Red Hat / Fedora :: 550 Permission Denied Error Message (Cannot Upload File)
Jun 1, 2011
I have got centos 5.3 running on my system. I have installed vsftpd and created a separate folder to upload files (upload folder created in/var/ftp/pub). From my client end I can download ftp files but when I try to upload files from my client I get a error message 550: permission denied. The upload folder has full permission ie 777. Checked the ftp config file everything looks ok.
ftp config file
12 anonymous_enable=YES
15 local_enable=YES
27 anon_upload_enable=YES
View 3 Replies
ADVERTISEMENT
Apr 9, 2010
I ftp into the server and see the files, but when i try to make a directory or upload a file it returns an error saying that permission is denied.I am wanting the users to be able to log on with their user account and then be able to have full control over their directories. What can i do to fix this problem?I have enabled port forwarding for ftp. What else is there i can do? If you need any extra information, let me know! I would like to get this fixed asap!Here is my vsftpd.conf file.
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
[code]....
View 4 Replies
View Related
May 15, 2010
I have a problem with uploading any file to my Suse 11.1 with vsftpd. The active (not commented out) settings in my /etc/vsftpd.conf are:
dirmessage_enable=YES
chroot_local_user=YES
local_enable=YES
anonymous_enable=NO
syslog_enable=YES
connect_from_port_20=YES
pasv_enable=YES
listen=YES
ssl_enable=NO
And I added umask 022 to the user login script problem I have: I login with user and password that exists as a local user on my suse machine. I can read and download from my homedirectory, but I cannot upload with filezilla. Then I get the error: 550 permission denied critical file transfer error
View 3 Replies
View Related
Feb 8, 2011
I've just set up keys using
[Code]...
View 5 Replies
View Related
Jul 8, 2011
I am trying to use Wireshark and on startup the program pops up a window saying:
Couldn't run /usr/sbin/dumpcap in child process: Permission denied
Are you member of 'wireshark' group? Try running 'usermod -a -G wireshark <username>' as root.
I ran the usermod command to add my account in the group and checked it
Code:
less /etc/group
wireshark:x:490:myaccount
but the same error message pops up.
View 3 Replies
View Related
Jan 7, 2010
I have proftpd @ Ubuntu 9.04 server. It authenticates users via Auth file, e.g. those are "FTP only" users, not real linux users. Each of them has assigned home dir in the same auth file. They also get Chrooted into it, e.g. default dir is ~ in proftpd.conf They can connect and download files successfully, however, they cannot upload anything or create directory: 550 permission denied error.
When I login via ssh and change user to proftpd user, I can create directories in that particular place, so I guess it's not Linux permissions problem? Or is it? /var/log/daemon.log is the place where proftpd stores its logs, but I cannot find anything relevant there
View 5 Replies
View Related
Oct 23, 2010
[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
View 3 Replies
View Related
Jul 9, 2009
Is it possible to change the general permission denied error. I have some rather young users on this system that think they can "hack the gibson" and I would love to change the general error message to something a little more rude/funnyex:# cd restricted area
-sh: cd: restricted area: Permission deniedI am curious if its possible to change the error message in general?ex:# cd restricted area-sh: cd: restricted area: (funny/rude message goes here)Quick info:This is a Gentoo 2008.0 system, I would also love to do this on my slacware and OpenBSD boxes as well just for kicks.
View 2 Replies
View Related
Jan 11, 2011
I have an old Creative Nomad Jukebox Zen Xtra, and I installed Gnomad2. When I plug the usb cord in the Zen lights up.
Using the Gnomad2 rescan menu, I get the error message Usb_open: Permission denied.
How can I correct this?
View 6 Replies
View Related
Apr 22, 2011
I am in the www-data group...
Code:
mike@webserver:/var/www$ groups mike
mike : www-data adm dialout cdrom plugdev lpadmin sambashare admin
when I run ls...
Code:
mike@webserver:/var/www$ ls -la
total 8
drwxrwxr-x 2 www-data www-data 4096 2011-04-22 09:30 .
drwxr-xr-x 14 root root 4096 2011-04-20 18:22 ..
-rw-r--r-- 1 root root 0 2011-04-22 09:24 index.html
I assumed that means that the users in the www-data group can read, write and execute within this folder?
But when I try to create a new file/dir I get permission denied message.
I'm having fun messing around with my new LAMP server, but this problem is annoying me now .
(Oh and the index.html file was created by root, it's a blank file and can be deleted)
View 1 Replies
View Related
Feb 1, 2010
I've got that vsftpd running on a ubuntu 9.10 machine. Although I cannot upload any file, I always get a "550: Permission denied"-error.
Code:
# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
[Code].....
View 8 Replies
View Related
Dec 4, 2010
Im trying to move some files from my desktop to /usr/share/ProjectM Project M is a visualization program, and Im trying to move some presets I downloaded there. The error I get is
Code:
There was an error moving the file into /usr/share/projectM/presets.
Error moving file: Permission denied
I am logged in as administrator, why can't I move these files?
View 7 Replies
View Related
Apr 21, 2010
I am wondering why running this file:
Code:
-rwxrwxrwx 1 root root 1247 2010-04-21 18:25 autorun.sh
by issueing this command:
Code:
./autorun.sh
results in this message:
Code:
-bash: ./autorun.sh: Permission denied
I'm logged in as root and prior to the above I did a chown root:root on the file.
View 3 Replies
View Related
Jan 17, 2010
Quite a few times i have boot puppy linux live and have tried to copy file from the underlying NTFS windows HD only to get an error like permission denied when i try and copy a file to say a USB stick, i think some files copy but i seem to get permission errors with some files.
View 1 Replies
View Related
Apr 6, 2011
I have created a new file system (fuse) which works fine and is mounted in the local host. I want to be able to mount it from another host. I added it to /ect/exports: /mnt/ltfs *(rw,sync) And restarted nfs. Then from my client host I type:
mount -t nfs myHostName:/mnt/ltfs /mnt/data1
Where /mnt/ltfs is on my local host and /mnt/data1 is on the client host. Note that this is a "FUSE" file system so here is it's local "mount" output: ltfs on /mnt/ltfs type fuse (rw,nosuid,nodev,default_permissions,allow_other) Note thet this is of type "ltfs" but I am told that it should work like its a nfs. ltfs uses fuse under the covers.
View 1 Replies
View Related
Aug 2, 2011
I had Fedora 8 installed in few clients and a server (same server for NFS and NIS), and NIS and NFS configured, and was working fine. Yesterday, I upgraded few client computers to Fedora 15 (server is still same), and configured NFS and NIS client. NFS is working fine, I can see home directories.
For NIS: ypwhich, ypcat passwd gives me correct uutput, ypbind is running. The problem is, I can't login to NIS client. The error is: Permission denied, please try again. My nssswitch.conf is
[Code]...
View 2 Replies
View Related
Jan 20, 2010
This is weird, today I updated my system and while trying to visudo from single user mode got
"cannot read /etc/shadow: Permission denied"
which kept me from doing anything until I switched to file permissions of 400 on shadow, then back. Is this being experienced by anyone else or just me? /etc/security/limits.conf doesn't seem like it wants to change in enforcing mode either and I can't find any alerts to provide clues on the situation.
View 8 Replies
View Related
Nov 26, 2010
I have a ubuntu server 10.04 with LAMP installed. I also have ubuntu 10.10 on a laptop and can copy files to the server fine. To keep my website uptodate, I usually use Filezilla without any problems. I have just installed Fedora 14 on an old desktop and set up "my stall" ok. The problem is that I cannot copy any files from Ferdoa to the server due to:-
Response: 550 Permission denied.
Error: Critical file transfer error
I have tried to change the directory on the server "/var/www" using chmod -R 775* and chmod -R 777*, but it makes no difference, the file transfer still fails.
View 5 Replies
View Related
Jan 18, 2011
I installed MATLAB R2009a in my laptop (Fedora 14 x86-64), the installation was succesful but when I run MATLAB (in a console), appears a message: error while loading shared libraries: libut.so: cannot enable executable stack as shared object requires: Permission denied
I find a "solution", execute in a terminal: execstack -c libut.so
I used several times with differents libraries that I needed, but I run MATLAB in a terminal, MATLAB starts in a terminal, only a prompt ">>" and nothing.
View 2 Replies
View Related
Feb 27, 2011
Im trying to run a program but my system won't let me.i used to be able to run executable files without a problem but i can't anymore when i double click the file i get "there is no application installed for executable files" i am unable to check "allow executing file as program" in file properties there is a script file which runs the program but all i get from the terminal is "permission denied"
View 14 Replies
View Related
Oct 17, 2010
I tried removing it and installing again but I still get the same code in the terminal:
[Code]....
View 3 Replies
View Related
Dec 30, 2010
I have two questions.
1- The vfstpd is running on the Centos server. The server is in the same home network. The SeLinux and firewall are disabled. I can use Filzilla from a Windows PC from another computer and connect and see directory listing. There is a user names adminftp and he is a memeber of root group. When I try to upload or download I get an ftp critical error message.
2- How can I install Adobe Acrobat Reader, Flash Player and Adobe Shockwave on this Linux box?
View 15 Replies
View Related
Nov 22, 2010
I just downloaded OpenOffice 3.2.1 from the openoffice.org weebsite. I followed the instructions precisely and everytime ended up in the same error message - 'error: can't create transaction lock on /var/lib/rpm/.rpm.lock (Permission denied)'. I am using Fedora 13.
View 2 Replies
View Related
Dec 7, 2010
I have a shared directory on another machine but I can't get it to mount. The permission denied doesn't say where/which permission is denied. Is it on the remote on on the local machine? The remote has sharing enabled for the shareddocs directory and after I have mkdir'ed the local mount point I open it's permissions too.
The verbose response from mount.cfis looks like this:
mount.cifs kernel mount options: unc=//192.168.1.102shareddocs,domain=WORKGROUP,ver=1,rw ,username=clive,,,,,,,,,,,ip=192.168.1.102,pass=** ******
mount error(13): Permission denied
Refer to the mount.cifs( manual page (e.g. man mount.cifs) The man page does not have a list of error codes.
View 3 Replies
View Related
Jul 19, 2010
I want to install Ubuntu 4.10. But I get error permission denied face. I do not have CD-ROM. How can I do this?Is it possible to install via USB? [URL]
View 2 Replies
View Related
Nov 23, 2010
When trying to mount samba share off of domain member server sysimage in Windows receive error "There are currently no logon servers available to service this logon request". When trying to mount.cifs from PDC to samba share on sysimage receive error "mount error(13): Permission denied".
PDC is ClearOS 5.2 named "dc0"
Samba file server is CentOS 5.5 x86_64 named "sysimage"
dc0 Samba version is samba - 3.5.5-1.1.v5.i386
sysimage Samba version is samba-3.0.33-3.29.el5_5.1.x86_64
dc0 is configured correctly to my knowledge, windows machines can join domain, domain users can log into windows machines, user directories are mapped properly, logon scripts run properly. sysimage ldap authentication is set up as shown in "Procedure 7.1.
[code]....
View 1 Replies
View Related
Sep 3, 2009
I'm trying to set up a Fedora 11 server so that users have only SFTP access. The relevant lines from my "/etc/ssh/sshd_config" are:
[Code]....
I can log in okay, I can type "cd /" and "cd upload", but when I try an "ls" command, I get: Couldn't get handle: Permission deniedand when I try to get the file "junk" (listed above), I get: Couldn't stat remote file: Permission deniedAnyone know what I'm doing wrong?
View 2 Replies
View Related
Dec 2, 2010
I have recently been attempting to install GASP for Python. After several attempts I finally managed to find the .tar file, since yum's GASP was severely outdated. After downloading, I have to extract the file to /usr/libexec/perf-core/scripts/python/, and once I tried to do so in the Ark package manager, nothing would extract after several attempts. I then tried to move it in the Dolphin FileBrowser and got this error message:
Access denied to /usr/libexec/perf-core/scripts/python/gasp-0.3.3.tar.gz.
After much googling and FAQ searching, I have had no results.I am running Fedora 14 KDE build,and have been doing so for about about a week,without any previous Linux experience, so it is probably user error.
View 3 Replies
View Related
Feb 8, 2011
Sudo echo fuse >> /etc/modules
Any idea why that'd yield a "bash: /etc/modules: Permission denied" error? Here's what "stat /etc/modules" says code...
View 1 Replies
View Related
Oct 13, 2009
using a terminal
logged into userMan remotely
[code]
scp /file.txt xxx.xxx.xx:/home/userMan/
[code]
Is the syntax above correct?
I'm trying to copy /file.txt from local machine, to server with userMan
error: /file.txt doesn't exist
View 8 Replies
View Related
