How do I move files "lost+found" and "boot" from filesystem into a larger partition my harddrive? I am using Fedora 12 and am new to the system.
View 6 Replies
I have a ubuntu 10.10 server with apaceh2 and php and I want to open a file larger than 2gigs
I've read there is a flag that needs to be compiled into php to do this ?
I erase XP and do a clean install of 10.04 netbook remix on my Acer AspireOne. Almost everything seems to be working ok (so far.....3hrs after installation and still testing!) except for:
1: My main partition is formatted as ext4, and when I try copy back any (video .iso !) file that is larger than 4.1 gb I get a memory error and so only copies the file incomplete up to 4.1 gb. I know this problem under windows FAT vs NTSF but I have read that ext4 was beyond this... So what did I do wrong? Is the solution to switch the ext4 to ext3 and can this be done without loss of installed programs or files.
2: Video and Sound with video is not good. Lots of disturbance/turbulence and for sure not optimal for both video and sound.
3: my internal micophone is not working in Skype but it does with Sound-Recorder...I connected external mic and this works, but with lots of disturbance. Also the voice sound from telephone calls sound is not as should be.
The "hardware drivers" utility tells me that all is good and no proprietary drivers are in use on the system.
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
During attempted repair of damaged USB stick with fdisk and parted, an error appears to have changed the partition holding the /boot partition. At one point I possibly typed sda1 instead of sdb1 and appear to have lost my /boot partition.
This is on a HP Compaq Presario CQ50 228CA Portable running only Fedora (No multiboot).
I am able to reach most of the programs and data on the machine with the rescue mode from the F12 x86_64 DVD, chroot /mnt/sysimage command - so the main part of the system is still available. But when the machine starts up all I get is the 'grub:' prompt. In rescue mode I can cd /boot but there is nothing to list, and certainly there is no /boot/grub. fdisk /dev/sda1 p reports 255 heads 63 sectors/tracks 25 Cylinders Units=cylinders of 16065 x 512 = 8225280 Bytes Disk Identifier 0x0000000 - and then nothing under the headings Device, Boot, Start End etc...
Previously /boot was on /dev/sda1 a 194 m patition, with 39m used and 146m available (according to logwatch mail),
My questions:
Are there any commands in the grub program that would help my recovery - I doubt it, because grub is in place and running but I am not sure. Could I using fdisk recover the sda1 partition and it's contents? If so - how? If no, could I use the F12x86_64 to update and hence recover the /boot drive and retain the the LVM volumes both programs and content? If no, is my only option to reload F12 from the start, then rsync in my backup /home directory?
Since there had been a fair amount of customization done on the previous F11 which had been preupgraded to F12 I would prefer any option that would retain the customizations ...
I wanted to experiment with Fedora 14.
The machine has Windows XP and Ubuntu 9.10.
Before today when I turned the machine on there was a black screen with many Linux kernels to choose from and Windows.
I created another for Fedora and installed it on there - the Ubuntu root partition is still there.
When I boot now, there is a blue Fedora screen with just it and Windows.
To make matters worse Fedora doesn't work with my graphics card (Matrox). I would like to get Fedora working but still want to have the ability to use Ubuntu again.
What do I need to change to be able to boot into Ubuntu again and how do I do it?
I'm sure that this is posted somewhere but I have not been able to find the right search terms. I have a Dell Vostro 1700 which has 2 physical hard drives. I installed Natty to the 1st drive and during the install I used the entire 2nd drive as /home. I would like to upgrade the 2nd drive to a larger faster drive. I have the new drive in a USB enclosure so that I can access both drives. I'm pretty sure I need to boot from the CD to do this. Then I need to copy all files unmount the small drive then shut down, install the larger drive and have the system recognize it as /home. I am just starting to creep out of N00B stage and don't want to screw this up.
View 2 Replies View RelatedHad a bit of a partition nightmare during an install, involving my home directory.
My partitioning looks like this and my install is still completing:
sda1=/boot
sda2=/
sda3=swap
sda4=/home
My old home partition and data is located in a partition that I preserved, called /homebak and is on sdb.
Once my install is complete, what is the best way to move the data from /sdb1 (homebak) to my newly created /home?
For the record, I tried to copy the partition during set-up, but something wasn't happy.
I've got my important files backed-up, but would prefer not to lose about 5 gigs of music and video.
I installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
I want to install and dual boot ubuntu and windows 7. Now when I go to see what my disc looks like so I can shrink some partitions I see one unnamed one that has no filesystem already there. (See Picture). Now my laptop came like this, I never added the partitions, they were just there. So I was wondering weather or not I could install to that partition safely, as in I'm not overwriting some sort of important windows 7 thing.
View 2 Replies View RelatedI need a reliable+fast filesystem for root and boot partition. It will be used in Debian x64. So far I only tried ext3 and ext4. What do you reccommend? (this has been probably asked many times, but I need updated information)
View 2 Replies View Related10.10 on a ext4 partition. I deleted a folder that sat on a NTFS partition that I use as data storage. I note that if I delete folders or files on this NTFS partition there is not the option to move to waste basket - it is just deleted. If the folder still exists on the hard drive (has not been over written) I may be able to retrieve it - but where could it be? On the NTFS partition?
View 2 Replies View RelatedI edited fstab so that my Windows disk partition will be automatically mounted when I log on. However, when I delete a file from said partition, I am told that the item(s) cannot be moved to trash - I can only permanently delete files from the Windows partition. Here is how I configured in fstab: Code: /dev/sda1 /media/Vista ntfs nls=iso8859-1,umask=000 0 0 I suspect I mis-configured the options. Can anyone see an issue?
View 1 Replies View RelatedIve been running crunchbang on my system, and yesterday decided to try opensuse so i can install the novell client. I ran the live gnome cd and during installation I shrank my main partition down and created a new partition for opensuse. Installation went well other than sometimes programs close and make the part of my desktop that they occupied useless.
Question 1) I can see my crunch bang files through opensuse but i cannot find or boot into crunch bang.
question 2) Why are these programs closing and then killing my desktop? Say i have a Firefox in the top left of my desktop and it errors and closes. I go open Firefox again, anywhere that the old Firefox window was in ( not click able). My cursor will turn to the text cursor as soon as it enters the x y position. I have to restart the laptop to be able to click file or insert a web address.
I have two disks in a RAID.
Code:
SATA device C465.76 GBATA WDC WD5000AVDS-6
SATA device D465.76 GBATA WDC WD5000AAKS-0
[code]....
We had a drive failure on /dev/sda. Everything 'except' boot was on raid5 across sda, sdb, sdc, sdd. I know how to repartition a new drive and rebuild the raid etc, but I don't know how to regenerate the files that reside on the boot partition. I really don't want to re-install as we have lot of custom code and software that may depend on our current libraries and build environment.
View 1 Replies View RelatedUsing Samba I have looked into the file that stores all my web sites, there were a few strange files that get larger and larger all the time. File names are _Za01716 and _Za01820, they are nearly 50mb in size now. I know these are not Log files so what are they and can I delete them?
View 1 Replies View RelatedJust delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
Can I safely remove the lost+found folder from a disk that is going to be used exclusively for music?
View 3 Replies View RelatedI'm trying to restore an image from a 40gb partition(6gb used) to a 100gb partition. I set everything up in gparted and and restored the partition image with clonezilla. In gparted, the partition shows the full 100gb partition with 6gb used, however when I boot windows and open the properties on the C: partition, it shows that it's only 40gb. Is there some setting to restore the partition image and use the full 100gb?
View 7 Replies View RelatedI have this file that is about 3.6GB, I'm trying to open it through wine. But it gives me an error saying I can't open it. I'm not sure if this is a problem with wine, or do I need some special code to put in the terminal?
View 5 Replies View RelatedI am using Fedora core 10. I have changed my partition size of Linux from windows. After I finished resizing the partition, I rebooted my system to the Linux platform. While booting it gave me an
error: repair filesytem #1:
I don't know what to do?
Until now I always used a non-journaled filesystem for my /boot-partitions.But as it would make system restoring much easier after crashes I would prefer to use ext3 for my /boot-partition as well.Is this possible, and before all, recommendable?
View 7 Replies View RelatedI am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
I just installed Fedora on my pc with windows XP pre-installed (dual boot). I had the same setup with ubuntu before with no problems. My ntfs windows partition is of 15 gb approximately and the remaining space that was available for fedora was about 220 GB (non partitioned - I removed all the partitions excepting the windows one using gparted from liveCD prior to beginning installation) ..........after installation etc etc.....my home folder shows me only 150GB of space.....what's happening? Where has all the remaining space gone to?
View 8 Replies View RelatedI have just spent dome time using gparted to sort out my partitions. I have a vista partition, a fedora one and a big chunk of unallocated space I wish to use as my data drive.
I want to move my ~ folder to the new partition and have windows/vista access the folder and write to the Documents, Downloads folders etc.
What is the best format to use?
Also I plan to start backing up my partitions to a server, for instance using g4l to save a linux image (maby a windose one too). Is there any benifit in keeping all the hidden files (ones starting with period '.') i.e moving the whole ~ folder or would I be best off leaving the ~ dir and moving the folders I know i use such as ~/Downloads, ~/Documents etc?
And how should i preform the move of all these files? 'mv'? do i need to add any special options?
I just installed F13 x86_64 on a system that used to be running Windows 7.
The boot drive is a SATA drive attached to the motherboard which is working fine.
However, my data drive is an NTFS partition filling a 3.6TB SATA raid.
It's GPT--Gparted sees 3 unknown partitions, and gdisk shows:
Code:
How do I mount this in Fedora 13? I had intended to shrink the NTFS partition so that I can create an ext4 partition to move the data to. Will this be possible?
I've got a LOT of valuable data on this drive, and nothing else big enough to store it.
I am facing a strange problem in my server, One of my filesystem shows as 3.1G when I execute df -h command and the utilization shows as 83%, but when I cd to the directory /usr/local I could not find any huge files in that filesystem and I have searched for hidden files as well,
groupserver:~ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda9 3.1G 2.5G 532M 83% /usr/local
groupserver:/usr/local # du -sh *
0 bin
93M abinav
[Code]...
This is very bad even in 11.04! I have an usb disk 40 Gb. And I was loading it with data real fast (svn). At once I could no more write, Read-only file system was reported. I reckon that problem from years ago on redhat, so I try to fix it. But It became worse. It was severe damaged. I created a new filesystem while the disk was out the usb-box and directly connected to de IDE. Started all over, and the error also. Tried to repair with no luck. It looks like the journal get overrun but I'm not sure. However I do think its reproducible. I did it 3 times now and now I am very sick of it. This is happening on a updated 10:10 to 11:04 system, a few weeks ago.
View 3 Replies View RelatedBy mistake I formatted an ext3 partition on my external hard-drive. Now it has turned into a vfat filesystem. Is their any chance of recovering the lost data?
View 4 Replies View Related
