on ubuntu is 0!
View 1 Replies View RelatedI had 10.04 installed in parallel with a bad windows OS. Used the 10.04 to pull the documents, pics, etc off of windows. Worked great. Then when I tried to delete the windows partition it screwed grub up an instead of just re-installing grub. I re-installed ubuntu, what the heck it was gonna get wiped anyway. I didn't back up the pics and documents. I did however have them in all the ubuntu folders for my pics etc.
I feel like total crap, anyway, how good of a chance do I have at getting something back with testdisk? After doing a "deeper search" I come up with multiple partitions but it won't let me restore all of them. I really dont care if I can't boot to a single one, just as long as I can get the data back. (always can use a live CD).
I just downloaded a file that ends with .Repo, I believe it's a repository file. How should I install this type of file and where/which directory it should be extracted or saved to?
My apology for being a suzee nubbee (Windoz refugee).
I've had a problem for a while-- when I save files on a USB stick in Ubuntu, then put it in a windows computer, it doesn't recognize the files. It only recognizes a video file that I have, but not the .doc files. The folders either don't appear or only appear as shortcuts.
View 9 Replies View RelatedI'm saving files onto my NTFS partition from Ubuntu (Karmic, dual boot with Vista Home), but, although the files appear to be there, they cannot be read. The error message is 'File not Found. Check the name and try again'. File appears under Windows Explorer and has a file size of 986K.
View 1 Replies View RelatedI woke up this morning to a non-booting 9.10 computer. After my grub screen disappears, I get the familiar Ubuntu b/w logo in the center of my screen. My hard drive cranks for an abnormally long time and then I get the following error:
I booted into a live CD and opened up GPARTED and my sdb4 (my /home location) partition shows up. I do a check on it and it seems ok.
I opened the Palimpsest Disk Utility to see what it said and it shows sdb4 as Unknown or Unused. I can not mount this drive using GUI methods.
I did some research on the forums looking to recover lost partitions. here is the output from fsck
Code:
and the abbreviated output from fdisk -l
Code:
Disk identifier:
This seems ok too.
My next step was to try testdisk. When I ran it, I was able to navigate this partition and apparently see all my files. I then tried to mount the partition manually.
Code:
That also worked.
It seems to me that I practically have this thing where I need it without too many worries.
My question is: What is the next step to get this back booting again? I'm afraid of rewriting the partitions in testdisk until I get some feedback on whether this will really solve my problem. Maybe the partition isn't the problem? Is it something else and I've been going down the wrong path?
I had two ext4 partitions; one had data and another didn't. I wanted to merge them using Gparted, but couldn't find the option. So, I deleted the second partition making it unallocated and used the 'resize' option to merge both the partition. Now, the partitions are merged but I LOST THE DATA..
I am seriously f**ked up.... What can I do to get those data back. I haven't done anything to the partitions after data: no adding data, no formatting.
I have just had to reinstall my OS (Sabayon) onto a new and larger hard drive (dying old disk). I quickly saved all my old docs in /home on an external USB drive (formatted and then created an ext4 file system) before the swap and installation.
After getting the new disk running I connected the USB external disk. First I could not access the drive at all, but that seems to be fixed. Now I want to bring all my files back to my new /home folder but apparently they (especially the former MS Office .doc, .xls, etc files, not so much the OpenOffice files) are �read only� and I don't have permissions anymore. I am able to create directories on the external, and can move files back and forth, but don't seem to own many of them.Sabayon automatically mounted my external disk in /media/disk, rather than /mnt, so I've left that alone for now. After searching here and elsewhere for info, I tried a few things (below): For access I added a line to /etc/fstab:
Code:
/dev/sdb1 /media/disk ext4 noauto,rw 0 0
Here's what I've done to try and fix ownership already:
in /media I:
Code:
# chmod 775 disk
which gives output of:
Code:
media # ls -l
total 4
drwxrwxr-x 2 root root 4096 Nov 1 21:30 disk
[code]....
I'm not sure what the �total 4� refers to since there is only the one directory �disk� inside /media but I assume that's not part of this issue... Does adding umask=0 have anything to do with this, and if so where does that go?
As I type this, I'm waiting (and waiting) (and waiting) for the Repair Tool Box, "Search For Lost Partitions" tool to stop running off of the install CD. I didn't actually mean to do that (I meant to select "repair file system!) and I don't see any way to abort it! How to I make it stop? (You can insert your best Deanna Troi voice there, if you like: "make it STOP!") Or do I just wait until sometime next week for this rascal to finish examining a THREE HUNDRED GIG partition, byte by byte . .. ?
View 3 Replies View RelatedIs there a way to update my distro with a newer version and not disturb saved media files? Music and pictures etc. Can I move them to another partition. Its there a better way than to save it to disk?
View 13 Replies View RelatedI was moving a folder using Nautilus from an internal drive to a USB drive when suddenly, the power failed and the system rebooted before the UPS could go into backup. After I booted the PC again, half the files are are in neither of the drives. Do they go into a temporary folder first? There's nothing in /tmp and there's no Lost+Found folder. Is there anyway to get back those files? I'll always copy and delete from now on instead of moving.
View 2 Replies View RelatedI'm new to Fedora; been using it for just a few hours. I have Fedora 10 setup on a LiveUSB and it works great. However, any setting that I make or files I save are gone when I reboot. For instance, I change the mouse cursor speed and made a "Test" word doc and saved it to the desktop. Yet when I reboot, the "Test" file is gone and does not even show as a recent document and the mouse speed setting was set back to default.Am I missing something that need to be accomplished prier to the shutdown?
View 7 Replies View RelatedI'm running Fedora Laughlin 14 (that may be redundant, but I'm new to Linux still) and am trying to backup some files so I can wipe and start over with a partitioned drive. The thing is, I'm having trouble with Gnote. Where do these notes get saved? I found a post saying it was /home/user/.local/share/gnote/ but I can't seem to find this folder. Unless I'm going about it in all the wrong ways, it doesn't seem to exist. Is my only choice to c/p all the notes one by one into another file type, or is there yet hope for finding the folder they're saved in?
View 1 Replies View RelatedAfter booting, logging into KDE i click the System Setting>Display and the screen resolution becomes 1024x768(60.0Hz).I do this everytime to get this resolution.Is there any way to save the screen resolution? And nothing happens if i press "Print Screen SysRq" from keyboard, so can't get any screenshot.
Why doesn't "Print Screen SysRq" work?
I'm having a problem with the mesa-dri-drivers-experimental, I bought a new monitor, Samsung 24" Widescreen LCD Monitor (B2430H) and my old monitor was a 24 inch too but with a different native resolution, my new monitors native resolution is 1680x1050 and I try to change the settings in the system settings/ display/ size&orientation area since the mesa drivers don't have a xorg.conf but my settings don't save after a reboot. Is there a config file for the mesa-dri-drivers-experimental where I can change these settings?
View 5 Replies View RelatedI have the problem that Fedora doesn't save my default applications.When I change it, it does work for some time, but when I reboot it's all gone. So every time I open Chrome I have to select "Make default browser" (very annoying). It doesn't save the default settings for specific extensions neither. For example when I open a .exe file it always open with Archive Manager now while I have selected Wine as default program for that.
View 5 Replies View RelatedI have been using Nautilus file browser in my fedora 11 desktop to browse Samba shares of our servers. Let me explain my problem.
We have two users test1 and test2 who can access Samba shares for downloading and uploading files.
test1 has read only access.
test2 has read/write access.
When I initially connected to the samba share through test1 user through Nautilus file browser I clicked on remember password.
But now when I try to access the share again, its not prompting for password. It is directly taking test1 user's password who doesn't have write access to share.
How to get the password window back to fill test2 username and password.?
Not sure if others have noticed this. When I go into sound settings, click the output tab, select the sound device I want to edit and change the bass levels etc, close the window and go back in all the settings are reset to default and no changes are saved.
If I leave the window open and make the changes they are reflected in VLC for example, but if I close the window it again resets to defaults and my Bass is back at Maximum....
Is this a BUG I should report or is there something I can download to get this configured elsewhere or to fix this issue? I seem to recall something similar in Fedora 14 that was fixed, but I cant remember how I did it now
I have F15 and use networkmanager to connect to wifi networks. How do I edit the list of saved wireless networks that it tries to automatically connect to? I need to get rid of some networks that it is always trying to connect to.
View 2 Replies View RelatedI recently installed Fedora 14 KDE and NVIDIA proprietary driver for GeForce FX 5200. I'm able to change the resolution to 1920x1080 (Acer H213H 21.5" lcd monitor), but when I restart the box, I lose these settings and I have to fiddle with NVIDIA and KDE monitor settings until I get the settings back.
Here is my xorg.conf file:
Code:
Is this (in)correct? What else can I try in order to keep my resolution at 1920x1080? When I restart, it reverts to 640x480.
I didn't have this problem before installing NVIDIA driver, however, I had visual anomalies and slowness in video refresh/repaint whenever moving windows. I don't want to go back to that so I'd like to see how to permanently propagate my resolution settings through reboots of this box. I've search multiple forums with no relevant hits as far as I was able to discern.
How do I move files "lost+found" and "boot" from filesystem into a larger partition my harddrive? I am using Fedora 12 and am new to the system.
View 6 Replies View RelatedSo I was messing around with LVM trying to turn 3 ~300GB drives into one LVM under 1TB. I scrapped the idea after not being able to combine hdc and hdd into a VG called doctor/frankenstein while using hde as swap space to move the single ext3 primaries onto the VG. I am now battling to recover the contents of hdc back!
View 1 Replies View RelatedI upgraded from Fedora 10 to Fedora 11, and it seems that when I saved my main.cf file, something changed in the versions and it no longer works. I've tried going through the file and tweaking it, but it's not working. Here is the postconf
[Code]...