General :: Getting The Package Name That Contains A Library - Error "No Package Gthread-2.0 Not Found"
Jan 22, 2011
Fedora 14 I recently went to install some software using the source files. When I ran the command ./configure I got a message saying that No package gthread-2.0 not found After searching the internet some one had the same problem. I needed to install a package called glib2-devel However, rather that searching the internet. Is there any yum command that can give me that information?
Today I was using Gchempaint (part of Gnome Chemistry Tools) and found that the F12 version fails miserably to correctly export H to xyz. So I decided to install the latest version I found (0.11). There are, however, some problems I must sort out during compilation.
Apparently it does not see my 'cairo' installation and so I get the following error message:
Code:
checking for cairo... configure: error: Package requirements (cairo >= 1.6.0) were not met: No package 'cairo' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.Alternatively, you may set the environment variables cairo_CFLAGS and cairo_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I'm trying to compile mesa from git sources, and I get this error:
Code:
checking for LIBDRM_RADEON... no checking expat.h usability... yes checking expat.h presence... yes checking for expat.h... yes checking for XML_ParserCreate in -lexpat... yes checking for INTEL... no
configure: error: Package requirements (libdrm_intel >= 2.4.21) were not met:
No package 'libdrm_intel' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables INTEL_CFLAGS and INTEL_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details I have an nvidia card, and had only built the nouveau drivers in libdrm-git. Now it seems mesa has an added requirement for the intel drivers. Also, mesa-git git ignores many compile options that I pass to it.
When I try to rpm --resign a package I get file not found error. Its not misstyping its not doing any gpg stuff and it does not ask for passphrase.I then rpmbuild -ba --sign X.specIt makes all the files and dies right where it signs the filesWhy i know its the .rpmmacros it never asks for a passphrase!If I build without --sign it builds 100% and exits normally.
I want to build a package from source using src2pkg, but I don't know how to avoid library miss match. Suppose I have Firefox 3.5.2 on Slackware 13.0 64 and I want to upgrade it to 3.6.2. Last time when I venturesomely installed Firefox-3.6.2-current into my Slackware 13.0, I got library miss match. Thus, instead of upgrading the whole packages to current (which is impractical and cumbersome), I want to build 3.6.2 from source. How can I do this? Is there any guideline how to use src2pkg? Or should I rather use makepkg? Do I need to create a Makefile?
Anyone recompiled Empathy on Fedora? I have problem of configure and make as following:
checking for LIBEMPATHY... configure: error: Package requirements ( glib-2.0 >= 2.16.0 gobject-2.0 gio-2.0 >= 2.16.0 gio-unix-2.0 >= 2.16.0 libxml-2.0 telepathy-glib >= 0.7.31 libmissioncontrol >= 4.61 telepathy-farsight farsight2-0.10 gstreamer-0.10 ) were not met: No package 'telepathy-glib' found No package 'libmissioncontrol' found No package 'telepathy-farsight' found No package 'farsight2-0.10' found No package 'gstreamer-0.10' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBEMPATHY_CFLAGS and LIBEMPATHY_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
I need to get the libstdc++.so.5 library ( on a computer with Fedora 8 and don't wonder why it's so ancient,-there is a good reason for it) but I don't have Internet access from that computer, so I can't get to the online repo's.
However, I do still have the installation disk, and I'm typing this from a computer (SuSE 10) that is half a meter from the Fedora box.
I tried the "ADD/REMOVE Software" option on the menu, but it keeps on looking for the online repo and then if it doesn't get it, it fails.
Is it possible to get this library from the installation disk. How? Could I download the single package from the online repo onto the SuSE machine and then move it to the Fedora machine? How do I then tell the Fedora machine to "incorporate" it.
I am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
I am trying to install kcachegrind and during the ./configure phase I got the following error: Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following: ./configure --with-qt-includes=/usr/lib64/qt4/include but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
I installed ubuntu server and got it set up, and im trying to install shorewall as a firewall, but whenever i do sudo apt-get install shorewall i get a package not found error.
I am trying to install wine in ubuntu 8.04. While installation getting the error 'No suitable package flex found'. I tried to find out flex package in adobe as well as other sites. unable to find out.
I tried to compile one software. After I typed "./configure", there is an error:error: GSL CBLAS library not foundI installed GSL 1.9 library --- When I was installing, it was like this:
make install Making install in gsl make[1]: Entering directory `myDir/gsl-1.9/gsl'
I'm trying to install Gnomad and have got this far. I type ./configure and everything looks like its kinda working then it says
"No package 'glib-2.0' found No package 'gthread-2.0' found No package 'libnjb' found No package 'gtk+-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables GN_CFLAGS and GN_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details."
using squeeze and trying to install asterisk on it. after entering the ./configure command this error appears configure: error: *** termcap support not found (on modern systems, this typically means the ncurses development package is missing) i've tried to find the soultion in google, but i couldn't.
I'm using a new Distro and after installing it and randomly searching for help on websites on how to install a .Deb file using dpkg at the konsole/terminal it says Bash : dpkg: Command not found . how is this possible ? Do I have to know about all the packages in the package manager to install this. slight difference for me ... knowing what I have and knowing if I need Apr93-323? (whatever) installed first or not ? The only thing I know is that I have the Iso image installed ... which is my linux distro . Where to go from here? because I usually go to a website site to find Software to install ...if I need it .back to the basics
Is there anyway to show package size that comes up in the search so you don't have to apt-get install package individually and wait for the installation initiation and then reject to install after it gives u the [y/N] confirmation thing?
I want to install kernel package by this command sudo apt-get install kernel-packagebut it gives me the error :Package kernel-package has no installation candidate
today opensuse 11.4 introduce Firefox 5 update to me (my current version is ff4) but when i click on "apply" to install it, the following error report appeared: a package dependency could not be found, Details: patch:firefox50-upgrade-4806.noarch conflicts with MozillaFirefox-branding-openSUSE.i586 < 5.0-.3.1 provided by MozillaFirefox-branding-openSUSE-5.0-2.1.i586
I'm looking for a package that will allow me to keep all my bookmarks in a library that I can access from any browser that I use such as FireFox, Chrome etc.
I am currently having an application package which provides some applications.however API's for the same will be provided by third party.Currently i am using a dummy functions in my code.Now i have a release by the third party for the first Api version.They have given a set of .so libraries.How do i integrate this with my application?Also i need an idea in general to how to go ahead with programming in such a development scenario where in it is distribued?
I'm trying to execute the following command: apt-get install linux-headers-`uname -r` mercurial build-essential cvs subversion libncurses5-dev
I get the following error:Package libncurses5-dev is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, or is only available from another source
E: Package libncurses5-dev has no installation candidate
I am trying to compile binutils 2.15.92 package on RHEL 5.4, which is required with gcc 3.4.6 version. I have already installed gcc 3.4.6 on /opt/gcc.
I have given the --prefix as /opt/binutils during compilation. I have all flex, bison and m4 packages installed.
I am getting following error during compilation..
Code: root/binutils/binutils-2.15.92.0.2/binutils/bucomm.c:425: warning: the use of `mktemp' is dangerous, better use `mkstemp' ar.o: In function `mri_emul': ar.c:(.text+0x9f2): undefined reference to `yyparse'
i have a problem in synpatic package manger(ubuntu 10.04)i get the following errorCode:E: Syntax error /etc/apt/apt.conf.d/11cache:2: Extra junk at end of file
i first noticed when i tried to get mono via sudo apt-get install mono i got the error
[Code]...
E: Package 'mono' has no installation candidate then i tried to get it through the software center and i noticed the software center wasn't opening.... so i tried searching to find if someone else had the proroblem, they did, one solution was to reinstall python but if i open syapitic software i get the error
This is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
I have just started using the zsh shell to see what its like and so far I like it. However one anoyance is that if I type: Code: sudo apt-get install plymouth-* I get package not found. If I do the same in a bash shell I get the option to install the the packages matching the wildcard.
