Code:
ali@localhost ~]$ k3d
ERROR: Exception loading options: no element found line: 1 column: 0
WARNING: Resetting options data to version 4
(k3d:12030): GdkGLExt-WARNING **: cannot load PangoFont
Segmentation fault (core dumped)
I had installed koha 3.0.0 successfully.I am able to import data by using Marc Editor but i am not able to edit the data of ITEMSit shows the following errorThe following fatal error has occurred:found MARCXML element datafield, but the <record> wrapper is missing at /usr/lib/perl5/site_perl/5.12.3/MARC/File/XML.pm line 452ApacheServer version: Apache/2.2.17 (Linux/SUSE) Server built: 2010-10-21 14:13:51.000000000 +0000
Koha3.00.00.107Koha DB3.0000107MySQLmysql Ver 14.14 Distrib 5.1.53, for suse-linux-gnu (i686) using readline 6.1OSLinux koha-test 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 i686 i386 GNU/Linux
Perl5.012003Or
Trying to launch Second Life gives the following error message:
You are running the Second Life Viewer on a x86_64 platform. The most common problems when launching the Viewer (particularly 'bin/do-not-directly-run-secondlife-bin: not found' and 'error while loading shared libraries') may be solved by installing your Linux
This problem was easily found using search with solutions for Fedora 11.
The following information has been found for adding the 32 bit support to Fedora 11 but it does not work in Fedora 12.
The file created in the instructions below is a list of the 32 bit libraries. It is then called as input to yum to simply install them.
"Add the Libraries Next, add the 32-bit libraries by copying the following list, and pasting it into a text file. Save it as �Fedora-ia32.txt�."
Another post says that was all unnecessary as the following commands would do the same thing.
Could have simply been achieved by calling:$ yum install SDL.i586...(Or by selecting SDL.i586 in add/remove programs.)
The problem I have with Fedora 12 are neither of these will install anything in Fedora 12. Looking at add/remove programs does not yield anthing that looks like it is 32 bit support when searching with the argument "SDL".
Does anyone know how to install 32 bit support into Fedora 12 64 bit version ? I like the simple yum expression rather than long lists like the first example uses, but I'll try anything if it works.
A side question to this entire experiment is what chance would you give to Second Life being able to be run remotely using VNC? I would think if it runes on the Linux machine, using a remote terminal would have little impact. Using VNC isn't the usual way this will be run, I just wonder if it would work at all.
after update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I install software called Sunflow v0.07.2 in my Ubuntu. When I try to run it,it says
"API error : JVM available memory is below 800 MB (found 728 MB only). Please make sure you launched the program with the -Xmx command line options". What is that xmx command line.What should i do to run Sunflow.
I just (basically) completely uninstalled my OS by accident. In synaptic package manager I selected to completely remove volume control (which had been going haywire for god knows what reason) with intent to immediately reinstall. I didn't put 2 and 2 together when it said it'd remove all related files including the kernel... hal... restricted drivers... everything got uninstalled. Network manager crashed...
I decided to try my luck with restarting (what was left) of the system. Now I'm looking at a boot screen of:
loading grub...
error 15: file not found.
Did I have to just make a boot disc and reinstall the os? or can I just "put the pieces back together" as it were and reinstall with a 'sudo aptitude update' once I get network up again?
I have a long running 9.10 installation. All of a sudden, on boot, I get this error: "loading initial ramdisk error: file not found" If I hit 'E' at the menu entry, I can scroll all the way to the end of the boot command, and it appears that the last 'c' on 'generic' is missing from the kernel name. If I add the c and hit ctrl-x it boots fine. The grub.cfg appears to be correct, it has the full generic spelled out.
View 9 Replies View RelatedQuote:
Explain the error?
Target F12 mysql - 5.1.42-2
Source FC 5 mysql - 5.0.27-1
I've put SElinux into permissive mode as it was practically denying anything that moved. Both installed from the standard repos. I used mysql-administrator to create a backup of the FC5 server (all databases/tables) and transferred it to the new system. I restored it onto that machine and double checked that my standard admin user (full privs) was present and let me log in to make changes. All good so far.
So I copied over my files from my sites, point a browser at them and I get nothing, not even errors. Now it's a long while since I set the original up and have probably forgotten something simple but despite making the error output more verbose I can't seem to track anything down other than:
[Code]....
So it suggests my tables are invalid/trashed but I can't seem to figure out why. The original server is still running happily so I'm not in any rush to fix this, I'll keep plodding, Phpinfo reveals a normal operational php setup, so i think that side of the sites is functional. Apache test pages work on blank virtual hosts but viewing my sites reveals the favicon working fine but otherwise comepletely blank pages (zero output, even source). I tried running the page as a raw CLI input to the php package using php index.php and php returned nothing, logged nothing unusual but sat with my CPU at 100%, unsure if that is related.
I decided on a whim to pursue certifications in other operating systems (currently 70-620 and 70-290 certified with Microsoft) and bought a book on Fedora 10 and installed it on my extra PC. First issue I ran into was that due to my graphics card being an ATI I needed to run in text mode (based off posts on these forums) then once I finally got everything under control and installed, it loads directly into Command Prompt (you folks call it GRUB right?) I can log in as root but I can't do anything this way.It won't even allow me to do things like accept the end user license agreement or create new users or see the GUI.
View 2 Replies View RelatedI have two files one having some transaction IDs only and sample content as follows:
Code:
SDP-DM-100755485
SDP-DM-100755504
SDP-DM-100755508
SDP-DM-100755716
[Code]....
I get an error loading libraries, even though PATH and LD_LIBRARY_PATH seem to be correct. Here are the details:
[Code]....
I tried to install ubuntu 9.04 from wubi in windows 7 ultimate today. But it failed. I met a problem when installing: An error has occurred setting the element data. The request is not supported. The detailed information in installation log file is:
>>stdout=
01-26 13:29 DEBUG TaskList: # Cancelling tasklist
01-26 13:29 DEBUG TaskList: New task modify_bcd
01-26 13:29 ERROR root: Error executing command
>>command=C:WindowsSystem32cdedit.exe /set {d29666c7-0a4d-11df-a945-002268e2b352} device partition=I:
>>retval=1
>>stderr=An error has occurred setting the element data.
The request is not supported.
[Code].....
The request is not supported. I tried to use bcdedit /set <GUID> device partition=I: manually, but still have the same error.
I tried to come up with a thread title that was specific without being too long or cryptic. Don't think I succeeded. In my PHP error log I keep getting this error over and over again:
Code:
EntityRef: expecting ';' at line 565, column 81
It's very odd to me that it doesn't contain any sort of stack trace or file info. I know which of my virtual hosts and therefore which directory it's coming from, and it's happened now on half a dozen different servers that this site has lived on. So obviously I'm trying to track it down and add the missing ';' to the right file. This directory has dozens of sub-directories and hundreds of files though.
This is the best I've managed to come up with so far:
Code:
find . -type f -iname "*.php" -print -exec awk 'NR==565' {} ;
(I've run it both with and without the -iname filter.)
I get a very large list of files, and some of them display the contents of line 565 after them. I've checked through a number of them there, but haven't found the culprit. Is it possible to limit my "find" command to only files that have at least 565 lines? Is it possible to have it only print matches from line 565 that has at least 81 columns? How would I modify that to print perhaps 5 lines on either side (in case the error reporting is pulling a slightly different line.)
I like running sql queries from the command line.
Code:
sqlite3 foo.db "select * from some table"
How can I specify
Code:
.mode column
at the command line?
I changed my post because I found that solution, and didn't want to bother for that. But, since I didnt find a way to delete the post, I thought of updating it: I am beginning to write the code for the philosophers problem. As you know, they can eat, think or wait for forks. When they have 2 forks, one by each side, they eat. Then they set the 2 forks as available, and think.
Each philosopher is a thread. My problem is that it gives segmentation fault, somehow, when I try to initialize. The thing I really don't understand, is why it sometimes gives segmentation fault on initialization #0!!! (But generally on initialization #1) I have set 5 initializations in total, defined by N, that is also the number of threads I'm working on.
PHP Code: #include<stdio.h>
#include<stdlib.h>
#include<unistd.h>
#include<pthread.h>
#include<errno.h>
#include <time.h>
#define N 5
[Code]....
I have found many information about how to delete/grab a line in a text file including delete line with match a pattern but I did not find info about how to delete a line which match a pattern of a particular column only.
for example mydata.txt:
id type x y z
1 6 0.474611 0.227223 0.583947
[code]....
I tried to install Fedora 12 on my machine using the Fedora-12-i386-DVD and get the following error: /sbin/load_policy:error while loading shared libraries: lib/libsepol.so.1: cannot read the file data:input/output error exec of anaconda failed install exited abnormally [1/1]
View 2 Replies View RelatedJust trying to install Skype on Fedora 12 .. but got an error: skype: error while loading shared libraries: libasound.so.2: cannot open shared object file: No such file or directory So, anyone got it working there ?
View 9 Replies View RelatedI know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
from the commend line i went to compile the c program by giving the commend "gcc first.c -o first" but the commend line showing gcc is not found. iam using fedora 13 pls tell me what can i do to compile the program. the program i used to compile is below
#include<stdio.h>
main()
{
Ubuntu 9.10 64-bit. I was importing photos into f-spot. Then my laptop shutdown because it overheated (a different problem). Now f-spot will not open. A dialog pops up and says "F-Spot Encountered a Fatal Error. Exception has been thrown by the target of an invocation." Here are the error details:
Code:
An unhandled exception was thrown: Exception has been thrown by the target of an invocation.at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000]
[Code]...
I've read somewhere that there might be a bug with themes, but I've changed mine back and forth. I don't really think this is a bug as much as something that happened when the computer crashed. I've tried uninstalling f-spot and reinstalling it, I get the same error above. Anybody have any idea on how to get it working again?
I have perl/tk installed and working. I tried using c++/tk and had to change the #include path in the headers to find the tk.h and tcl.h. I tried compiling a simple c++ program with g++ to test that the headers are correct. the line i type at console is:
g++ test.c cpptk.cc cpptkbase.cc -o test.bin
I fixed all previous errors, except for the following.
code....
I want to compile ekiga 3.0.2 for ubuntu 10.04. But when I enter 'make' command in the terminal windows, it says that;
[Code]...
I tried to solve the problem by setting CFLAGS = -fexceptions, in the Makefile. But it didn't work.
While loading application programs throgh shell prompt, error message as shown below is coming on the screen
[root@athi disk-1]# ooffice G.O.P.296-07.pdf
Xlib: extension "ATIFGLRXDRI" missing on display ":0.0".
[root@athi disk-1]#
How would i calculate following values.Initial file
10 3
20 4
How would i calculate 3rd column which should be addition of value in 1 and 2nd column.File after calculation
10 3 13
20 4 24
I have a multicolumn datas, like
a1 b1 ... f1
a2 b2 ... f2
. . ... .
[code]...
I would like to make a file with all these data in one column, like
a1
a2
.
.
[code]....
Can it be done with awk or some other command? Also, is it possible then do add another column in front of this one with numbers of the lines (for every previous column), like
1 a1
2 a2
. .
. .
[code].....
I have installed both Windows Xp and Fedora 12. Last time when i was working on Fedora it didn't shut down properly. Now following error occurs and finally the system sleeps.
ata1.00 : exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x0
ata1.00 : BMDMA stat 0x25
ata1.00 : cmd c8/00:00:50:5a:34/00:00:00:00:00/e4 tag 0 dma 131072 1n
res 51/40:7f:d1:5a:34//00:00:00:00:00/e4 Emask 0x9 (media error)
ata1.00 : status : { DRDY ERR }
ata1.00 : err : { UNC }
end_request: I/O error, dev sda, sector 70539985 JBD : Failed to read block at offset 5884 EXT4-fs(sda): error loading journal mount: wrong fs type, bad option, bad superblock on /dev/sda8, codepage or helper program, or other error In some case useful info is found in syslog-ty dmesg | tail or so
My laptop is running Fedora 12. I installed BackTrack 4 onto an external USB hard drive using a LiveCD. Now when I boot my laptop. I get this: GRUB Loading stage1.5. GRUB loading, wait Error 21. I never touched anything with my internal drive. When I was reviewing what partitions the installer was going to format, the swap partition for my internal drive (Fedora) was set to be formatted even though I did not specify this. Fedora never used to show GRUB loading at all. Screen was blank until Fedora starting loading. Maybe this means that this is a copy of GRUB from my BackTrack disc? I ran 'fdisk' to look for anything suspicious and under /dev/sda1 (internal drive, boot partition) it says "Partition 1 does not end on cylinder boundary."
View 9 Replies View RelatedI'm trying to compile a program and it gives me the following:
I checked cmath-util.h:46 and cmath-util.h:48:
I'm not a C person, and the author is unavailable so far.