OpenSUSE :: Dolphin Error Message 'The File Or Folder /.local/share/Trash/files/IMGP1676.DNG Does Not Exist'?
Feb 10, 2011
Every time I try to empty the waste bin I get dolphin error - 'The file or folder /.local/share/Trash/files/IMGP1676.DNG does not exist'I tried to recreate the file 'IMGP1676.DNG' , deleted it i.e. sent i to the waste bin and then tried the empty waste bin again, although this time it was there and deleted it still reported the same error.du -h .local/share/Trash/files/ 12K .local/share/Trash/files
After removing GDM, XFCE4, and the crap-load of dependencies that came with it, something must have gone wrong. I can not place items nor delete items any more. How do I fix this problem of mine? I'm using KDE at the moment.
Code:
Could not make folder /home/theif519/.local/share/Trash
Deletion of files is necessary. I have installed libtrash hoping it'd work, but it didn't, I even did chmod 755 like it suggested I do. What do I do?
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
I have Ubuntu 10.l0 installed on my laptop. I recently install the KDE desktop from the Software Center. Today, I noticed something strange. I tried to move a file to the trash when I got this error message: "The trash has reached its maximum size! Cleanup the trash manually." I don't have any files in the trash. I went back to Gnome, and was able to delete the file. I opened up Dolphin while still in Gnome, and couldn't delete anything, so I know that this isn't a KDE problem
I recently have been trying out the Ubuntu live CD.
I have a shared computer where some are suspicious of anything other than Windows. The live CD is an excellent way forward.
As I understand it Ubuntu is loaded into the computer RAM, thereby it makes no actual changes to the computer as it does not load into the hard drive.
I have noticed that if I have been doing work on the computer and forgotten to empty the trash, when I run the live CD on another occasion this material is still in the trash.
Is data put into the trash saved to the hard drive?
It does not matter to me if it is as long as I have deleted it but I would like to know where it goes if it does save to the hard drive.
I just set up my firewall, and now I can't see any Samba workgroups. It says it can't find any workgroups on my local network, and it may be caused by a firewall. It is a firewall issue because if I disable my firewall, I can see the workgroup. What do I need to open on my firewall to see the workgroup? I am using Slackware64 13.37.
Here is how I set up my firewall.
Code: iptables -P INPUT DROP iptables -P FORWARD DROP iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -s 127.0.0.0/8 -d 127.0.0.0/8 -i lo -j ACCEPT iptables -A INPUT -p icmp -j ACCEPT I got the commands from here url.
I'm trying to setup a Samba share for our work. I have it almost complete, however I can't successfully share editable files between users. The issue I'm having is that say User1 create a file test.txt, because of the 755 permissions, then User2, who has "writable" rights as per the smb.conf file, cannot edit that test.txt file.
Whevener I create a file with a user, its locked by that user. Is there a way I can set it that every folder/file a user creates is 777 ? I firgured that there's still security because of the "Valid users = " field in the smb.conf file.
I have ubuntu 10.04.1 and a H.P.psc 1311 all-in-one printer scanner.Printer works ok but when trying to scan,with xsane,it goes through the scanning process and an image of the document comes up on the screen.
When I try to save this image to desktop or file/folder whatever I get the message; "Child Process Error. Failed to execute OCR command:GOCR:no such file or directory."
i am using dolphin 1.5 in kde 4.5.2. whenever i try to access movie file from remote samba server. dolphin copies the movie file to somewhere in local hard disk. so, i have to wait until a big file transferring complete. i know that it happens when i open .avi using mplayer. if i open the same remote file with kmplayer, it will player immediately instead of making local copy first. however, kmplayer is very slow and sounds and video stream breaking up, (i am sorry i do not know right english expression for this) i suppose this is not related to mplayer configuration. this seems to be dolphin problem. can i make dolphin to stop copying samba share to local disk and play instantly? there is a video in videos. it is comparing how dolphin and nautilus act differently when i play remote samba share movies.
This seems like somewhat of a n00b question, but I'm kind of stumped and working on a half a dozen other things at the moment, so I thought I'd go ahead and ask it.
Is there a "correct" way to set up a shared folder between two local users using only EXT4 that will allow both users read & write access to everything in the folder?
Here's my scenario: My wife and I use the same computer. I want two separate user accounts (mine and hers), but I want ~/Music to point to the same location for both users so that I don't have to duplicate all of the files.
Too protect the innocent, I'll use Jack and Jill.
So say Jack downloads or rips an album:
"/home/jack/Music/Radiohead/Ok Computer"
I want Jill to be able to able to create a folder:
"/home/jill/Music/Radiohead/Hail To The Theif"
I know the basics of symlinks so I can get /home/jack/Music and /home/jill/Music to point to the same place. I also have Jack & Jill in the same group.
The problem I'm having with my test setup is when Jack creates "/home/jack/Radiohead", it is set up to where Jill can read, but not write. So she can play songs from Ok Computer, but if she wants to download Kid A, she has to go in and manually change the permissions on Radiohead first.
Also, while I might set up multiple directories this way, what I DON'T want is for Jack to be able to modify /home/jill/otherdir where otherdir is just a regular directory set up with default permissions.
Oh, and as an added bonus, it would be nice to set up another account (i.e. a "guest") with limited permissions that can read, but not write/modify.
I am looking for a way to set a default for new users for the akonadi mysql.conf file that is created for each user for the akonadi database. Usually this file contains a inno_db_log_file_size of 64MB. Because of this the database eats up 64MB storage even if its still empty. I would like to decrease this size globally for each "new" user since we have very tight storage restrictions on our NFS home directories now. And 64MB make up already have the quota each user has. So this is to much. where is this default mysql.conf file taken from?
I found hints that there used to be a /usr/share/config/akonadi/mysql-global.conf file that was simply copied but I cannot find such a file on my 11.4 system. It seems things have changed. how akonadis user specific mysql.conf file in ~/.local/share/akonadi/ is generated for a new user? How can I use my own template file here?
I've just installed Ubuntu 9.10 and Samba 3.4. I've shared a folder and have accessed the share from a Windows 7 client. However, I've struggled to configure the share and folder so that the Win7 client can create files and/or folders in the share. Kept getting Permission Denied errors. Finally, (using Webmin) I set the permissions on the file folder so that "Other" had write access. I don't understand why this was necessary (and how unsecure this is). I already had the write access checkbox ticked for "User" but it wasn't enough.
1. I have Ubuntu 10.04.1 installed alongside Windows Home premium 7 on a Compaq CQ5110f with 2 dual processors, 320 GB HDD, 4 gb Ram, less than a year old/ It is giving me some error messages. It is wanting to lock the drive or various programs after being left unused for a few minutes, I have not found where I can disable this. I do not need passwords, really. I am the only user. I reinstalled it once, on top of itself (Ubuntu) and it worked fine briefly, then started doing it all again.
I use to sometimes install Ubuntu as a windows app. on a previous version, maybe 9.04 - 9.10, but think I can not do it on this version?
So, Can I install as WIndows app on this version of Ubuntu? CAn I install Ubuntu on one drive alone, and windows on the other drive alone, install both in same computer and get dual booting? I think before, to do that I had to reset boot drives in BIOS to whichever I had the OS I wanted to use?
Or MUST they be installed on same drive for dual booting to be available?
I am attaching screen shots of the messages I get, etc. I have tried to share files and folders, but it does not allow me to select Share this folder as some security thing is not installed, And the time I am required to enter password to use comp[iter after being idle a few minutes, seems to be tied to my folder, which is JOHN. I may have to think about removing Ubuntu from this drive, add a SATA drive and use two, one for Windows and one for Ubuntu.
I have been having off and on issues with my samba file shares. I am sharing a NTFS formated hard drive where the mount point is in my home directory, as well as a printer connected via USB. I am to the point where printing works (using it as an ipp print share, samba is configured for it, but I don't know if it works or not), and I can access the shared folder from Windows, but I can't access the shared folder from any Ubuntu machine. I get the error:
In my Downloads folder I have a message that says "Personal File Sharing You can receiee files over Bluetooth into this folder"I can't figure out how to get that to go away.
I want to install kindle in kubuntu. I seem to have successfully installed wine and and added ms explorer.exe. but when I click on Browse C drive... Unable to run the command specified. The file or folder file:////Documents/.wine/dosdevices/c: does not exist.
Tried running simdock from software center...uninstalled because I was getting this error after trying to run ap "Can't load image from file '/usr/share/firefox/icons/mozicon128.png': file does not exist."
There is this bug in the latest version of Ubuntu, which is also Jessie, which is:
Can't copy a file from SMB share to the local file system: Software caused connection abort
The problem, apparently, is that newer versions of Samba hit servers with multiple requests at the same time, and for some reason the Zyxel and Iomega boxes can't handle this. The best solution they've come up with is to modify the smb.conf file on your server to include this setting: "max mux = 1".
Here is the reference material on this bug: [URL] ....
People who develop samba have fixed it in the latest version but neither the ubuntu nor Debian have released the fixed version of nautilus, as of yet. Here, is the reference: [URL] ....
I am used to Ubuntus simple sharing with samba. Just install it, reboot and then share the files.Then do I klick on network folder and see all the shared files on the computers in the network.
How do I install it so I only need to go into network folder and see the other computers shared files.Then, how do I share files?
I hope it's not so difficult and that I have to change i config-files.
I want to have a shared area for movies, music, etc. where files are available for all users. What is the best way to do this? I've tried a few different things, (ie. creating a folder and sharing it among a group, but for some reason it doesn't seem to work the way I want it to. I'm now thinking maybe have a partition like /share and set the permissions to all in fstab, but I'm not sure.
I have recently been attempting to install GASP for Python. After several attempts I finally managed to find the .tar file, since yum's GASP was severely outdated. After downloading, I have to extract the file to /usr/libexec/perf-core/scripts/python/, and once I tried to do so in the Ark package manager, nothing would extract after several attempts. I then tried to move it in the Dolphin FileBrowser and got this error message:
Access denied to /usr/libexec/perf-core/scripts/python/gasp-0.3.3.tar.gz.
After much googling and FAQ searching, I have had no results.I am running Fedora 14 KDE build,and have been doing so for about about a week,without any previous Linux experience, so it is probably user error.
On a KDE4 environment after downloading some music from rapidshare with JDownloader the archives self-extracted with the symbol in some of the file names. Those files couldn't be renamed or deleted, the file manager said that the files didn't exist - very weird. The files should have had some swedish characters in their file names. Now I'm stuck with those files on my machine. Anyone knows how to get rid of them?
Does anyone know how to add a fully working (icon changes) Trashcan to the Desktop Folder View?I don't want the plasmoid/widget on the Desktop or on the Task Manager Panel.I can right click -> Create New -> Link to Location(URL), but the icon doesn't change.If the Desktop Folder View is a plasmoid, I guess I'm asking can a plasmoid (trash can) run inside another plasmoid (desktop view) %-)
I have iMac 2.4GHz with rEFIT installed. I installed Unity on one of the partition. Kernel is still 2.6.38.8. I am getting error message when I run the command sudo gedit /etc/x11/xorg.conf
The error message is
(gedit:2139): Gtk-WARNING **: Attempting to store changes into `/root/.local/share/recently-used.xbel', but failed: Failed to create file '/root/.local/share/recently-used.xbel.AC7YXV': No such file or directory
(gedit:2139): Gtk-WARNING **: Attempting to set the permissions of `/root/.local/share/recently-used.xbel', but failed: No such file or directory
I've discovered that Dolphin seems to lose random files when copying many large folders.
I first noticed this a few months ago when I tried to copy my music library from one folder to another on the same HDD. It consisted of around 600 folders and 6500 files. During the copy there were no errors but after the copy I found that some of the newly copied folders were missing files. I put it down to human error or a glitch.
Yesterday I tried to copy 13 folders containing rips of some of my DVDs. Each folder basically had one film of either 700MB or 1.4GB. Again no errors showed up during the copy but I found 3 of the newly copied folders were empty.
It's not so critical with music or films but I can't afford to lose work data like this.
Has anyone experienced or seen a similar problem with Dolphin? I'm going to have to do some more extensive testing but this is not good.
The first time I noticed the problem I was running KDE4.3.4 (I think) and now the latest was with KDE4.4.0.
mplayer complains about not being able to find libvdpau_nvidia.so. I checked in /usr/lib, and it's there, but it's a link that points to /usr/lib/vdpau libvdpau_nvidia.so. The folder vdpau doesn't exist.
Which package do I need to install to get this to work?
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I would like to configure my system to do the following. Previous versions of ubuntu did some of this but now I cant seem to get this working.
1.Browse other Ubuntu systems on the local network by default. Avahi is install on my systems but they cant see each other.
2.From the GDM screen log into another PC. I had this set up in the past so from my laptop I could log into my server almost like terminal services. How do I set this up again?
3.Share files on the local network easily. How do share file with other pc on the network if I don�t want to use samba? What happen to NFS in Ubuntu?
