I've got the Gnome front end installed and everything runs terribly slow. Now that I think about it, I'm not sure if its a problem with sdlmame or the Gnome front end.Is anyone successfully running MAME under FC14? If so, what did you have to do? Did you have a similar experience to mine? How did you correct it?
View 2 RepliesWhenever I insert a USB drive (or plug in my Motorola Droid to copy files to it), a window pops up that says 'Unable to Mount File System'. Not Authorized. The drive shows up under the Places menu, but if I click on it I just keep getting the same error.
View 14 Replies View RelatedI am running sdlmame on my Aspire Revo, Everything is generally hunkey dorey & sound is perfect.However, when the processor gets a bit bogged down I sometimes suddenly get loud static through my speakers for a second or two before it reverts back to normal. Sometimes I lose it completely and just get constant static, although the game continues to play normally. Very occasionally the sound will recover, but normally that's it and I have to quit the game.
Pausing the game pauses the static but does not recover the sound (static continues when game continues).Setting mame to mix at a lower rate results in lower quality static, so it seems to be a problem with mame itself rather than my ALSA setup (I upmix everything to 48000Hz due to using digital out).Fiddling with mame's buffer length settings seems to make no difference.If I increase frameskip, then it decreases the likelyhood of static, but it's frustrating that I know the game can be driven at fullspeed. Sometimes I have to slow it down dramatically to completely guarantee non static.mame is the only app I have this problem with. All other sdl apps work fine, including other emulators.Anyone come across this before? It's really annoying when I'm playing Afterburner on my 60" plasma and 5.1 setup, and then I'm suddenly deafened by static. It's killing my perfect setup.
I think there is a bug with gmixer on fc14 using lxde. Every time I log out and log back on gmixer spawns another process. So if I log out and log back on 6 times I will have 6 gmixer processes running concurrently.
View 3 Replies View RelatedI just wanted to know if having my laptop set to ondemand, will this affect performance in any way? I realize it increases the clock speed to performance when the CPU is under load, but does the time it take to go from ondemand to performance affect speed? Will there be any noticeable difference between the two setups? I have a dual core intel at 2.2GHz when in performance. When ondemand is set with no load it downclocks to 800Mhz.
View 7 Replies View Relatedati proprietry fglrx driver in fedora 14, anyone know if this exists or where to get it? or is there some other way to get some 3d acceleration on fedora 14 with out it?
View 6 Replies View RelatedI am new to this O/S. I have tried Mint and Ubuntu. There are some problems I would like to work out by myself before I take short-cuts, as if.I have tried to install codecs for my o/s media player and get a reply from computer "xxxx does not have sudoer rights, you will be reported."I tried to get sudoer rights and was told I had to have administrator rights first. To get administrator rights I needed sudoer rights. I decided to come to forums to ask and this is my first post.
Is there a danger in getting administrative rights? If so, I would still rather like to face the danger than not be able to play music. And how do I get real superuser rights? My root account is localhost.localdomain and my login account is XXXX. I would have access to everything rather than have a warning that the administration is receiving reports of my activity. Might anyone have help?
I'd like to update my version of gsl to 1.15 (it has improved integration routines) Downloading & compiling worked, but I'm hesitant to overwrite the default packages with ones I compiled myself since there's a lot of compilation flags etc I may be getting wrong. On top of that, I need the header files from gsl-devel too to link against, and I'm not sure how that works. (Where to place them etc)Is there any way to use these packages to install on fc14?Should I just compile it myself?And what about the devel headers?
View 2 Replies View RelatedI have some problems reading dvds using either xine or totem
Here's the output from running xine dvd://
This is xine (X11 gui) - a free video player v0.99.6.
(c) 2000-2007 The xine Team.
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdread: Attempting to use device /dev/mapper/vg_inga-lv_root mounted on / for CSS authentication
[Code]....
I know that this issue has been addressed on the forum before, but I haven't found any threads that solves my problem.
when compiling stlplus (02-08), FC14, i am getting these errors:
[Code]....
Just trying my first live upgrade but hit an issue with not being able to import the GPG key for FC14:
[root@jahama ~]# rpm --import https://fedoraproject.org/static/97A1071F.txt error: https://fedoraproject.org/static/97A1071F.txt: import failed. I downloaded the key to a file and had the same error so I know I haven't mistyped anything. What have I missed and what can I do to resolve it?
I tried installing VMWare-player using
Code:
#./VMware-Player-3.1.2-301548.i386.bundle
It got installed successfully, but while running it said gcc not found. so i installed gcc by
Code:
#yum install gcc
[Code]....
after upgrading to FC14, i'm getting this when I run emacs file.sh:
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL)
Fatal error (6)Aborted (core dumped) This only happen when i'm logged in as root, on the Terminal session. As a regular user, or launching emacs from task bar icon don't happen.
Is this howto which is based on FC5 still applicable to FC14?[URL]...
View 2 Replies View RelatedWhenever I resume my laptop, there is no audio... the only way to make it work is to restart my comp ...I am using fedora 14 on Thinkpad x201 .
View 1 Replies View RelatedI have coriander-2.0.0-1.fc14.i686 installed and it does n t work anymore as it used to with my IIDC compliant ieee1394 camera.
I understood that raw1394 and video1394 modules are now deprecated. So firewire_ohci and firewire_core are loaded when I plug in the camera. There is no more /dev/raw1394 and /dev/video-0 streams, but now there are /dev/fw0 and /dev/fw1.
When I run Coriander, I receive: Erreur de segmentation (core dumped)
If I create the following link: ln -s /dev/fw1 /dev/raw1394
[Code]....
where you only get offered the kernel-headers for 2.6.35.11-83 by yum but not the kernel or the kernel-devel? I tried yum clean all and both pointing to the baseurl and mirrorlist and it does the same thing for both. Oddly my other laptop with F14 in the wireless cafe showed all three packages were available.
View 2 Replies View RelatedEver since I have upgraded form fc 11 to 14, I cannot login using the KDE desktop, I am forced to use gnome. The problem with that is that KDE apps are not running well, slow and often crashing, when I try to use them under gnome.
Symptoms.
1. Attempting to log in as any user with either KDE or KDE failsafe selected brings up the KDE splash screen, the hard drive icon, and occasionally the wrench icon.. a long pause and then back to the login screen.
2. I have these problem described in other Linux forums and have attempted to implement their recommendations
2.1 Deleted the .kde and other directories associated with KDE, reinstalled KDE.
2.2 Checked the permissions on all the requisite files and directories to ensure that they were good.
2.4 Looked through endless log files for ANY clues.. none
3. KDE applications, like ocular, take about a minute to start up, respond very slowly and eventually stop responding. Gnome applications work normally.
I have an old Compaq Evo P IV, with FC 14 installed. The light on the floppy drive is on all the time and there is no object for it. It has been this way since I installed, but I don't use floppies much (who does anymore), but now I have a need to edit a file on a floppy, for of all things, a Windows system (boot issue
View 5 Replies View RelatedI am using FC 14 on my laptop (Dell insprion 1525). When I installed vlc it worked nice, but about 2 weeks ago after updates, each time when I run vlc, after short time running (about 10 - 20 seconds). All system suspends (actually computer responds very lately).
View 14 Replies View RelatedI just changed the mobo and moved from Nvidia to ATI
VGA compatible controller: ATI Technologies Inc RS880 [Radeon HD 4250] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device d000
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at ee00 [size=256]
Memory at fdfe0000 (32-bit, non-prefetchable) [size=64K]
Memory at fde00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 3
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Kernel driver in use: fglrx_pci
Kernel modules: fglrx, radeon
If I try to run the livna tool, it asks for the root password, then nothing.
Running radeon-tool --debug
reading RADEON_DAC_CNTL (58) is internal error
I'd like to be able to change the display resolution.
I'm trying to install FC14 on my box... without any success so far
The problem: when it comes to write the partitioning scheme to the disk, the system freezes. This occurs with the following CD images:
- Fedora 14 LXDE live image. Installation using "Install to Disk" script.
- Fedora 14, regular i386 image
- Fedora 15 (beta) LXDE live image
I did further tests and found out that I could simply reproduce the problem by trying to write a partition on /dev/sdb using fdisk:
- after executing the fdisk 'w' command, the system hangs for about 10-15 seconds
- no kernel message can been seen during this time using dmesg
- after those 10-15s, the system freezes. I have no other option but power off the machine.
There is no Hardware problem with the disk itself. I can read/write partition on that disk without problem using another distro.
Does someone have a few ideas what to do?
I'm trying to get dial up working using wvdial, kppp or system-config-network. Whatever I try, it shows "no modem found." I'm using a US Robotics serial modem that's worked with other linux set-ups, so I know it's not the modem. What's the command to find a serial modem in the terminal? lspci doesn't show it.
And any info on getting any of these to work..especially system-config-network! Had it working with linux Mint's LXDE on an older Thinkpad, but something happened after an up date (kept saying that an IBM system was detected and refusing to load a module when it booted.) After update, didn't show that warning, perhaps loading the module.
Old Thinkpad hasn't loaded an operating system since! Won't even load gparted so I can get something else on it.....so I'm sticking with Fedora until I can figure it out. Got another old Thinkpad, don't want to repeat the same mistake. Guessing that it's a debian problem, as Mint's never broken anything before.
I have used preupgrade to moved from fc14 to fc15. With fc14 I had my two usb 3.0 ports working. However, with fc15 my usb 3.0 ports are disabled. I have read the instruction at the common fc15 bugs doc and removed the kernel parameter xhci.enable=1 and also erased the file /etc/pm/config.d/xhci. Still the usb 3.0 ports are not working. I am using kernel 2.6.38.6-26.rc1.fc15.x86_64. I cannot use the 2.6.38.6-27.fc15.x86_64 since there no nvidia drivers for it.
View 5 Replies View RelatedHow to re-install open office when open office stops working... I installed open opeen office from the offical site of openoffice via their tar file. On extraction of the tar file a OOO--- folder is created. On running the ./setup option in this folder OpenOffice got neatly and easily installed. However once when I re-installed/repaired fedora14 on my system due to some other issues Open office stopped working on my machine. Here is how I resolved this..
Login as root and then select all the commands (copy) and paste it in the terminal. Please note that there should be a blank line at the end of the select to ensure that the last command also gets executed. Then go to the OO---- folder and run ./setup again. It will work...I spent about 3 hours coming up with this solution. I was searching and searching for re-installation and with some tips from the other posts on various sites I came up with this solution. The packages that had to be deleted were found with the rpm -qa openoffice* and rpm -qa ooo* commands.
[Code]....
I am trying to disable my cdrom in fc14 but am unable to do it. In the earlier versions there was a folder /lib/modules./..../kernels/cdrom/ which had the ko files that could be renamed. However I am not seeing any such folder in fc14. how to disable my cdrom?
View 4 Replies View RelatedI have just upgraded my Lenovo T61 from FC14 to FC15. Under FC14, I had the system set up to hibernate when the lid was closed. When I opened the lid, the system would automatically come out of hibernation in just a few seconds and I would be back to where I was.
Under FC15, I have also set it to hibernate when the lid closes. When I open the lid, nothing happens until I tap the power button, and then it comes out of hibernation via some kind of reboot: I see the Lenovo splash screen, then the machine beeps and goes into a wakeup routine, which takes much longer than it did under FC14.
I want to install nokia software under linux, but i can't find any software about nokia .. some one can give me some advice about this?
View 5 Replies View RelatedI installed FC14. But when i create a VPN connection using NetworkManager, 10 seconds after VPN connection was established, vpn connection has been disconnected.In FC13, I didn't have this problem. In FC14, i use same settings used in FC13.
View 2 Replies View RelatedIs it just me or does a page full of animated GIFs act funny on Fedora 14?
Example: [url]
Half the emoticons like to flash and disappear and things, even right clicking one and doing "view image" links to a gif that keeps disappearing and flickering. But when saved and viewed in another program (aMSN for instance) the GIF is fine.