Fedora Servers :: FC5 > F12 - ERROR: Column Count Of Mysql.db Is Wrong
Jan 31, 2010
Target F12 mysql - 5.1.42-2
Source FC 5 mysql - 5.0.27-1
I've put SElinux into permissive mode as it was practically denying anything that moved. Both installed from the standard repos. I used mysql-administrator to create a backup of the FC5 server (all databases/tables) and transferred it to the new system. I restored it onto that machine and double checked that my standard admin user (full privs) was present and let me log in to make changes. All good so far.
So I copied over my files from my sites, point a browser at them and I get nothing, not even errors. Now it's a long while since I set the original up and have probably forgotten something simple but despite making the error output more verbose I can't seem to track anything down other than:
[Code]....
So it suggests my tables are invalid/trashed but I can't seem to figure out why. The original server is still running happily so I'm not in any rush to fix this, I'll keep plodding, Phpinfo reveals a normal operational php setup, so i think that side of the sites is functional. Apache test pages work on blank virtual hosts but viewing my sites reveals the favicon working fine but otherwise comepletely blank pages (zero output, even source). I tried running the page as a raw CLI input to the php package using php index.php and php returned nothing, logged nothing unusual but sat with my CPU at 100%, unsure if that is related.
#!/usr/bin/perl use DBI; my ($db, $user, $pw) = ('dbname', '****', '***********'); my $dbh = DBI->connect("DBI:mysql:$db",$user,$pw) or die "Cannot connect to $db: $DBI::errstr
[code].....
The error message is
[Wed Feb 24 13:03:27 2010] myscript.cgi: DBD::mysql::st execute failed: Column count doesn't match value count at row 1 at myscript.cgi. [Wed Feb 24 13:03:27 2010] myscript.cgi: DBI::db=HASH(0x8a30c60)->errstr
I am facing some strange problem of mysql replication with ssl, my replications which working fine from more than 6 months currently stopped working after i upgrade mysql in to newver version mysql-5.1.41-2, i create new ssl self singed certs but still no sucess, when client try to connect the master using ssl its gives error SSL connection error ERROR 2026 (HY000), with out ssl its working f9.
I can seeking the problem on net, and i found the below bugzilla url related to that.
[url]
I read it but not get , either new version support x509 ssl certs or not or either new version support ssl replication or not, here below my server configuration for ssl serts
And for client
Both server and clients certs are signed with same ca but still its currently not working after the mysql upgrade first 5.1.41 and then 5.1.41-2
Either as above bugzilla url, currently mysql support ssl replication or not, or either some need to do special for working with ssl. or i wait for newver version of mysql to fix if its bug or not.
At the moment I am having a problem with the MySQL server on my VPS. It's a completely fresh install of both Debian 5 and MySQL but the problem is upon logging in I get:
[root@boris ~]#mysql -u root -p Enter password: ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ] * Starting MySQL database server mysqld [ OK ] * Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I am trying to count no. of characters in a word but it is coming one more than what it actually should be.
Code:
I can have a work around by subtracting 1 from the output (6-1=5 in this case). BUT, I am just curious to know, why the character count is coming as 6 and not 5.
I have a database with the following table (see below). What I need to do is to empty the itype column completely, so that if I do a Select itype from items; it will return empty set. I have tried dropping and recreating the itype column, but it just adds the data I want to insert to the end, and even when I recreate it, it is not empty.. I need to overwrite it, or better, start with an empty column.
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
I am writing a script to mine data from my game server logs which are going to mysql. My first question is syslog-ng is sticking $msg into one colum it self, $msg tends to be a long string here are a few examples:
cn name team frag death flags role host. 0 Maik CLA 2 0 0 normal *.70.233.118. 1 lizardncd RVSF -1 3 0 normal [*.22.247.40] lizardncd fragged Maik.
And they are not always in the same format, How could I parse this data to do something useful, like creating a user stats page with frag counts and flag counts. Should I create a script that runs in a cronjob that parses this data to a new table maybe once a day. Even then the $msg string value is random and I am thinking in terms of awk.
Second. I would like to keep track of what ip's are using what nicknames. Kinda in the sense of and ip associated to a array of names that have been used on that ip address so I can keep track of users. How would this work logically with a mysql db, could a column allow multiple values, then loadable into an array, which then can add, remove, and store to mysql.
I have two different table in a database in mysql that has no share key with each other and I want to sort them with each other on their date time column I mean when I sort it row X of table A that is older that row Y of table B comes earlier.
I'm using MYTHTV with AT&T's U-Verse system. AT&T apparently turns off the set-top box if the box doesn't receive any commands after some number of hours. When this happens the box takes so long to turn on that it doesn't process the lirc IR channel change command. I've rewritten my channel changer to add a lockfile, and added a cron entry to kick off an entry to just "ping" the set-top box once an hour. But, OK, I'd like to play the bandwidth saving game and not do this if there isn't anything in the "record" table.
So, how would I write a script that will check the number of rows in the "record" table in the "mythconverg" database and exit if there are zero rows? I'm afraid I don't know how to even start this. Here is my "keepalive.sh" script that does the pinging:
Code: #!/bin/sh #if there are no rows in the record table, just exit this script # lock the lockfile - MUST be same one as channel lock while [ `lockfile "/tmp/mythchanlock.lck"` ]
I am trying to import a data file from old DOS application into MYSQL table The file is clear text file with fixed-width columns, without column delimiters
Example file : Code: 4444333666666 2222666555555 iiiiwwwcccccc
I seemed to configure my gammu and changed the version indicated version on my gammu table from 10 to 11 to match the version of my sql, upon starting my gammu-smsd the error: gammu-smsd[3429]: Error code: 1054, Error: Unknown column 'Signal' in 'field list' gammu-smsd[3429]: Error code: 1054, Error: Unknown column 'Signal' in 'field list' gammu-smsd[3429]: Error code: 1054, Error: Unknown column 'Signal' in 'field list' Kept on repeating on an infinite loop
I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code: the-matrix:~ # mysql start ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or Code: the-matrix:~ # rcmysql start Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
I already have my laptop as a server using a LAMP server + proftpd and the FTP->MySQL link up. I built myself a new Headless and set up the SSH and VNC on it and all that good jazz. LAMP works and everything. Proftpd+MySQL (using the proftpd-mod-mysql package from repo) doesn't seem to work on this headless box. So I used the tutorial from [URL]... Thinking "I'm using 10.04 - it's close enough". Both came up with the same error. 421 Service not available when I ftp from the localhost. Is their something I'm missing? the Laptop set up (also 10.04) works groovy fine. Also all the log files are blank.
I am trying to get mysql to start at boot without any success.
The mysqld scripts works fine when run from the command line, but it does not work when i use the links created by chkconfig. I checked the boot.log and found that mysql starts but then it stops or gets shutdown. This is the log message:
Starting mysqld daemon with databases from /data/mysql [ OK ] Starting cups: [ OK ] STOPPING server from pid file /var/run/mysqld/mysqld.pid starting DenyHosts: /usr/bin/denyhosts.py --daemon --config=/usr/share/denyho sts/denyhosts.cfg 090727 04:35:47 mysqld ended
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2). I've had this problem to the point where I thought I messed up my actual configuration so bad that I reinstalled Ubuntu to get rid of all the MySQL configuration; I ran MySQL through Windows with a breeze, but I'm getting some errors like that after restarting my computer just a few minutes ago and I have not changed anything in my SQL settings. I'm on Ubuntu 10.10 64 bit and running MySQL 5.1. the actual error that I get from Navicat and from the website is at [URL]... Update: 20110402. Connection for controluser as defined in your configuration failed. Just got that when I tried to log in to phpmyadmin.
I've a physical machine with FC9 running vmware server 1.0.6 with 2 virtual machines. Each virtual machine is also running FC9. Everything was running smoothly until one day, one virtual machine stop. I've checked /var/log/messages of that machine and it says:
Code: "no space left on device" . I try to create a file Code: touch dd and the answer is the same.
The odd thing about all this is that the machine (both virtual and physical) have enough space left. This is the space available reported by df -h. Physical machine
Code: [root@halwifi hotspot]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 228G 38G 179G 18% / /dev/sda1 190M 19M 162M 11% /boot tmpfs 1010M 96K 1010M 1% /dev/shm and the Virtual Machine
set up incremental backups with crontab. I just discovered that tar is not actually incrementing the tar files. I first created the tar files, then in crontab I have:
Code: cd /; tar -cpf --incremental --exclude-from=/root/ExcludeFromTar.txt mnt/PATRIOT/bkp/home.tar home
I only just discovered that this creates a file whose filename is "/--incremental". I also tried using tar's -G switch instead of --incremental:
i ,musing mysql5 at fedora12 i have just installed it but i ,m using mysqladmin -p root password mypassword it says ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'mysqladmin -uroot password 123456' at line 1
I have installed both Windows Xp and Fedora 12. Last time when i was working on Fedora it didn't shut down properly. Now following error occurs and finally the system sleeps.
ata1.00 : exception Emask 0x0 Sact 0x0 SErr 0x0 action 0x0 ata1.00 : BMDMA stat 0x25 ata1.00 : cmd c8/00:00:50:5a:34/00:00:00:00:00/e4 tag 0 dma 131072 1n res 51/40:7f:d1:5a:34//00:00:00:00:00/e4 Emask 0x9 (media error) ata1.00 : status : { DRDY ERR } ata1.00 : err : { UNC } end_request: I/O error, dev sda, sector 70539985 JBD : Failed to read block at offset 5884 EXT4-fs(sda): error loading journal mount: wrong fs type, bad option, bad superblock on /dev/sda8, codepage or helper program, or other error In some case useful info is found in syslog-ty dmesg | tail or so
I set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
Quote:
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Query :-
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ? b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user) c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
I've setup a fedora core 13 server and I am running mysql on it. I wanted to use MySQL Workbench on my Windows 7 computer on the same LAN to connect to the database. Currently I am unable to connect to the database except if I go through ssh. What ports do I need to open on my firewall? Is there any specific configuration that I need to do to my MySQL database to get it working?
I have recently installed centos 5.6an app i have needs to run php 5.3 so i upgraded by adding a repo and using yum install php53*a php -v gives me this.PHP 5.3.3 (cli) (built: Mar 30 2011 13:51:41) Copyright (c) 1997-2010 The PHP GroupZend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologiesi also need mysql 5.1 so i picked a repo that had the 5.1 version of mysql in it and um install mysql*which gives me this.[root@localhost var]# mysql -Vmysql Ver 14.14 Distrib 5.1.52, for redhat-linux-gnu (i686) using readline 5.1and then tri to run my app and it failsthe only difference i see between the server that is current working and the new one is in the phpinfo file.in the mysql section of the working one it says Client API version. 5.1.xin the new server install it says the following which is still point to the client api or 5.0
mysql MySQL Supportenabled Active Persistent Links 0
I have a pool of approximately 1,000 Linux servers and I would like to get a total count of reboots that occurred on those servers each month. I would like to collect this reboot count at the end of each month. Can anyone tell me what the best way to get this count.
