I am running Postfix 2.6.1 on Suse 11.2, and am receiving an error message on my windows machine saying "Recipient address rejected: Relay access denied." If I login to my email on the local machine or via squirrelmail I have no problem sending mail. The output of postconf -n is as follows:
server:~ # postconf -n alias_maps = hash:/etc/aliases biff = no
my server is Redhat as 5 + postfix +Dovecot .when i use smtp to send mail，it can't to send,the system return "relay access denied" ? This is my maini.cf
Code: # Global Postfix configuration file. This file lists only a subset # of all parameters. For the syntax, and for a complete parameter # list, see the postconf(5) manual page (command: "man 5 postconf"). # # For common configuration examples, see BASIC_CONFIGURATION_README
i have been working on setting up an email server over a ddns. All seems to be working (i can email me@my_ddns_domain.com to me@my_ddns_domain.com) except that when i try and send to another email address (some_other_me@other_host.com) i get the error "5.7.1 Relay access denied". The way i tested this is as follows: Code: me@my_ddns_domain:~/$ netcat my_ddns_domain.com 25 220 my_ddns_domain.com ESMTP Postfix (Ubuntu) ehlo localhost 250-my_ddns_domain 250-PIPELINING
i have search for a long time regarding this matter but i couldn't found nothing.... The facts are like this:
1. I have a server on Ubuntu Linux 10.10 with the following modules installed: - Webmin 1.530 - BIND DNS Server - Fetchmail Retrieval - Dovecot - Postfix - a domain (www.domain.com) - the website it's not hosted on my machine
What i did until now:
- establish a local mail network like firstname.lastname@example.org - successfully installed and configure Fetchmail Retrieval. like: email@example.com mapped to firstname.lastname@example.org
2. The problem: Sending an e-mail using a POP3 client like Outlook from an local account! If i use the local address and try to deliver a message outside my local network the following error is sent by System Administrator: Code: Your message did not reach some or all of the intended recipients.
Setup an Ubuntu LAMP server to house a Wordpress site. Everything is gravy but I am having some troubles getting emails to route outside my local network. I have setup Internet and also added my ISP SMTP as a smarthost - either way I get the dreaded Relay Access Denied 5.7.1.
I am using DynDns as I do not have a static IP - not sure if this makes a difference?
I just built an AMD Phenom II Six Core with 4 Gigs Ram a 160Gib / and swap, and (2) Two Tb mirror for Raid (data storage) I had been using DMRAID in the deprecated box but this box has MDADM v3.1.4 - 31st August 2010 from source (on MDADM wikipedia).
I have no permission problems with using the raid and dmraid is un-installed. The raid is working perfectly and is mounted in my fstab with ext4 defaults 0 2 as my options.
I have two exports /media/raid/Test /test
Both show IP and subnet on the showmount -e for the server. I can mount the test just fine on the server. I cannot, however, mount the /media/raid/Test error: mount.nfs: access denied by server while mounting hostname:/media/raid/Test Using dmraid I am able to have the deprecated box export and mount nfs shares from the raid but using MDADM on the new computer, I cannot. I get similar results with pointing MYSQL's data folder to a location on the "/media/raid/Database" (even with apparmor entries).
This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its recipients. This is a permanent error. The following address(es) failed:
email@example.com SMTP error from remote mail server after initial connection: host [URL] [ip address]: 550 Access denied...
I run a mediaserver on Archlinux, working perfectly (or almost). I have set up NFS v3 and that worked for me on these clients:
- Debian Lenny - Archlinux 64bit
Now I've upgraded my Lenny-box to squeeze and I see that 2 of my 3 shared folders (tdone and twatch) are mounted like they should and the third one (media) doesn't come up. A 'mount -a' as root gives this error: mount.nfs4: access denied by server while mounting (null) My relevant fstab-lines:
I set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD mysqladmin: connect to server at 'localhost' failed error: 'Access denied for user 'root'@'localhost' (using password: NO)'
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ? b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user) c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
I run a few sendmail servers that run MailScanner/Spamassassin/sendmail (current versions) on Centos 5.4 and Centos 4.8 These boxes accept mail for a large number of domains (6000+) scan the mail removing spam and then forward the ham to another server for delivery. I am attempting to stop any backscatter that these servers cause by only accepting mail for specific users@domain or for domains with a catch-all account.I currently use /etc/ mail/ access.db as the access map for the domains, but this allows all mail to be accepted for the domain before the attempting to send it on for final delivery which causes NDR and backscatter for those domains which do not have a catch-all account.
I have looked at adding "To:user@domain RELAY" to the access mapand also adding "define(`_RELAY_FULL_ADDR_', `1') " in the sendmail.mc and running make -C /etc/mail but this has no effect on the sendmail.cf file. My understanding is that if I can get sendmail to accept this undocumented feature then all will be fine as I will be able to use the access map to allow mail to those specific users as well as entries of the type "domain RELAY".My second question is: Does anyone have any ideas on how to utilise access map and relay-domains to achieve the same thing?
I was never confident with postfix, but used it for several years now on my own server. I even noted the exact config used. But my old server crashed and I have to build fast a news one and I don't receive mails anymore. Here is the log message when trying to send to me from gmail:
Jun 4 08:06:34 ks3095514 postfix/smtpd: connect from mail-pw0-f50.google.com[22.214.171.124] Jun 4 08:06:34 ks3095514 postfix/smtpd: NOQUEUE: reject: RCPT from mail-pw0-f50.google.com[126.96.36.199]: 554 5.7.1 <firstname.lastname@example.org>: Relay access denied; from=<email@example.com> to=<firstname.lastname@example.org> proto=ESMTP helo=<mail-pw0-f50.google.com> Jun 4 08:06:35 ks3095514 postfix/smtpd: disconnect from mail-pw0-f50.google.com[188.8.131.52]
The main.cf file is the openSUSE default one (see below). Part of my problems seems to come from the reverse. I *could once* receive one test messsage to " ks3095514.kimsufi.com" (the default reverse/domain name) (below, commented out), but not for my own domain (dodin.org). Most of the time the only necessary lines are mydomain, myhostname, myorigin and mydestination, but this don't work anymore. New defaults??. local (from and to the server) mail works, root can send to jdd and I read it from home.
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
I want to implement POSTFIX as our MAILSERVER.I have a couple questions some I already posted here now theres another error regarding on sending recipient in other domain like yahoo.com...using postfix server detected that i have an error on relay which is denied in other domain name...can anyone guide me how to fix it I think i have to update my main.cf.
I just finish install & setup postfix & spamassasin. I can send & received email from my local area network. i already install webmail client & I can send received. When using my pda from outside my network I can received but I just can send email to my domain only. For other domain it's error relay access denied. Here my postfix configuration.
i am trying to get postfix to relay through my isp's smtp server, but i am getting an error.Host or domain name not found. Name service error for name=mail.grandecom.net type=A: Host not found, try again...i can send mail inside my domain, but when i try to send an email to a test gmail address i find the above error in the log.
I cannot install files from source (tar.bz, tar.bz2, tar.gz, etc) my latest attempt began at tuxfiles. following the 'tutorial', if you will, I managed to unpack the files; but when it came to the ./configure step, I got the following error: zsh: no such file or directory: ./configure
Here I figured different distros, slight variances, so instead I tried putting a space in the command (./ configure), and got this error. zsh: permission denied: ./
So finally I tried both ./configure and ./ configure as su and I still got the same errors... this is the same problem that I've always had when installing from source. I am using Fedora 12.
I have same problem with *.bin files.When I try to install software from *.bin file I see error:
Code: [andrew@notebook Programming]$ ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin bash: ./installbuilder-qt-professional-6.3.0-linux-x64-installer.bin: Access denied [andrew@notebook Programming]$ When I run command ls -la I see this:
Code: [andrew@notebook Programming]$ ls -la installbuilder-qt-professional-6.3.0-linux-x64-installer.bin -rwxrwxrwx. 1 andrew andrew 82624164 Апр 4 16:39 installbuilder-qt-professional-6.3.0-linux-x64-installer.bin [andrew@notebook Programming]$ This error exist if I try to install this application with root access. What I mast do for fix this error?
P.S. I have Fedora 12 x86_64 on my notebook ASUS M51Sn.
I am having difficulties with Pure-FTPD. I had it working at one time. I recently had to reinstall Ubuntu 10.10 because pure-ftpd stopped working for some reason and now I have a fresh install but pure-ftpd still does not work. This is what I did to install it.
Sudo apt-get install pure-ftpd
Using the Ubuntu Spftware Center I installed PureAdmin. I then create a virtual user. Then in the terminal entered the following:
I read somewhere that this could be a filezilla issue and to fix it I need to use active mode and use the filezilla external address [URL]... Of course I did this and the filezilla solution did not work this time. I am fairly sure it is a server issue this time.
running Ubuntu 10.10 and mozilla and seamonkey... Tried to access a website: [URL] and got the error: The page cannot be displayed You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed. Please try the following: Contact the Web site administrator if you believe this directory should allow execute access. HTTP Error 403.1 - Forbidden: Execute access is denied. Internet Information Services (IIS)
I am attempting to Kerborize an NFS server on a RHEL6 machine, but I cannot get it quite right. The error message I receive when executing the following command (as myself, not as root) is:
I have a keytab generated from the KDC for both NFS server and NFS client (both RHEL6 hosts) placed in /etc, and I have configured PAM/Kerberos so I can login via SSH and see I have a valid ticket with klist.
I can login to both NFS server and NFS client via SSH and get a ticket, but I don't know where the problematic NFS permissions reside.
The /etc/exports file on the NFS server looks like:
I have disabled IP Tables on both client and server, and hosts.allow and hosts.deny are not blocking traffic at the moment. On the NFS server.
Here is the output of rpcinfo:
On the NFS client, here is the output of that same command:
I mount a partition to a directory and ls -liah tells me that everyone has read/write/execute permissions on the whole thing, but I try to save a file into the partition and I get an access denied error. First of all this doesn't make sense because ls is telling me I do have access.
Then it gets weirder. I run sudo chown -R me:me directory. The command exits without error, but then when I go and look at the directory again with ls, it still shows up as owned by root and I still have the same problem. This is particularly strange because I am still able to change permissions normally in the operating system filesystem. It just won't work on the mounted partition.
I have been following this guide to install Apache, PHP & mysql - [URL]. When I get up to the step 'mysql -u root' I get given this error: Code: tom@tom-laptop:~$ mysql -u root ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO) How do I overcome this?
I have Samba 3.5.3-61 running on a Fedora Core 13 system. I created a share that is browseable to all systems, and I made sure to create a user account via the smbpasswd utility. When I try to connect to the server from a Windows XP system, I am able to enter the appropriate sharename as well as the username and password.