Ubuntu :: Tried To Copy Include Directory From G++ - After Few Minutes All Daemons Crashed - Now Can't Boot Normally
Nov 13, 2010
I have a little problem here. I tried to copy include directory from g++ to a place where it suppose to be and when i couldn't because of the rights i wrote something like this in the bash:
Code:
Code:
cause i hate when I can't do what I want without tiping command
After few minutes all daemons crashed and now I can't boot normally
in console i've tried
Code:
And that stopped on /prc/756 directory
Well now i can boot normally but most of programs are not working, i can't get to the internet? and it looks like there is no way to become a root cause there is no sudo/
Can i reinstall ubuntu and keep all packages and files on its places?
View 9 Replies
ADVERTISEMENT
Oct 31, 2010
i just installed 11.3 from live cd--after a recent update basically wiped my whole 11.2 setup into oblivion...i want to say that i like 11.3 better, however, i have not had a chance to even use it.......after installation, and then updating and adding repos, i tried to install a couple programs through yast. on the three occasions of trying, the computer crashed--screen goes blank, the CAP/NUM lock lights flash on and off...i tried to install adobe reader from their site two times, and the same thing happened twice--screen goes blank, the CAP/NUM lock lights flash on and off.i'm just beginning to get my computer back in order, after my 11.2 died.and since installing 11.3, i can even begin to begin!
View 9 Replies
View Related
Sep 15, 2010
I am working on a Linux embedded C++ project. When I do an install, all of the header files are copied into the target at /usr/include/.My question is, why would the target ever need the C++ header files? It seems to me all the target needs is the executables and the library *.so files.I want to remove the installation of header files into the target but I'm afraid I'm missing something.
View 3 Replies
View Related
Feb 2, 2009
Just installed FC10. I edited the /etc/inittab to start FC at the command prompt. However, how can I change the boot so that I can see the daemons loading not just that graphical bar at the bottom of the screen.
View 3 Replies
View Related
May 17, 2010
I'm loging my slackware as a simple user After each reboot I need to start cupsd for my printer nfsd and mountd to export my shared directories I use init 4 for my desktop I would like these services to start always without the konsol and the command lines.
View 8 Replies
View Related
Feb 7, 2010
My system was working fine. I followed a thread online to try to get samba to share better, installed "winbind" and now I can't get passed "Checking System Files" on boot up.
Upon boot, "Checking System Files":
Starting Firestarter firewall .... fails.
Starting samba daemons _ .... Just hangs there forever
Is there a way to get back into my system so that I can uninstall winbind, firestarter, or samba if need be?
View 1 Replies
View Related
Mar 1, 2011
Today I was moving 25,000 files from my projects folder from a windows box to the linux box when I noticed it crapped out about 60% of the way done check the server console saw a crash report all over the screen so I hot the power button and rebooted server is back up no file loss so no problem but I thought I would report a problem with SAMBA and copying vast numbers of files is at issue after the restarting the server, samba still did not come up so I restated it and it is back up fine.
View 1 Replies
View Related
Dec 28, 2009
How to stop starting daemons at boot time? For example:rc.bluetooth
View 3 Replies
View Related
Oct 11, 2009
I have installed Koha on Debian Lenny. It does work well, but I have to manually start the koha-zebra-ctl.sh by entering /usr/share/koha/bin/koha-zebra-ctl.sh start The is, however, that this starts at boot from /etc/init.d/koha-zebra-daemon. Like /etc/init.d/koha-zebra-daemon start (does not work now) In the koha-zebra-daemon file I have:
#!/bin/sh
# Quick start-stop-daemon example, derived from Debian /etc/init.d/ssh
set -e
# Must be a valid filename
[code]....
I have made a symbolic link;
ln -s /usr/share/koha/bin/koha-zebra-ctl.sh /etc/init.d/koha-zebra-daemon
I have tried checking whether the symbolic link exists with readlink, but this never seems to return anything anywhere.
View 6 Replies
View Related
May 30, 2011
I have installed QT on Slackware 13.37 x64 and when I create gui project it works ok, but I need OpenGL.When I add #include <QGLWidget>I get error No such file or directory there is my env
Quote:
CPLUS_INCLUDE_PATH=/usr/lib/qt/include
MANPATH=/usr/local/man:/usr/man:/usr/lib/java/man:/usr/share/texmf/man
KDE_MULTIHEAD=false
HZ=100
[code].....
View 2 Replies
View Related
May 31, 2010
I tried to build the virtualbox 3.1.6 kernel using the files from slackbuilds.org and I got this error that says it cannot find the kernel include directory. My current kernel is 2.6.33.2 (slack 13.1).
I tried SOME_VAR=/usr/include --> (I forgot the exact variable name, but I used the variable name I saw in the error message) just a guess , but it didn't work of course.
Is it at /usr/src/linux-2.6.33.2/include or something like that? Or is there anything wrong with the slackbuild script?
View 4 Replies
View Related
Feb 19, 2010
I downloaded a mouse theme form gnome look and installed it in the themes. But it has not appeared in the pointer themes section in custimation even though it said that it is installed correctly.When I drag the file to install it again it says something along the lines of it cannot copy a directory over a directory.Where can I find where the mouse/pointer theme is located and delete it. I have searched filesystem, google and these forums and not had any luck yet.
View 1 Replies
View Related
Apr 13, 2010
Recently I have moved to F11. While I am trying to install directFB explicitly, I am getting error related to X 11 dependencies. It could find no includes files under the directory /usr/include/x11/. But x11 libraries are available in the system. I remember that, i had these x11 include files in my F9. Do I need to install any external packages to get the x11 include files in place?
View 4 Replies
View Related
Jul 15, 2011
I wasn't doing anything special on my computer (Ubuntu 11.04) when it just turned off. When I rebooted I was presented with BusyBox. I'm still pretty new to linux, but it appears that root is totally empty. Is there a way to view a log before the system crashed?
View 9 Replies
View Related
Aug 1, 2009
i want to copy a few files from my windows directory into the wine directory - its no big deal, just a few preference files so i dont have to set something up all over again. trouble is, i had the files copied, but i cant find the wine/ c: drive directory anywhere, anyone know where this can be found??
View 8 Replies
View Related
Jan 3, 2009
After i try to find logfiles follow date/month/year. i want copy this files to another directory with name's directory is time you find(date/month/year).
View 4 Replies
View Related
Mar 23, 2010
I'm facing a little trouble with copying a .txt file(only) from a directory and subdirectory to another directory. -R command don't work I think if I want to do this, since I don't want to copy subdirectory.
View 6 Replies
View Related
May 13, 2011
I am in my current directory. I want to copy a directory somewhere else into this current directory. Lets say I want to take it from direc1/direc2 and the directory I want to take is called demo.
Code:
That is what it shows in the man pages, but when I do that, it says cp: no match
View 5 Replies
View Related
Jul 11, 2010
What is the difference between /usr/local/include and /usr/include? When I compile my program, is both /usr/local/include and /usr/include avaliable? Can I copy a file from /usr/local/include to /usr/include?
View 1 Replies
View Related
Jul 8, 2010
I just downloaded the SDL source code. i did compile and make of this code.then i did make install. but i didnt see the files of SDL.h and lib.SDL.*** in /usr/include/ but later i found out that these files are placed in /usr/local/include and /usr/local/lib. how can i specifically install libraries on /usr/include and /usr/lib
View 2 Replies
View Related
Sep 1, 2010
I have a 160GB harddrive which I installed a F12, would like to upgrade to a bigger drive, but I hate to have to re-install everything.
Recommend a good disk copy utility? The utility should be able to not only copy files, but boot sector and everything. So I just need to make a copy, change my BIOS to boot from the new drive and run everything as before.
View 11 Replies
View Related
Jan 16, 2010
I have just replaced my decaying XP OS with Ubuntu just yesterday evening. Everything has been fine until today at around noontime, where the OS just crashed. I have not been able to boot up the OS ever since, neither from the HD or the LiveDisc which I have installed from. I had updatemanager, that IM program (I'm new to the system, I don't know what its called and Firefox open at the time. I have 32 bit ubuntu installed on a 32 bit computer, unpartitioned HD
View 2 Replies
View Related
Jan 28, 2011
It happened to me again, I guess I need to ignore those updates but somehow I forget each time! This time it froze in middle of update no mouse no kybd no cap/num locks light nothing so I hard booted after an hour of wait, now I cannot boot at all. I go thru Grub menu then it says press S to skip and M to manually load. In most cases nothing works but I got to the prompt and put the root password but I dont have an IP address and cannot get 1? I did fsck -p but no errors. It says the OS is not on / or has been gone?
View 2 Replies
View Related
Mar 18, 2010
I am using my media server as my podcast collector. I am in the process of learning the ins and outs of NFS so i can mount a NFS directory and transfer my podcasts from server to player. For now i am using scp to transfer podcasts from server to desktop then to player. The problem is the path to the directory of one of the podcasts is /home/user/gpodder-downloads/The BILL&TIMMY Show Podcast.
whenever i try and run my scp command it fails because it thinks that TIMMY is a script i want to run in the background. I have tried to back-slash escape the character, i've tried single quoting and double quoting the character and i still get the same problem. as it sits now i have to move all podcasts to another directory and then transfer them to my desktop...but i would like to transfer the podcasts without un-necessary steps.
View 8 Replies
View Related
Jan 30, 2011
I want to do the following.
1. have a directory full of subdirectory
2. Pick the first file from every sub and copy that to the main directory and also rename that file to the same name as the subdirectory's name
3. need to work in commandline best is a simple script.
View 4 Replies
View Related
Sep 1, 2011
I am writing this from a LiveDVD of 11.04. My machine, which is an Inspiron1501 with AMD64 dualcore crashed while running a working copy of 10.04LTS 32bit. At first Harddrived seemed unrecoverable, but not that may not be the case if I can mount it. HD is partitioned as 1 FAT which holds the OEM installer1 NTFS with a sub/ virtual NTFS (not as a file, but as a "partition", only readable from WinXX) 1 Linux Swap 1 Linux Extention 3 (I believe it is 3, as in EXT FS 3) Machine initially displayed:
Code:
[ 2.736258] Console: switching to colour frame buffer device 160x50
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
After following some advice, I booted into Win and shutdown cleanly. Which has made the machine only say this on boot:
Code:
No init found. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)_
Now, to make things a little more complicated, my home directory is encrypted. Could I just copy that over to a new install provided I can get it to mount?
View 3 Replies
View Related
Jul 15, 2010
I have just downloaded version 10.04 for my laptop as the previous version (9.?) stopped the internal fan from working. As it was installing the laptop got too hot and turned itself off. I have tryed to reboot but it won't.
View 4 Replies
View Related
Oct 14, 2010
I was upgrading from 10.04 to 10.10 and the computer completely froze and I restarted it thinking I would be able to restart the update where I left off (I'm new to ubuntu). However when I restart I can't get anywhere, if I boot normally the ubuntu screen comes up and then it stops with the computer name in the middle of the screen and thats it (can't do anything i can't get into shell via ctrl-alt-f1 etc..) if i use the recovery from the grub menu it loads a bunch of things then stops i can't type anything but I can switch using ctrl-alt-f1 and ctrl-alt-f7 but I don't see anything except:
under ctrl-alt-f1 the last line reads:
[2.711773] composite sync not supported
under ctrl-alt-f7: the last lines read
fsck from util-linux-ng 2.17.2
init: udevtrigger main process (421) terminated with status 1
[code]....
View 6 Replies
View Related
Oct 16, 2010
My filesystem crashed/corrupted. When i start my machine i see the following messageTarget filesystem doesn't have /sbin/init.No init fount. Try passing init= bootarg.BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built in shell (ash)Enter 'help' for a list of build in commandsAfter googleing, found that i need ti run fsck on my partition (/dev/sda5)I used a Livecd and logged in the single user mode and tryedfsck /dev/sda5But i get fsck.ext4: Device or source busy while trying to open /dev/sda5Filesystem mounted or opened exclusively by another program?When i do lsof | grep sda5I see
jbd2/sda5 594 root cwd dir 0,17 280 2/
jbd2/sda5 594 root rtd dir 0,17 280 2/
jbd2/sda5 594 root txt unkown /proc/594/exe
[code]....
View 4 Replies
View Related
Feb 12, 2011
today my desktop crashed due to power failure. When i again started the machine and tried to boot Ubuntu i m getting the following message in command screen:- "Minimal BASH-Like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists is possible device & file completions."
View 7 Replies
View Related
