Fedora :: F11 Taking 2+minutes To Boot
Aug 21, 2009
I have f11 installed on as a vm on virtualbox 3.0.4. It takes forever to boot. I modified /etc/udev/udev.conf and changed udev_log="info" to udev_log="debug" and rebooted the system. When the progress bars came up I hit Esc and watched the boot process. Udev runs through approximately 7-800 items before it ever tries to load anything else. Is there a way that I can change this? I have been through the forums and can't find anything similar to this. I thought maybe that it was the "Floppy" issue so I went ahead and blacklisted the floppy drive (as this is a vm I don't have access to the BIOS) anyway.
View 2 Replies
ADVERTISEMENT
Jan 25, 2011
I have ubuntu 10.10 installedWhen it was new It was too speedy in starting upbut, Now It is taking about two to three minutes to getting started.I tried to remove some applications from System/Preferences/Startup Applications,But no differenceI want to speed my systemIt has no problem in speed after starting up
View 14 Replies
View Related
Mar 18, 2010
I have just installed Ubuntu for the first time using a USB drive and everything went fine during installation. However now during the boot phase I see 10 or so lines of
[14.24024] ata5: COMRESET failed (error=-16)
The numbers prior to COMRESET change with each line but the rest remains the same. I am extremely new to Ubuntu or Linux for that matter as this boot process is also taking about 3-4 or even 5minutes as it slowly cycles through each error. Once 10 or so lines have popped up the computer finishes starting and I can log in fine and everything.
View 1 Replies
View Related
Aug 21, 2015
I am using Debian sid 4.1.3-1 and when i shutdown the system it takes 3 - 5 minutes before actually shutdown, there is only a black screen until the hdd led start flashing and after that the system finally shutdown. The weird part is that sometimes it happen in less than 30 seconds , how can i figure out where the problem is ?
View 8 Replies
View Related
Jun 13, 2009
Anybody notice a slowdown in their boot times? I have had F11 (64 bit) running for about three days and it is taking twice as long to boot as when I first installed. I have not done much other than configure my wireless printer and change a few icons. I have Compiz cube effects running but I did that right away and it made no difference in my system speed. If anything I thought I should be booting faster after disabling a few things in the start up menu that I dont need.
I went from about a 30 second total boot to almost a minute to the login screen
top - 15:13:37 up 11 min, 2 users, load average: 0.35, 0.24, 0.12
Tasks: 150 total, 1 running, 149 sleeping, 0 stopped, 0 zombie
Cpu(s): 0.8%us, 1.1%sy, 0.0%ni, 98.1%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3062244k total, 523208k used, 2539036k free, 31580k buffers
Swap: 5111800k total, 0k used, 5111800k free, 206328k cached
View 5 Replies
View Related
Aug 21, 2011
I just want to find out if anybody else is having a similar issue before I start trying to disable services one by one. When I boot in to F15, everything runs fine up to were it starts loading the CUPS module then it hangs for about 2 to 3 minutes, the next thing to load is Samba shares. So it could be either of these or it could have nothing to do with them. Just to add that I made 100% sure that all my samba shares mount fine and are online and have no shares mounting in my fstab file.
View 2 Replies
View Related
Jan 5, 2010
I just installed fedora 12 on my new harddrive, and it's booting up extremely slow (but once I'm logged into the system, it all seems to run fine). Right now my set-up looks like this: 1TB HD: new install of fedora 12 300GB HD: Windows xp & my previous install of fedora 12
My previous installation of fedora 12 never booted this slow until after I installed Fedora 12 on my new HD. It seems to freeze right before the log in screen, and after I log in, both installations take about a minute to get to a usable desktop. I pressed the Esc key during startup to see if anything was wrong, and it didn't hang up on anything. However, as it was loading the login screen (where it first begins to get sluggish), I was kicked out of the terminal view and forced to wait in the gui for log in.
View 5 Replies
View Related
Oct 25, 2010
After Gnome logon it may hangs in any moment (window scroll, app start, opening url)
If sound was playing in that moment it continuously repeats last sample (about 1 second length), but do not respond to mouse move/click or keyboard. If to let it stay in this state nothing change - sound sample still repeats and no response to input. I need to reboot it by reset button. Sometime when I press reset nothing happen then after couple of seconds computer turns off, after 1-2 sec on and then starts booting.
During first 15-20 minutes after booting it may hangs multiple times but after that it works without problems.
Tried do not logon 20 minutes after boot - do not help, it hangs anyway. Only helps logon and do nothing for awhile.
This behavior have started after F12 installation. F13 installation changed nothing, only F11 worked perfectly.
View 5 Replies
View Related
Jun 22, 2009
Machine Specs: Asus P5B Deluxe w/ Intel Core 2 Duo E8400, 8gigs of ram and an Asus GeForce 8400 GS. I downloaded and installed the x86_64 DVD Installation disc for Fedora 11 the day of the release. I allowed the installer to utilize 100% of the disk with the default partition configuration. I only installed KDE.
Upon first boot the machine didn't boot in under 20 seconds, but it wasn't slow enough to give it any though. Once logged in, everything ran great. The system has been running great since the launch date. I rebooted once or twice since them and thought the same thing as the first boot, not particularly fast, but not slow enough to care.
This morning I rebooted and it almost seemed broken. It takes about 20 minutes to get past the loading bar, and way too much time to log in. When the loading bar is going I hit escape. It looked like "Starting system message bus" took the longest, but it wasn't the only slow thing. After some more time, the background for the log in prompt appeared. Once the log in prompt fully appeared I mistyped my password. It took a good four minutes to authenticate unsuccessfully. I reentered my information correctly. It took another four minutes for the prompt to disappear, then it continued to load very slowly.
View 12 Replies
View Related
Sep 27, 2009
Hardware: Toshiba NB200 with Atom 280 & 2GB, 160 GB HD Everything works great except the boot time. My default boot is F11 & when the system starts in "yuk" Windows it only takes a few seconds! but when I start in F11 it takes 15 - 20 minutes for it to start. No error messages, nothing in dmesg, standard configuration. The same system with Win XP & F10 worked fine?
View 4 Replies
View Related
Apr 15, 2010
So my Dell latitude E6400 running fedora 12 (2.6.32.11-99.fc12.i686.PAE) is usually connected to a big screen (1920x1200).
Now each time I boot, X becomes unresponsive shortly before or after login for a couple of minutes, and then goes back to normal. This happens both with and without connection to the big screen.
The error messages associated to this seem to be like this, my /var/log/Xorg.0.log is cluttered with them :
Code:
I normally start my computer in the morning, walk off for some tea, and come back when X is functioning, but when I'm in a hurry it's pretty, or very, annoying ... drinking tea / coffee to wait for a computer to start is something people did in the 90s, it shouldn't be default behaviour in 2010 ...
View 11 Replies
View Related
Nov 7, 2010
My ubuntu(10.10) installation takes a relatively longer time (90 seconds) to boot. I think part of the problem might be related to an error message during boot related to usb drivers.
Code:
[2.717076] usb 4-1: new low speed USB device using ohci_hcd and address 2
[3.244051] usb 4-2: new full speed USB device using ohci_hcd and address 3
[12.029046] /build/buildd/linux-2.6.35/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
I have attached the relevant part of dmesg output also.
View 6 Replies
View Related
Mar 15, 2011
I'm using mencoder to capture audio from a Encore ENLTV-FM3 video capture device. I have recently noticed that, since one week ago, when the machine was forcibly restarted due to a power outage, all recordings are slightly pitched, they play back slower than they should.
I narrowed down the problem to the following command line:
$ time mencoder -really-quiet -tv driver=v4l2:device=/dev/video1:chanlist=us-cable:audiorate=32000:alsa:adevice=hw.1:input=0:amode=1:normid=11 -endpos 00:10:00 -ovc copy -oac pcm -of rawaudio -o test-32000.wav tv://69
real 9m54.886s
user 0m5.536s
sys 0m1.740s
$ ls -l test-32000.wav
-rw-r--r--@ 1 martin martin 76800000 Mar 15 17:20 test-32000.wav
Somehow, mencode managed to gather precisely 10 minutes worth of raw audio in 9m 55s. That's not physically possible, unless the capture device's A/D converters are "overclocked". I can't think of any other explanation besides hardware failure. Can that be? Could it be that something got burnt during the power outage and now the capture device's internal clock went nuts?
Since the machine's restart, I've also noticed dmesg is flooded with entries like this:
CE: hpet increased min_delta_ns to XXX nsec
Which seem to indicate that the computer's high precision event timer is somehow out of sync. Does this have to do with the audio issue? Can it be that the audio converter's sample rate is linked to the HPET? I'm totally lost here. Has anyone bumped into something similar?
View 2 Replies
View Related
Oct 3, 2010
When booting up eb4 distro (eebuntu)mouse pointer although active during start-up disappears when gnome is started for 5-10 minutes, sometimes longer. Gnome failsafe it will appear but I can not identify the fault.
View 1 Replies
View Related
Jan 25, 2011
It's been a while since this problem started. I have an Acer Aspire 4720z laptop with Ubuntu 10.10 installed. My laptop takes a whole damn 1.5 minutes to boot up and login (measured according to bootchart; I have auto-login enabled) (The majority of this 1.5 minutes is taken up after boot up, so it might indicate a problem with Xorg.)I don't know whether this is relevant, but when I boot up, a message gets displayed: "ata4.01: failed to resume link (SControl 0)". Also, this problem started right around the time I upgraded from Lucid to Maverick, so it could be some problem with my upgrade.find the source of this issue.ATTACHED: bootchart image from last login.boot.log:
Code:
fsck from util-linux-ng 2.17.2
udevd[370]: can not read '/etc/udev/rules.d/z80_user.rules'
[code]....
View 5 Replies
View Related
Aug 4, 2010
Every time I boot up OpenSUSE 11.3 it hangs at the same "position" for approximately 3 minutes and then continues to boot. Unfortunately I see no corresponding error log e.g. in dmesg output. Hence, I don't know what is the reason for that. Here is my dmesg output. The delay occurs at 20 seconds after beginning of boot process (line 1085). I also analyzed the boot process with bootchart.
My computer: Notebook Lenovo ThinkPad R400.
View 9 Replies
View Related
May 21, 2010
I have recently completed a fresh install of 10.4 LTS which installed without a hitch. But I have noticed that since I have moved to Lucid on my T43 the hard drive light is constant for at least 20 mins after each boot. Everything seems to run ok albeit during this time apps take a little longer to open as the HD is busy doing some thing...I just don't know what! BTW I am running the Gnome desktop and its a fairly vanilla install.
This didn't happen in the previous Ubuntu version I had installed on here for several months prior.
Does any one have any ideas what this may be or how I could find out what it is that is using the HD for this length of time on boot.
View 8 Replies
View Related
Oct 13, 2010
This is kind of cross post from the 10.10 beta forum, but since that thread went by without a solution, forum (and thread) are locked and this problem still exists, I'll try again.
When I reboot my machine, it seems to go pretty quickly. However looking at the log it seems that most everything is running after about 8.6 seconds, and then USB starts loading up. The first log entry regarding USB comes at 32 seconds, second one at 62 seconds. The keyboard starts working at 84 seconds and the mouse at 166 seconds.
Note, this same system was running 9.10, 10.4 and various other distros I tested without such problems...
I've removed all hubs, everything is directly connected to the computer. code...
View 2 Replies
View Related
Oct 18, 2010
I have a Dell Vostro 200. Have been running Ubuntu on it for 18 months - no probs. Recently it became very slow to boot. 5-10 minutes before Ubuntu startup screen appears. Have installed Ubuntu 10.10 (on a reformatted hard drive) today. No change. It's fairly certain to be a hardware problem but I don't know where to start.
View 3 Replies
View Related
Sep 1, 2010
I have a troubling issue. I log into Linux Mint 9 (fully up-to-date) on my Samsung Q320 laptop with power connected and after a few minutes it seems like the entire X session dies, I am logged out, all processes are killed and I am presented with the normal GDM login screen. When I first installed Linux Mint, this never happened. I have the NVidia closed-source driver installed and when the system logs me out, it immediately restarts X loading the NVidia driver which flashes the logo on screen. This all happens instantaneously, so it is not a reboot of the machine, just a restart of the display manager it seems.
There does not seem to be any cause for this. I have disabled all screen saver and power management settings that may lead my system to auto-logout of Gnome. The system log doesn't indicate anything unusual happening. Confused about where to to take it from here bar and fresh install of the OS. Perhaps there are some X11 logs I should be checking.
Update: Moved to Ubuntu 10.10 and its recommended NVidia driver and have not experienced this problem since.
View 1 Replies
View Related
Nov 13, 2010
I have a little problem here. I tried to copy include directory from g++ to a place where it suppose to be and when i couldn't because of the rights i wrote something like this in the bash:
Code:
Code:
cause i hate when I can't do what I want without tiping command
After few minutes all daemons crashed and now I can't boot normally
in console i've tried
Code:
And that stopped on /prc/756 directory
Well now i can boot normally but most of programs are not working, i can't get to the internet? and it looks like there is no way to become a root cause there is no sudo/
Can i reinstall ubuntu and keep all packages and files on its places?
View 9 Replies
View Related
Feb 5, 2011
My configuration is as Follows:
Intel Pentium Dual core 2.6 Ghz
4 GB DDR2 Apacar 800 Mhz RAM
Gigabyte ATI Radeon 5450 HD GPU
I'm using Fedora 14 KDE but on startup it uses 40% of my processor. I'm using the proprietary 10.12 AMD ATI Linux Driver. I'm only using blur and woobly windows effect and I'm using OpenGL. Kubuntu/Suse never gave me this trouble. Even GNOME doesn't only KDE and fedora 14 is troubling me.
View 1 Replies
View Related
Jan 21, 2010
After fixing network issue (change to vanilla kernel) and configuring alsa sound drivers, I realise that I may be spending some time doing some more config before putting my machine to hardcore use!
So, is it possible or can anyone recommend a program that can do an image of the hdd which I can save on an external drive and install/reinstall it on hard drive if i ever need to?
View 1 Replies
View Related
May 29, 2010
i have changed the cachedir for yum because i don't have enough space left for updates (500MB free on /). i got the "Insufficient space in download directory" error msg.so i've changed the chachedir in /etc/yum.conf like this:cachedir=/media/OS/.temp/var/cache/yum/$basearch/$releaseveros is another partition on my hdd with 17GB free spacewhen i tried to update after this i got the error msg again"Insufficient space in download directory /media/OS/.temp/var/cache/yum/i386/12/updates/packages"it seems like yum is still using /var/cache for downloading and not /media/os/.tempi have double checked with df and yum it's still using /var/cache
View 14 Replies
View Related
May 28, 2011
I switched to Fedora from Ubuntu about a month ago, and I've been very happy so far. But today I started the upgrade to Fedora 15, and something isn't right. I used the preupgrade method, and the package download took a respectable 30-40 minutes, then I was prompted to reboot my machine. I did so, about 4 hours ago. It took about 2 hours to get to the point where it says it's installing the packages, and 2 hours to get to where it is as I write this, at 116 completed packages out of 1634.
I'm pretty sure this isn't normal for ANY distribution. The machine itself is about 6 months old, so I'm pretty sure it's not a hardware issue. I'm considering interrupting the upgrade and doing a clean install, but I was wondering, is there anything I can do before resorting to the clean install option?
View 7 Replies
View Related
Jan 26, 2010
I am getting an error after the self boot sequence when after X minutes the system auto boots the highlighted option in my case it is mint 7 after that screen an error comes up with Random numbers and letters then Stuck?
View 1 Replies
View Related
Jul 6, 2009
I have the following network/server configuration:
[Code]....
How do I prevent eth1 from being able to overwrite the default gateway that eth0 has already set?!? I read that one can create route-* files in the /etc/sysconfig/network-scripts/ directory to setup static default routes.But those seems to require one to know the IP address of the gateway, but in my case the ISP's gateway is served via DHCP and so it could vary from day to day. Here are the contents of some of the relevant files:
[code]...
View 2 Replies
View Related
Sep 15, 2009
I have and IBM e-Server, with 256RAM, however when I force the fedora installation to be perfomr in grapgical mode, Anaconda return a message that say that I dont have enoght Memory to perform the graphical installation. To my uderstanding It requiere 192MB of Memeory for a graphical installation.
What I'm doing wrong?, or is that the vmlinuz is booting into RAM and taking most of the space?
View 1 Replies
View Related
Jul 14, 2010
I am using Opera 10.60 browser for the past one month. Generally it use to take about 20 seconds to startup but since yesterday its taking more than 40. I don't know about the exact duration but certainly its taking a lot of time now.
View 3 Replies
View Related
Aug 16, 2011
I tried to update fedora 15 and it took too long , even the cleaing of packages took too long At the end of the update got the status cleaning up packages that took even longer than the whole update.
View 3 Replies
View Related
