I decided on a whim to pursue certifications in other operating systems (currently 70-620 and 70-290 certified with Microsoft) and bought a book on Fedora 10 and installed it on my extra PC. First issue I ran into was that due to my graphics card being an ATI I needed to run in text mode (based off posts on these forums) then once I finally got everything under control and installed, it loads directly into Command Prompt (you folks call it GRUB right?) I can log in as root but I can't do anything this way.It won't even allow me to do things like accept the end user license agreement or create new users or see the GUI.
I just installed a fresh install of 9.10 on my amd64. when it starts it locks up right away. i know that this has to do with my nvidia card. i've had to do this in the past. but since it locks up i have no way to get into the command line. ctl-alt-F1 does not work. is there a way to just have it boot right to the command line without loading up gdm?
I need to execute evince from command line or from a shell script and open it directly in full screen, or start some program for presentation.
I mean:
$ evince (this opens evince) $ evince /dir1/dir2/file.toview (this opens evince and the file.toview but not in full screen) $ evince /dir1/dir2/file.toview 'in mode presentation'
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
I have a problem with trying to capture sound through the input jacks on my computer. The sound plays through from the inputs to the output, and it's volume is controlled by alsa mixer, but no programs can pick up the stream, including the PulseAudio and Gnome Volume controls.I have tried many of the suggestions to be found in these forums for sound issues, including removing Pulse, configuring the model in alsa-base.conf, and messing with every setting I can find.Here are the outputs from the commands from the troubleshooting guides:
Code: lspci -v | less 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio
I may need to handle a Red Hat server soon and thought that has the same command line.Where do I start if I wanted to learn the command line? Especially, how do you connect to a Redhat / Fedora Server using console on windows and do C programming
i recently did some changes to my hard disk partitonand now linux is in hd0,6when i booted my pc,i got the grub commmand line interfaceso,I think that i need to edit grub.conf in fedora 14then at cmd i did this:
grub> root (hd0,6) grub> kernel (hd0,6)/vmlinuz file not found
I have access to backup server via rsync protocol (only rsync, nothing else). Now, I want to fetch file from there (which is .tar.gz) and pass it directly to tar command, without saving the archive in local filesystem. To visualize, with ssh access I could:
ssh remote_host cat backup.file.tar.gz | tar xzf - And I will get uncompressed backup locally, without actually storing .tar.gz on local machine. Is it possible to achieve when using rsync?
When I do System > Applications > Update System, it brings up a list of updates, and can tell me what each update is meant to fix (i.e. "fixes a bug in the flux capacitor so time travel works again (CVE-01234)"). How do I get similar info from the command line- I can't get it through yum, can I?
I'm experiencing a peculiar problem with Fedora 12. There is a ten-second delay when various command-line applications (e.g. ssh, wget) connect to remote machines for the first time. The delay is also seen when the remote machine name does not exist.Subsequent connections to the same remote machine are immediate.This isn't a DNS delay - the host and dig commands return immediately, for both existing and non-existant hostnames. It's not a reverse DNS lookup by the remote machine either: other Fedora 10 machines do not experience this delay and neither did my two Fedora 12 machines when they were running Fedora 10.
time this was something to do with nscd, the name service caching daemon. Stopping nscd changes the delay to five seconds, but subsequent connections are no longer immediate - there is again a 5 second delay. This implies that nscd is caching the names correctly.The delays are always precisely 10 seconds, or 5 seconds when nscd is not running. I have confirmed this with the time command. There appears to be no odd network traffic (tested with tcpdump) and nscd appears to be running normally. I've confirmed this with a Fedora 12 live CD as well - nscd is not started at boot, but once started, the machine behaves in exactly the way described above.
with that said i burned fedora 8, 10, and 11 checked the sha1 verified everything was fine i had originally installed fedora 8 on an old pc i had from windows XP without any problems messed with it some, upgraded to 10 again no problems. tired to update 11 got a message about ext3 not found ext4 not found, re installed 10 the loader loads up now i have a blank screen with a cursor it the left hand corner
again i had 10 installed fine prior to all this can any one point me in the right direction to solve this issue or am i way over my head trying to figure this stuff out. i have spent 3 days searching these forums.
i'm just not quite sure what i need to do. oh, i tried to install 8 again and it wouldn't take either. i think the 10 problem has something to do with the graphic driver it's a geforce 7400 nvidia and something to do with the grub, but like i said i get a blinking cursor and not quite sure how to access the grub or command line.
I've been working in a program in BASH and would like to measure its efficiency in different machines. Of course I am able to display the date at the beginning and at the end of its execution, but I'd rather use some sort of timer function to measure in seconds its speed. Is there any timer function available through command line?
I use F13. How can I control the volume of my desktop ssh'ing into it from my laptop?
I use the laptop like a remote control to control my desktop through vnc while watching movies, but changing volume through this setup is a bit too cumbersome and clumsy. I tried alsamixer but it behaves strangely and doesn't change volume.
While trying to download themes for fedora 12,I get to the end it ask for my PW (in sudo) then says it is incorrect.When in graphic inter phase all my passwords are excepted.I've been reading the linux manuel. but can't find the anwser.If I am to put anouther password in where do I do that and how.
I have a list of domains in "domains.txt" , and I wanted to put an "nslookup" in front of each line and run it.. However I could not figure out a command for it.. Any ideas how to do this simple task?
I have a couple of backup scri ts. I use a rather cumbersome method to backup evolution. I finally realized I can backup evolution easily from its File Menu. Can I do this directly from the command line, so that I can use it in a script?
My USB ports are not easily accessible from where I use my PC, Sometimes, I eject or unmount some USB device, only to realize that I forgot to copy or delete some file. I don't want to get up, go to the CPU, unplug and replug the USB device, go back to my sit. I don't want to execute some boring mounting command as root just to mount this particular device. What I want is a fast command that just rescan my USB ports and mount everything where it should be, as if I have make the effort of standing up and unplugin and repluggin the USB device. Does this command exists
I hosed my installation of F14 by installing from some "experimental" repositories. Now I only get XDM at startup and an xterm on login. This would be fine if I could use yum to do some updates, but I have no network connection. I have been over the man page for nmcli dozens of times and none of the options there seems to start anything. I have also tried starting dhclient or using:
ifconfig eth0 up Nothing. So, is there a reliable way I can just connect to the network? This shouldn't be so hard.
I just installed new Fedora (F15) and I could not figure out how to suspend or hibernate from command line as user. The method I used in previous versions does not seem to work:
Code:
What is new method of command line suspending and hibernating as user?
I am using Fedora12 on desktop. I tried to change keymap from systm->preferences->keyboard->layout. This changes my keymap successfully. I want to perform above activity using command line for my powerpc target. My powerpc target environment do not have KDE,GNOME or any x-windowing support. which command and which files to be overlooked for this?
I want to change keyboard layout not keymap from command line.
I have the following shell: export PATH=/u01/app/oracle/product/10.2.0/db_2/bin:/usr/sbin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin ftp -u -v -n -i > /bk01/exports/FTP_OUTPUT.LOG <<EOF open 197.0.0.78 user orabackup orabackup cd /media/disco/BK_Oracle bin put FILE00001.LOG put FILE00001.DMP quit EOF
Executing the shell from command line, the output is: Connected to 197.0.0.78. 220 Bienvenido al servicio FTP del servidor backup. 530 Please login with USER and PASS. 530 Please login with USER and PASS. 331 Please specify the password. 230 Login successful. 250 Directory successfully changed. 200 Switching to Binary mode. local: EXPO_APOT10G_20100531.LOG remote: EXPO_APOT10G_20100531.LOG 227 Entering Passive Mode (197,0,0,78,200,162) 150 Ok to send data. 226 File receive OK. 127498 bytes sent in 0.0022 seconds (5.7e+04 Kbytes/s) local: EXPO_APOT10G_20100531.DMP remote: EXPO_APOT10G_20100531.DMP 227 Entering Passive Mode (197,0,0,78,175,141) 150 Ok to send data. 226 File receive OK. 458190848 bytes sent in 6.1 seconds (7.3e+04 Kbytes/s) 221 Goodbye.
Executing the shell from cron, the output is: Connected to 197.0.0.78 (197.0.0.7. 220 Bienvenido al servicio FTP del servidor backup. 331 Please specify the password. 230 Login successful. 250 Directory successfully changed. 200 Switching to Binary mode. local: EXPO_APOT10G_20100531.LOG remote: EXPO_APOT10G_20100531.LOG local: EXPO_APOT10G_20100531.DMP remote: EXPO_APOT10G_20100531.DMP 221 Goodbye.
Why from cron the output no show the statistics in red ...?
Few day back I have installed fedora 15 in my system with gnome desktop environment. when i was using fedora 11 I used to login via command line by changing the /etc/inittab from run level 5 to run level 3 . once if i login when ever i need GUI, simply i will type startx command , but when i tried to change the runlevel in fedora 15 , It was confusing to me , there is no 1,2,3 is there . how can i change to command mode login in fedora 15..?
